[media] dvb_frontend: Fix inversion breakage due to DVBv5 conversion

On several places inside dvb_frontend, only the DVBv3 parameters
were updated. Change it to be sure that, on all places, the DVBv5
parameters will be changed instead.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c
index 5f5a0caa450770fe1f19975f4ffe219bda170295..0ab473cc4b17e0454d4b1b975c7444b1eebd8b51 100644 (file)
--- a/drivers/media/dvb/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.c
@@ -288,12 +288,13 @@ static int dvb_frontend_swzigzag_autotune(struct dvb_frontend *fe, int check_wra
        int ready = 0;
        int fe_set_err = 0;
        struct dvb_frontend_private *fepriv = fe->frontend_priv;
-       int original_inversion = fepriv->parameters_in.inversion;
-       u32 original_frequency = fepriv->parameters_in.frequency;
+       struct dtv_frontend_properties *c = &fe->dtv_property_cache, tmp;
+       int original_inversion = c->inversion;
+       u32 original_frequency = c->frequency;
 
        /* are we using autoinversion? */
        autoinversion = ((!(fe->ops.info.caps & FE_CAN_INVERSION_AUTO)) &&
-                        (fepriv->parameters_in.inversion == INVERSION_AUTO));
+                        (c->inversion == INVERSION_AUTO));
 
        /* setup parameters correctly */
        while(!ready) {
@@ -359,19 +360,20 @@ static int dvb_frontend_swzigzag_autotune(struct dvb_frontend *fe, int check_wra
                fepriv->auto_step, fepriv->auto_sub_step, fepriv->started_auto_step);
 
        /* set the frontend itself */
-       fepriv->parameters_in.frequency += fepriv->lnb_drift;
+       c->frequency += fepriv->lnb_drift;
        if (autoinversion)
-               fepriv->parameters_in.inversion = fepriv->inversion;
+               c->inversion = fepriv->inversion;
+       tmp = *c;
        if (fe->ops.set_frontend)
                fe_set_err = fe->ops.set_frontend(fe);
-       fepriv->parameters_out = fepriv->parameters_in;
+       *c = tmp;
        if (fe_set_err < 0) {
                fepriv->state = FESTATE_ERROR;
                return fe_set_err;
        }
 
-       fepriv->parameters_in.frequency = original_frequency;
-       fepriv->parameters_in.inversion = original_inversion;
+       c->frequency = original_frequency;
+       c->inversion = original_inversion;
 
        fepriv->auto_sub_step++;
        return 0;
@@ -382,6 +384,7 @@ static void dvb_frontend_swzigzag(struct dvb_frontend *fe)
        fe_status_t s = 0;
        int retval = 0;
        struct dvb_frontend_private *fepriv = fe->frontend_priv;
+       struct dtv_frontend_properties *c = &fe->dtv_property_cache, tmp;
 
        /* if we've got no parameters, just keep idling */
        if (fepriv->state & FESTATE_IDLE) {
@@ -393,9 +396,10 @@ static void dvb_frontend_swzigzag(struct dvb_frontend *fe)
        /* in SCAN mode, we just set the frontend when asked and leave it alone */
        if (fepriv->tune_mode_flags & FE_TUNE_MODE_ONESHOT) {
                if (fepriv->state & FESTATE_RETUNE) {
+                       tmp = *c;
                        if (fe->ops.set_frontend)
                                retval = fe->ops.set_frontend(fe);
-                       fepriv->parameters_out = fepriv->parameters_in;
+                       *c = tmp;
                        if (retval < 0)
                                fepriv->state = FESTATE_ERROR;
                        else
@@ -425,8 +429,8 @@ static void dvb_frontend_swzigzag(struct dvb_frontend *fe)
 
                /* if we're tuned, then we have determined the correct inversion */
                if ((!(fe->ops.info.caps & FE_CAN_INVERSION_AUTO)) &&
-                   (fepriv->parameters_in.inversion == INVERSION_AUTO)) {
-                       fepriv->parameters_in.inversion = fepriv->inversion;
+                   (c->inversion == INVERSION_AUTO)) {
+                       c->inversion = fepriv->inversion;
                }
                return;
        }
@@ -1976,14 +1980,14 @@ static int dvb_frontend_ioctl_legacy(struct file *file,
 
                /* force auto frequency inversion if requested */
                if (dvb_force_auto_inversion) {
-                       fepriv->parameters_in.inversion = INVERSION_AUTO;
+                       c->inversion = INVERSION_AUTO;
                }
                if (fe->ops.info.type == FE_OFDM) {
                        /* without hierarchical coding code_rate_LP is irrelevant,
                         * so we tolerate the otherwise invalid FEC_NONE setting */
-                       if (fepriv->parameters_in.u.ofdm.hierarchy_information == HIERARCHY_NONE &&
-                           fepriv->parameters_in.u.ofdm.code_rate_LP == FEC_NONE)
-                               fepriv->parameters_in.u.ofdm.code_rate_LP = FEC_AUTO;
+                       if (c->hierarchy == HIERARCHY_NONE &&
+                           c->code_rate_LP == FEC_NONE)
+                               c->code_rate_LP = FEC_AUTO;
                }
 
                /* get frontend-specific tuning settings */
@@ -1996,8 +2000,8 @@ static int dvb_frontend_ioctl_legacy(struct file *file,
                        switch(fe->ops.info.type) {
                        case FE_QPSK:
                                fepriv->min_delay = HZ/20;
-                               fepriv->step_size = fepriv->parameters_in.u.qpsk.symbol_rate / 16000;
-                               fepriv->max_drift = fepriv->parameters_in.u.qpsk.symbol_rate / 2000;
+                               fepriv->step_size = c->symbol_rate / 16000;
+                               fepriv->max_drift = c->symbol_rate / 2000;
                                break;
 
                        case FE_QAM: