ixgbe: Add semaphore access for PHY initialization for 82599
authorPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Tue, 19 May 2009 09:18:34 +0000 (09:18 +0000)
committerDavid S. Miller <davem@davemloft.net>
Tue, 19 May 2009 22:36:13 +0000 (15:36 -0700)
The SFP+ NIC (device id 0x10fb) needs a semaphore to serialize
PHY access, so our PHY init code must honor that same semaphore.

Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ixgbe/ixgbe_82599.c

index 39d7b64aced7bff18c6da94bf93af89189d34b2e..fef7397accda199a1b14a4e48a26271947f87ff4 100644 (file)
@@ -109,6 +109,13 @@ s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw)
                if (ret_val != 0)
                        goto setup_sfp_out;
 
+               /* PHY config will finish before releasing the semaphore */
+               ret_val = ixgbe_acquire_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);
+               if (ret_val != 0) {
+                       ret_val = IXGBE_ERR_SWFW_SYNC;
+                       goto setup_sfp_out;
+               }
+
                hw->eeprom.ops.read(hw, ++data_offset, &data_value);
                while (data_value != 0xffff) {
                        IXGBE_WRITE_REG(hw, IXGBE_CORECTL, data_value);
@@ -119,6 +126,11 @@ s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw)
                IXGBE_WRITE_REG(hw, IXGBE_CORECTL, 0x00000102);
                IXGBE_WRITE_REG(hw, IXGBE_CORECTL, 0x00000b1d);
                IXGBE_WRITE_FLUSH(hw);
+
+               /* Release the semaphore */
+               ixgbe_release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);
+               /* Delay obtaining semaphore again to allow FW access */
+               msleep(hw->eeprom.semaphore_delay);
        }
 
 setup_sfp_out: