mmc: dt: Add card-detection properties to core binding.

Signed-off-by: Chris Ball <cjb@laptop.org>

diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt
index 8a6811f4a02f5759e2a793506f1cef40b756e2d8..8e2e0ba2f486c57ca3505e44fa85effd369c4495 100644 (file)
--- a/Documentation/devicetree/bindings/mmc/mmc.txt
+++ b/Documentation/devicetree/bindings/mmc/mmc.txt
@@ -9,12 +9,17 @@ Interpreted by the OF core:
 Required properties:
 - bus-width: Number of data lines, can be <1>, <4>, or <8>
 
+Card detection:
+If no property below is supplied, standard SDHCI card detect is used.
+Only one of the properties in this section should be supplied:
+  - broken-cd: There is no card detection available; polling must be used.
+  - cd-gpios: Specify GPIOs for card detection, see gpio binding
+  - non-removable: non-removable slot (like eMMC); assume always present.
+
 Optional properties:
-- cd-gpios: Specify GPIOs for card detection, see gpio binding
 - wp-gpios: Specify GPIOs for write protection, see gpio binding
 - cd-inverted: when present, polarity on the cd gpio line is inverted
 - wp-inverted: when present, polarity on the wp gpio line is inverted
-- non-removable: non-removable slot (like eMMC)
 - max-frequency: maximum operating clock frequency
 
 Example: