arm64: dts: sm1_s905y3_odroidc4: Apply changes for odroidc4

Change-Id: I2ee6b8645002d98631496587055dcaece9d9ca8d

diff --git a/arch/arm64/boot/dts/amlogic/sm1_s905y3_odroidc4.dts b/arch/arm64/boot/dts/amlogic/sm1_s905y3_odroidc4.dts
index bcea3b885f0c070da9f2bfcc77d4af6d8cf9b777..b8b527f101d5fa02173e8cd0ce46319b5f0cc0f1 100644 (file)
--- a/arch/arm64/boot/dts/amlogic/sm1_s905y3_odroidc4.dts
+++ b/arch/arm64/boot/dts/amlogic/sm1_s905y3_odroidc4.dts
@@ -35,18 +35,20 @@
                serial2 = &uart_B;
                serial3 = &uart_C;
                serial4 = &uart_AO_B;
+               i2c0 = &i2c2;
+               i2c1 = &i2c3;
+               i2c2 = &i2c0;
+               i2c3 = &i2c1;
+               i2c4 = &i2c_AO;
                tsensor0 = &p_tsensor;
                tsensor1 = &d_tsensor;
-               i2c0 = &i2c0;
-               i2c1 = &i2c1;
-               i2c2 = &i2c2;
-               i2c3 = &i2c3;
-               i2c4 = &i2c_AO;
+               spi0 = &spicc0;
+               spi1 = &spicc1;
        };
 
        memory@00000000 {
                device_type = "memory";
-               linux,usable-memory = <0x0 0x000000 0x0 0x80000000>;
+               linux,usable-memory = <0x0 0x000000 0x0 0xf0000000>;
        };
 
        reserved-memory {
@@ -241,7 +243,7 @@
        bt-dev{
                compatible = "amlogic, bt-dev";
                dev_name = "bt-dev";
-               status = "okay";
+               status = "disabled";
                gpio_reset = <&gpio       GPIOX_17       GPIO_ACTIVE_HIGH>;
                gpio_hostwake = <&gpio       GPIOX_19       GPIO_ACTIVE_HIGH>;
        };
@@ -249,7 +251,7 @@
        wifi{
                compatible = "amlogic, aml_wifi";
                dev_name = "aml_wifi";
-               status = "okay";
+               status = "disabled";
                interrupt_pin = <&gpio       GPIOX_7       GPIO_ACTIVE_HIGH>;
                irq_trigger_type = "GPIO_IRQ_LOW";
                power_on_pin = <&gpio       GPIOX_6       GPIO_ACTIVE_HIGH>;
@@ -636,30 +638,12 @@
        };//End unifykey
 
        efusekey:efusekey{
-               keynum = <4>;
+               keynum = <1>;
                key0 = <&key_0>;
-               key1 = <&key_1>;
-               key2 = <&key_2>;
-               key3 = <&key_3>;
                key_0:key_0{
-                       keyname = "mac";
+                       keyname = "uuid";
                        offset = <0>;
-                       size = <6>;
-               };
-               key_1:key_1{
-                       keyname = "mac_bt";
-                       offset = <6>;
-                       size = <6>;
-               };
-               key_2:key_2{
-                       keyname = "mac_wifi";
-                       offset = <12>;
-                       size = <6>;
-               };
-               key_3:key_3{
-                       keyname = "usid";
-                       offset = <18>;
-                       size = <16>;
+                       size = <32>;
                };
        };//End efusekey
 
@@ -968,6 +952,77 @@
 
 }; /* end of / */
 
+&custom_maps{
+       mapnum = <1>;
+       map0 = <&map_0>;
+       map_0: map_0{
+               mapname = "amlogic-remote-1";
+               customcode = <0xf708>;
+               release_delay = <80>;
+               size  = <60>;   /*keymap size*/
+               keymap = <REMOTE_KEY(0x10, KEY_0)
+                       REMOTE_KEY(0x11, KEY_1)
+                       REMOTE_KEY(0x12, KEY_2)
+                       REMOTE_KEY(0x13, KEY_3)
+                       REMOTE_KEY(0x14, KEY_4)
+                       REMOTE_KEY(0x15, KEY_5)
+                       REMOTE_KEY(0x16, KEY_6)
+                       REMOTE_KEY(0x17, KEY_7)
+                       REMOTE_KEY(0x18, KEY_8)
+                       REMOTE_KEY(0x19, KEY_9)
+                       REMOTE_KEY(0x1f, KEY_REPLY) /*KEY_ENTER*/
+                       REMOTE_KEY(0x20, KEY_F3)
+                       REMOTE_KEY(0x50, KEY_F4)
+                       REMOTE_KEY(0x40, KEY_F5)
+                       REMOTE_KEY(0x4d, KEY_F6)
+                       REMOTE_KEY(0x96, KEY_F7)
+                       REMOTE_KEY(0x29, KEY_F8)
+                       REMOTE_KEY(0x77, KEY_F9)
+                       REMOTE_KEY(0x78, KEY_F10)
+                       REMOTE_KEY(0X88, KEY_F11)
+                       REMOTE_KEY(0x30, KEY_BACKSPACE)
+                       REMOTE_KEY(0x06, KEY_PROPS)
+                       REMOTE_KEY(0x28, KEY_UNDO)
+                       REMOTE_KEY(0x00, KEY_UP)
+                       REMOTE_KEY(0x01, KEY_DOWN)
+                       REMOTE_KEY(0x03, KEY_LEFT)
+                       REMOTE_KEY(0x02, KEY_RIGHT)
+                       REMOTE_KEY(0x53, KEY_LEFTMETA)
+                       REMOTE_KEY(0x51, KEY_PAGEUP)
+                       REMOTE_KEY(0x52, KEY_PAGEDOWN)
+                       REMOTE_KEY(0x07, KEY_PAUSE)
+                       REMOTE_KEY(0x98, KEY_HANGEUL)
+                       REMOTE_KEY(0x59, KEY_HANJA)
+                       REMOTE_KEY(0x1b, KEY_SCALE)
+                       REMOTE_KEY(0x04, KEY_KPCOMMA)
+                       REMOTE_KEY(0x0A, KEY_POWER)
+                       REMOTE_KEY(0x81, KEY_TAB)
+                       REMOTE_KEY(0x0D, KEY_MUTE)
+                       REMOTE_KEY(0x0c, KEY_HOMEPAGE)
+                       REMOTE_KEY(0x1e, KEY_FRONT)
+                       REMOTE_KEY(0x80, KEY_COPY)
+                       REMOTE_KEY(0x95, KEY_OPEN)
+                       REMOTE_KEY(0x54, KEY_PASTE)
+                       REMOTE_KEY(0x79, KEY_FIND)
+                       REMOTE_KEY(0x4f, KEY_A)
+                       REMOTE_KEY(0x97, KEY_B)
+                       REMOTE_KEY(0x92, KEY_C)
+                       REMOTE_KEY(0x4c, KEY_D)
+                       REMOTE_KEY(0x93, KEY_CUT)
+                       REMOTE_KEY(0x1c, KEY_BACK)
+                       REMOTE_KEY(0x58, KEY_VOLUMEUP)
+                       REMOTE_KEY(0x5d, KEY_VOLUMEDOWN)
+                       REMOTE_KEY(0x05, KEY_RED)
+                       REMOTE_KEY(0x09, KEY_GREEN)
+                       REMOTE_KEY(0x42, KEY_YELLOW)
+                       REMOTE_KEY(0x43, KEY_BLUE)
+                       REMOTE_KEY(0x1a, KEY_MENU)
+                       REMOTE_KEY(0x44, KEY_REWIND)
+                       REMOTE_KEY(0x45, KEY_FASTFORWARD)
+                       REMOTE_KEY(0x55, KEY_CALC)>;
+       };
+};
+
 &vddcpu0 {
        pwms = <&pwm_AO_cd MESON_PWM_1 1250 0>;
        regulator-min-microvolt = <720000>;
@@ -1020,62 +1075,12 @@
                status = "okay";
 };
 
-&i2c0 {
-       status = "okay";
-       pinctrl-names="default";
-       pinctrl-0=<&i2c0_master_pins2>;
-       clock-frequency = <400000>;
-
-       gt9xx@5d {
-               compatible = "goodix,gt9xx";
-               status = "disabled";
-               reg = <0x5d>;
-               reset-gpio = <&gpio GPIOZ_9 0x00>;
-               irq-gpio = <&gpio GPIOZ_3 0x00>;
-       };
-
-       ftxx@38 {
-               compatible = "focaltech,fts";
-               status = "disabled";
-               reg = <0x38>;
-               reset-gpio = <&gpio GPIOZ_9 0x00>;
-               irq-gpio = <&gpio GPIOZ_3 0x00>;
-               x_max = <600>;
-               y_max = <1024>;
-               max-touch-number = <10>;
-       };
+&i2c2 {
+       status = "disabled";
 };
 
-/*&i2c2 {
- *     status = "okay";
- *     pinctrl-names="default";
- *     pinctrl-0=<&i2c2_master_pins2>;
- *     clock-frequency = <300000>;
- *};
- */
-
 &i2c3 {
-       status = "ok";
-       pinctrl-names="default";
-       pinctrl-0=<&i2c3_master_pins2>;
-       clock-frequency = <300000>; /* default 100k */
-
-       /* for ref board */
-       ad82584f_62: ad82584f_62@62 {
-               compatible = "ESMT, ad82584f";
-               #sound-dai-cells = <0>;
-               reg = <0x31>;
-               status = "disabled";
-               reset_pin = <&gpio GPIOA_5 0>;
-               no_mclk;
-       };
-
-       bl_extern_i2c {
-               compatible = "bl_extern, i2c";
-               dev_name = "lp8556";
-               reg = <0x2c>;
-               status = "disabled";
-       };
+       status = "disabled";
 };
 
 &audiobus {
@@ -1523,12 +1528,12 @@
        };
 
        pdmin: pdmin {
-               mux { /* GPIOZ_2, GPIOZ_3, GPIOZ_4, GPIOZ_5, GPIOZ_6 */
-                       groups = "pdm_din0_z",
-                               "pdm_din1_z",
-                               "pdm_din2_z",
-                               "pdm_din3_z",
-                               "pdm_dclk_z";
+               mux { /* gpioa_5, gpioa_6, gpioa_7, gpioa_8, gpioa_9*/
+                       groups = "pdm_din0_a",
+                       "pdm_din1_a",
+                       "pdm_din2_a",
+                       "pdm_din3_a",
+                       "pdm_dclk_a";
                        function = "pdm";
                };
        };
@@ -1607,25 +1612,30 @@
 &usb3_phy_v2 {
        status = "okay";
        portnum = <1>;
-       otg = <0>;
+       otg = <1>;
+       gpio-vbus-power = "GPIOAO_2";
+       gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
 };
 
 &dwc2_a {
        status = "okay";
        /** 0: normal, 1: otg+dwc3 host only, 2: otg+dwc3 device only*/
-       controller-type = <1>;
+       controller-type = <3>;
 };
 &ethmac {
        status = "okay";
-       pinctrl-names = "internal_eth_pins";
-       pinctrl-0 = <&internal_eth_pins>;
-       mc_val = <0x4be04>;
+       pinctrl-names = "external_eth_pins";
+       pinctrl-0 = <&external_eth_pins>;
+       mc_val = <0x1621>;
 
-       internal_phy=<1>;
+       internal_phy=<0>;
+
+       /* reset */
+       rst_pin-gpios = <&gpio GPIOZ_15 GPIO_ACTIVE_LOW>;
 };
 
 &uart_A {
-       status = "okay";
+       status = "disabled";
 };
 
 /*if you want to use vdin just modify status to "ok"*/
@@ -1799,9 +1809,9 @@
 };
 
 &irblaster {
-       status = "okay";
+       status = "disabled";
 };
 
 &dummy_venc {
        status = "okay";
-};
\ No newline at end of file
+};