* @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated
* base on contiguous rules and wider channels will be allowed to cross
* multiple contiguous/overlapping frequency ranges.
+ * @NL80211_RRF_GO_CONCURRENT: See &NL80211_FREQUENCY_ATTR_GO_CONCURRENT
+ * @NL80211_RRF_NO_HT40MINUS: channels can't be used in HT40- operation
+ * @NL80211_RRF_NO_HT40PLUS: channels can't be used in HT40+ operation
+ * @NL80211_RRF_NO_80MHZ: 80MHz operation not allowed
+ * @NL80211_RRF_NO_160MHZ: 160MHz operation not allowed
*/
enum nl80211_reg_rule_flags {
NL80211_RRF_NO_OFDM = 1<<0,
NL80211_RRF_NO_IR = 1<<7,
__NL80211_RRF_NO_IBSS = 1<<8,
NL80211_RRF_AUTO_BW = 1<<11,
+ NL80211_RRF_GO_CONCURRENT = 1<<12,
+ NL80211_RRF_NO_HT40MINUS = 1<<13,
+ NL80211_RRF_NO_HT40PLUS = 1<<14,
+ NL80211_RRF_NO_80MHZ = 1<<15,
+ NL80211_RRF_NO_160MHZ = 1<<16,
};
#define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR
#define NL80211_RRF_NO_IBSS NL80211_RRF_NO_IR
#define NL80211_RRF_NO_IR NL80211_RRF_NO_IR
+#define NL80211_RRF_NO_HT40 (NL80211_RRF_NO_HT40MINUS |\
+ NL80211_RRF_NO_HT40PLUS)
/* For backport compatibility with older userspace */
#define NL80211_RRF_NO_IR_ALL (NL80211_RRF_NO_IR | __NL80211_RRF_NO_IBSS)
return get_cfg80211_regdom();
}
-unsigned int reg_get_max_bandwidth(const struct ieee80211_regdomain *rd,
- const struct ieee80211_reg_rule *rule)
+static unsigned int
+reg_get_max_bandwidth_from_range(const struct ieee80211_regdomain *rd,
+ const struct ieee80211_reg_rule *rule)
{
const struct ieee80211_freq_range *freq_range = &rule->freq_range;
const struct ieee80211_freq_range *freq_range_tmp;
return end_freq - start_freq;
}
+unsigned int reg_get_max_bandwidth(const struct ieee80211_regdomain *rd,
+ const struct ieee80211_reg_rule *rule)
+{
+ unsigned int bw = reg_get_max_bandwidth_from_range(rd, rule);
+
+ if (rule->flags & NL80211_RRF_NO_160MHZ)
+ bw = min_t(unsigned int, bw, MHZ_TO_KHZ(80));
+ if (rule->flags & NL80211_RRF_NO_80MHZ)
+ bw = min_t(unsigned int, bw, MHZ_TO_KHZ(40));
+
+ /*
+ * HT40+/HT40- limits are handled per-channel. Only limit BW if both
+ * are not allowed.
+ */
+ if (rule->flags & NL80211_RRF_NO_HT40MINUS &&
+ rule->flags & NL80211_RRF_NO_HT40PLUS)
+ bw = min_t(unsigned int, bw, MHZ_TO_KHZ(20));
+
+ return bw;
+}
+
/* Sanity check on a regulatory rule */
static bool is_valid_reg_rule(const struct ieee80211_reg_rule *rule)
{
channel_flags |= IEEE80211_CHAN_NO_OFDM;
if (rd_flags & NL80211_RRF_NO_OUTDOOR)
channel_flags |= IEEE80211_CHAN_INDOOR_ONLY;
+ if (rd_flags & NL80211_RRF_GO_CONCURRENT)
+ channel_flags |= IEEE80211_CHAN_GO_CONCURRENT;
+ if (rd_flags & NL80211_RRF_NO_HT40MINUS)
+ channel_flags |= IEEE80211_CHAN_NO_HT40MINUS;
+ if (rd_flags & NL80211_RRF_NO_HT40PLUS)
+ channel_flags |= IEEE80211_CHAN_NO_HT40PLUS;
+ if (rd_flags & NL80211_RRF_NO_80MHZ)
+ channel_flags |= IEEE80211_CHAN_NO_80MHZ;
+ if (rd_flags & NL80211_RRF_NO_160MHZ)
+ channel_flags |= IEEE80211_CHAN_NO_160MHZ;
return channel_flags;
}