/**
* struct adc_jack_data - internal data for adc_jack device driver
- * @edev - extcon device.
- * @cable_names - list of supported cables.
- * @num_cables - size of cable_names.
- * @adc_conditions - list of adc value conditions.
- * @num_conditions - size of adc_conditions.
- * @irq - irq number of attach/detach event (0 if not exist).
- * @handling_delay - interrupt handler will schedule extcon event
- * handling at handling_delay jiffies.
- * @handler - extcon event handler called by interrupt handler.
- * @chan - iio channel being queried.
+ * @edev: extcon device.
+ * @cable_names: list of supported cables.
+ * @num_cables: size of cable_names.
+ * @adc_conditions: list of adc value conditions.
+ * @num_conditions: size of adc_conditions.
+ * @irq: irq number of attach/detach event (0 if not exist).
+ * @handling_delay: interrupt handler will schedule extcon event
+ * handling at handling_delay jiffies.
+ * @handler: extcon event handler called by interrupt handler.
+ * @chan: iio channel being queried.
*/
struct adc_jack_data {
struct extcon_dev edev;
/**
* check_mutually_exclusive - Check if new_state violates mutually_exclusive
- * condition.
+ * condition.
* @edev: the extcon device
* @new_state: new cable attach status for @edev
*
/**
* extcon_update_state() - Update the cable attach states of the extcon device
- * only for the masked bits.
+ * only for the masked bits.
* @edev: the extcon device
* @mask: the bit mask to designate updated bits.
* @state: new cable attach status for @edev
edev->state |= state & mask;
raw_notifier_call_chain(&edev->nh, old_state, edev);
-
/* This could be in interrupt handler */
prop_buf = (char *)get_zeroed_page(GFP_ATOMIC);
if (prop_buf) {
/**
* extcon_set_cable_state_() - Set the status of a specific cable.
- * @edev: the extcon device that has the cable.
- * @index: cable index that can be retrieved by extcon_find_cable_index().
+ * @edev: the extcon device that has the cable.
+ * @index: cable index that can be retrieved by
+ * extcon_find_cable_index().
* @cable_state: the new cable status. The default semantics is
* true: attached / false: detached.
*/
/**
* extcon_set_cable_state() - Set the status of a specific cable.
- * @edev: the extcon device that has the cable.
- * @cable_name: cable name.
+ * @edev: the extcon device that has the cable.
+ * @cable_name: cable name.
* @cable_state: the new cable status. The default semantics is
* true: attached / false: detached.
*
/**
* extcon_register_interest() - Register a notifier for a state change of a
- * specific cable, not an entier set of cables of a
- * extcon device.
- * @obj: an empty extcon_specific_cable_nb object to be returned.
+ * specific cable, not an entier set of cables of a
+ * extcon device.
+ * @obj: an empty extcon_specific_cable_nb object to be returned.
* @extcon_name: the name of extcon device.
* if NULL, extcon_register_interest will register
* every cable with the target cable_name given.
* @cable_name: the target cable name.
- * @nb: the notifier block to get notified.
+ * @nb: the notifier block to get notified.
*
* Provide an empty extcon_specific_cable_nb. extcon_register_interest() sets
* the struct for you.
/**
* extcon_unregister_interest() - Unregister the notifier registered by
- * extcon_register_interest().
+ * extcon_register_interest().
* @obj: the extcon_specific_cable_nb object returned by
* extcon_register_interest().
*/
/**
* extcon_register_notifier() - Register a notifiee to get notified by
- * any attach status changes from the extcon.
+ * any attach status changes from the extcon.
* @edev: the extcon device.
* @nb: a notifier block to be registered.
*
enum extcon_cable_name {
EXTCON_USB = 0,
EXTCON_USB_HOST,
- EXTCON_TA, /* Travel Adaptor */
+ EXTCON_TA, /* Travel Adaptor */
EXTCON_FAST_CHARGER,
EXTCON_SLOW_CHARGER,
- EXTCON_CHARGE_DOWNSTREAM, /* Charging an external device */
+ EXTCON_CHARGE_DOWNSTREAM, /* Charging an external device */
EXTCON_HDMI,
EXTCON_MHL,
EXTCON_DVI,
/**
* struct extcon_dev - An extcon device represents one external connector.
- * @name: The name of this extcon device. Parent device name is used
- * if NULL.
+ * @name: The name of this extcon device. Parent device name is
+ * used if NULL.
* @supported_cable: Array of supported cable names ending with NULL.
* If supported_cable is NULL, cable name related APIs
* are disabled.
* be attached simulataneously. {0x7, 0} is equivalent to
* {0x3, 0x6, 0x5, 0}. If it is {0xFFFFFFFF, 0}, there
* can be no simultaneous connections.
- * @print_name: An optional callback to override the method to print the
- * name of the extcon device.
+ * @print_name: An optional callback to override the method to print the
+ * name of the extcon device.
* @print_state: An optional callback to override the method to print the
- * status of the extcon device.
- * @dev: Device of this extcon. Do not provide at register-time.
- * @state: Attach/detach state of this extcon. Do not provide at
- * register-time
- * @nh: Notifier for the state change events from this extcon
- * @entry: To support list of extcon devices so that users can search
- * for extcon devices based on the extcon name.
+ * status of the extcon device.
+ * @dev: Device of this extcon. Do not provide at register-time.
+ * @state: Attach/detach state of this extcon. Do not provide at
+ * register-time.
+ * @nh: Notifier for the state change events from this extcon
+ * @entry: To support list of extcon devices so that users can search
+ * for extcon devices based on the extcon name.
* @lock:
* @max_supported: Internal value to store the number of cables.
* @extcon_dev_type: Device_type struct to provide attribute_groups
* customized for each extcon device.
- * @cables: Sysfs subdirectories. Each represents one cable.
+ * @cables: Sysfs subdirectories. Each represents one cable.
*
* In most cases, users only need to provide "User initializing data" of
* this struct when registering an extcon. In some exceptional cases,
* are overwritten by register function.
*/
struct extcon_dev {
- /* --- Optional user initializing data --- */
- const char *name;
+ /* Optional user initializing data */
+ const char *name;
const char **supported_cable;
- const u32 *mutually_exclusive;
+ const u32 *mutually_exclusive;
- /* --- Optional callbacks to override class functions --- */
+ /* Optional callbacks to override class functions */
ssize_t (*print_name)(struct extcon_dev *edev, char *buf);
ssize_t (*print_state)(struct extcon_dev *edev, char *buf);
- /* --- Internal data. Please do not set. --- */
- struct device *dev;
- u32 state;
+ /* Internal data. Please do not set. */
+ struct device *dev;
struct raw_notifier_head nh;
struct list_head entry;
- spinlock_t lock; /* could be called by irq handler */
int max_supported;
+ spinlock_t lock; /* could be called by irq handler */
+ u32 state;
/* /sys/class/extcon/.../cable.n/... */
struct device_type extcon_dev_type;
struct extcon_cable *cables;
+
/* /sys/class/extcon/.../mutually_exclusive/... */
struct attribute_group attr_g_muex;
struct attribute **attrs_muex;
};
/**
- * struct extcon_cable - An internal data for each cable of extcon device.
- * @edev: The extcon device
+ * struct extcon_cable - An internal data for each cable of extcon device.
+ * @edev: The extcon device
* @cable_index: Index of this cable in the edev
- * @attr_g: Attribute group for the cable
- * @attr_name: "name" sysfs entry
- * @attr_state: "state" sysfs entry
- * @attrs: Array pointing to attr_name and attr_state for attr_g
+ * @attr_g: Attribute group for the cable
+ * @attr_name: "name" sysfs entry
+ * @attr_state: "state" sysfs entry
+ * @attrs: Array pointing to attr_name and attr_state for attr_g
*/
struct extcon_cable {
struct extcon_dev *edev;
/**
* struct extcon_specific_cable_nb - An internal data for
- * extcon_register_interest().
- * @internal_nb: a notifier block bridging extcon notifier and cable notifier.
- * @user_nb: user provided notifier block for events from a specific cable.
+ * extcon_register_interest().
+ * @internal_nb: A notifier block bridging extcon notifier
+ * and cable notifier.
+ * @user_nb: user provided notifier block for events from
+ * a specific cable.
* @cable_index: the target cable.
- * @edev: the target extcon device.
+ * @edev: the target extcon device.
* @previous_value: the saved previous event value.
*/
struct extcon_specific_cable_nb {
/**
* struct adc_jack_cond - condition to use an extcon state
- * @state - the corresponding extcon state (if 0, this struct denotes
- * the last adc_jack_cond element among the array)
- * @min_adc - min adc value for this condition
- * @max_adc - max adc value for this condition
+ * @state: the corresponding extcon state (if 0, this struct
+ * denotes the last adc_jack_cond element among the array)
+ * @min_adc: min adc value for this condition
+ * @max_adc: max adc value for this condition
*
* For example, if { .state = 0x3, .min_adc = 100, .max_adc = 200}, it means
* that if ADC value is between (inclusive) 100 and 200, than the cable 0 and
* because when no adc_jack_cond is met, state = 0 is automatically chosen.
*/
struct adc_jack_cond {
- u32 state; /* extcon state value. 0 if invalid */
+ u32 state; /* extcon state value. 0 if invalid */
u32 min_adc;
u32 max_adc;
};
/**
* struct adc_jack_pdata - platform data for adc jack device.
- * @name - name of the extcon device. If null, "adc-jack" is used.
- * @consumer_channel - Unique name to identify the channel on the consumer
- * side. This typically describes the channels used within
- * the consumer. E.g. 'battery_voltage'
- * @cable_names - array of cable names ending with null.
- * @adc_contitions - array of struct adc_jack_cond conditions ending
- * with .state = 0 entry. This describes how to decode
- * adc values into extcon state.
- * @irq_flags - irq flags used for the @irq
- * @handling_delay_ms - in some devices, we need to read ADC value some
- * milli-seconds after the interrupt occurs. You may
- * describe such delays with @handling_delay_ms, which
- * is rounded-off by jiffies.
+ * @name: name of the extcon device. If null, "adc-jack" is used.
+ * @consumer_channel: Unique name to identify the channel on the consumer
+ * side. This typically describes the channels used within
+ * the consumer. E.g. 'battery_voltage'
+ * @cable_names: array of cable names ending with null.
+ * @adc_contitions: array of struct adc_jack_cond conditions ending
+ * with .state = 0 entry. This describes how to decode
+ * adc values into extcon state.
+ * @irq_flags: irq flags used for the @irq
+ * @handling_delay_ms: in some devices, we need to read ADC value some
+ * milli-seconds after the interrupt occurs. You may
+ * describe such delays with @handling_delay_ms, which
+ * is rounded-off by jiffies.
*/
struct adc_jack_pdata {
const char *name;
const char *consumer_channel;
- /*
- * The last entry should be NULL
- */
+
+ /* The last entry should be NULL */
const char **cable_names;
+
/* The last entry's state should be 0 */
struct adc_jack_cond *adc_conditions;
/**
* struct gpio_extcon_platform_data - A simple GPIO-controlled extcon device.
- * @name The name of this GPIO extcon device.
- * @gpio Corresponding GPIO.
- * @debounce Debounce time for GPIO IRQ in ms.
- * @irq_flags IRQ Flags (e.g., IRQF_TRIGGER_LOW).
- * @state_on print_state is overriden with state_on if attached. If Null,
- * default method of extcon class is used.
- * @state_off print_state is overriden with state_on if detached. If Null,
- * default method of extcon class is used.
+ * @name: The name of this GPIO extcon device.
+ * @gpio: Corresponding GPIO.
+ * @debounce: Debounce time for GPIO IRQ in ms.
+ * @irq_flags: IRQ Flags (e.g., IRQF_TRIGGER_LOW).
+ * @state_on: print_state is overriden with state_on if attached.
+ * If NULL, default method of extcon class is used.
+ * @state_off: print_state is overriden with state_on if detached.
+ * If NUll, default method of extcon class is used.
*
* Note that in order for state_on or state_off to be valid, both state_on
* and state_off should be not NULL. If at least one of them is NULL,
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff