* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
*
- * Maintained by: Alok N Kataria <akataria@vmware.com>
+ * Maintained by: Arvind Kumar <arvindkumar@vmware.com>
*
*/
return 0;
}
+/*
+ * Query the device, fetch the config info and return the
+ * maximum number of targets on the adapter. In case of
+ * failure due to any reason return default i.e. 16.
+ */
+static u32 pvscsi_get_max_targets(struct pvscsi_adapter *adapter)
+{
+ struct PVSCSICmdDescConfigCmd cmd;
+ struct PVSCSIConfigPageHeader *header;
+ struct device *dev;
+ dma_addr_t configPagePA;
+ void *config_page;
+ u32 numPhys = 16;
+
+ dev = pvscsi_dev(adapter);
+ config_page = pci_alloc_consistent(adapter->dev, PAGE_SIZE,
+ &configPagePA);
+ if (!config_page) {
+ dev_warn(dev, "vmw_pvscsi: failed to allocate memory for config page\n");
+ goto exit;
+ }
+ BUG_ON(configPagePA & ~PAGE_MASK);
+
+ /* Fetch config info from the device. */
+ cmd.configPageAddress = ((u64)PVSCSI_CONFIG_CONTROLLER_ADDRESS) << 32;
+ cmd.configPageNum = PVSCSI_CONFIG_PAGE_CONTROLLER;
+ cmd.cmpAddr = configPagePA;
+ cmd._pad = 0;
+
+ /*
+ * Mark the completion page header with error values. If the device
+ * completes the command successfully, it sets the status values to
+ * indicate success.
+ */
+ header = config_page;
+ memset(header, 0, sizeof *header);
+ header->hostStatus = BTSTAT_INVPARAM;
+ header->scsiStatus = SDSTAT_CHECK;
+
+ pvscsi_write_cmd_desc(adapter, PVSCSI_CMD_CONFIG, &cmd, sizeof cmd);
+
+ if (header->hostStatus == BTSTAT_SUCCESS &&
+ header->scsiStatus == SDSTAT_GOOD) {
+ struct PVSCSIConfigPageController *config;
+
+ config = config_page;
+ numPhys = config->numPhys;
+ } else
+ dev_warn(dev, "vmw_pvscsi: PVSCSI_CMD_CONFIG failed. hostStatus = 0x%x, scsiStatus = 0x%x\n",
+ header->hostStatus, header->scsiStatus);
+ pci_free_consistent(adapter->dev, PAGE_SIZE, config_page, configPagePA);
+exit:
+ return numPhys;
+}
+
static int __devinit pvscsi_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
struct pvscsi_adapter *adapter;
struct Scsi_Host *host;
+ struct device *dev;
unsigned int i;
unsigned long flags = 0;
int error;
goto out_release_resources;
}
+ /*
+ * Ask the device for max number of targets.
+ */
+ host->max_id = pvscsi_get_max_targets(adapter);
+ dev = pvscsi_dev(adapter);
+ dev_info(dev, "vmw_pvscsi: host->max_id: %u\n", host->max_id);
+
/*
* From this point on we should reset the adapter if anything goes
* wrong.
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
*
- * Maintained by: Alok N Kataria <akataria@vmware.com>
+ * Maintained by: Arvind Kumar <arvindkumar@vmware.com>
*
*/
#include <linux/types.h>
-#define PVSCSI_DRIVER_VERSION_STRING "1.0.1.0-k"
+#define PVSCSI_DRIVER_VERSION_STRING "1.0.2.0-k"
#define PVSCSI_MAX_NUM_SG_ENTRIES_PER_SEGMENT 128
* host adapter status/error codes
*/
enum HostBusAdapterStatus {
- BTSTAT_SUCCESS = 0x00, /* CCB complete normally with no errors */
- BTSTAT_LINKED_COMMAND_COMPLETED = 0x0a,
- BTSTAT_LINKED_COMMAND_COMPLETED_WITH_FLAG = 0x0b,
- BTSTAT_DATA_UNDERRUN = 0x0c,
- BTSTAT_SELTIMEO = 0x11, /* SCSI selection timeout */
- BTSTAT_DATARUN = 0x12, /* data overrun/underrun */
- BTSTAT_BUSFREE = 0x13, /* unexpected bus free */
- BTSTAT_INVPHASE = 0x14, /* invalid bus phase or sequence requested by target */
- BTSTAT_LUNMISMATCH = 0x17, /* linked CCB has different LUN from first CCB */
- BTSTAT_SENSFAILED = 0x1b, /* auto request sense failed */
- BTSTAT_TAGREJECT = 0x1c, /* SCSI II tagged queueing message rejected by target */
- BTSTAT_BADMSG = 0x1d, /* unsupported message received by the host adapter */
- BTSTAT_HAHARDWARE = 0x20, /* host adapter hardware failed */
- BTSTAT_NORESPONSE = 0x21, /* target did not respond to SCSI ATN, sent a SCSI RST */
- BTSTAT_SENTRST = 0x22, /* host adapter asserted a SCSI RST */
- BTSTAT_RECVRST = 0x23, /* other SCSI devices asserted a SCSI RST */
- BTSTAT_DISCONNECT = 0x24, /* target device reconnected improperly (w/o tag) */
- BTSTAT_BUSRESET = 0x25, /* host adapter issued BUS device reset */
- BTSTAT_ABORTQUEUE = 0x26, /* abort queue generated */
- BTSTAT_HASOFTWARE = 0x27, /* host adapter software error */
- BTSTAT_HATIMEOUT = 0x30, /* host adapter hardware timeout error */
- BTSTAT_SCSIPARITY = 0x34, /* SCSI parity error detected */
+ BTSTAT_SUCCESS = 0x00, /* CCB complete normally with no errors */
+ BTSTAT_LINKED_COMMAND_COMPLETED = 0x0a,
+ BTSTAT_LINKED_COMMAND_COMPLETED_WITH_FLAG = 0x0b,
+ BTSTAT_DATA_UNDERRUN = 0x0c,
+ BTSTAT_SELTIMEO = 0x11, /* SCSI selection timeout */
+ BTSTAT_DATARUN = 0x12, /* data overrun/underrun */
+ BTSTAT_BUSFREE = 0x13, /* unexpected bus free */
+ BTSTAT_INVPHASE = 0x14, /* invalid bus phase or sequence
+ * requested by target */
+ BTSTAT_LUNMISMATCH = 0x17, /* linked CCB has different LUN from
+ * first CCB */
+ BTSTAT_INVPARAM = 0x1a, /* invalid parameter in CCB or segment
+ * list */
+ BTSTAT_SENSFAILED = 0x1b, /* auto request sense failed */
+ BTSTAT_TAGREJECT = 0x1c, /* SCSI II tagged queueing message
+ * rejected by target */
+ BTSTAT_BADMSG = 0x1d, /* unsupported message received by the
+ * host adapter */
+ BTSTAT_HAHARDWARE = 0x20, /* host adapter hardware failed */
+ BTSTAT_NORESPONSE = 0x21, /* target did not respond to SCSI ATN,
+ * sent a SCSI RST */
+ BTSTAT_SENTRST = 0x22, /* host adapter asserted a SCSI RST */
+ BTSTAT_RECVRST = 0x23, /* other SCSI devices asserted a SCSI
+ * RST */
+ BTSTAT_DISCONNECT = 0x24, /* target device reconnected improperly
+ * (w/o tag) */
+ BTSTAT_BUSRESET = 0x25, /* host adapter issued BUS device reset */
+ BTSTAT_ABORTQUEUE = 0x26, /* abort queue generated */
+ BTSTAT_HASOFTWARE = 0x27, /* host adapter software error */
+ BTSTAT_HATIMEOUT = 0x30, /* host adapter hardware timeout error */
+ BTSTAT_SCSIPARITY = 0x34, /* SCSI parity error detected */
+};
+
+/*
+ * SCSI device status values.
+ */
+enum ScsiDeviceStatus {
+ SDSTAT_GOOD = 0x00, /* No errors. */
+ SDSTAT_CHECK = 0x02, /* Check condition. */
};
/*
u8 lun[8];
} __packed;
+/*
+ * Command descriptor for PVSCSI_CMD_CONFIG --
+ */
+
+struct PVSCSICmdDescConfigCmd {
+ u64 cmpAddr;
+ u64 configPageAddress;
+ u32 configPageNum;
+ u32 _pad;
+} __packed;
+
+enum PVSCSIConfigPageType {
+ PVSCSI_CONFIG_PAGE_CONTROLLER = 0x1958,
+ PVSCSI_CONFIG_PAGE_PHY = 0x1959,
+ PVSCSI_CONFIG_PAGE_DEVICE = 0x195a,
+};
+
+enum PVSCSIConfigPageAddressType {
+ PVSCSI_CONFIG_CONTROLLER_ADDRESS = 0x2120,
+ PVSCSI_CONFIG_BUSTARGET_ADDRESS = 0x2121,
+ PVSCSI_CONFIG_PHY_ADDRESS = 0x2122,
+};
+
/*
* Command descriptor for PVSCSI_CMD_ABORT_CMD --
*
u32 _pad[2];
} __packed;
+struct PVSCSIConfigPageHeader {
+ u32 pageNum;
+ u16 numDwords;
+ u16 hostStatus;
+ u16 scsiStatus;
+ u16 reserved[3];
+} __packed;
+
+struct PVSCSIConfigPageController {
+ struct PVSCSIConfigPageHeader header;
+ u64 nodeWWN; /* Device name as defined in the SAS spec. */
+ u16 manufacturer[64];
+ u16 serialNumber[64];
+ u16 opromVersion[32];
+ u16 hwVersion[32];
+ u16 firmwareVersion[32];
+ u32 numPhys;
+ u8 useConsecutivePhyWWNs;
+ u8 reserved[3];
+} __packed;
+
/*
* Interrupt status / IRQ bits.
*/
projects / GitHub / MotorolaMobilityLLC / kernel-slsi.git / commitdiff