Staging: rtl8187se: fix please, no space before tabs in r8185b_init.c

Fix checkpatch.pl issues with please, no space before
tabs in r8185b_init.c

Signed-off-by: Ebru Akagunduz <ebru.akagunduz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/rtl8187se/r8185b_init.c b/drivers/staging/rtl8187se/r8185b_init.c
index 3726172b6fea16c547705f7c5ff26c0d8b027670..a827b30ac6f46df376365bccdf8a92307691919d 100644 (file)
--- a/drivers/staging/rtl8187se/r8185b_init.c
+++ b/drivers/staging/rtl8187se/r8185b_init.c
@@ -487,13 +487,13 @@ static void ZEBRA_Config_85BASIC_HardCode(struct net_device *dev)
        /* For crystal calibration, added by Roger, 2007.12.11. */
        if (priv->bXtalCalibration) { /* reg 30.        */
         /*
-         *  enable crystal calibration.
-         *             RF Reg[30], (1)Xin:[12:9], Xout:[8:5],  addr[4:0].
-         *             (2)PA Pwr delay timer[15:14], default: 2.4us,
-         *             set BIT15=0
-         *             (3)RF signal on/off when calibration[13], default: on,
-         *             set BIT13=0.
-         *             So we should minus 4 BITs offset. 
+         *     enable crystal calibration.
+         *     RF Reg[30], (1)Xin:[12:9], Xout:[8:5],  addr[4:0].
+         *     (2)PA Pwr delay timer[15:14], default: 2.4us,
+         *     set BIT15=0
+         *     (3)RF signal on/off when calibration[13], default: on,
+         *     set BIT13=0.
+         *     So we should minus 4 BITs offset. 
          */
                RF_WriteReg(dev, 0x0f, (priv->XtalCal_Xin<<5) |
                            (priv->XtalCal_Xout<<1) | BIT11 | BIT9); mdelay(1);
@@ -953,10 +953,10 @@ static void ActSetWirelessMode8185(struct net_device *dev, u8 btWirelessMode)
        }
 
        /* 
-        * 2. Swtich band: RF or BB specific actions,
+        * 2. Swtich band: RF or BB specific actions,
         * for example, refresh tables in omc8255, or change initial gain if
-        *  necessary. Nothing to do for Zebra to switch band. Update current
-        *  wireless mode if we switch to specified band successfully.
+        * necessary. Nothing to do for Zebra to switch band. Update current
+        * wireless mode if we switch to specified band successfully.
         */
 
        ieee->mode = (WIRELESS_MODE)btWirelessMode;