*
**/
static void i40e_get_settings_link_up(struct i40e_hw *hw,
- struct ethtool_cmd *ecmd,
+ struct ethtool_link_ksettings *cmd,
struct net_device *netdev,
struct i40e_pf *pf)
{
u32 link_speed = hw_link_info->link_speed;
u32 e_advertising = 0x0;
u32 e_supported = 0x0;
+ u32 supported, advertising;
+
+ ethtool_convert_link_mode_to_legacy_u32(&supported,
+ cmd->link_modes.supported);
+ ethtool_convert_link_mode_to_legacy_u32(&advertising,
+ cmd->link_modes.advertising);
/* Initialize supported and advertised settings based on phy settings */
switch (hw_link_info->phy_type) {
case I40E_PHY_TYPE_40GBASE_CR4:
case I40E_PHY_TYPE_40GBASE_CR4_CU:
- ecmd->supported = SUPPORTED_Autoneg |
- SUPPORTED_40000baseCR4_Full;
- ecmd->advertising = ADVERTISED_Autoneg |
- ADVERTISED_40000baseCR4_Full;
+ supported = SUPPORTED_Autoneg |
+ SUPPORTED_40000baseCR4_Full;
+ advertising = ADVERTISED_Autoneg |
+ ADVERTISED_40000baseCR4_Full;
break;
case I40E_PHY_TYPE_XLAUI:
case I40E_PHY_TYPE_XLPPI:
case I40E_PHY_TYPE_40GBASE_AOC:
- ecmd->supported = SUPPORTED_40000baseCR4_Full;
+ supported = SUPPORTED_40000baseCR4_Full;
break;
case I40E_PHY_TYPE_40GBASE_SR4:
- ecmd->supported = SUPPORTED_40000baseSR4_Full;
+ supported = SUPPORTED_40000baseSR4_Full;
break;
case I40E_PHY_TYPE_40GBASE_LR4:
- ecmd->supported = SUPPORTED_40000baseLR4_Full;
+ supported = SUPPORTED_40000baseLR4_Full;
break;
case I40E_PHY_TYPE_10GBASE_SR:
case I40E_PHY_TYPE_10GBASE_LR:
case I40E_PHY_TYPE_1000BASE_SX:
case I40E_PHY_TYPE_1000BASE_LX:
- ecmd->supported = SUPPORTED_10000baseT_Full;
+ supported = SUPPORTED_10000baseT_Full;
if (hw_link_info->module_type[2] &
I40E_MODULE_TYPE_1000BASE_SX ||
hw_link_info->module_type[2] &
I40E_MODULE_TYPE_1000BASE_LX) {
- ecmd->supported |= SUPPORTED_1000baseT_Full;
+ supported |= SUPPORTED_1000baseT_Full;
if (hw_link_info->requested_speeds &
I40E_LINK_SPEED_1GB)
- ecmd->advertising |= ADVERTISED_1000baseT_Full;
+ advertising |= ADVERTISED_1000baseT_Full;
}
if (hw_link_info->requested_speeds & I40E_LINK_SPEED_10GB)
- ecmd->advertising |= ADVERTISED_10000baseT_Full;
+ advertising |= ADVERTISED_10000baseT_Full;
break;
case I40E_PHY_TYPE_10GBASE_T:
case I40E_PHY_TYPE_1000BASE_T:
case I40E_PHY_TYPE_100BASE_TX:
- ecmd->supported = SUPPORTED_Autoneg |
- SUPPORTED_10000baseT_Full |
- SUPPORTED_1000baseT_Full |
- SUPPORTED_100baseT_Full;
- ecmd->advertising = ADVERTISED_Autoneg;
+ supported = SUPPORTED_Autoneg |
+ SUPPORTED_10000baseT_Full |
+ SUPPORTED_1000baseT_Full |
+ SUPPORTED_100baseT_Full;
+ advertising = ADVERTISED_Autoneg;
if (hw_link_info->requested_speeds & I40E_LINK_SPEED_10GB)
- ecmd->advertising |= ADVERTISED_10000baseT_Full;
+ advertising |= ADVERTISED_10000baseT_Full;
if (hw_link_info->requested_speeds & I40E_LINK_SPEED_1GB)
- ecmd->advertising |= ADVERTISED_1000baseT_Full;
+ advertising |= ADVERTISED_1000baseT_Full;
if (hw_link_info->requested_speeds & I40E_LINK_SPEED_100MB)
- ecmd->advertising |= ADVERTISED_100baseT_Full;
+ advertising |= ADVERTISED_100baseT_Full;
break;
case I40E_PHY_TYPE_1000BASE_T_OPTICAL:
- ecmd->supported = SUPPORTED_Autoneg |
- SUPPORTED_1000baseT_Full;
- ecmd->advertising = ADVERTISED_Autoneg |
- ADVERTISED_1000baseT_Full;
+ supported = SUPPORTED_Autoneg |
+ SUPPORTED_1000baseT_Full;
+ advertising = ADVERTISED_Autoneg |
+ ADVERTISED_1000baseT_Full;
break;
case I40E_PHY_TYPE_10GBASE_CR1_CU:
case I40E_PHY_TYPE_10GBASE_CR1:
- ecmd->supported = SUPPORTED_Autoneg |
- SUPPORTED_10000baseT_Full;
- ecmd->advertising = ADVERTISED_Autoneg |
- ADVERTISED_10000baseT_Full;
+ supported = SUPPORTED_Autoneg |
+ SUPPORTED_10000baseT_Full;
+ advertising = ADVERTISED_Autoneg |
+ ADVERTISED_10000baseT_Full;
break;
case I40E_PHY_TYPE_XAUI:
case I40E_PHY_TYPE_XFI:
case I40E_PHY_TYPE_SFI:
case I40E_PHY_TYPE_10GBASE_SFPP_CU:
case I40E_PHY_TYPE_10GBASE_AOC:
- ecmd->supported = SUPPORTED_10000baseT_Full;
- ecmd->advertising = SUPPORTED_10000baseT_Full;
+ supported = SUPPORTED_10000baseT_Full;
+ advertising = SUPPORTED_10000baseT_Full;
break;
case I40E_PHY_TYPE_SGMII:
- ecmd->supported = SUPPORTED_Autoneg |
- SUPPORTED_1000baseT_Full;
+ supported = SUPPORTED_Autoneg |
+ SUPPORTED_1000baseT_Full;
if (hw_link_info->requested_speeds & I40E_LINK_SPEED_1GB)
- ecmd->advertising |= ADVERTISED_1000baseT_Full;
+ advertising |= ADVERTISED_1000baseT_Full;
if (pf->flags & I40E_FLAG_100M_SGMII_CAPABLE) {
- ecmd->supported |= SUPPORTED_100baseT_Full;
+ supported |= SUPPORTED_100baseT_Full;
if (hw_link_info->requested_speeds &
I40E_LINK_SPEED_100MB)
- ecmd->advertising |= ADVERTISED_100baseT_Full;
+ advertising |= ADVERTISED_100baseT_Full;
}
break;
case I40E_PHY_TYPE_40GBASE_KR4:
case I40E_PHY_TYPE_10GBASE_KR:
case I40E_PHY_TYPE_10GBASE_KX4:
case I40E_PHY_TYPE_1000BASE_KX:
- ecmd->supported |= SUPPORTED_40000baseKR4_Full |
- SUPPORTED_20000baseKR2_Full |
- SUPPORTED_10000baseKR_Full |
- SUPPORTED_10000baseKX4_Full |
- SUPPORTED_1000baseKX_Full |
- SUPPORTED_Autoneg;
- ecmd->advertising |= ADVERTISED_40000baseKR4_Full |
- ADVERTISED_20000baseKR2_Full |
- ADVERTISED_10000baseKR_Full |
- ADVERTISED_10000baseKX4_Full |
- ADVERTISED_1000baseKX_Full |
- ADVERTISED_Autoneg;
+ supported |= SUPPORTED_40000baseKR4_Full |
+ SUPPORTED_20000baseKR2_Full |
+ SUPPORTED_10000baseKR_Full |
+ SUPPORTED_10000baseKX4_Full |
+ SUPPORTED_1000baseKX_Full |
+ SUPPORTED_Autoneg;
+ advertising |= ADVERTISED_40000baseKR4_Full |
+ ADVERTISED_20000baseKR2_Full |
+ ADVERTISED_10000baseKR_Full |
+ ADVERTISED_10000baseKX4_Full |
+ ADVERTISED_1000baseKX_Full |
+ ADVERTISED_Autoneg;
break;
case I40E_PHY_TYPE_25GBASE_KR:
case I40E_PHY_TYPE_25GBASE_CR:
case I40E_PHY_TYPE_25GBASE_SR:
case I40E_PHY_TYPE_25GBASE_LR:
- ecmd->supported = SUPPORTED_Autoneg;
- ecmd->advertising = ADVERTISED_Autoneg;
+ supported = SUPPORTED_Autoneg;
+ advertising = ADVERTISED_Autoneg;
/* TODO: add speeds when ethtool is ready to support*/
break;
default:
i40e_phy_type_to_ethtool(pf, &e_supported,
&e_advertising);
- ecmd->supported = ecmd->supported & e_supported;
- ecmd->advertising = ecmd->advertising & e_advertising;
+ supported = supported & e_supported;
+ advertising = advertising & e_advertising;
/* Set speed and duplex */
switch (link_speed) {
case I40E_LINK_SPEED_40GB:
- ethtool_cmd_speed_set(ecmd, SPEED_40000);
+ cmd->base.speed = SPEED_40000;
break;
case I40E_LINK_SPEED_25GB:
#ifdef SPEED_25000
- ethtool_cmd_speed_set(ecmd, SPEED_25000);
+ cmd->base.speed = SPEED_25000;
#else
netdev_info(netdev,
"Speed is 25G, display not supported by this version of ethtool.\n");
#endif
break;
case I40E_LINK_SPEED_20GB:
- ethtool_cmd_speed_set(ecmd, SPEED_20000);
+ cmd->base.speed = SPEED_20000;
break;
case I40E_LINK_SPEED_10GB:
- ethtool_cmd_speed_set(ecmd, SPEED_10000);
+ cmd->base.speed = SPEED_10000;
break;
case I40E_LINK_SPEED_1GB:
- ethtool_cmd_speed_set(ecmd, SPEED_1000);
+ cmd->base.speed = SPEED_1000;
break;
case I40E_LINK_SPEED_100MB:
- ethtool_cmd_speed_set(ecmd, SPEED_100);
+ cmd->base.speed = SPEED_100;
break;
default:
break;
}
- ecmd->duplex = DUPLEX_FULL;
+ cmd->base.duplex = DUPLEX_FULL;
+
+ ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
+ supported);
+ ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising,
+ advertising);
}
/**
* Reports link settings that can be determined when link is down
**/
static void i40e_get_settings_link_down(struct i40e_hw *hw,
- struct ethtool_cmd *ecmd,
+ struct ethtool_link_ksettings *cmd,
struct i40e_pf *pf)
{
+ u32 supported, advertising;
+
/* link is down and the driver needs to fall back on
* supported phy types to figure out what info to display
*/
- i40e_phy_type_to_ethtool(pf, &ecmd->supported,
- &ecmd->advertising);
+ i40e_phy_type_to_ethtool(pf, &supported, &advertising);
+
+ ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
+ supported);
+ ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising,
+ advertising);
/* With no link speed and duplex are unknown */
- ethtool_cmd_speed_set(ecmd, SPEED_UNKNOWN);
- ecmd->duplex = DUPLEX_UNKNOWN;
+ cmd->base.speed = SPEED_UNKNOWN;
+ cmd->base.duplex = DUPLEX_UNKNOWN;
}
/**
*
* Reports speed/duplex settings based on media_type
**/
-static int i40e_get_settings(struct net_device *netdev,
- struct ethtool_cmd *ecmd)
+static int i40e_get_link_ksettings(struct net_device *netdev,
+ struct ethtool_link_ksettings *cmd)
{
struct i40e_netdev_priv *np = netdev_priv(netdev);
struct i40e_pf *pf = np->vsi->back;
struct i40e_hw *hw = &pf->hw;
struct i40e_link_status *hw_link_info = &hw->phy.link_info;
bool link_up = hw_link_info->link_info & I40E_AQ_LINK_UP;
+ u32 advertising;
if (link_up)
- i40e_get_settings_link_up(hw, ecmd, netdev, pf);
+ i40e_get_settings_link_up(hw, cmd, netdev, pf);
else
- i40e_get_settings_link_down(hw, ecmd, pf);
+ i40e_get_settings_link_down(hw, cmd, pf);
/* Now set the settings that don't rely on link being up/down */
/* Set autoneg settings */
- ecmd->autoneg = ((hw_link_info->an_info & I40E_AQ_AN_COMPLETED) ?
+ cmd->base.autoneg = ((hw_link_info->an_info & I40E_AQ_AN_COMPLETED) ?
AUTONEG_ENABLE : AUTONEG_DISABLE);
switch (hw->phy.media_type) {
case I40E_MEDIA_TYPE_BACKPLANE:
- ecmd->supported |= SUPPORTED_Autoneg |
- SUPPORTED_Backplane;
- ecmd->advertising |= ADVERTISED_Autoneg |
- ADVERTISED_Backplane;
- ecmd->port = PORT_NONE;
+ ethtool_link_ksettings_add_link_mode(cmd, supported,
+ Autoneg);
+ ethtool_link_ksettings_add_link_mode(cmd, supported,
+ Backplane);
+ ethtool_link_ksettings_add_link_mode(cmd, advertising,
+ Autoneg);
+ ethtool_link_ksettings_add_link_mode(cmd, advertising,
+ Backplane);
+ cmd->base.port = PORT_NONE;
break;
case I40E_MEDIA_TYPE_BASET:
- ecmd->supported |= SUPPORTED_TP;
- ecmd->advertising |= ADVERTISED_TP;
- ecmd->port = PORT_TP;
+ ethtool_link_ksettings_add_link_mode(cmd, supported, TP);
+ ethtool_link_ksettings_add_link_mode(cmd, advertising, TP);
+ cmd->base.port = PORT_TP;
break;
case I40E_MEDIA_TYPE_DA:
case I40E_MEDIA_TYPE_CX4:
- ecmd->supported |= SUPPORTED_FIBRE;
- ecmd->advertising |= ADVERTISED_FIBRE;
- ecmd->port = PORT_DA;
+ ethtool_link_ksettings_add_link_mode(cmd, supported, FIBRE);
+ ethtool_link_ksettings_add_link_mode(cmd, advertising, FIBRE);
+ cmd->base.port = PORT_DA;
break;
case I40E_MEDIA_TYPE_FIBER:
- ecmd->supported |= SUPPORTED_FIBRE;
- ecmd->port = PORT_FIBRE;
+ ethtool_link_ksettings_add_link_mode(cmd, supported, FIBRE);
+ cmd->base.port = PORT_FIBRE;
break;
case I40E_MEDIA_TYPE_UNKNOWN:
default:
- ecmd->port = PORT_OTHER;
+ cmd->base.port = PORT_OTHER;
break;
}
- /* Set transceiver */
- ecmd->transceiver = XCVR_EXTERNAL;
-
/* Set flow control settings */
- ecmd->supported |= SUPPORTED_Pause;
+ ethtool_link_ksettings_add_link_mode(cmd, supported, Pause);
switch (hw->fc.requested_mode) {
case I40E_FC_FULL:
- ecmd->advertising |= ADVERTISED_Pause;
+ ethtool_link_ksettings_add_link_mode(cmd, advertising,
+ Pause);
break;
case I40E_FC_TX_PAUSE:
- ecmd->advertising |= ADVERTISED_Asym_Pause;
+ ethtool_link_ksettings_add_link_mode(cmd, advertising,
+ Asym_Pause);
break;
case I40E_FC_RX_PAUSE:
- ecmd->advertising |= (ADVERTISED_Pause |
- ADVERTISED_Asym_Pause);
+ ethtool_link_ksettings_add_link_mode(cmd, advertising,
+ Pause);
+ ethtool_link_ksettings_add_link_mode(cmd, advertising,
+ Asym_Pause);
break;
default:
- ecmd->advertising &= ~(ADVERTISED_Pause |
- ADVERTISED_Asym_Pause);
+ ethtool_convert_link_mode_to_legacy_u32(
+ &advertising, cmd->link_modes.advertising);
+
+ advertising &= ~(ADVERTISED_Pause | ADVERTISED_Asym_Pause);
+
+ ethtool_convert_legacy_u32_to_link_mode(
+ cmd->link_modes.advertising, advertising);
break;
}
*
* Set speed/duplex per media_types advertised/forced
**/
-static int i40e_set_settings(struct net_device *netdev,
- struct ethtool_cmd *ecmd)
+static int i40e_set_link_ksettings(struct net_device *netdev,
+ const struct ethtool_link_ksettings *cmd)
{
struct i40e_netdev_priv *np = netdev_priv(netdev);
struct i40e_aq_get_phy_abilities_resp abilities;
struct i40e_pf *pf = np->vsi->back;
struct i40e_vsi *vsi = np->vsi;
struct i40e_hw *hw = &pf->hw;
- struct ethtool_cmd safe_ecmd;
+ struct ethtool_link_ksettings safe_cmd;
+ struct ethtool_link_ksettings copy_cmd;
i40e_status status = 0;
bool change = false;
int err = 0;
- u8 autoneg;
+ u32 autoneg;
u32 advertise;
+ u32 tmp;
/* Changing port settings is not supported if this isn't the
* port's controlling PF
return -EOPNOTSUPP;
}
+ /* copy the cmd to copy_cmd to avoid modifying the origin */
+ memcpy(©_cmd, cmd, sizeof(struct ethtool_link_ksettings));
+
/* get our own copy of the bits to check against */
- memset(&safe_ecmd, 0, sizeof(struct ethtool_cmd));
- i40e_get_settings(netdev, &safe_ecmd);
+ memset(&safe_cmd, 0, sizeof(struct ethtool_link_ksettings));
+ i40e_get_link_ksettings(netdev, &safe_cmd);
- /* save autoneg and speed out of ecmd */
- autoneg = ecmd->autoneg;
- advertise = ecmd->advertising;
+ /* save autoneg and speed out of cmd */
+ autoneg = cmd->base.autoneg;
+ ethtool_convert_link_mode_to_legacy_u32(&advertise,
+ cmd->link_modes.advertising);
/* set autoneg and speed back to what they currently are */
- ecmd->autoneg = safe_ecmd.autoneg;
- ecmd->advertising = safe_ecmd.advertising;
+ copy_cmd.base.autoneg = safe_cmd.base.autoneg;
+ ethtool_convert_link_mode_to_legacy_u32(
+ &tmp, safe_cmd.link_modes.advertising);
+ ethtool_convert_legacy_u32_to_link_mode(
+ copy_cmd.link_modes.advertising, tmp);
+
+ copy_cmd.base.cmd = safe_cmd.base.cmd;
- ecmd->cmd = safe_ecmd.cmd;
- /* If ecmd and safe_ecmd are not the same now, then they are
+ /* If copy_cmd and safe_cmd are not the same now, then they are
* trying to set something that we do not support
*/
- if (memcmp(ecmd, &safe_ecmd, sizeof(struct ethtool_cmd)))
+ if (memcmp(©_cmd, &safe_cmd, sizeof(struct ethtool_link_ksettings)))
return -EOPNOTSUPP;
while (test_bit(__I40E_CONFIG_BUSY, &vsi->state))
/* If autoneg was not already enabled */
if (!(hw->phy.link_info.an_info & I40E_AQ_AN_COMPLETED)) {
/* If autoneg is not supported, return error */
- if (!(safe_ecmd.supported & SUPPORTED_Autoneg)) {
+ if (!ethtool_link_ksettings_test_link_mode(
+ &safe_cmd, supported, Autoneg)) {
netdev_info(netdev, "Autoneg not supported on this phy\n");
return -EINVAL;
}
/* If autoneg is supported 10GBASE_T is the only PHY
* that can disable it, so otherwise return error
*/
- if (safe_ecmd.supported & SUPPORTED_Autoneg &&
+ if (ethtool_link_ksettings_test_link_mode(
+ &safe_cmd, supported, Autoneg) &&
hw->phy.link_info.phy_type !=
I40E_PHY_TYPE_10GBASE_T) {
netdev_info(netdev, "Autoneg cannot be disabled on this phy\n");
}
}
- if (advertise & ~safe_ecmd.supported)
+ ethtool_convert_link_mode_to_legacy_u32(&tmp,
+ safe_cmd.link_modes.supported);
+ if (advertise & ~tmp)
return -EINVAL;
if (advertise & ADVERTISED_100baseT_Full)
}
static const struct ethtool_ops i40e_ethtool_ops = {
- .get_settings = i40e_get_settings,
- .set_settings = i40e_set_settings,
.get_drvinfo = i40e_get_drvinfo,
.get_regs_len = i40e_get_regs_len,
.get_regs = i40e_get_regs,
.set_priv_flags = i40e_set_priv_flags,
.get_per_queue_coalesce = i40e_get_per_queue_coalesce,
.set_per_queue_coalesce = i40e_set_per_queue_coalesce,
+ .get_link_ksettings = i40e_get_link_ksettings,
+ .set_link_ksettings = i40e_set_link_ksettings,
};
void i40e_set_ethtool_ops(struct net_device *netdev)
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff