+++ /dev/null
-# Copyright 2009 Samsung Electronics Co.
-# Byungho Min <bhmin@samsung.com>
-#
-# Licensed under GPLv2
-
-config PLAT_S5PC1XX
- bool
- depends on ARCH_S5PC1XX
- default y
- select PLAT_S3C
- select ARM_VIC
- select NO_IOPORT
- select ARCH_REQUIRE_GPIOLIB
- select SAMSUNG_CLKSRC
- select SAMSUNG_IRQ_UART
- select SAMSUNG_IRQ_VIC_TIMER
- select S3C_GPIO_TRACK
- select S3C_GPIO_PULL_UPDOWN
- select S5P_GPIO_DRVSTR
- select S3C_GPIO_CFG_S3C24XX
- select S3C_GPIO_CFG_S3C64XX
- select SAMSUNG_GPIOLIB_4BIT
- help
- Base platform code for any Samsung S5PC1XX device
-
-if PLAT_S5PC1XX
-
-# Configuration options shared by all S3C64XX implementations
-
-config CPU_S5PC100_INIT
- bool
- help
- Common initialisation code for the S5PC1XX
-
-config CPU_S5PC100_CLOCK
- bool
- help
- Common clock support code for the S5PC1XX
-
-# platform specific device setup
-
-endif
+++ /dev/null
-# arch/arm/plat-s5pc1xx/Makefile
-#
-# Copyright 2009 Samsung Electronics Co.
-#
-# Licensed under GPLv2
-
-obj-y :=
-obj-m :=
-obj-n := dummy.o
-obj- :=
-
-# Core files
-
-obj-y += dev-uart.o
-obj-y += cpu.o
-obj-y += irq.o
-obj-y += clock.o
-
-# CPU support
-
-obj-$(CONFIG_CPU_S5PC100_INIT) += s5pc100-init.o
-obj-$(CONFIG_CPU_S5PC100_CLOCK) += s5pc100-clock.o
-
-# Device setup
-
+++ /dev/null
-/* linux/arch/arm/plat-s5pc1xx/clock.c
- *
- * Copyright 2009 Samsung Electronics Co.
- *
- * S5PC1XX Base clock support
- *
- * Based on plat-s3c64xx/clock.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <plat/regs-clock.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-
-struct clk clk_27m = {
- .name = "clk_27m",
- .id = -1,
- .rate = 27000000,
-};
-
-static int clk_48m_ctrl(struct clk *clk, int enable)
-{
- unsigned long flags;
- u32 val;
-
- /* can't rely on clock lock, this register has other usages */
- local_irq_save(flags);
-
- val = __raw_readl(S5PC100_CLKSRC1);
- if (enable)
- val |= S5PC100_CLKSRC1_CLK48M_MASK;
- else
- val &= ~S5PC100_CLKSRC1_CLK48M_MASK;
-
- __raw_writel(val, S5PC100_CLKSRC1);
- local_irq_restore(flags);
-
- return 0;
-}
-
-struct clk clk_48m = {
- .name = "clk_48m",
- .id = -1,
- .rate = 48000000,
- .enable = clk_48m_ctrl,
-};
-
-struct clk clk_54m = {
- .name = "clk_54m",
- .id = -1,
- .rate = 54000000,
-};
-
-struct clk clk_hd0 = {
- .name = "hclkd0",
- .id = -1,
- .rate = 0,
- .parent = NULL,
- .ctrlbit = 0,
- .ops = &clk_ops_def_setrate,
-};
-
-struct clk clk_pd0 = {
- .name = "pclkd0",
- .id = -1,
- .rate = 0,
- .parent = NULL,
- .ctrlbit = 0,
- .ops = &clk_ops_def_setrate,
-};
-
-static int s5pc1xx_clk_gate(void __iomem *reg, struct clk *clk, int enable)
-{
- unsigned int ctrlbit = clk->ctrlbit;
- u32 con;
-
- con = __raw_readl(reg);
- if (enable)
- con |= ctrlbit;
- else
- con &= ~ctrlbit;
- __raw_writel(con, reg);
-
- return 0;
-}
-
-static int s5pc100_clk_d00_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D00, clk, enable);
-}
-
-static int s5pc100_clk_d01_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D01, clk, enable);
-}
-
-static int s5pc100_clk_d02_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D02, clk, enable);
-}
-
-static int s5pc100_clk_d10_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D10, clk, enable);
-}
-
-static int s5pc100_clk_d11_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D11, clk, enable);
-}
-
-static int s5pc100_clk_d12_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D12, clk, enable);
-}
-
-static int s5pc100_clk_d13_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D13, clk, enable);
-}
-
-static int s5pc100_clk_d14_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D14, clk, enable);
-}
-
-static int s5pc100_clk_d15_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D15, clk, enable);
-}
-
-static int s5pc100_clk_d20_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D20, clk, enable);
-}
-
-int s5pc100_sclk0_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_SCLKGATE0, clk, enable);
-}
-
-int s5pc100_sclk1_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_SCLKGATE1, clk, enable);
-}
-
-static struct clk s5pc100_init_clocks_disable[] = {
- {
- .name = "dsi",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d11_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D11_DSI,
- }, {
- .name = "csi",
- .id = -1,
- .parent = &clk_h,
- .enable = s5pc100_clk_d11_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D11_CSI,
- }, {
- .name = "ccan",
- .id = 0,
- .parent = &clk_p,
- .enable = s5pc100_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_CCAN0,
- }, {
- .name = "ccan",
- .id = 1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_CCAN1,
- }, {
- .name = "keypad",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_KEYIF,
- }, {
- .name = "hclkd2",
- .id = -1,
- .parent = NULL,
- .enable = s5pc100_clk_d20_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D20_HCLKD2,
- }, {
- .name = "iis-d2",
- .id = -1,
- .parent = NULL,
- .enable = s5pc100_clk_d20_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D20_I2SD2,
- },
-};
-
-static struct clk s5pc100_init_clocks[] = {
- /* System1 (D0_0) devices */
- {
- .name = "intc",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc100_clk_d00_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D00_INTC,
- }, {
- .name = "tzic",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc100_clk_d00_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D00_TZIC,
- }, {
- .name = "cf-ata",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc100_clk_d00_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D00_CFCON,
- }, {
- .name = "mdma",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc100_clk_d00_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D00_MDMA,
- }, {
- .name = "g2d",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc100_clk_d00_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D00_G2D,
- }, {
- .name = "secss",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc100_clk_d00_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D00_SECSS,
- }, {
- .name = "cssys",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc100_clk_d00_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D00_CSSYS,
- },
-
- /* Memory (D0_1) devices */
- {
- .name = "dmc",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc100_clk_d01_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D01_DMC,
- }, {
- .name = "sromc",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc100_clk_d01_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D01_SROMC,
- }, {
- .name = "onenand",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc100_clk_d01_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D01_ONENAND,
- }, {
- .name = "nand",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc100_clk_d01_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D01_NFCON,
- }, {
- .name = "intmem",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc100_clk_d01_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D01_INTMEM,
- }, {
- .name = "ebi",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc100_clk_d01_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D01_EBI,
- },
-
- /* System2 (D0_2) devices */
- {
- .name = "seckey",
- .id = -1,
- .parent = &clk_pd0,
- .enable = s5pc100_clk_d02_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D02_SECKEY,
- }, {
- .name = "sdm",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc100_clk_d02_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D02_SDM,
- },
-
- /* File (D1_0) devices */
- {
- .name = "pdma",
- .id = 0,
- .parent = &clk_h,
- .enable = s5pc100_clk_d10_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D10_PDMA0,
- }, {
- .name = "pdma",
- .id = 1,
- .parent = &clk_h,
- .enable = s5pc100_clk_d10_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D10_PDMA1,
- }, {
- .name = "usb-host",
- .id = -1,
- .parent = &clk_h,
- .enable = s5pc100_clk_d10_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D10_USBHOST,
- }, {
- .name = "otg",
- .id = -1,
- .parent = &clk_h,
- .enable = s5pc100_clk_d10_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D10_USBOTG,
- }, {
- .name = "modem",
- .id = -1,
- .parent = &clk_h,
- .enable = s5pc100_clk_d10_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D10_MODEMIF,
- }, {
- .name = "hsmmc",
- .id = 0,
- .parent = &clk_48m,
- .enable = s5pc100_clk_d10_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D10_HSMMC0,
- }, {
- .name = "hsmmc",
- .id = 1,
- .parent = &clk_48m,
- .enable = s5pc100_clk_d10_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D10_HSMMC1,
- }, {
- .name = "hsmmc",
- .id = 2,
- .parent = &clk_48m,
- .enable = s5pc100_clk_d10_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D10_HSMMC2,
- },
-
- /* Multimedia1 (D1_1) devices */
- {
- .name = "lcd",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d11_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D11_LCD,
- }, {
- .name = "rotator",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d11_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D11_ROTATOR,
- }, {
- .name = "fimc",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d11_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D11_FIMC0,
- }, {
- .name = "fimc",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d11_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D11_FIMC1,
- }, {
- .name = "fimc",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d11_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D11_FIMC2,
- }, {
- .name = "jpeg",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d11_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D11_JPEG,
- }, {
- .name = "g3d",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d11_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D11_G3D,
- },
-
- /* Multimedia2 (D1_2) devices */
- {
- .name = "tv",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d12_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D12_TV,
- }, {
- .name = "vp",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d12_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D12_VP,
- }, {
- .name = "mixer",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d12_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D12_MIXER,
- }, {
- .name = "hdmi",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d12_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D12_HDMI,
- }, {
- .name = "mfc",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d12_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D12_MFC,
- },
-
- /* System (D1_3) devices */
- {
- .name = "chipid",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d13_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D13_CHIPID,
- }, {
- .name = "gpio",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d13_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D13_GPIO,
- }, {
- .name = "apc",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d13_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D13_APC,
- }, {
- .name = "iec",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d13_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D13_IEC,
- }, {
- .name = "timers",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d13_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D13_PWM,
- }, {
- .name = "systimer",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d13_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D13_SYSTIMER,
- }, {
- .name = "watchdog",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d13_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D13_WDT,
- }, {
- .name = "rtc",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d13_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D13_RTC,
- },
-
- /* Connectivity (D1_4) devices */
- {
- .name = "uart",
- .id = 0,
- .parent = &clk_p,
- .enable = s5pc100_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_UART0,
- }, {
- .name = "uart",
- .id = 1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_UART1,
- }, {
- .name = "uart",
- .id = 2,
- .parent = &clk_p,
- .enable = s5pc100_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_UART2,
- }, {
- .name = "uart",
- .id = 3,
- .parent = &clk_p,
- .enable = s5pc100_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_UART3,
- }, {
- .name = "i2c",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_IIC,
- }, {
- .name = "hdmi-i2c",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_HDMI_IIC,
- }, {
- .name = "spi",
- .id = 0,
- .parent = &clk_p,
- .enable = s5pc100_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_SPI0,
- }, {
- .name = "spi",
- .id = 1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_SPI1,
- }, {
- .name = "spi",
- .id = 2,
- .parent = &clk_p,
- .enable = s5pc100_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_SPI2,
- }, {
- .name = "irda",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_IRDA,
- }, {
- .name = "hsitx",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_HSITX,
- }, {
- .name = "hsirx",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_HSIRX,
- },
-
- /* Audio (D1_5) devices */
- {
- .name = "iis",
- .id = 0,
- .parent = &clk_p,
- .enable = s5pc100_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_IIS0,
- }, {
- .name = "iis",
- .id = 1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_IIS1,
- }, {
- .name = "iis",
- .id = 2,
- .parent = &clk_p,
- .enable = s5pc100_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_IIS2,
- }, {
- .name = "ac97",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_AC97,
- }, {
- .name = "pcm",
- .id = 0,
- .parent = &clk_p,
- .enable = s5pc100_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_PCM0,
- }, {
- .name = "pcm",
- .id = 1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_PCM1,
- }, {
- .name = "spdif",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_SPDIF,
- }, {
- .name = "adc",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_TSADC,
- }, {
- .name = "cg",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_CG,
- },
-
- /* Audio (D2_0) devices: all disabled */
-
- /* Special Clocks 0 */
- {
- .name = "sclk_hpm",
- .id = -1,
- .parent = NULL,
- .enable = s5pc100_sclk0_ctrl,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_HPM,
- }, {
- .name = "sclk_onenand",
- .id = -1,
- .parent = NULL,
- .enable = s5pc100_sclk0_ctrl,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_ONENAND,
- }, {
- .name = "spi_48",
- .id = 0,
- .parent = &clk_48m,
- .enable = s5pc100_sclk0_ctrl,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI0_48,
- }, {
- .name = "spi_48",
- .id = 1,
- .parent = &clk_48m,
- .enable = s5pc100_sclk0_ctrl,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI1_48,
- }, {
- .name = "spi_48",
- .id = 2,
- .parent = &clk_48m,
- .enable = s5pc100_sclk0_ctrl,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI2_48,
- }, {
- .name = "mmc_48",
- .id = 0,
- .parent = &clk_48m,
- .enable = s5pc100_sclk0_ctrl,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC0_48,
- }, {
- .name = "mmc_48",
- .id = 1,
- .parent = &clk_48m,
- .enable = s5pc100_sclk0_ctrl,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC1_48,
- }, {
- .name = "mmc_48",
- .id = 2,
- .parent = &clk_48m,
- .enable = s5pc100_sclk0_ctrl,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC2_48,
- },
- /* Special Clocks 1 */
-};
-
-static struct clk *clks[] __initdata = {
- &clk_ext,
- &clk_epll,
- &clk_pd0,
- &clk_hd0,
- &clk_27m,
- &clk_48m,
- &clk_54m,
-};
-
-void __init s5pc1xx_register_clocks(void)
-{
- struct clk *clkp;
- int ret;
- int ptr;
- int size;
-
- s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-
- s3c_register_clocks(s5pc100_init_clocks,
- ARRAY_SIZE(s5pc100_init_clocks));
-
- clkp = s5pc100_init_clocks_disable;
- size = ARRAY_SIZE(s5pc100_init_clocks_disable);
-
- for (ptr = 0; ptr < size; ptr++, clkp++) {
- ret = s3c24xx_register_clock(clkp);
- if (ret < 0) {
- printk(KERN_ERR "Failed to register clock %s (%d)\n",
- clkp->name, ret);
- }
-
- (clkp->enable)(clkp, 0);
- }
-
- s3c_pwmclk_init();
-}
+++ /dev/null
-/* linux/arch/arm/plat-s5pc1xx/cpu.c
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * S5PC1XX CPU Support
- *
- * Based on plat-s3c64xx/cpu.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <asm/mach/map.h>
-
-#include <plat/regs-serial.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-
-#include <plat/s5pc100.h>
-
-/* table of supported CPUs */
-
-static const char name_s5pc100[] = "S5PC100";
-
-static struct cpu_table cpu_ids[] __initdata = {
- {
- .idcode = 0x43100000,
- .idmask = 0xfffff000,
- .map_io = s5pc100_map_io,
- .init_clocks = s5pc100_init_clocks,
- .init_uarts = s5pc100_init_uarts,
- .init = s5pc100_init,
- .name = name_s5pc100,
- },
-};
-/* minimal IO mapping */
-
-/* see notes on uart map in arch/arm/mach-s5pc100/include/mach/debug-macro.S */
-#define UART_OFFS (S3C_PA_UART & 0xffff)
-
-static struct map_desc s5pc1xx_iodesc[] __initdata = {
- {
- .virtual = (unsigned long)S5PC1XX_VA_CLK_OTHER,
- .pfn = __phys_to_pfn(S5PC1XX_PA_CLK_OTHER),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5PC1XX_VA_GPIO,
- .pfn = __phys_to_pfn(S5PC100_PA_GPIO),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5PC1XX_VA_CHIPID,
- .pfn = __phys_to_pfn(S5PC1XX_PA_CHIPID),
- .length = SZ_16,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5PC1XX_VA_CLK,
- .pfn = __phys_to_pfn(S5PC1XX_PA_CLK),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5PC1XX_VA_PWR,
- .pfn = __phys_to_pfn(S5PC1XX_PA_PWR),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)(S5PC1XX_VA_UART),
- .pfn = __phys_to_pfn(S5PC1XX_PA_UART),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5PC1XX_VA_VIC(0),
- .pfn = __phys_to_pfn(S5PC1XX_PA_VIC(0)),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5PC1XX_VA_VIC(1),
- .pfn = __phys_to_pfn(S5PC1XX_PA_VIC(1)),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5PC1XX_VA_VIC(2),
- .pfn = __phys_to_pfn(S5PC1XX_PA_VIC(2)),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5PC1XX_VA_TIMER,
- .pfn = __phys_to_pfn(S5PC1XX_PA_TIMER),
- .length = SZ_256,
- .type = MT_DEVICE,
- },
-};
-
-/* read cpu identification code */
-
-void __init s5pc1xx_init_io(struct map_desc *mach_desc, int size)
-{
- unsigned long idcode;
-
- /* initialise the io descriptors we need for initialisation */
- iotable_init(s5pc1xx_iodesc, ARRAY_SIZE(s5pc1xx_iodesc));
- iotable_init(mach_desc, size);
-
- idcode = __raw_readl(S5PC1XX_VA_CHIPID);
- s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
-}
+++ /dev/null
-/* linux/arch/arm/plat-s5pc1xx/dev-uart.c
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * Based on plat-s3c64xx/dev-uart.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <plat/devs.h>
-
-/* Serial port registrations */
-
-/* 64xx uarts are closer together */
-
-static struct resource s5pc1xx_uart0_resource[] = {
- [0] = {
- .start = S3C_PA_UART0,
- .end = S3C_PA_UART0 + 0x100,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_S3CUART_RX0,
- .end = IRQ_S3CUART_RX0,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = IRQ_S3CUART_TX0,
- .end = IRQ_S3CUART_TX0,
- .flags = IORESOURCE_IRQ,
-
- },
- [3] = {
- .start = IRQ_S3CUART_ERR0,
- .end = IRQ_S3CUART_ERR0,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct resource s5pc1xx_uart1_resource[] = {
- [0] = {
- .start = S3C_PA_UART1,
- .end = S3C_PA_UART1 + 0x100,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_S3CUART_RX1,
- .end = IRQ_S3CUART_RX1,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = IRQ_S3CUART_TX1,
- .end = IRQ_S3CUART_TX1,
- .flags = IORESOURCE_IRQ,
-
- },
- [3] = {
- .start = IRQ_S3CUART_ERR1,
- .end = IRQ_S3CUART_ERR1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct resource s5pc1xx_uart2_resource[] = {
- [0] = {
- .start = S3C_PA_UART2,
- .end = S3C_PA_UART2 + 0x100,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_S3CUART_RX2,
- .end = IRQ_S3CUART_RX2,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = IRQ_S3CUART_TX2,
- .end = IRQ_S3CUART_TX2,
- .flags = IORESOURCE_IRQ,
-
- },
- [3] = {
- .start = IRQ_S3CUART_ERR2,
- .end = IRQ_S3CUART_ERR2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct resource s5pc1xx_uart3_resource[] = {
- [0] = {
- .start = S3C_PA_UART3,
- .end = S3C_PA_UART3 + 0x100,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_S3CUART_RX3,
- .end = IRQ_S3CUART_RX3,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = IRQ_S3CUART_TX3,
- .end = IRQ_S3CUART_TX3,
- .flags = IORESOURCE_IRQ,
-
- },
- [3] = {
- .start = IRQ_S3CUART_ERR3,
- .end = IRQ_S3CUART_ERR3,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-
-struct s3c24xx_uart_resources s5pc1xx_uart_resources[] __initdata = {
- [0] = {
- .resources = s5pc1xx_uart0_resource,
- .nr_resources = ARRAY_SIZE(s5pc1xx_uart0_resource),
- },
- [1] = {
- .resources = s5pc1xx_uart1_resource,
- .nr_resources = ARRAY_SIZE(s5pc1xx_uart1_resource),
- },
- [2] = {
- .resources = s5pc1xx_uart2_resource,
- .nr_resources = ARRAY_SIZE(s5pc1xx_uart2_resource),
- },
- [3] = {
- .resources = s5pc1xx_uart3_resource,
- .nr_resources = ARRAY_SIZE(s5pc1xx_uart3_resource),
- },
-};
+++ /dev/null
-/* linux/arch/arm/plat-s5pc1xx/include/plat/gpio-eint.h
- *
- * Copyright 2009 Samsung Electronics Co.
- *
- * External Interrupt (GPH0 ~ GPH3) control register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S5PC1XX_WKUP_INT_CON0_7 (S5PC1XX_EINT_BASE + 0x0)
-#define S5PC1XX_WKUP_INT_CON8_15 (S5PC1XX_EINT_BASE + 0x4)
-#define S5PC1XX_WKUP_INT_CON16_23 (S5PC1XX_EINT_BASE + 0x8)
-#define S5PC1XX_WKUP_INT_CON24_31 (S5PC1XX_EINT_BASE + 0xC)
-#define S5PC1XX_WKUP_INT_CON(x) (S5PC1XX_WKUP_INT_CON0_7 + (x * 0x4))
-
-#define S5PC1XX_WKUP_INT_FLTCON0_3 (S5PC1XX_EINT_BASE + 0x80)
-#define S5PC1XX_WKUP_INT_FLTCON4_7 (S5PC1XX_EINT_BASE + 0x84)
-#define S5PC1XX_WKUP_INT_FLTCON8_11 (S5PC1XX_EINT_BASE + 0x88)
-#define S5PC1XX_WKUP_INT_FLTCON12_15 (S5PC1XX_EINT_BASE + 0x8C)
-#define S5PC1XX_WKUP_INT_FLTCON16_19 (S5PC1XX_EINT_BASE + 0x90)
-#define S5PC1XX_WKUP_INT_FLTCON20_23 (S5PC1XX_EINT_BASE + 0x94)
-#define S5PC1XX_WKUP_INT_FLTCON24_27 (S5PC1XX_EINT_BASE + 0x98)
-#define S5PC1XX_WKUP_INT_FLTCON28_31 (S5PC1XX_EINT_BASE + 0x9C)
-#define S5PC1XX_WKUP_INT_FLTCON(x) (S5PC1XX_WKUP_INT_FLTCON0_3 + (x * 0x4))
-
-#define S5PC1XX_WKUP_INT_MASK0_7 (S5PC1XX_EINT_BASE + 0x100)
-#define S5PC1XX_WKUP_INT_MASK8_15 (S5PC1XX_EINT_BASE + 0x104)
-#define S5PC1XX_WKUP_INT_MASK16_23 (S5PC1XX_EINT_BASE + 0x108)
-#define S5PC1XX_WKUP_INT_MASK24_31 (S5PC1XX_EINT_BASE + 0x10C)
-#define S5PC1XX_WKUP_INT_MASK(x) (S5PC1XX_WKUP_INT_MASK0_7 + (x * 0x4))
-
-#define S5PC1XX_WKUP_INT_PEND0_7 (S5PC1XX_EINT_BASE + 0x140)
-#define S5PC1XX_WKUP_INT_PEND8_15 (S5PC1XX_EINT_BASE + 0x144)
-#define S5PC1XX_WKUP_INT_PEND16_23 (S5PC1XX_EINT_BASE + 0x148)
-#define S5PC1XX_WKUP_INT_PEND24_31 (S5PC1XX_EINT_BASE + 0x14C)
-#define S5PC1XX_WKUP_INT_PEND(x) (S5PC1XX_WKUP_INT_PEND0_7 + (x * 0x4))
-
-#define S5PC1XX_WKUP_INT_LOWLEV (0x00)
-#define S5PC1XX_WKUP_INT_HILEV (0x01)
-#define S5PC1XX_WKUP_INT_FALLEDGE (0x02)
-#define S5PC1XX_WKUP_INT_RISEEDGE (0x03)
-#define S5PC1XX_WKUP_INT_BOTHEDGE (0x04)
+++ /dev/null
-/* linux/arch/arm/plat-s5pc1xx/include/plat/irqs.h
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * S5PC1XX - Common IRQ support
- *
- * Based on plat-s3c64xx/include/plat/irqs.h
- */
-
-#ifndef __ASM_PLAT_S5PC1XX_IRQS_H
-#define __ASM_PLAT_S5PC1XX_IRQS_H __FILE__
-
-/* we keep the first set of CPU IRQs out of the range of
- * the ISA space, so that the PC104 has them to itself
- * and we don't end up having to do horrible things to the
- * standard ISA drivers....
- *
- * note, since we're using the VICs, our start must be a
- * mulitple of 32 to allow the common code to work
- */
-
-#define S3C_IRQ_OFFSET (32)
-
-#define S3C_IRQ(x) ((x) + S3C_IRQ_OFFSET)
-
-#define S3C_VIC0_BASE S3C_IRQ(0)
-#define S3C_VIC1_BASE S3C_IRQ(32)
-#define S3C_VIC2_BASE S3C_IRQ(64)
-
-/* UART interrupts, each UART has 4 intterupts per channel so
- * use the space between the ISA and S3C main interrupts. Note, these
- * are not in the same order as the S3C24XX series! */
-
-#define IRQ_S3CUART_BASE0 (16)
-#define IRQ_S3CUART_BASE1 (20)
-#define IRQ_S3CUART_BASE2 (24)
-#define IRQ_S3CUART_BASE3 (28)
-
-#define UART_IRQ_RXD (0)
-#define UART_IRQ_ERR (1)
-#define UART_IRQ_TXD (2)
-#define UART_IRQ_MODEM (3)
-
-#define IRQ_S3CUART_RX0 (IRQ_S3CUART_BASE0 + UART_IRQ_RXD)
-#define IRQ_S3CUART_TX0 (IRQ_S3CUART_BASE0 + UART_IRQ_TXD)
-#define IRQ_S3CUART_ERR0 (IRQ_S3CUART_BASE0 + UART_IRQ_ERR)
-
-#define IRQ_S3CUART_RX1 (IRQ_S3CUART_BASE1 + UART_IRQ_RXD)
-#define IRQ_S3CUART_TX1 (IRQ_S3CUART_BASE1 + UART_IRQ_TXD)
-#define IRQ_S3CUART_ERR1 (IRQ_S3CUART_BASE1 + UART_IRQ_ERR)
-
-#define IRQ_S3CUART_RX2 (IRQ_S3CUART_BASE2 + UART_IRQ_RXD)
-#define IRQ_S3CUART_TX2 (IRQ_S3CUART_BASE2 + UART_IRQ_TXD)
-#define IRQ_S3CUART_ERR2 (IRQ_S3CUART_BASE2 + UART_IRQ_ERR)
-
-#define IRQ_S3CUART_RX3 (IRQ_S3CUART_BASE3 + UART_IRQ_RXD)
-#define IRQ_S3CUART_TX3 (IRQ_S3CUART_BASE3 + UART_IRQ_TXD)
-#define IRQ_S3CUART_ERR3 (IRQ_S3CUART_BASE3 + UART_IRQ_ERR)
-
-/* VIC based IRQs */
-
-#define S5PC1XX_IRQ_VIC0(x) (S3C_VIC0_BASE + (x))
-#define S5PC1XX_IRQ_VIC1(x) (S3C_VIC1_BASE + (x))
-#define S5PC1XX_IRQ_VIC2(x) (S3C_VIC2_BASE + (x))
-
-/*
- * VIC0: system, DMA, timer
- */
-#define IRQ_EINT0 S5PC1XX_IRQ_VIC0(0)
-#define IRQ_EINT1 S5PC1XX_IRQ_VIC0(1)
-#define IRQ_EINT2 S5PC1XX_IRQ_VIC0(2)
-#define IRQ_EINT3 S5PC1XX_IRQ_VIC0(3)
-#define IRQ_EINT4 S5PC1XX_IRQ_VIC0(4)
-#define IRQ_EINT5 S5PC1XX_IRQ_VIC0(5)
-#define IRQ_EINT6 S5PC1XX_IRQ_VIC0(6)
-#define IRQ_EINT7 S5PC1XX_IRQ_VIC0(7)
-#define IRQ_EINT8 S5PC1XX_IRQ_VIC0(8)
-#define IRQ_EINT9 S5PC1XX_IRQ_VIC0(9)
-#define IRQ_EINT10 S5PC1XX_IRQ_VIC0(10)
-#define IRQ_EINT11 S5PC1XX_IRQ_VIC0(11)
-#define IRQ_EINT12 S5PC1XX_IRQ_VIC0(12)
-#define IRQ_EINT13 S5PC1XX_IRQ_VIC0(13)
-#define IRQ_EINT14 S5PC1XX_IRQ_VIC0(14)
-#define IRQ_EINT15 S5PC1XX_IRQ_VIC0(15)
-#define IRQ_EINT16_31 S5PC1XX_IRQ_VIC0(16)
-#define IRQ_BATF S5PC1XX_IRQ_VIC0(17)
-#define IRQ_MDMA S5PC1XX_IRQ_VIC0(18)
-#define IRQ_PDMA0 S5PC1XX_IRQ_VIC0(19)
-#define IRQ_PDMA1 S5PC1XX_IRQ_VIC0(20)
-#define IRQ_TIMER0_VIC S5PC1XX_IRQ_VIC0(21)
-#define IRQ_TIMER1_VIC S5PC1XX_IRQ_VIC0(22)
-#define IRQ_TIMER2_VIC S5PC1XX_IRQ_VIC0(23)
-#define IRQ_TIMER3_VIC S5PC1XX_IRQ_VIC0(24)
-#define IRQ_TIMER4_VIC S5PC1XX_IRQ_VIC0(25)
-#define IRQ_SYSTIMER S5PC1XX_IRQ_VIC0(26)
-#define IRQ_WDT S5PC1XX_IRQ_VIC0(27)
-#define IRQ_RTC_ALARM S5PC1XX_IRQ_VIC0(28)
-#define IRQ_RTC_TIC S5PC1XX_IRQ_VIC0(29)
-#define IRQ_GPIOINT S5PC1XX_IRQ_VIC0(30)
-
-/*
- * VIC1: ARM, power, memory, connectivity
- */
-#define IRQ_CORTEX0 S5PC1XX_IRQ_VIC1(0)
-#define IRQ_CORTEX1 S5PC1XX_IRQ_VIC1(1)
-#define IRQ_CORTEX2 S5PC1XX_IRQ_VIC1(2)
-#define IRQ_CORTEX3 S5PC1XX_IRQ_VIC1(3)
-#define IRQ_CORTEX4 S5PC1XX_IRQ_VIC1(4)
-#define IRQ_IEMAPC S5PC1XX_IRQ_VIC1(5)
-#define IRQ_IEMIEC S5PC1XX_IRQ_VIC1(6)
-#define IRQ_ONENAND S5PC1XX_IRQ_VIC1(7)
-#define IRQ_NFC S5PC1XX_IRQ_VIC1(8)
-#define IRQ_CFC S5PC1XX_IRQ_VIC1(9)
-#define IRQ_UART0 S5PC1XX_IRQ_VIC1(10)
-#define IRQ_UART1 S5PC1XX_IRQ_VIC1(11)
-#define IRQ_UART2 S5PC1XX_IRQ_VIC1(12)
-#define IRQ_UART3 S5PC1XX_IRQ_VIC1(13)
-#define IRQ_IIC S5PC1XX_IRQ_VIC1(14)
-#define IRQ_SPI0 S5PC1XX_IRQ_VIC1(15)
-#define IRQ_SPI1 S5PC1XX_IRQ_VIC1(16)
-#define IRQ_SPI2 S5PC1XX_IRQ_VIC1(17)
-#define IRQ_IRDA S5PC1XX_IRQ_VIC1(18)
-#define IRQ_CAN0 S5PC1XX_IRQ_VIC1(19)
-#define IRQ_CAN1 S5PC1XX_IRQ_VIC1(20)
-#define IRQ_HSIRX S5PC1XX_IRQ_VIC1(21)
-#define IRQ_HSITX S5PC1XX_IRQ_VIC1(22)
-#define IRQ_UHOST S5PC1XX_IRQ_VIC1(23)
-#define IRQ_OTG S5PC1XX_IRQ_VIC1(24)
-#define IRQ_MSM S5PC1XX_IRQ_VIC1(25)
-#define IRQ_HSMMC0 S5PC1XX_IRQ_VIC1(26)
-#define IRQ_HSMMC1 S5PC1XX_IRQ_VIC1(27)
-#define IRQ_HSMMC2 S5PC1XX_IRQ_VIC1(28)
-#define IRQ_MIPICSI S5PC1XX_IRQ_VIC1(29)
-#define IRQ_MIPIDSI S5PC1XX_IRQ_VIC1(30)
-
-/*
- * VIC2: multimedia, audio, security
- */
-#define IRQ_LCD0 S5PC1XX_IRQ_VIC2(0)
-#define IRQ_LCD1 S5PC1XX_IRQ_VIC2(1)
-#define IRQ_LCD2 S5PC1XX_IRQ_VIC2(2)
-#define IRQ_LCD3 S5PC1XX_IRQ_VIC2(3)
-#define IRQ_ROTATOR S5PC1XX_IRQ_VIC2(4)
-#define IRQ_FIMC0 S5PC1XX_IRQ_VIC2(5)
-#define IRQ_FIMC1 S5PC1XX_IRQ_VIC2(6)
-#define IRQ_FIMC2 S5PC1XX_IRQ_VIC2(7)
-#define IRQ_JPEG S5PC1XX_IRQ_VIC2(8)
-#define IRQ_2D S5PC1XX_IRQ_VIC2(9)
-#define IRQ_3D S5PC1XX_IRQ_VIC2(10)
-#define IRQ_MIXER S5PC1XX_IRQ_VIC2(11)
-#define IRQ_HDMI S5PC1XX_IRQ_VIC2(12)
-#define IRQ_IIC1 S5PC1XX_IRQ_VIC2(13)
-#define IRQ_MFC S5PC1XX_IRQ_VIC2(14)
-#define IRQ_TVENC S5PC1XX_IRQ_VIC2(15)
-#define IRQ_I2S0 S5PC1XX_IRQ_VIC2(16)
-#define IRQ_I2S1 S5PC1XX_IRQ_VIC2(17)
-#define IRQ_I2S2 S5PC1XX_IRQ_VIC2(18)
-#define IRQ_AC97 S5PC1XX_IRQ_VIC2(19)
-#define IRQ_PCM0 S5PC1XX_IRQ_VIC2(20)
-#define IRQ_PCM1 S5PC1XX_IRQ_VIC2(21)
-#define IRQ_SPDIF S5PC1XX_IRQ_VIC2(22)
-#define IRQ_ADC S5PC1XX_IRQ_VIC2(23)
-#define IRQ_PENDN S5PC1XX_IRQ_VIC2(24)
-#define IRQ_TC IRQ_PENDN
-#define IRQ_KEYPAD S5PC1XX_IRQ_VIC2(25)
-#define IRQ_CG S5PC1XX_IRQ_VIC2(26)
-#define IRQ_SEC S5PC1XX_IRQ_VIC2(27)
-#define IRQ_SECRX S5PC1XX_IRQ_VIC2(28)
-#define IRQ_SECTX S5PC1XX_IRQ_VIC2(29)
-#define IRQ_SDMIRQ S5PC1XX_IRQ_VIC2(30)
-#define IRQ_SDMFIQ S5PC1XX_IRQ_VIC2(31)
-
-#define IRQ_TIMER(x) (IRQ_SDMFIQ + 1 + (x))
-#define IRQ_TIMER0 IRQ_TIMER(0)
-#define IRQ_TIMER1 IRQ_TIMER(1)
-#define IRQ_TIMER2 IRQ_TIMER(2)
-#define IRQ_TIMER3 IRQ_TIMER(3)
-#define IRQ_TIMER4 IRQ_TIMER(4)
-
-/* External interrupt */
-#define S3C_IRQ_EINT_BASE (IRQ_SDMFIQ + 6)
-
-#define S3C_EINT(x) (S3C_IRQ_EINT_BASE + (x - 16))
-#define IRQ_EINT(x) (x < 16 ? IRQ_EINT0 + x : S3C_EINT(x))
-#define IRQ_EINT_BIT(x) (x < IRQ_EINT16_31 ? x - IRQ_EINT0 : x - S3C_EINT(0))
-
-/* GPIO interrupt */
-#define S3C_IRQ_GPIO_BASE (IRQ_EINT(31) + 1)
-#define S3C_IRQ_GPIO(x) (S3C_IRQ_GPIO_BASE + (x))
-
-/*
- * Until MP04 Groups -> 40 (exactly 39) Groups * 8 ~= 320 GPIOs
- */
-#define NR_IRQS (S3C_IRQ_GPIO(320) + 1)
-
-#endif /* __ASM_PLAT_S5PC1XX_IRQS_H */
-
+++ /dev/null
-/* arch/arm/plat-s5pc1xx/include/plat/pll.h
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * S5PC1XX PLL code
- *
- * Based on plat-s3c64xx/include/plat/pll.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S5P_PLL_MDIV_MASK ((1 << (25-16+1)) - 1)
-#define S5P_PLL_PDIV_MASK ((1 << (13-8+1)) - 1)
-#define S5P_PLL_SDIV_MASK ((1 << (2-0+1)) - 1)
-#define S5P_PLL_MDIV_SHIFT (16)
-#define S5P_PLL_PDIV_SHIFT (8)
-#define S5P_PLL_SDIV_SHIFT (0)
-
-#include <asm/div64.h>
-
-static inline unsigned long s5pc1xx_get_pll(unsigned long baseclk,
- u32 pllcon)
-{
- u32 mdiv, pdiv, sdiv;
- u64 fvco = baseclk;
-
- mdiv = (pllcon >> S5P_PLL_MDIV_SHIFT) & S5P_PLL_MDIV_MASK;
- pdiv = (pllcon >> S5P_PLL_PDIV_SHIFT) & S5P_PLL_PDIV_MASK;
- sdiv = (pllcon >> S5P_PLL_SDIV_SHIFT) & S5P_PLL_SDIV_MASK;
-
- fvco *= mdiv;
- do_div(fvco, (pdiv << sdiv));
-
- return (unsigned long)fvco;
-}
+++ /dev/null
-/* arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * S5PC1XX clock register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_REGS_CLOCK_H
-#define __PLAT_REGS_CLOCK_H __FILE__
-
-#define S5PC100_CLKREG(x) (S5PC1XX_VA_CLK + (x))
-#define S5PC100_CLKREG_OTHER(x) (S5PC1XX_VA_CLK_OTHER + (x))
-
-/* s5pc100 register for clock */
-#define S5PC100_APLL_LOCK S5PC100_CLKREG(0x00)
-#define S5PC100_MPLL_LOCK S5PC100_CLKREG(0x04)
-#define S5PC100_EPLL_LOCK S5PC100_CLKREG(0x08)
-#define S5PC100_HPLL_LOCK S5PC100_CLKREG(0x0C)
-
-#define S5PC100_APLL_CON S5PC100_CLKREG(0x100)
-#define S5PC100_MPLL_CON S5PC100_CLKREG(0x104)
-#define S5PC100_EPLL_CON S5PC100_CLKREG(0x108)
-#define S5PC100_HPLL_CON S5PC100_CLKREG(0x10C)
-
-#define S5PC100_CLKSRC0 S5PC100_CLKREG(0x200)
-#define S5PC100_CLKSRC1 S5PC100_CLKREG(0x204)
-#define S5PC100_CLKSRC2 S5PC100_CLKREG(0x208)
-#define S5PC100_CLKSRC3 S5PC100_CLKREG(0x20C)
-
-#define S5PC100_CLKDIV0 S5PC100_CLKREG(0x300)
-#define S5PC100_CLKDIV1 S5PC100_CLKREG(0x304)
-#define S5PC100_CLKDIV2 S5PC100_CLKREG(0x308)
-#define S5PC100_CLKDIV3 S5PC100_CLKREG(0x30C)
-#define S5PC100_CLKDIV4 S5PC100_CLKREG(0x310)
-
-#define S5PC100_CLK_OUT S5PC100_CLKREG(0x400)
-
-#define S5PC100_CLKGATE_D00 S5PC100_CLKREG(0x500)
-#define S5PC100_CLKGATE_D01 S5PC100_CLKREG(0x504)
-#define S5PC100_CLKGATE_D02 S5PC100_CLKREG(0x508)
-
-#define S5PC100_CLKGATE_D10 S5PC100_CLKREG(0x520)
-#define S5PC100_CLKGATE_D11 S5PC100_CLKREG(0x524)
-#define S5PC100_CLKGATE_D12 S5PC100_CLKREG(0x528)
-#define S5PC100_CLKGATE_D13 S5PC100_CLKREG(0x52C)
-#define S5PC100_CLKGATE_D14 S5PC100_CLKREG(0x530)
-#define S5PC100_CLKGATE_D15 S5PC100_CLKREG(0x534)
-
-#define S5PC100_CLKGATE_D20 S5PC100_CLKREG(0x540)
-
-#define S5PC100_SCLKGATE0 S5PC100_CLKREG(0x560)
-#define S5PC100_SCLKGATE1 S5PC100_CLKREG(0x564)
-
-/* EPLL_CON */
-#define S5PC100_EPLL_EN (1<<31)
-#define S5PC100_EPLL_MASK 0xffffffff
-#define S5PC100_EPLLVAL(_m, _p, _s) ((_m) << 16 | ((_p) << 8) | ((_s)))
-
-/* CLKSRC0..CLKSRC3 -> mostly removed due to clksrc updates */
-#define S5PC100_CLKSRC1_CLK48M_MASK (0x1<<24)
-#define S5PC100_CLKSRC1_CLK48M_SHIFT (24)
-
-/* CLKDIV0 */
-#define S5PC100_CLKDIV0_APLL_MASK (0x1<<0)
-#define S5PC100_CLKDIV0_APLL_SHIFT (0)
-#define S5PC100_CLKDIV0_ARM_MASK (0x7<<4)
-#define S5PC100_CLKDIV0_ARM_SHIFT (4)
-#define S5PC100_CLKDIV0_D0_MASK (0x7<<8)
-#define S5PC100_CLKDIV0_D0_SHIFT (8)
-#define S5PC100_CLKDIV0_PCLKD0_MASK (0x7<<12)
-#define S5PC100_CLKDIV0_PCLKD0_SHIFT (12)
-#define S5PC100_CLKDIV0_SECSS_MASK (0x7<<16)
-#define S5PC100_CLKDIV0_SECSS_SHIFT (16)
-
-/* CLKDIV1 (OneNAND clock only used in one place, removed) */
-#define S5PC100_CLKDIV1_APLL2_MASK (0x7<<0)
-#define S5PC100_CLKDIV1_APLL2_SHIFT (0)
-#define S5PC100_CLKDIV1_MPLL_MASK (0x3<<4)
-#define S5PC100_CLKDIV1_MPLL_SHIFT (4)
-#define S5PC100_CLKDIV1_MPLL2_MASK (0x1<<8)
-#define S5PC100_CLKDIV1_MPLL2_SHIFT (8)
-#define S5PC100_CLKDIV1_D1_MASK (0x7<<12)
-#define S5PC100_CLKDIV1_D1_SHIFT (12)
-#define S5PC100_CLKDIV1_PCLKD1_MASK (0x7<<16)
-#define S5PC100_CLKDIV1_PCLKD1_SHIFT (16)
-#define S5PC100_CLKDIV1_CAM_MASK (0x1F<<24)
-#define S5PC100_CLKDIV1_CAM_SHIFT (24)
-
-/* CLKDIV2 => removed in clksrc update */
-/* CLKDIV3 => removed in clksrc update, or not needed */
-/* CLKDIV4 => removed in clksrc update, or not needed */
-
-/* HCLKD0/PCLKD0 Clock Gate 0 Registers */
-#define S5PC100_CLKGATE_D00_INTC (1<<0)
-#define S5PC100_CLKGATE_D00_TZIC (1<<1)
-#define S5PC100_CLKGATE_D00_CFCON (1<<2)
-#define S5PC100_CLKGATE_D00_MDMA (1<<3)
-#define S5PC100_CLKGATE_D00_G2D (1<<4)
-#define S5PC100_CLKGATE_D00_SECSS (1<<5)
-#define S5PC100_CLKGATE_D00_CSSYS (1<<6)
-
-/* HCLKD0/PCLKD0 Clock Gate 1 Registers */
-#define S5PC100_CLKGATE_D01_DMC (1<<0)
-#define S5PC100_CLKGATE_D01_SROMC (1<<1)
-#define S5PC100_CLKGATE_D01_ONENAND (1<<2)
-#define S5PC100_CLKGATE_D01_NFCON (1<<3)
-#define S5PC100_CLKGATE_D01_INTMEM (1<<4)
-#define S5PC100_CLKGATE_D01_EBI (1<<5)
-
-/* PCLKD0 Clock Gate 2 Registers */
-#define S5PC100_CLKGATE_D02_SECKEY (1<<1)
-#define S5PC100_CLKGATE_D02_SDM (1<<2)
-
-/* HCLKD1/PCLKD1 Clock Gate 0 Registers */
-#define S5PC100_CLKGATE_D10_PDMA0 (1<<0)
-#define S5PC100_CLKGATE_D10_PDMA1 (1<<1)
-#define S5PC100_CLKGATE_D10_USBHOST (1<<2)
-#define S5PC100_CLKGATE_D10_USBOTG (1<<3)
-#define S5PC100_CLKGATE_D10_MODEMIF (1<<4)
-#define S5PC100_CLKGATE_D10_HSMMC0 (1<<5)
-#define S5PC100_CLKGATE_D10_HSMMC1 (1<<6)
-#define S5PC100_CLKGATE_D10_HSMMC2 (1<<7)
-
-/* HCLKD1/PCLKD1 Clock Gate 1 Registers */
-#define S5PC100_CLKGATE_D11_LCD (1<<0)
-#define S5PC100_CLKGATE_D11_ROTATOR (1<<1)
-#define S5PC100_CLKGATE_D11_FIMC0 (1<<2)
-#define S5PC100_CLKGATE_D11_FIMC1 (1<<3)
-#define S5PC100_CLKGATE_D11_FIMC2 (1<<4)
-#define S5PC100_CLKGATE_D11_JPEG (1<<5)
-#define S5PC100_CLKGATE_D11_DSI (1<<6)
-#define S5PC100_CLKGATE_D11_CSI (1<<7)
-#define S5PC100_CLKGATE_D11_G3D (1<<8)
-
-/* HCLKD1/PCLKD1 Clock Gate 2 Registers */
-#define S5PC100_CLKGATE_D12_TV (1<<0)
-#define S5PC100_CLKGATE_D12_VP (1<<1)
-#define S5PC100_CLKGATE_D12_MIXER (1<<2)
-#define S5PC100_CLKGATE_D12_HDMI (1<<3)
-#define S5PC100_CLKGATE_D12_MFC (1<<4)
-
-/* HCLKD1/PCLKD1 Clock Gate 3 Registers */
-#define S5PC100_CLKGATE_D13_CHIPID (1<<0)
-#define S5PC100_CLKGATE_D13_GPIO (1<<1)
-#define S5PC100_CLKGATE_D13_APC (1<<2)
-#define S5PC100_CLKGATE_D13_IEC (1<<3)
-#define S5PC100_CLKGATE_D13_PWM (1<<6)
-#define S5PC100_CLKGATE_D13_SYSTIMER (1<<7)
-#define S5PC100_CLKGATE_D13_WDT (1<<8)
-#define S5PC100_CLKGATE_D13_RTC (1<<9)
-
-/* HCLKD1/PCLKD1 Clock Gate 4 Registers */
-#define S5PC100_CLKGATE_D14_UART0 (1<<0)
-#define S5PC100_CLKGATE_D14_UART1 (1<<1)
-#define S5PC100_CLKGATE_D14_UART2 (1<<2)
-#define S5PC100_CLKGATE_D14_UART3 (1<<3)
-#define S5PC100_CLKGATE_D14_IIC (1<<4)
-#define S5PC100_CLKGATE_D14_HDMI_IIC (1<<5)
-#define S5PC100_CLKGATE_D14_SPI0 (1<<6)
-#define S5PC100_CLKGATE_D14_SPI1 (1<<7)
-#define S5PC100_CLKGATE_D14_SPI2 (1<<8)
-#define S5PC100_CLKGATE_D14_IRDA (1<<9)
-#define S5PC100_CLKGATE_D14_CCAN0 (1<<10)
-#define S5PC100_CLKGATE_D14_CCAN1 (1<<11)
-#define S5PC100_CLKGATE_D14_HSITX (1<<12)
-#define S5PC100_CLKGATE_D14_HSIRX (1<<13)
-
-/* HCLKD1/PCLKD1 Clock Gate 5 Registers */
-#define S5PC100_CLKGATE_D15_IIS0 (1<<0)
-#define S5PC100_CLKGATE_D15_IIS1 (1<<1)
-#define S5PC100_CLKGATE_D15_IIS2 (1<<2)
-#define S5PC100_CLKGATE_D15_AC97 (1<<3)
-#define S5PC100_CLKGATE_D15_PCM0 (1<<4)
-#define S5PC100_CLKGATE_D15_PCM1 (1<<5)
-#define S5PC100_CLKGATE_D15_SPDIF (1<<6)
-#define S5PC100_CLKGATE_D15_TSADC (1<<7)
-#define S5PC100_CLKGATE_D15_KEYIF (1<<8)
-#define S5PC100_CLKGATE_D15_CG (1<<9)
-
-/* HCLKD2 Clock Gate 0 Registers */
-#define S5PC100_CLKGATE_D20_HCLKD2 (1<<0)
-#define S5PC100_CLKGATE_D20_I2SD2 (1<<1)
-
-/* Special Clock Gate 0 Registers */
-#define S5PC100_CLKGATE_SCLK0_HPM (1<<0)
-#define S5PC100_CLKGATE_SCLK0_PWI (1<<1)
-#define S5PC100_CLKGATE_SCLK0_ONENAND (1<<2)
-#define S5PC100_CLKGATE_SCLK0_UART (1<<3)
-#define S5PC100_CLKGATE_SCLK0_SPI0 (1<<4)
-#define S5PC100_CLKGATE_SCLK0_SPI1 (1<<5)
-#define S5PC100_CLKGATE_SCLK0_SPI2 (1<<6)
-#define S5PC100_CLKGATE_SCLK0_SPI0_48 (1<<7)
-#define S5PC100_CLKGATE_SCLK0_SPI1_48 (1<<8)
-#define S5PC100_CLKGATE_SCLK0_SPI2_48 (1<<9)
-#define S5PC100_CLKGATE_SCLK0_IRDA (1<<10)
-#define S5PC100_CLKGATE_SCLK0_USBHOST (1<<11)
-#define S5PC100_CLKGATE_SCLK0_MMC0 (1<<12)
-#define S5PC100_CLKGATE_SCLK0_MMC1 (1<<13)
-#define S5PC100_CLKGATE_SCLK0_MMC2 (1<<14)
-#define S5PC100_CLKGATE_SCLK0_MMC0_48 (1<<15)
-#define S5PC100_CLKGATE_SCLK0_MMC1_48 (1<<16)
-#define S5PC100_CLKGATE_SCLK0_MMC2_48 (1<<17)
-
-/* Special Clock Gate 1 Registers */
-#define S5PC100_CLKGATE_SCLK1_LCD (1<<0)
-#define S5PC100_CLKGATE_SCLK1_FIMC0 (1<<1)
-#define S5PC100_CLKGATE_SCLK1_FIMC1 (1<<2)
-#define S5PC100_CLKGATE_SCLK1_FIMC2 (1<<3)
-#define S5PC100_CLKGATE_SCLK1_TV54 (1<<4)
-#define S5PC100_CLKGATE_SCLK1_VDAC54 (1<<5)
-#define S5PC100_CLKGATE_SCLK1_MIXER (1<<6)
-#define S5PC100_CLKGATE_SCLK1_HDMI (1<<7)
-#define S5PC100_CLKGATE_SCLK1_AUDIO0 (1<<8)
-#define S5PC100_CLKGATE_SCLK1_AUDIO1 (1<<9)
-#define S5PC100_CLKGATE_SCLK1_AUDIO2 (1<<10)
-#define S5PC100_CLKGATE_SCLK1_SPDIF (1<<11)
-#define S5PC100_CLKGATE_SCLK1_CAM (1<<12)
-
-#define S5PC100_SWRESET S5PC100_CLKREG_OTHER(0x000)
-#define S5PC100_OND_SWRESET S5PC100_CLKREG_OTHER(0x008)
-#define S5PC100_GEN_CTRL S5PC100_CLKREG_OTHER(0x100)
-#define S5PC100_GEN_STATUS S5PC100_CLKREG_OTHER(0x104)
-#define S5PC100_MEM_SYS_CFG S5PC100_CLKREG_OTHER(0x200)
-#define S5PC100_CAM_MUX_SEL S5PC100_CLKREG_OTHER(0x300)
-#define S5PC100_MIXER_OUT_SEL S5PC100_CLKREG_OTHER(0x304)
-#define S5PC100_LPMP_MODE_SEL S5PC100_CLKREG_OTHER(0x308)
-#define S5PC100_MIPI_PHY_CON0 S5PC100_CLKREG_OTHER(0x400)
-#define S5PC100_MIPI_PHY_CON1 S5PC100_CLKREG_OTHER(0x414)
-#define S5PC100_HDMI_PHY_CON0 S5PC100_CLKREG_OTHER(0x420)
-
-#define S5PC100_SWRESET_RESETVAL 0xc100
-#define S5PC100_OTHER_SYS_INT 24
-#define S5PC100_OTHER_STA_TYPE 23
-#define STA_TYPE_EXPON 0
-#define STA_TYPE_SFR 1
-
-#define S5PC100_SLEEP_CFG_OSC_EN 0
-
-/* OTHERS Resgister */
-#define S5PC100_OTHERS_USB_SIG_MASK (1 << 16)
-#define S5PC100_OTHERS_MIPI_DPHY_EN (1 << 28)
-
-/* MIPI D-PHY Control Register 0 */
-#define S5PC100_MIPI_PHY_CON0_M_RESETN (1 << 1)
-#define S5PC100_MIPI_PHY_CON0_S_RESETN (1 << 0)
-
-#endif /* _PLAT_REGS_CLOCK_H */
+++ /dev/null
-/* arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
- *
- * Copyright 2009 Samsung Electronics Co.
- * Jongse Won <jongse.won@samsung.com>
- *
- * S5PC1XX clock register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARM_REGS_PWR
-#define __ASM_ARM_REGS_PWR __FILE__
-
-#define S5PC1XX_PWRREG(x) (S5PC1XX_VA_PWR + (x))
-
-/* s5pc100 (0xE0108000) register for power management */
-#define S5PC100_PWR_CFG S5PC1XX_PWRREG(0x0)
-#define S5PC100_EINT_WAKEUP_MASK S5PC1XX_PWRREG(0x4)
-#define S5PC100_NORMAL_CFG S5PC1XX_PWRREG(0x10)
-#define S5PC100_STOP_CFG S5PC1XX_PWRREG(0x14)
-#define S5PC100_SLEEP_CFG S5PC1XX_PWRREG(0x18)
-#define S5PC100_STOP_MEM_CFG S5PC1XX_PWRREG(0x1C)
-#define S5PC100_OSC_FREQ S5PC1XX_PWRREG(0x100)
-#define S5PC100_OSC_STABLE S5PC1XX_PWRREG(0x104)
-#define S5PC100_PWR_STABLE S5PC1XX_PWRREG(0x108)
-#define S5PC100_MTC_STABLE S5PC1XX_PWRREG(0x110)
-#define S5PC100_CLAMP_STABLE S5PC1XX_PWRREG(0x114)
-#define S5PC100_OTHERS S5PC1XX_PWRREG(0x200)
-#define S5PC100_RST_STAT S5PC1XX_PWRREG(0x300)
-#define S5PC100_WAKEUP_STAT S5PC1XX_PWRREG(0x304)
-#define S5PC100_BLK_PWR_STAT S5PC1XX_PWRREG(0x308)
-#define S5PC100_INFORM0 S5PC1XX_PWRREG(0x400)
-#define S5PC100_INFORM1 S5PC1XX_PWRREG(0x404)
-#define S5PC100_INFORM2 S5PC1XX_PWRREG(0x408)
-#define S5PC100_INFORM3 S5PC1XX_PWRREG(0x40C)
-#define S5PC100_INFORM4 S5PC1XX_PWRREG(0x410)
-#define S5PC100_INFORM5 S5PC1XX_PWRREG(0x414)
-#define S5PC100_INFORM6 S5PC1XX_PWRREG(0x418)
-#define S5PC100_INFORM7 S5PC1XX_PWRREG(0x41C)
-#define S5PC100_DCGIDX_MAP0 S5PC1XX_PWRREG(0x500)
-#define S5PC100_DCGIDX_MAP1 S5PC1XX_PWRREG(0x504)
-#define S5PC100_DCGIDX_MAP2 S5PC1XX_PWRREG(0x508)
-#define S5PC100_DCGPERF_MAP0 S5PC1XX_PWRREG(0x50C)
-#define S5PC100_DCGPERF_MAP1 S5PC1XX_PWRREG(0x510)
-#define S5PC100_DVCIDX_MAP S5PC1XX_PWRREG(0x514)
-#define S5PC100_FREQ_CPU S5PC1XX_PWRREG(0x518)
-#define S5PC100_FREQ_DPM S5PC1XX_PWRREG(0x51C)
-#define S5PC100_DVSEMCLK_EN S5PC1XX_PWRREG(0x520)
-#define S5PC100_APLL_CON_L8 S5PC1XX_PWRREG(0x600)
-#define S5PC100_APLL_CON_L7 S5PC1XX_PWRREG(0x604)
-#define S5PC100_APLL_CON_L6 S5PC1XX_PWRREG(0x608)
-#define S5PC100_APLL_CON_L5 S5PC1XX_PWRREG(0x60C)
-#define S5PC100_APLL_CON_L4 S5PC1XX_PWRREG(0x610)
-#define S5PC100_APLL_CON_L3 S5PC1XX_PWRREG(0x614)
-#define S5PC100_APLL_CON_L2 S5PC1XX_PWRREG(0x618)
-#define S5PC100_APLL_CON_L1 S5PC1XX_PWRREG(0x61C)
-#define S5PC100_IEM_CONTROL S5PC1XX_PWRREG(0x620)
-#define S5PC100_CLKDIV_IEM_L8 S5PC1XX_PWRREG(0x700)
-#define S5PC100_CLKDIV_IEM_L7 S5PC1XX_PWRREG(0x704)
-#define S5PC100_CLKDIV_IEM_L6 S5PC1XX_PWRREG(0x708)
-#define S5PC100_CLKDIV_IEM_L5 S5PC1XX_PWRREG(0x70C)
-#define S5PC100_CLKDIV_IEM_L4 S5PC1XX_PWRREG(0x710)
-#define S5PC100_CLKDIV_IEM_L3 S5PC1XX_PWRREG(0x714)
-#define S5PC100_CLKDIV_IEM_L2 S5PC1XX_PWRREG(0x718)
-#define S5PC100_CLKDIV_IEM_L1 S5PC1XX_PWRREG(0x71C)
-#define S5PC100_IEM_HPMCLK_DIV S5PC1XX_PWRREG(0x724)
-
-/* PWR_CFG */
-#define S5PC100_PWRCFG_CFG_DEEP_IDLE (1 << 31)
-#define S5PC100_PWRCFG_CFG_WFI_MASK (3 << 5)
-#define S5PC100_PWRCFG_CFG_WFI_IDLE (0 << 5)
-#define S5PC100_PWRCFG_CFG_WFI_DEEP_IDLE (1 << 5)
-#define S5PC100_PWRCFG_CFG_WFI_STOP (2 << 5)
-#define S5PC100_PWRCFG_CFG_WFI_SLEEP (3 << 5)
-
-/* SLEEP_CFG */
-#define S5PC100_SLEEP_OSC_EN_SLEEP (1 << 0)
-
-/* OTHERS */
-#define S5PC100_PMU_INT_DISABLE (1 << 24)
-
-#endif /* __ASM_ARM_REGS_PWR */
+++ /dev/null
-/* arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * Header file for s5pc100 cpu support
- *
- * Based on plat-s3c64xx/include/plat/s3c6400.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* Common init code for S5PC100 related SoCs */
-extern int s5pc100_init(void);
-extern void s5pc100_map_io(void);
-extern void s5pc100_init_clocks(int xtal);
-extern int s5pc100_register_baseclocks(unsigned long xtal);
-extern void s5pc100_init_irq(void);
-extern void s5pc100_init_io(struct map_desc *mach_desc, int size);
-extern void s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s5pc100_register_clocks(void);
-extern void s5pc100_setup_clocks(void);
-extern struct sysdev_class s5pc100_sysclass;
-
-#define s5pc100_init_uarts s5pc100_common_init_uarts
-
-/* Some day, belows will be moved to plat-s5pc/include/plat/cpu.h */
-extern void s5pc1xx_init_irq(u32 *vic_valid, int num);
-extern void s5pc1xx_init_io(struct map_desc *mach_desc, int size);
-
-/* Some day, belows will be moved to plat-s5pc/include/plat/clock.h */
-extern struct clk clk_hpll;
-extern struct clk clk_hd0;
-extern struct clk clk_pd0;
-extern struct clk clk_54m;
-extern void s5pc1xx_register_clocks(void);
-extern int s5pc100_sclk0_ctrl(struct clk *clk, int enable);
-extern int s5pc100_sclk1_ctrl(struct clk *clk, int enable);
-
-/* Some day, belows will be moved to plat-s5pc/include/plat/devs.h */
-extern struct s3c24xx_uart_resources s5pc1xx_uart_resources[];
-extern struct platform_device s3c_device_g2d;
-extern struct platform_device s3c_device_g3d;
-extern struct platform_device s3c_device_vpp;
-extern struct platform_device s3c_device_tvenc;
-extern struct platform_device s3c_device_tvscaler;
-extern struct platform_device s3c_device_rotator;
-extern struct platform_device s3c_device_jpeg;
-extern struct platform_device s3c_device_onenand;
-extern struct platform_device s3c_device_usb_otghcd;
-extern struct platform_device s3c_device_keypad;
-extern struct platform_device s3c_device_ts;
-extern struct platform_device s3c_device_g3d;
-extern struct platform_device s3c_device_smc911x;
-extern struct platform_device s3c_device_fimc0;
-extern struct platform_device s3c_device_fimc1;
-extern struct platform_device s3c_device_mfc;
-extern struct platform_device s3c_device_ac97;
-extern struct platform_device s3c_device_fimc0;
-extern struct platform_device s3c_device_fimc1;
-extern struct platform_device s3c_device_fimc2;
-
+++ /dev/null
-/*
- * linux/arch/arm/plat-s5pc1xx/irq-eint.c
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- * Kyungin Park <kyungmin.park@samsung.com>
- *
- * Based on plat-s3c64xx/irq-eint.c
- *
- * S5PC1XX - Interrupt handling for IRQ_EINT(x)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/sysdev.h>
-#include <linux/pm.h>
-#include <linux/gpio.h>
-
-#include <asm/hardware/vic.h>
-
-#include <mach/map.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-ext.h>
-#include <plat/pm.h>
-#include <plat/regs-gpio.h>
-#include <plat/regs-irqtype.h>
-
-/*
- * bank is a group of external interrupt
- * bank0 means EINT0 ... EINT7
- * bank1 means EINT8 ... EINT15
- * bank2 means EINT16 ... EINT23
- * bank3 means EINT24 ... EINT31
- */
-
-static inline int s3c_get_eint(unsigned int irq)
-{
- int real;
-
- if (irq < IRQ_EINT16_31)
- real = (irq - IRQ_EINT0);
- else
- real = (irq - S3C_IRQ_EINT_BASE) + IRQ_EINT16_31 - IRQ_EINT0;
-
- return real;
-}
-
-static inline int s3c_get_bank(unsigned int irq)
-{
- return s3c_get_eint(irq) >> 3;
-}
-
-static inline int s3c_eint_to_bit(unsigned int irq)
-{
- int real, bit;
-
- real = s3c_get_eint(irq);
- bit = 1 << (real & (8 - 1));
-
- return bit;
-}
-
-static inline void s3c_irq_eint_mask(unsigned int irq)
-{
- u32 mask;
- u32 bank = s3c_get_bank(irq);
-
- mask = __raw_readl(S5PC1XX_WKUP_INT_MASK(bank));
- mask |= s3c_eint_to_bit(irq);
- __raw_writel(mask, S5PC1XX_WKUP_INT_MASK(bank));
-}
-
-static void s3c_irq_eint_unmask(unsigned int irq)
-{
- u32 mask;
- u32 bank = s3c_get_bank(irq);
-
- mask = __raw_readl(S5PC1XX_WKUP_INT_MASK(bank));
- mask &= ~(s3c_eint_to_bit(irq));
- __raw_writel(mask, S5PC1XX_WKUP_INT_MASK(bank));
-}
-
-static inline void s3c_irq_eint_ack(unsigned int irq)
-{
- u32 bank = s3c_get_bank(irq);
-
- __raw_writel(s3c_eint_to_bit(irq), S5PC1XX_WKUP_INT_PEND(bank));
-}
-
-static void s3c_irq_eint_maskack(unsigned int irq)
-{
- /* compiler should in-line these */
- s3c_irq_eint_mask(irq);
- s3c_irq_eint_ack(irq);
-}
-
-static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type)
-{
- u32 bank = s3c_get_bank(irq);
- int real = s3c_get_eint(irq);
- int gpio, shift, sfn;
- u32 ctrl, con = 0;
-
- switch (type) {
- case IRQ_TYPE_NONE:
- printk(KERN_WARNING "No edge setting!\n");
- break;
-
- case IRQ_TYPE_EDGE_RISING:
- con = S5PC1XX_WKUP_INT_RISEEDGE;
- break;
-
- case IRQ_TYPE_EDGE_FALLING:
- con = S5PC1XX_WKUP_INT_FALLEDGE;
- break;
-
- case IRQ_TYPE_EDGE_BOTH:
- con = S5PC1XX_WKUP_INT_BOTHEDGE;
- break;
-
- case IRQ_TYPE_LEVEL_LOW:
- con = S5PC1XX_WKUP_INT_LOWLEV;
- break;
-
- case IRQ_TYPE_LEVEL_HIGH:
- con = S5PC1XX_WKUP_INT_HILEV;
- break;
-
- default:
- printk(KERN_ERR "No such irq type %d", type);
- return -EINVAL;
- }
-
- gpio = real & (8 - 1);
- shift = gpio << 2;
-
- ctrl = __raw_readl(S5PC1XX_WKUP_INT_CON(bank));
- ctrl &= ~(0x7 << shift);
- ctrl |= con << shift;
- __raw_writel(ctrl, S5PC1XX_WKUP_INT_CON(bank));
-
- switch (real) {
- case 0 ... 7:
- gpio = S5PC100_GPH0(gpio);
- break;
- case 8 ... 15:
- gpio = S5PC100_GPH1(gpio);
- break;
- case 16 ... 23:
- gpio = S5PC100_GPH2(gpio);
- break;
- case 24 ... 31:
- gpio = S5PC100_GPH3(gpio);
- break;
- default:
- return -EINVAL;
- }
-
- sfn = S3C_GPIO_SFN(0x2);
- s3c_gpio_cfgpin(gpio, sfn);
-
- return 0;
-}
-
-static struct irq_chip s3c_irq_eint = {
- .name = "EINT",
- .mask = s3c_irq_eint_mask,
- .unmask = s3c_irq_eint_unmask,
- .mask_ack = s3c_irq_eint_maskack,
- .ack = s3c_irq_eint_ack,
- .set_type = s3c_irq_eint_set_type,
- .set_wake = s3c_irqext_wake,
-};
-
-/* s3c_irq_demux_eint
- *
- * This function demuxes the IRQ from external interrupts,
- * from IRQ_EINT(16) to IRQ_EINT(31). It is designed to be inlined into
- * the specific handlers s3c_irq_demux_eintX_Y.
- */
-static inline void s3c_irq_demux_eint(unsigned int start, unsigned int end)
-{
- u32 status = __raw_readl(S5PC1XX_WKUP_INT_PEND((start >> 3)));
- u32 mask = __raw_readl(S5PC1XX_WKUP_INT_MASK((start >> 3)));
- unsigned int irq;
-
- status &= ~mask;
- status &= (1 << (end - start + 1)) - 1;
-
- for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) {
- if (status & 1)
- generic_handle_irq(irq);
-
- status >>= 1;
- }
-}
-
-static void s3c_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
-{
- s3c_irq_demux_eint(16, 23);
- s3c_irq_demux_eint(24, 31);
-}
-
-/*
- * Handle EINT0 ... EINT15 at VIC directly
- */
-static void s3c_irq_vic_eint_mask(unsigned int irq)
-{
- void __iomem *base = get_irq_chip_data(irq);
- unsigned int real;
-
- s3c_irq_eint_mask(irq);
- real = s3c_get_eint(irq);
- writel(1 << real, base + VIC_INT_ENABLE_CLEAR);
-}
-
-static void s3c_irq_vic_eint_unmask(unsigned int irq)
-{
- void __iomem *base = get_irq_chip_data(irq);
- unsigned int real;
-
- s3c_irq_eint_unmask(irq);
- real = s3c_get_eint(irq);
- writel(1 << real, base + VIC_INT_ENABLE);
-}
-
-static inline void s3c_irq_vic_eint_ack(unsigned int irq)
-{
- u32 bit;
- u32 bank = s3c_get_bank(irq);
-
- bit = s3c_eint_to_bit(irq);
- __raw_writel(bit, S5PC1XX_WKUP_INT_PEND(bank));
-}
-
-static void s3c_irq_vic_eint_maskack(unsigned int irq)
-{
- /* compiler should in-line these */
- s3c_irq_vic_eint_mask(irq);
- s3c_irq_vic_eint_ack(irq);
-}
-
-static struct irq_chip s3c_irq_vic_eint = {
- .name = "EINT",
- .mask = s3c_irq_vic_eint_mask,
- .unmask = s3c_irq_vic_eint_unmask,
- .mask_ack = s3c_irq_vic_eint_maskack,
- .ack = s3c_irq_vic_eint_ack,
- .set_type = s3c_irq_eint_set_type,
- .set_wake = s3c_irqext_wake,
-};
-
-static int __init s5pc1xx_init_irq_eint(void)
-{
- int irq;
-
- for (irq = IRQ_EINT0; irq <= IRQ_EINT15; irq++) {
- set_irq_chip(irq, &s3c_irq_vic_eint);
- set_irq_handler(irq, handle_level_irq);
- set_irq_flags(irq, IRQF_VALID);
- }
-
- for (irq = IRQ_EINT(16); irq <= IRQ_EINT(31); irq++) {
- set_irq_chip(irq, &s3c_irq_eint);
- set_irq_handler(irq, handle_level_irq);
- set_irq_flags(irq, IRQF_VALID);
- }
-
- set_irq_chained_handler(IRQ_EINT16_31, s3c_irq_demux_eint16_31);
-
- return 0;
-}
-
-arch_initcall(s5pc1xx_init_irq_eint);
+++ /dev/null
-/* arch/arm/plat-s5pc1xx/irq.c
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * S5PC1XX - Interrupt handling
- *
- * Based on plat-s3c64xx/irq.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <asm/hardware/vic.h>
-
-#include <mach/map.h>
-#include <plat/irq-vic-timer.h>
-#include <plat/irq-uart.h>
-#include <plat/cpu.h>
-
-/* Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3]
- * are consecutive when looking up the interrupt in the demux routines.
- */
-static struct s3c_uart_irq uart_irqs[] = {
- [0] = {
- .regs = (void *)S3C_VA_UART0,
- .base_irq = IRQ_S3CUART_BASE0,
- .parent_irq = IRQ_UART0,
- },
- [1] = {
- .regs = (void *)S3C_VA_UART1,
- .base_irq = IRQ_S3CUART_BASE1,
- .parent_irq = IRQ_UART1,
- },
- [2] = {
- .regs = (void *)S3C_VA_UART2,
- .base_irq = IRQ_S3CUART_BASE2,
- .parent_irq = IRQ_UART2,
- },
- [3] = {
- .regs = (void *)S3C_VA_UART3,
- .base_irq = IRQ_S3CUART_BASE3,
- .parent_irq = IRQ_UART3,
- },
-};
-
-void __init s5pc1xx_init_irq(u32 *vic_valid, int num)
-{
- int i;
-
- printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
-
- /* initialise the pair of VICs */
- for (i = 0; i < num; i++)
- vic_init((void *)S5PC1XX_VA_VIC(i), S3C_IRQ(i * S3C_IRQ_OFFSET),
- vic_valid[i], 0);
-
- /* add the timer sub-irqs */
-
- s3c_init_vic_timer_irq(IRQ_TIMER0_VIC, IRQ_TIMER0);
- s3c_init_vic_timer_irq(IRQ_TIMER1_VIC, IRQ_TIMER1);
- s3c_init_vic_timer_irq(IRQ_TIMER2_VIC, IRQ_TIMER2);
- s3c_init_vic_timer_irq(IRQ_TIMER3_VIC, IRQ_TIMER3);
- s3c_init_vic_timer_irq(IRQ_TIMER4_VIC, IRQ_TIMER4);
-
- s3c_init_uart_irqs(uart_irqs, ARRAY_SIZE(uart_irqs));
-}
-
-
+++ /dev/null
-/* linux/arch/arm/plat-s5pc1xx/s5pc100-clock.c
- *
- * Copyright 2009 Samsung Electronics, Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 based common clock support
- *
- * Based on plat-s3c64xx/s3c6400-clock.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/sysdev.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <plat/cpu-freq.h>
-
-#include <plat/regs-clock.h>
-#include <plat/clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/devs.h>
-#include <plat/s5pc100.h>
-
-/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
- * ext_xtal_mux for want of an actual name from the manual.
-*/
-
-static struct clk clk_ext_xtal_mux = {
- .name = "ext_xtal",
- .id = -1,
-};
-
-#define clk_fin_apll clk_ext_xtal_mux
-#define clk_fin_mpll clk_ext_xtal_mux
-#define clk_fin_epll clk_ext_xtal_mux
-#define clk_fin_hpll clk_ext_xtal_mux
-
-#define clk_fout_mpll clk_mpll
-#define clk_vclk_54m clk_54m
-
-/* APLL */
-static struct clk clk_fout_apll = {
- .name = "fout_apll",
- .id = -1,
- .rate = 27000000,
-};
-
-static struct clk *clk_src_apll_list[] = {
- [0] = &clk_fin_apll,
- [1] = &clk_fout_apll,
-};
-
-static struct clksrc_sources clk_src_apll = {
- .sources = clk_src_apll_list,
- .nr_sources = ARRAY_SIZE(clk_src_apll_list),
-};
-
-static struct clksrc_clk clk_mout_apll = {
- .clk = {
- .name = "mout_apll",
- .id = -1,
- },
- .sources = &clk_src_apll,
- .reg_src = { .reg = S5PC100_CLKSRC0, .shift = 0, .size = 1, },
-};
-
-static unsigned long s5pc100_clk_dout_apll_get_rate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- unsigned int ratio;
-
- ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_APLL_MASK;
- ratio >>= S5PC100_CLKDIV0_APLL_SHIFT;
-
- return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_apll = {
- .name = "dout_apll",
- .id = -1,
- .parent = &clk_mout_apll.clk,
- .ops = &(struct clk_ops) {
- .get_rate = s5pc100_clk_dout_apll_get_rate,
- },
-};
-
-static unsigned long s5pc100_clk_arm_get_rate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- unsigned int ratio;
-
- ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_ARM_MASK;
- ratio >>= S5PC100_CLKDIV0_ARM_SHIFT;
-
- return rate / (ratio + 1);
-}
-
-static unsigned long s5pc100_clk_arm_round_rate(struct clk *clk,
- unsigned long rate)
-{
- unsigned long parent = clk_get_rate(clk->parent);
- u32 div;
-
- if (parent < rate)
- return rate;
-
- div = (parent / rate) - 1;
- if (div > S5PC100_CLKDIV0_ARM_MASK)
- div = S5PC100_CLKDIV0_ARM_MASK;
-
- return parent / (div + 1);
-}
-
-static int s5pc100_clk_arm_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned long parent = clk_get_rate(clk->parent);
- u32 div;
- u32 val;
-
- if (rate < parent / (S5PC100_CLKDIV0_ARM_MASK + 1))
- return -EINVAL;
-
- rate = clk_round_rate(clk, rate);
- div = clk_get_rate(clk->parent) / rate;
-
- val = __raw_readl(S5PC100_CLKDIV0);
- val &= S5PC100_CLKDIV0_ARM_MASK;
- val |= (div - 1);
- __raw_writel(val, S5PC100_CLKDIV0);
-
- return 0;
-}
-
-static struct clk clk_arm = {
- .name = "armclk",
- .id = -1,
- .parent = &clk_dout_apll,
- .ops = &(struct clk_ops) {
- .get_rate = s5pc100_clk_arm_get_rate,
- .set_rate = s5pc100_clk_arm_set_rate,
- .round_rate = s5pc100_clk_arm_round_rate,
- },
-};
-
-static unsigned long s5pc100_clk_dout_d0_bus_get_rate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- unsigned int ratio;
-
- ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_D0_MASK;
- ratio >>= S5PC100_CLKDIV0_D0_SHIFT;
-
- return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_d0_bus = {
- .name = "dout_d0_bus",
- .id = -1,
- .parent = &clk_arm,
- .ops = &(struct clk_ops) {
- .get_rate = s5pc100_clk_dout_d0_bus_get_rate,
- },
-};
-
-static unsigned long s5pc100_clk_dout_pclkd0_get_rate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- unsigned int ratio;
-
- ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_PCLKD0_MASK;
- ratio >>= S5PC100_CLKDIV0_PCLKD0_SHIFT;
-
- return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_pclkd0 = {
- .name = "dout_pclkd0",
- .id = -1,
- .parent = &clk_dout_d0_bus,
- .ops = &(struct clk_ops) {
- .get_rate = s5pc100_clk_dout_pclkd0_get_rate,
- },
-};
-
-static unsigned long s5pc100_clk_dout_apll2_get_rate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- unsigned int ratio;
-
- ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_APLL2_MASK;
- ratio >>= S5PC100_CLKDIV1_APLL2_SHIFT;
-
- return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_apll2 = {
- .name = "dout_apll2",
- .id = -1,
- .parent = &clk_mout_apll.clk,
- .ops = &(struct clk_ops) {
- .get_rate = s5pc100_clk_dout_apll2_get_rate,
- },
-};
-
-/* MPLL */
-static struct clk *clk_src_mpll_list[] = {
- [0] = &clk_fin_mpll,
- [1] = &clk_fout_mpll,
-};
-
-static struct clksrc_sources clk_src_mpll = {
- .sources = clk_src_mpll_list,
- .nr_sources = ARRAY_SIZE(clk_src_mpll_list),
-};
-
-static struct clksrc_clk clk_mout_mpll = {
- .clk = {
- .name = "mout_mpll",
- .id = -1,
- },
- .sources = &clk_src_mpll,
- .reg_src = { .reg = S5PC100_CLKSRC0, .shift = 4, .size = 1, },
-};
-
-static struct clk *clkset_am_list[] = {
- [0] = &clk_mout_mpll.clk,
- [1] = &clk_dout_apll2,
-};
-
-static struct clksrc_sources clk_src_am = {
- .sources = clkset_am_list,
- .nr_sources = ARRAY_SIZE(clkset_am_list),
-};
-
-static struct clksrc_clk clk_mout_am = {
- .clk = {
- .name = "mout_am",
- .id = -1,
- },
- .sources = &clk_src_am,
- .reg_src = { .reg = S5PC100_CLKSRC0, .shift = 16, .size = 1, },
-};
-
-static unsigned long s5pc100_clk_dout_d1_bus_get_rate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- unsigned int ratio;
-
- printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
- ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_D1_MASK;
- ratio >>= S5PC100_CLKDIV1_D1_SHIFT;
-
- return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_d1_bus = {
- .name = "dout_d1_bus",
- .id = -1,
- .parent = &clk_mout_am.clk,
- .ops = &(struct clk_ops) {
- .get_rate = s5pc100_clk_dout_d1_bus_get_rate,
- },
-};
-
-static struct clk *clkset_onenand_list[] = {
- [0] = &clk_dout_d0_bus,
- [1] = &clk_dout_d1_bus,
-};
-
-static struct clksrc_sources clk_src_onenand = {
- .sources = clkset_onenand_list,
- .nr_sources = ARRAY_SIZE(clkset_onenand_list),
-};
-
-static struct clksrc_clk clk_mout_onenand = {
- .clk = {
- .name = "mout_onenand",
- .id = -1,
- },
- .sources = &clk_src_onenand,
- .reg_src = { .reg = S5PC100_CLKSRC0, .shift = 24, .size = 1, },
-};
-
-static unsigned long s5pc100_clk_dout_pclkd1_get_rate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- unsigned int ratio;
-
- printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
- ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_PCLKD1_MASK;
- ratio >>= S5PC100_CLKDIV1_PCLKD1_SHIFT;
-
- return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_pclkd1 = {
- .name = "dout_pclkd1",
- .id = -1,
- .parent = &clk_dout_d1_bus,
- .ops = &(struct clk_ops) {
- .get_rate = s5pc100_clk_dout_pclkd1_get_rate,
- },
-};
-
-static unsigned long s5pc100_clk_dout_mpll2_get_rate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- unsigned int ratio;
-
- printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
- ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_MPLL2_MASK;
- ratio >>= S5PC100_CLKDIV1_MPLL2_SHIFT;
-
- return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_mpll2 = {
- .name = "dout_mpll2",
- .id = -1,
- .parent = &clk_mout_am.clk,
- .ops = &(struct clk_ops) {
- .get_rate = s5pc100_clk_dout_mpll2_get_rate,
- },
-};
-
-static unsigned long s5pc100_clk_dout_cam_get_rate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- unsigned int ratio;
-
- printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
- ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_CAM_MASK;
- ratio >>= S5PC100_CLKDIV1_CAM_SHIFT;
-
- return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_cam = {
- .name = "dout_cam",
- .id = -1,
- .parent = &clk_dout_mpll2,
- .ops = &(struct clk_ops) {
- .get_rate = s5pc100_clk_dout_cam_get_rate,
- },
-};
-
-static unsigned long s5pc100_clk_dout_mpll_get_rate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- unsigned int ratio;
-
- printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
- ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_MPLL_MASK;
- ratio >>= S5PC100_CLKDIV1_MPLL_SHIFT;
-
- return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_mpll = {
- .name = "dout_mpll",
- .id = -1,
- .parent = &clk_mout_am.clk,
- .ops = &(struct clk_ops) {
- .get_rate = s5pc100_clk_dout_mpll_get_rate,
- },
-};
-
-/* EPLL */
-static struct clk clk_fout_epll = {
- .name = "fout_epll",
- .id = -1,
-};
-
-static struct clk *clk_src_epll_list[] = {
- [0] = &clk_fin_epll,
- [1] = &clk_fout_epll,
-};
-
-static struct clksrc_sources clk_src_epll = {
- .sources = clk_src_epll_list,
- .nr_sources = ARRAY_SIZE(clk_src_epll_list),
-};
-
-static struct clksrc_clk clk_mout_epll = {
- .clk = {
- .name = "mout_epll",
- .id = -1,
- },
- .sources = &clk_src_epll,
- .reg_src = { .reg = S5PC100_CLKSRC0, .shift = 8, .size = 1, },
-};
-
-/* HPLL */
-static struct clk clk_fout_hpll = {
- .name = "fout_hpll",
- .id = -1,
-};
-
-static struct clk *clk_src_hpll_list[] = {
- [0] = &clk_27m,
- [1] = &clk_fout_hpll,
-};
-
-static struct clksrc_sources clk_src_hpll = {
- .sources = clk_src_hpll_list,
- .nr_sources = ARRAY_SIZE(clk_src_hpll_list),
-};
-
-static struct clksrc_clk clk_mout_hpll = {
- .clk = {
- .name = "mout_hpll",
- .id = -1,
- },
- .sources = &clk_src_hpll,
- .reg_src = { .reg = S5PC100_CLKSRC0, .shift = 12, .size = 1, },
-};
-
-/* Peripherals */
-/*
- * The peripheral clocks are all controlled via clocksource followed
- * by an optional divider and gate stage. We currently roll this into
- * one clock which hides the intermediate clock from the mux.
- *
- * Note, the JPEG clock can only be an even divider...
- *
- * The scaler and LCD clocks depend on the S5PC100 version, and also
- * have a common parent divisor so are not included here.
- */
-
-static struct clk clk_iis_cd0 = {
- .name = "iis_cdclk0",
- .id = -1,
-};
-
-static struct clk clk_iis_cd1 = {
- .name = "iis_cdclk1",
- .id = -1,
-};
-
-static struct clk clk_iis_cd2 = {
- .name = "iis_cdclk2",
- .id = -1,
-};
-
-static struct clk clk_pcm_cd0 = {
- .name = "pcm_cdclk0",
- .id = -1,
-};
-
-static struct clk clk_pcm_cd1 = {
- .name = "pcm_cdclk1",
- .id = -1,
-};
-
-static struct clk *clkset_audio0_list[] = {
- &clk_mout_epll.clk,
- &clk_dout_mpll,
- &clk_fin_epll,
- &clk_iis_cd0,
- &clk_pcm_cd0,
- &clk_mout_hpll.clk,
-};
-
-static struct clksrc_sources clkset_audio0 = {
- .sources = clkset_audio0_list,
- .nr_sources = ARRAY_SIZE(clkset_audio0_list),
-};
-
-static struct clk *clkset_spi_list[] = {
- &clk_mout_epll.clk,
- &clk_dout_mpll2,
- &clk_fin_epll,
- &clk_mout_hpll.clk,
-};
-
-static struct clksrc_sources clkset_spi = {
- .sources = clkset_spi_list,
- .nr_sources = ARRAY_SIZE(clkset_spi_list),
-};
-
-static struct clk *clkset_uart_list[] = {
- &clk_mout_epll.clk,
- &clk_dout_mpll,
-};
-
-static struct clksrc_sources clkset_uart = {
- .sources = clkset_uart_list,
- .nr_sources = ARRAY_SIZE(clkset_uart_list),
-};
-
-static struct clk *clkset_audio1_list[] = {
- &clk_mout_epll.clk,
- &clk_dout_mpll,
- &clk_fin_epll,
- &clk_iis_cd1,
- &clk_pcm_cd1,
- &clk_mout_hpll.clk,
-};
-
-static struct clksrc_sources clkset_audio1 = {
- .sources = clkset_audio1_list,
- .nr_sources = ARRAY_SIZE(clkset_audio1_list),
-};
-
-static struct clk *clkset_audio2_list[] = {
- &clk_mout_epll.clk,
- &clk_dout_mpll,
- &clk_fin_epll,
- &clk_iis_cd2,
- &clk_mout_hpll.clk,
-};
-
-static struct clksrc_sources clkset_audio2 = {
- .sources = clkset_audio2_list,
- .nr_sources = ARRAY_SIZE(clkset_audio2_list),
-};
-
-static struct clksrc_clk clksrc_audio[] = {
- {
- .clk = {
- .name = "audio-bus",
- .id = 0,
- .ctrlbit = S5PC100_CLKGATE_SCLK1_AUDIO0,
- .enable = s5pc100_sclk1_ctrl,
- },
- .sources = &clkset_audio0,
- .reg_div = { .reg = S5PC100_CLKDIV4, .shift = 12, .size = 4, },
- .reg_src = { .reg = S5PC100_CLKSRC3, .shift = 12, .size = 3, },
- }, {
- .clk = {
- .name = "audio-bus",
- .id = 1,
- .ctrlbit = S5PC100_CLKGATE_SCLK1_AUDIO1,
- .enable = s5pc100_sclk1_ctrl,
- },
- .sources = &clkset_audio1,
- .reg_div = { .reg = S5PC100_CLKDIV4, .shift = 16, .size = 4, },
- .reg_src = { .reg = S5PC100_CLKSRC3, .shift = 16, .size = 3, },
- }, {
- .clk = {
- .name = "audio-bus",
- .id = 2,
- .ctrlbit = S5PC100_CLKGATE_SCLK1_AUDIO2,
- .enable = s5pc100_sclk1_ctrl,
- },
- .sources = &clkset_audio2,
- .reg_div = { .reg = S5PC100_CLKDIV4, .shift = 20, .size = 4, },
- .reg_src = { .reg = S5PC100_CLKSRC3, .shift = 20, .size = 3, },
- },
-};
-
-static struct clk *clkset_spdif_list[] = {
- &clksrc_audio[0].clk,
- &clksrc_audio[1].clk,
- &clksrc_audio[2].clk,
-};
-
-static struct clksrc_sources clkset_spdif = {
- .sources = clkset_spdif_list,
- .nr_sources = ARRAY_SIZE(clkset_spdif_list),
-};
-
-static struct clk *clkset_lcd_fimc_list[] = {
- &clk_mout_epll.clk,
- &clk_dout_mpll,
- &clk_mout_hpll.clk,
- &clk_vclk_54m,
-};
-
-static struct clksrc_sources clkset_lcd_fimc = {
- .sources = clkset_lcd_fimc_list,
- .nr_sources = ARRAY_SIZE(clkset_lcd_fimc_list),
-};
-
-static struct clk *clkset_mmc_list[] = {
- &clk_mout_epll.clk,
- &clk_dout_mpll,
- &clk_fin_epll,
- &clk_mout_hpll.clk ,
-};
-
-static struct clksrc_sources clkset_mmc = {
- .sources = clkset_mmc_list,
- .nr_sources = ARRAY_SIZE(clkset_mmc_list),
-};
-
-static struct clk *clkset_usbhost_list[] = {
- &clk_mout_epll.clk,
- &clk_dout_mpll,
- &clk_mout_hpll.clk,
- &clk_48m,
-};
-
-static struct clksrc_sources clkset_usbhost = {
- .sources = clkset_usbhost_list,
- .nr_sources = ARRAY_SIZE(clkset_usbhost_list),
-};
-
-static struct clksrc_clk clksrc_clks[] = {
- {
- .clk = {
- .name = "spi_bus",
- .id = 0,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI0,
- .enable = s5pc100_sclk0_ctrl,
-
- },
- .sources = &clkset_spi,
- .reg_div = { .reg = S5PC100_CLKDIV2, .shift = 4, .size = 4, },
- .reg_src = { .reg = S5PC100_CLKSRC1, .shift = 4, .size = 2, },
- }, {
- .clk = {
- .name = "spi_bus",
- .id = 1,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI1,
- .enable = s5pc100_sclk0_ctrl,
- },
- .sources = &clkset_spi,
- .reg_div = { .reg = S5PC100_CLKDIV2, .shift = 8, .size = 4, },
- .reg_src = { .reg = S5PC100_CLKSRC1, .shift = 8, .size = 2, },
- }, {
- .clk = {
- .name = "spi_bus",
- .id = 2,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI2,
- .enable = s5pc100_sclk0_ctrl,
- },
- .sources = &clkset_spi,
- .reg_div = { .reg = S5PC100_CLKDIV2, .shift = 12, .size = 4, },
- .reg_src = { .reg = S5PC100_CLKSRC1, .shift = 12, .size = 2, },
- }, {
- .clk = {
- .name = "uclk1",
- .id = -1,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_UART,
- .enable = s5pc100_sclk0_ctrl,
- },
- .sources = &clkset_uart,
- .reg_div = { .reg = S5PC100_CLKDIV2, .shift = 0, .size = 3, },
- .reg_src = { .reg = S5PC100_CLKSRC1, .shift = 0, .size = 1, },
- }, {
- .clk = {
- .name = "spdif",
- .id = -1,
- },
- .sources = &clkset_spdif,
- .reg_src = { .reg = S5PC100_CLKSRC3, .shift = 24, .size = 2, },
- }, {
- .clk = {
- .name = "lcd",
- .id = -1,
- .ctrlbit = S5PC100_CLKGATE_SCLK1_LCD,
- .enable = s5pc100_sclk1_ctrl,
- },
- .sources = &clkset_lcd_fimc,
- .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 12, .size = 4, },
- .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 12, .size = 2, },
- }, {
- .clk = {
- .name = "fimc",
- .id = 0,
- .ctrlbit = S5PC100_CLKGATE_SCLK1_FIMC0,
- .enable = s5pc100_sclk1_ctrl,
- },
- .sources = &clkset_lcd_fimc,
- .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 16, .size = 4, },
- .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 16, .size = 2, },
- }, {
- .clk = {
- .name = "fimc",
- .id = 1,
- .ctrlbit = S5PC100_CLKGATE_SCLK1_FIMC1,
- .enable = s5pc100_sclk1_ctrl,
- },
- .sources = &clkset_lcd_fimc,
- .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 20, .size = 4, },
- .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 20, .size = 2, },
- }, {
- .clk = {
- .name = "fimc",
- .id = 2,
- .ctrlbit = S5PC100_CLKGATE_SCLK1_FIMC2,
- .enable = s5pc100_sclk1_ctrl,
- },
- .sources = &clkset_lcd_fimc,
- .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 24, .size = 4, },
- .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 24, .size = 2, },
- }, {
- .clk = {
- .name = "mmc_bus",
- .id = 0,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC0,
- .enable = s5pc100_sclk0_ctrl,
- },
- .sources = &clkset_mmc,
- .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 0, .size = 4, },
- .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 0, .size = 2, },
- }, {
- .clk = {
- .name = "mmc_bus",
- .id = 1,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC1,
- .enable = s5pc100_sclk0_ctrl,
- },
- .sources = &clkset_mmc,
- .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 4, .size = 4, },
- .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 4, .size = 2, },
- }, {
- .clk = {
- .name = "mmc_bus",
- .id = 2,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC2,
- .enable = s5pc100_sclk0_ctrl,
- },
- .sources = &clkset_mmc,
- .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 8, .size = 4, },
- .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 8, .size = 2, },
- }, {
- .clk = {
- .name = "usbhost",
- .id = -1,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_USBHOST,
- .enable = s5pc100_sclk0_ctrl,
- },
- .sources = &clkset_usbhost,
- .reg_div = { .reg = S5PC100_CLKDIV2, .shift = 20, .size = 4, },
- .reg_src = { .reg = S5PC100_CLKSRC1, .shift = 20, .size = 2, },
- }
-};
-
-/* Clock initialisation code */
-
-static struct clksrc_clk *init_parents[] = {
- &clk_mout_apll,
- &clk_mout_mpll,
- &clk_mout_am,
- &clk_mout_onenand,
- &clk_mout_epll,
- &clk_mout_hpll,
-};
-
-#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
-
-void __init_or_cpufreq s5pc100_setup_clocks(void)
-{
- struct clk *xtal_clk;
- unsigned long xtal;
- unsigned long armclk;
- unsigned long hclkd0;
- unsigned long hclk;
- unsigned long pclkd0;
- unsigned long pclk;
- unsigned long apll, mpll, epll, hpll;
- unsigned int ptr;
- u32 clkdiv0, clkdiv1;
-
- printk(KERN_DEBUG "%s: registering clocks\n", __func__);
-
- clkdiv0 = __raw_readl(S5PC100_CLKDIV0);
- clkdiv1 = __raw_readl(S5PC100_CLKDIV1);
-
- printk(KERN_DEBUG "%s: clkdiv0 = %08x, clkdiv1 = %08x\n", __func__, clkdiv0, clkdiv1);
-
- xtal_clk = clk_get(NULL, "xtal");
- BUG_ON(IS_ERR(xtal_clk));
-
- xtal = clk_get_rate(xtal_clk);
- clk_put(xtal_clk);
-
- printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
-
- apll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_APLL_CON));
- mpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_MPLL_CON));
- epll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_EPLL_CON));
- hpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_HPLL_CON));
-
- printk(KERN_INFO "S5PC100: Apll=%ld.%03ld Mhz, Mpll=%ld.%03ld Mhz"
- ", Epll=%ld.%03ld Mhz, Hpll=%ld.%03ld Mhz\n",
- print_mhz(apll), print_mhz(mpll),
- print_mhz(epll), print_mhz(hpll));
-
- armclk = apll / GET_DIV(clkdiv0, S5PC100_CLKDIV0_APLL);
- armclk = armclk / GET_DIV(clkdiv0, S5PC100_CLKDIV0_ARM);
- hclkd0 = armclk / GET_DIV(clkdiv0, S5PC100_CLKDIV0_D0);
- pclkd0 = hclkd0 / GET_DIV(clkdiv0, S5PC100_CLKDIV0_PCLKD0);
- hclk = mpll / GET_DIV(clkdiv1, S5PC100_CLKDIV1_D1);
- pclk = hclk / GET_DIV(clkdiv1, S5PC100_CLKDIV1_PCLKD1);
-
- printk(KERN_INFO "S5PC100: ARMCLK=%ld.%03ld MHz, HCLKD0=%ld.%03ld MHz,"
- " PCLKD0=%ld.%03ld MHz\n, HCLK=%ld.%03ld MHz,"
- " PCLK=%ld.%03ld MHz\n",
- print_mhz(armclk), print_mhz(hclkd0),
- print_mhz(pclkd0), print_mhz(hclk), print_mhz(pclk));
-
- clk_fout_apll.rate = apll;
- clk_fout_mpll.rate = mpll;
- clk_fout_epll.rate = epll;
- clk_fout_hpll.rate = hpll;
-
- clk_h.rate = hclk;
- clk_p.rate = pclk;
- clk_f.rate = armclk;
-
- for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
- s3c_set_clksrc(init_parents[ptr], true);
-
- for (ptr = 0; ptr < ARRAY_SIZE(clksrc_audio); ptr++)
- s3c_set_clksrc(clksrc_audio + ptr, true);
-
- for (ptr = 0; ptr < ARRAY_SIZE(clksrc_clks); ptr++)
- s3c_set_clksrc(clksrc_clks + ptr, true);
-}
-
-static struct clk *clks[] __initdata = {
- &clk_ext_xtal_mux,
- &clk_dout_apll,
- &clk_dout_d0_bus,
- &clk_dout_pclkd0,
- &clk_dout_apll2,
- &clk_mout_apll.clk,
- &clk_mout_mpll.clk,
- &clk_mout_epll.clk,
- &clk_mout_hpll.clk,
- &clk_mout_am.clk,
- &clk_dout_d1_bus,
- &clk_mout_onenand.clk,
- &clk_dout_pclkd1,
- &clk_dout_mpll2,
- &clk_dout_cam,
- &clk_dout_mpll,
- &clk_fout_epll,
- &clk_iis_cd0,
- &clk_iis_cd1,
- &clk_iis_cd2,
- &clk_pcm_cd0,
- &clk_pcm_cd1,
- &clk_arm,
-};
-
-void __init s5pc100_register_clocks(void)
-{
- struct clk *clkp;
- int ret;
- int ptr;
-
- for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
- clkp = clks[ptr];
- ret = s3c24xx_register_clock(clkp);
- if (ret < 0) {
- printk(KERN_ERR "Failed to register clock %s (%d)\n",
- clkp->name, ret);
- }
- }
-
- s3c_register_clksrc(clksrc_audio, ARRAY_SIZE(clksrc_audio));
- s3c_register_clksrc(clksrc_clks, ARRAY_SIZE(clksrc_clks));
-}
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff