#include <linux/percpu.h>
#include <linux/smp.h>
#include <asm/byteorder.h>
+#include <asm/processor.h>
#include <asm/i387.h>
#include "padlock.h"
+/* number of data blocks actually fetched for each xcrypt insn */
+static unsigned int ecb_fetch_blocks = 2;
+static unsigned int cbc_fetch_blocks = 1;
+
+#define ecb_fetch_bytes (ecb_fetch_blocks * AES_BLOCK_SIZE)
+#define cbc_fetch_bytes (cbc_fetch_blocks * AES_BLOCK_SIZE)
+
/* Control word. */
struct cword {
unsigned int __attribute__ ((__packed__))
*/
static inline void padlock_xcrypt(const u8 *input, u8 *output, void *key,
- struct cword *control_word)
+ struct cword *control_word, int count)
{
asm volatile (".byte 0xf3,0x0f,0xa7,0xc8" /* rep xcryptecb */
: "+S"(input), "+D"(output)
- : "d"(control_word), "b"(key), "c"(1));
+ : "d"(control_word), "b"(key), "c"(count));
}
-static void aes_crypt_copy(const u8 *in, u8 *out, u32 *key, struct cword *cword)
+static void aes_crypt_copy(const u8 *in, u8 *out, u32 *key,
+ struct cword *cword, int count)
{
- u8 buf[AES_BLOCK_SIZE * 2 + PADLOCK_ALIGNMENT - 1];
+ /*
+ * Padlock prefetches extra data so we must provide mapped input buffers.
+ * Assume there are at least 16 bytes of stack already in use.
+ */
+ u8 buf[AES_BLOCK_SIZE * 7 + PADLOCK_ALIGNMENT - 1];
u8 *tmp = PTR_ALIGN(&buf[0], PADLOCK_ALIGNMENT);
- memcpy(tmp, in, AES_BLOCK_SIZE);
- padlock_xcrypt(tmp, out, key, cword);
+ memcpy(tmp, in, count * AES_BLOCK_SIZE);
+ padlock_xcrypt(tmp, out, key, cword, count);
}
static inline void aes_crypt(const u8 *in, u8 *out, u32 *key,
- struct cword *cword)
+ struct cword *cword, int count)
{
- /* padlock_xcrypt requires at least two blocks of data. */
- if (unlikely(!(((unsigned long)in ^ (PAGE_SIZE - AES_BLOCK_SIZE)) &
- (PAGE_SIZE - 1)))) {
- aes_crypt_copy(in, out, key, cword);
+ /* Padlock in ECB mode fetches at least ecb_fetch_bytes of data.
+ * We could avoid some copying here but it's probably not worth it.
+ */
+ if (unlikely(((unsigned long)in & PAGE_SIZE) + ecb_fetch_bytes > PAGE_SIZE)) {
+ aes_crypt_copy(in, out, key, cword, count);
return;
}
- padlock_xcrypt(in, out, key, cword);
+ padlock_xcrypt(in, out, key, cword, count);
}
static inline void padlock_xcrypt_ecb(const u8 *input, u8 *output, void *key,
void *control_word, u32 count)
{
- if (count == 1) {
- aes_crypt(input, output, key, control_word);
+ u32 initial = count & (ecb_fetch_blocks - 1);
+
+ if (count < ecb_fetch_blocks) {
+ aes_crypt(input, output, key, control_word, count);
return;
}
- asm volatile ("test $1, %%cl;"
- "je 1f;"
-#ifndef CONFIG_X86_64
- "lea -1(%%ecx), %%eax;"
- "mov $1, %%ecx;"
-#else
- "lea -1(%%rcx), %%rax;"
- "mov $1, %%rcx;"
-#endif
- ".byte 0xf3,0x0f,0xa7,0xc8;" /* rep xcryptecb */
-#ifndef CONFIG_X86_64
- "mov %%eax, %%ecx;"
-#else
- "mov %%rax, %%rcx;"
-#endif
- "1:"
- ".byte 0xf3,0x0f,0xa7,0xc8" /* rep xcryptecb */
+ if (initial)
+ asm volatile (".byte 0xf3,0x0f,0xa7,0xc8" /* rep xcryptecb */
+ : "+S"(input), "+D"(output)
+ : "d"(control_word), "b"(key), "c"(initial));
+
+ asm volatile (".byte 0xf3,0x0f,0xa7,0xc8" /* rep xcryptecb */
: "+S"(input), "+D"(output)
- : "d"(control_word), "b"(key), "c"(count)
- : "ax");
+ : "d"(control_word), "b"(key), "c"(count - initial));
}
static inline u8 *padlock_xcrypt_cbc(const u8 *input, u8 *output, void *key,
padlock_reset_key(&ctx->cword.encrypt);
ts_state = irq_ts_save();
- aes_crypt(in, out, ctx->E, &ctx->cword.encrypt);
+ aes_crypt(in, out, ctx->E, &ctx->cword.encrypt, 1);
irq_ts_restore(ts_state);
padlock_store_cword(&ctx->cword.encrypt);
}
padlock_reset_key(&ctx->cword.encrypt);
ts_state = irq_ts_save();
- aes_crypt(in, out, ctx->D, &ctx->cword.decrypt);
+ aes_crypt(in, out, ctx->D, &ctx->cword.decrypt, 1);
irq_ts_restore(ts_state);
padlock_store_cword(&ctx->cword.encrypt);
}
static int __init padlock_init(void)
{
int ret;
+ struct cpuinfo_x86 *c = &cpu_data(0);
if (!cpu_has_xcrypt) {
printk(KERN_NOTICE PFX "VIA PadLock not detected.\n");
printk(KERN_NOTICE PFX "Using VIA PadLock ACE for AES algorithm.\n");
+ if (c->x86 == 6 && c->x86_model == 15 && c->x86_mask == 2) {
+ ecb_fetch_blocks = 8;
+ cbc_fetch_blocks = 4; /* NOTE: notused */
+ printk(KERN_NOTICE PFX "VIA Nano stepping 2 detected: enabling workaround.\n");
+ }
+
out:
return ret;