extcon: sm5502: Change internal hardware switch according to cable type
authorChanwoo Choi <cw00.choi@samsung.com>
Wed, 28 May 2014 06:35:29 +0000 (15:35 +0900)
committerChanwoo Choi <cw00.choi@samsung.com>
Wed, 23 Jul 2014 01:22:35 +0000 (10:22 +0900)
This patch changes internal hardware DP_CON/DM_CON switch according to
cable type. The SM5502 MUIC device can set hardware switch as following:
- OPEN (not connected state) / USB / UART / AUDIO
Also, this patch set VBUSIN switch according to cable type.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
drivers/extcon/extcon-sm5502.c
include/linux/extcon/sm5502.h

index a32d40f97ff0ba9ca5a91748a7f925fb6ca97328..560d7dccec7b25a0886d8b8ef696608478b2aa67 100644 (file)
@@ -228,6 +228,61 @@ static const struct regmap_config sm5502_muic_regmap_config = {
        .max_register   = SM5502_REG_END,
 };
 
+/* Change DM_CON/DP_CON/VBUSIN switch according to cable type */
+static int sm5502_muic_set_path(struct sm5502_muic_info *info,
+                               unsigned int con_sw, unsigned int vbus_sw,
+                               bool attached)
+{
+       int ret;
+
+       if (!attached) {
+               con_sw  = DM_DP_SWITCH_OPEN;
+               vbus_sw = VBUSIN_SWITCH_OPEN;
+       }
+
+       switch (con_sw) {
+       case DM_DP_SWITCH_OPEN:
+       case DM_DP_SWITCH_USB:
+       case DM_DP_SWITCH_AUDIO:
+       case DM_DP_SWITCH_UART:
+               ret = regmap_update_bits(info->regmap, SM5502_REG_MANUAL_SW1,
+                                        SM5502_REG_MANUAL_SW1_DP_MASK |
+                                        SM5502_REG_MANUAL_SW1_DM_MASK,
+                                        con_sw);
+               if (ret < 0) {
+                       dev_err(info->dev,
+                               "cannot update DM_CON/DP_CON switch\n");
+                       return ret;
+               }
+               break;
+       default:
+               dev_err(info->dev, "Unknown DM_CON/DP_CON switch type (%d)\n",
+                               con_sw);
+               return -EINVAL;
+       };
+
+       switch (vbus_sw) {
+       case VBUSIN_SWITCH_OPEN:
+       case VBUSIN_SWITCH_VBUSOUT:
+       case VBUSIN_SWITCH_MIC:
+       case VBUSIN_SWITCH_VBUSOUT_WITH_USB:
+               ret = regmap_update_bits(info->regmap, SM5502_REG_MANUAL_SW1,
+                                        SM5502_REG_MANUAL_SW1_VBUSIN_MASK,
+                                        vbus_sw);
+               if (ret < 0) {
+                       dev_err(info->dev,
+                               "cannot update VBUSIN switch\n");
+                       return ret;
+               }
+               break;
+       default:
+               dev_err(info->dev, "Unknown VBUS switch type (%d)\n", vbus_sw);
+               return -EINVAL;
+       };
+
+       return 0;
+}
+
 /* Return cable type of attached or detached accessories */
 static unsigned int sm5502_muic_get_cable_type(struct sm5502_muic_info *info)
 {
@@ -329,7 +384,10 @@ static int sm5502_muic_cable_handler(struct sm5502_muic_info *info,
        static unsigned int prev_cable_type = SM5502_MUIC_ADC_GROUND;
        const char **cable_names = info->edev->supported_cable;
        unsigned int cable_type = SM5502_MUIC_ADC_GROUND;
+       unsigned int con_sw = DM_DP_SWITCH_OPEN;
+       unsigned int vbus_sw = VBUSIN_SWITCH_OPEN;
        unsigned int idx = 0;
+       int ret;
 
        if (!cable_names)
                return 0;
@@ -343,15 +401,19 @@ static int sm5502_muic_cable_handler(struct sm5502_muic_info *info,
 
        switch (cable_type) {
        case SM5502_MUIC_ADC_OPEN_USB:
-               idx = EXTCON_CABLE_USB;
+               idx     = EXTCON_CABLE_USB;
+               con_sw  = DM_DP_SWITCH_USB;
+               vbus_sw = VBUSIN_SWITCH_VBUSOUT_WITH_USB;
                break;
        case SM5502_MUIC_ADC_OPEN_TA:
-               idx = EXTCON_CABLE_TA;
+               idx     = EXTCON_CABLE_TA;
+               con_sw  = DM_DP_SWITCH_OPEN;
+               vbus_sw = VBUSIN_SWITCH_VBUSOUT;
                break;
        case SM5502_MUIC_ADC_OPEN_USB_OTG:
-               idx = EXTCON_CABLE_USB_HOST;
-               break;
-       case SM5502_MUIC_ADC_GROUND:
+               idx     = EXTCON_CABLE_USB_HOST;
+               con_sw  = DM_DP_SWITCH_USB;
+               vbus_sw = VBUSIN_SWITCH_OPEN;
                break;
        default:
                dev_dbg(info->dev,
@@ -359,6 +421,12 @@ static int sm5502_muic_cable_handler(struct sm5502_muic_info *info,
                return 0;
        };
 
+       /* Change internal hardware path(DM_CON/DP_CON, VBUSIN) */
+       ret = sm5502_muic_set_path(info, con_sw, vbus_sw, attached);
+       if (ret < 0)
+               return ret;
+
+       /* Change the state of external accessory */
        extcon_set_cable_state(info->edev, cable_names[idx], attached);
 
        return 0;
index 17bd6550c485183a1b6f9f9b36b9f87ba8e27b8c..030526bf8d797fcd2b321bdd62cc278cbaae013c 100644 (file)
@@ -223,6 +223,29 @@ enum sm5502_reg {
 #define SM5502_REG_DEV_TYPE2_TTY_MASK                  (0x1 << SM5502_REG_DEV_TYPE2_TTY_SHIFT)
 #define SM5502_REG_DEV_TYPE2_AV_CABLE_MASK             (0x1 << SM5502_REG_DEV_TYPE2_AV_CABLE_SHIFT)
 
+#define SM5502_REG_MANUAL_SW1_VBUSIN_SHIFT     0
+#define SM5502_REG_MANUAL_SW1_DP_SHIFT         2
+#define SM5502_REG_MANUAL_SW1_DM_SHIFT         5
+#define SM5502_REG_MANUAL_SW1_VBUSIN_MASK      (0x3 << SM5502_REG_MANUAL_SW1_VBUSIN_SHIFT)
+#define SM5502_REG_MANUAL_SW1_DP_MASK          (0x7 << SM5502_REG_MANUAL_SW1_DP_SHIFT)
+#define SM5502_REG_MANUAL_SW1_DM_MASK          (0x7 << SM5502_REG_MANUAL_SW1_DM_SHIFT)
+#define VBUSIN_SWITCH_OPEN                     0x0
+#define VBUSIN_SWITCH_VBUSOUT                  0x1
+#define VBUSIN_SWITCH_MIC                      0x2
+#define VBUSIN_SWITCH_VBUSOUT_WITH_USB         0x3
+#define DM_DP_CON_SWITCH_OPEN                  0x0
+#define DM_DP_CON_SWITCH_USB                   0x1
+#define DM_DP_CON_SWITCH_AUDIO                 0x2
+#define DM_DP_CON_SWITCH_UART                  0x3
+#define DM_DP_SWITCH_OPEN                      ((DM_DP_CON_SWITCH_OPEN <<SM5502_REG_MANUAL_SW1_DP_SHIFT) \
+                                               | (DM_DP_CON_SWITCH_OPEN <<SM5502_REG_MANUAL_SW1_DM_SHIFT))
+#define DM_DP_SWITCH_USB                       ((DM_DP_CON_SWITCH_USB <<SM5502_REG_MANUAL_SW1_DP_SHIFT) \
+                                               | (DM_DP_CON_SWITCH_USB <<SM5502_REG_MANUAL_SW1_DM_SHIFT))
+#define DM_DP_SWITCH_AUDIO                     ((DM_DP_CON_SWITCH_AUDIO <<SM5502_REG_MANUAL_SW1_DP_SHIFT) \
+                                               | (DM_DP_CON_SWITCH_AUDIO <<SM5502_REG_MANUAL_SW1_DM_SHIFT))
+#define DM_DP_SWITCH_UART                      ((DM_DP_CON_SWITCH_UART <<SM5502_REG_MANUAL_SW1_DP_SHIFT) \
+                                               | (DM_DP_CON_SWITCH_UART <<SM5502_REG_MANUAL_SW1_DM_SHIFT))
+
 /* SM5502 Interrupts */
 enum sm5502_irq {
        /* INT1 */