greybus: arche-platfrom: Get rid of 2sec delay in USB3613 configuration

Earlier during boot sequence implementation, we had seen race between
USb3613 and APB boot, and since APB boot time is ~2sec, we delayed
USb3613 configuration for 2sec after APB deassertion of reset.

This obviously won't work in the case of suspend/resume, where we would
like to put APB into OFF state and coldboot in resume.

With the latest FW changes, we do not see any race issue. I have done
regression testing (> 50 iteration of reboot + unipro link up and down)
without any issues.

So lets get rid of the 2sec delay with this patch.

Testing Done: Tested on EVT 1.5 platform.

Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Tested-by: David Lin <dtwlin@google.com>
Reviewed-by: David Lin <dtwlin@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

diff --git a/drivers/staging/greybus/arche-platform.c b/drivers/staging/greybus/arche-platform.c
index 3293661d876a19bff26fc4273a4d3a2d0402276a..48cdb0fffcfc870f203f9f3ebf6b56b2bfc9211c 100644 (file)
--- a/drivers/staging/greybus/arche-platform.c
+++ b/drivers/staging/greybus/arche-platform.c
@@ -52,7 +52,6 @@ struct arche_platform_drvdata {
 
        int num_apbs;
 
-       struct delayed_work delayed_work;
        enum svc_wakedetect_state wake_detect_state;
        int wake_detect_irq;
        spinlock_t lock;
@@ -101,24 +100,6 @@ static int apb_poweroff(struct device *dev, void *data)
        return 0;
 }
 
-/**
- * hub_conf_delayed_work - Configures USB3613 device to HUB mode
- *
- * The idea here is to split the APB coldboot operation with slow HUB configuration,
- * so that driver response to wake/detect event can be met.
- * So expectation is, once code reaches here, means initial unipro linkup
- * between APB<->Switch was successful, so now just take it to AP.
- */
-static void hub_conf_delayed_work(struct work_struct *work)
-{
-       struct arche_platform_drvdata *arche_pdata =
-               container_of(work, struct arche_platform_drvdata, delayed_work.work);
-
-       /* Enable HUB3613 into HUB mode. */
-       if (usb3613_hub_mode_ctrl(true))
-               dev_warn(arche_pdata->dev, "failed to control hub device\n");
-}
-
 static void assert_wakedetect(struct arche_platform_drvdata *arche_pdata)
 {
        /* Assert wake/detect = Detect event from AP */
@@ -150,9 +131,11 @@ static irqreturn_t arche_platform_wd_irq_thread(int irq, void *devid)
        /* Bring APB out of reset: cold boot sequence */
        device_for_each_child(arche_pdata->dev, NULL, apb_cold_boot);
 
+       /* Enable HUB3613 into HUB mode. */
+       if (usb3613_hub_mode_ctrl(true))
+               dev_warn(arche_pdata->dev, "failed to control hub device\n");
+
        spin_lock_irqsave(&arche_pdata->lock, flags);
-       /* USB HUB configuration */
-       schedule_delayed_work(&arche_pdata->delayed_work, msecs_to_jiffies(2000));
        arche_pdata->wake_detect_state = WD_STATE_IDLE;
        spin_unlock_irqrestore(&arche_pdata->lock, flags);
 
@@ -178,8 +161,6 @@ static irqreturn_t arche_platform_wd_irq(int irq, void *devid)
                        if (time_before(jiffies,
                                        arche_pdata->wake_detect_start +
                                        msecs_to_jiffies(WD_COLDBOOT_PULSE_WIDTH_MS))) {
-                               /* No harm with cancellation, even if not pending */
-                               cancel_delayed_work(&arche_pdata->delayed_work);
                                arche_pdata->wake_detect_state = WD_STATE_IDLE;
                        } else {
                                /* Check we are not in middle of irq thread already */
@@ -196,8 +177,6 @@ static irqreturn_t arche_platform_wd_irq(int irq, void *devid)
                /* wake/detect falling */
                if (arche_pdata->wake_detect_state == WD_STATE_IDLE) {
                        arche_pdata->wake_detect_start = jiffies;
-                       /* No harm with cancellation even if it is not pending*/
-                       cancel_delayed_work(&arche_pdata->delayed_work);
                        /*
                         * In the begining, when wake/detect goes low (first time), we assume
                         * it is meant for coldboot and set the flag. If wake/detect line stays low
@@ -494,7 +473,6 @@ static int arche_platform_probe(struct platform_device *pdev)
        }
 
        assert_wakedetect(arche_pdata);
-       INIT_DELAYED_WORK(&arche_pdata->delayed_work, hub_conf_delayed_work);
 
        dev_info(dev, "Device registered successfully\n");
        return 0;
@@ -520,7 +498,6 @@ static int arche_platform_remove(struct platform_device *pdev)
        struct arche_platform_drvdata *arche_pdata = platform_get_drvdata(pdev);
 
        device_remove_file(&pdev->dev, &dev_attr_state);
-       cancel_delayed_work_sync(&arche_pdata->delayed_work);
        device_for_each_child(&pdev->dev, NULL, arche_remove_child);
        arche_platform_poweroff_seq(arche_pdata);
        platform_set_drvdata(pdev, NULL);