ARM: shmobile: gose: Configure PFC in DT

Configure PFC for the already enabled scif and ethernet devices
in the device tree for the gose board.

Based on similar work for the koelsch board by Laurent Pinchart and
Sergei Shtylyov.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
index 96443ec5f6abdd8f4e52e92dfe323514dc1a113b..1575ef759047170b86ffe65e759c089bb25e0f6e 100644 (file)
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -37,7 +37,32 @@
        clock-frequency = <20000000>;
 };
 
+&pfc {
+       scif0_pins: serial0 {
+               renesas,groups = "scif0_data_d";
+               renesas,function = "scif0";
+       };
+
+       scif1_pins: serial1 {
+               renesas,groups = "scif1_data_d";
+               renesas,function = "scif1";
+       };
+
+       ether_pins: ether {
+               renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
+               renesas,function = "eth";
+       };
+
+       phy1_pins: phy1 {
+               renesas,groups = "intc_irq0";
+               renesas,function = "intc";
+       };
+};
+
 &ether {
+       pinctrl-0 = <&ether_pins &phy1_pins>;
+       pinctrl-names = "default";
+
        phy-handle = <&phy1>;
        renesas,ether-link-active-low;
        status = "okay";
@@ -55,9 +80,15 @@
 };
 
 &scif0 {
+       pinctrl-0 = <&scif0_pins>;
+       pinctrl-names = "default";
+
        status = "okay";
 };
 
 &scif1 {
+       pinctrl-0 = <&scif1_pins>;
+       pinctrl-names = "default";
+
        status = "okay";
 };