#include <asm/uaccess.h> /* For copy_from_user/copy_to_user */
#include <linux/sched.h>
+#include <linux/interrupt.h> /* For tasklet and interrupt structs/defines */
+#include <linux/ctype.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_reg.h>
+#include <asm/io.h> /* For read[bwl]/write[bwl] */
+
#include "dgap_driver.h"
#include "dgap_pci.h"
#include "dgap_fep5.h"
#include "dgap_parse.h"
#include "dgap_trace.h"
#include "dgap_sysfs.h"
+#include "dgap_types.h"
+
+#define init_MUTEX(sem) sema_init(sem, 1)
+#define DECLARE_MUTEX(name) \
+ struct semaphore name = __SEMAPHORE_INITIALIZER(name, 1)
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Digi International, http://www.digi.com");
static int dgap_do_remap(struct board_t *brd);
static irqreturn_t dgap_intr(int irq, void *voidbrd);
+/* Our function prototypes */
+static int dgap_tty_open(struct tty_struct *tty, struct file *file);
+static void dgap_tty_close(struct tty_struct *tty, struct file *file);
+static int dgap_block_til_ready(struct tty_struct *tty, struct file *file, struct channel_t *ch);
+static int dgap_tty_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg);
+static int dgap_tty_digigeta(struct tty_struct *tty, struct digi_t __user *retinfo);
+static int dgap_tty_digiseta(struct tty_struct *tty, struct digi_t __user *new_info);
+static int dgap_tty_digigetedelay(struct tty_struct *tty, int __user *retinfo);
+static int dgap_tty_digisetedelay(struct tty_struct *tty, int __user *new_info);
+static int dgap_tty_write_room(struct tty_struct* tty);
+static int dgap_tty_chars_in_buffer(struct tty_struct* tty);
+static void dgap_tty_start(struct tty_struct *tty);
+static void dgap_tty_stop(struct tty_struct *tty);
+static void dgap_tty_throttle(struct tty_struct *tty);
+static void dgap_tty_unthrottle(struct tty_struct *tty);
+static void dgap_tty_flush_chars(struct tty_struct *tty);
+static void dgap_tty_flush_buffer(struct tty_struct *tty);
+static void dgap_tty_hangup(struct tty_struct *tty);
+static int dgap_wait_for_drain(struct tty_struct *tty);
+static int dgap_set_modem_info(struct tty_struct *tty, unsigned int command, unsigned int __user *value);
+static int dgap_get_modem_info(struct channel_t *ch, unsigned int __user *value);
+static int dgap_tty_digisetcustombaud(struct tty_struct *tty, int __user *new_info);
+static int dgap_tty_digigetcustombaud(struct tty_struct *tty, int __user *retinfo);
+static int dgap_tty_tiocmget(struct tty_struct *tty);
+static int dgap_tty_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear);
+static int dgap_tty_send_break(struct tty_struct *tty, int msec);
+static void dgap_tty_wait_until_sent(struct tty_struct *tty, int timeout);
+static int dgap_tty_write(struct tty_struct *tty, const unsigned char *buf, int count);
+static void dgap_tty_set_termios(struct tty_struct *tty, struct ktermios *old_termios);
+static int dgap_tty_put_char(struct tty_struct *tty, unsigned char c);
+static void dgap_tty_send_xchar(struct tty_struct *tty, char ch);
+
/* Driver load/unload functions */
int dgap_init_module(void);
void dgap_cleanup_module(void);
static struct class * dgap_class;
+static struct board_t *dgap_BoardsByMajor[256];
+static uchar *dgap_TmpWriteBuf = NULL;
+static DECLARE_MUTEX(dgap_TmpWriteSem);
+
/*
* Poller stuff
*/
"Driver Ready."
};
+/*
+ * Default transparent print information.
+ */
+static struct digi_t dgap_digi_init = {
+ .digi_flags = DIGI_COOK, /* Flags */
+ .digi_maxcps = 100, /* Max CPS */
+ .digi_maxchar = 50, /* Max chars in print queue */
+ .digi_bufsize = 100, /* Printer buffer size */
+ .digi_onlen = 4, /* size of printer on string */
+ .digi_offlen = 4, /* size of printer off string */
+ .digi_onstr = "\033[5i", /* ANSI printer on string ] */
+ .digi_offstr = "\033[4i", /* ANSI printer off string ] */
+ .digi_term = "ansi" /* default terminal type */
+};
+
+
+/*
+ * Define a local default termios struct. All ports will be created
+ * with this termios initially.
+ *
+ * This defines a raw port at 9600 baud, 8 data bits, no parity,
+ * 1 stop bit.
+ */
+
+static struct ktermios DgapDefaultTermios =
+{
+ .c_iflag = (DEFAULT_IFLAGS), /* iflags */
+ .c_oflag = (DEFAULT_OFLAGS), /* oflags */
+ .c_cflag = (DEFAULT_CFLAGS), /* cflags */
+ .c_lflag = (DEFAULT_LFLAGS), /* lflags */
+ .c_cc = INIT_C_CC,
+ .c_line = 0,
+};
+
+static const struct tty_operations dgap_tty_ops = {
+ .open = dgap_tty_open,
+ .close = dgap_tty_close,
+ .write = dgap_tty_write,
+ .write_room = dgap_tty_write_room,
+ .flush_buffer = dgap_tty_flush_buffer,
+ .chars_in_buffer = dgap_tty_chars_in_buffer,
+ .flush_chars = dgap_tty_flush_chars,
+ .ioctl = dgap_tty_ioctl,
+ .set_termios = dgap_tty_set_termios,
+ .stop = dgap_tty_stop,
+ .start = dgap_tty_start,
+ .throttle = dgap_tty_throttle,
+ .unthrottle = dgap_tty_unthrottle,
+ .hangup = dgap_tty_hangup,
+ .put_char = dgap_tty_put_char,
+ .tiocmget = dgap_tty_tiocmget,
+ .tiocmset = dgap_tty_tiocmset,
+ .break_ctl = dgap_tty_send_break,
+ .wait_until_sent = dgap_tty_wait_until_sent,
+ .send_xchar = dgap_tty_send_xchar
+};
/************************************************************************
default: return("unknown");
}
}
+
+/************************************************************************
+ *
+ * TTY Initialization/Cleanup Functions
+ *
+ ************************************************************************/
+
+/*
+ * dgap_tty_preinit()
+ *
+ * Initialize any global tty related data before we download any boards.
+ */
+int dgap_tty_preinit(void)
+{
+ unsigned long flags;
+
+ DGAP_LOCK(dgap_global_lock, flags);
+
+ /*
+ * Allocate a buffer for doing the copy from user space to
+ * kernel space in dgap_input(). We only use one buffer and
+ * control access to it with a semaphore. If we are paging, we
+ * are already in trouble so one buffer won't hurt much anyway.
+ */
+ dgap_TmpWriteBuf = kmalloc(WRITEBUFLEN, GFP_ATOMIC);
+
+ if (!dgap_TmpWriteBuf) {
+ DGAP_UNLOCK(dgap_global_lock, flags);
+ DPR_INIT(("unable to allocate tmp write buf"));
+ return (-ENOMEM);
+ }
+
+ DGAP_UNLOCK(dgap_global_lock, flags);
+ return(0);
+}
+
+
+/*
+ * dgap_tty_register()
+ *
+ * Init the tty subsystem for this board.
+ */
+int dgap_tty_register(struct board_t *brd)
+{
+ int rc = 0;
+
+ DPR_INIT(("tty_register start"));
+
+ brd->SerialDriver = alloc_tty_driver(MAXPORTS);
+
+ snprintf(brd->SerialName, MAXTTYNAMELEN, "tty_dgap_%d_", brd->boardnum);
+ brd->SerialDriver->name = brd->SerialName;
+ brd->SerialDriver->name_base = 0;
+ brd->SerialDriver->major = 0;
+ brd->SerialDriver->minor_start = 0;
+ brd->SerialDriver->type = TTY_DRIVER_TYPE_SERIAL;
+ brd->SerialDriver->subtype = SERIAL_TYPE_NORMAL;
+ brd->SerialDriver->init_termios = DgapDefaultTermios;
+ brd->SerialDriver->driver_name = DRVSTR;
+ brd->SerialDriver->flags = (TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV | TTY_DRIVER_HARDWARE_BREAK);
+
+ /* The kernel wants space to store pointers to tty_structs */
+ brd->SerialDriver->ttys = kzalloc(MAXPORTS * sizeof(struct tty_struct *), GFP_KERNEL);
+ if (!brd->SerialDriver->ttys)
+ return(-ENOMEM);
+
+ /*
+ * Entry points for driver. Called by the kernel from
+ * tty_io.c and n_tty.c.
+ */
+ tty_set_operations(brd->SerialDriver, &dgap_tty_ops);
+
+ /*
+ * If we're doing transparent print, we have to do all of the above
+ * again, separately so we don't get the LD confused about what major
+ * we are when we get into the dgap_tty_open() routine.
+ */
+ brd->PrintDriver = alloc_tty_driver(MAXPORTS);
+
+ snprintf(brd->PrintName, MAXTTYNAMELEN, "pr_dgap_%d_", brd->boardnum);
+ brd->PrintDriver->name = brd->PrintName;
+ brd->PrintDriver->name_base = 0;
+ brd->PrintDriver->major = 0;
+ brd->PrintDriver->minor_start = 0;
+ brd->PrintDriver->type = TTY_DRIVER_TYPE_SERIAL;
+ brd->PrintDriver->subtype = SERIAL_TYPE_NORMAL;
+ brd->PrintDriver->init_termios = DgapDefaultTermios;
+ brd->PrintDriver->driver_name = DRVSTR;
+ brd->PrintDriver->flags = (TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV | TTY_DRIVER_HARDWARE_BREAK);
+
+ /* The kernel wants space to store pointers to tty_structs */
+ brd->PrintDriver->ttys = kzalloc(MAXPORTS * sizeof(struct tty_struct *), GFP_KERNEL);
+ if (!brd->PrintDriver->ttys)
+ return(-ENOMEM);
+
+ /*
+ * Entry points for driver. Called by the kernel from
+ * tty_io.c and n_tty.c.
+ */
+ tty_set_operations(brd->PrintDriver, &dgap_tty_ops);
+
+ if (!brd->dgap_Major_Serial_Registered) {
+ /* Register tty devices */
+ rc = tty_register_driver(brd->SerialDriver);
+ if (rc < 0) {
+ APR(("Can't register tty device (%d)\n", rc));
+ return(rc);
+ }
+ brd->dgap_Major_Serial_Registered = TRUE;
+ dgap_BoardsByMajor[brd->SerialDriver->major] = brd;
+ brd->dgap_Serial_Major = brd->SerialDriver->major;
+ }
+
+ if (!brd->dgap_Major_TransparentPrint_Registered) {
+ /* Register Transparent Print devices */
+ rc = tty_register_driver(brd->PrintDriver);
+ if (rc < 0) {
+ APR(("Can't register Transparent Print device (%d)\n", rc));
+ return(rc);
+ }
+ brd->dgap_Major_TransparentPrint_Registered = TRUE;
+ dgap_BoardsByMajor[brd->PrintDriver->major] = brd;
+ brd->dgap_TransparentPrint_Major = brd->PrintDriver->major;
+ }
+
+ DPR_INIT(("DGAP REGISTER TTY: MAJORS: %d %d\n", brd->SerialDriver->major,
+ brd->PrintDriver->major));
+
+ return (rc);
+}
+
+
+/*
+ * dgap_tty_init()
+ *
+ * Init the tty subsystem. Called once per board after board has been
+ * downloaded and init'ed.
+ */
+int dgap_tty_init(struct board_t *brd)
+{
+ int i;
+ int tlw;
+ uint true_count = 0;
+ uchar *vaddr;
+ uchar modem = 0;
+ struct channel_t *ch;
+ struct bs_t *bs;
+ struct cm_t *cm;
+
+ if (!brd)
+ return (-ENXIO);
+
+ DPR_INIT(("dgap_tty_init start\n"));
+
+ /*
+ * Initialize board structure elements.
+ */
+
+ vaddr = brd->re_map_membase;
+ true_count = readw((vaddr + NCHAN));
+
+ brd->nasync = dgap_config_get_number_of_ports(brd);
+
+ if (!brd->nasync) {
+ brd->nasync = brd->maxports;
+ }
+
+ if (brd->nasync > brd->maxports) {
+ brd->nasync = brd->maxports;
+ }
+
+ if (true_count != brd->nasync) {
+ if ((brd->type == PPCM) && (true_count == 64)) {
+ APR(("***WARNING**** %s configured for %d ports, has %d ports.\nPlease make SURE the EBI cable running from the card\nto each EM module is plugged into EBI IN!\n",
+ brd->name, brd->nasync, true_count));
+ }
+ else if ((brd->type == PPCM) && (true_count == 0)) {
+ APR(("***WARNING**** %s configured for %d ports, has %d ports.\nPlease make SURE the EBI cable running from the card\nto each EM module is plugged into EBI IN!\n",
+ brd->name, brd->nasync, true_count));
+ }
+ else {
+ APR(("***WARNING**** %s configured for %d ports, has %d ports.\n",
+ brd->name, brd->nasync, true_count));
+ }
+
+ brd->nasync = true_count;
+
+ /* If no ports, don't bother going any further */
+ if (!brd->nasync) {
+ brd->state = BOARD_FAILED;
+ brd->dpastatus = BD_NOFEP;
+ return(-ENXIO);
+ }
+ }
+
+ /*
+ * Allocate channel memory that might not have been allocated
+ * when the driver was first loaded.
+ */
+ for (i = 0; i < brd->nasync; i++) {
+ if (!brd->channels[i]) {
+ brd->channels[i] = kzalloc(sizeof(struct channel_t), GFP_ATOMIC);
+ if (!brd->channels[i]) {
+ DPR_CORE(("%s:%d Unable to allocate memory for channel struct\n",
+ __FILE__, __LINE__));
+ }
+ }
+ }
+
+ ch = brd->channels[0];
+ vaddr = brd->re_map_membase;
+
+ bs = (struct bs_t *) ((ulong) vaddr + CHANBUF);
+ cm = (struct cm_t *) ((ulong) vaddr + CMDBUF);
+
+ brd->bd_bs = bs;
+
+ /* Set up channel variables */
+ for (i = 0; i < brd->nasync; i++, ch = brd->channels[i], bs++) {
+
+ if (!brd->channels[i])
+ continue;
+
+ DGAP_SPINLOCK_INIT(ch->ch_lock);
+
+ /* Store all our magic numbers */
+ ch->magic = DGAP_CHANNEL_MAGIC;
+ ch->ch_tun.magic = DGAP_UNIT_MAGIC;
+ ch->ch_tun.un_type = DGAP_SERIAL;
+ ch->ch_tun.un_ch = ch;
+ ch->ch_tun.un_dev = i;
+
+ ch->ch_pun.magic = DGAP_UNIT_MAGIC;
+ ch->ch_pun.un_type = DGAP_PRINT;
+ ch->ch_pun.un_ch = ch;
+ ch->ch_pun.un_dev = i;
+
+ ch->ch_vaddr = vaddr;
+ ch->ch_bs = bs;
+ ch->ch_cm = cm;
+ ch->ch_bd = brd;
+ ch->ch_portnum = i;
+ ch->ch_digi = dgap_digi_init;
+
+ /*
+ * Set up digi dsr and dcd bits based on altpin flag.
+ */
+ if (dgap_config_get_altpin(brd)) {
+ ch->ch_dsr = DM_CD;
+ ch->ch_cd = DM_DSR;
+ ch->ch_digi.digi_flags |= DIGI_ALTPIN;
+ }
+ else {
+ ch->ch_cd = DM_CD;
+ ch->ch_dsr = DM_DSR;
+ }
+
+ ch->ch_taddr = vaddr + ((ch->ch_bs->tx_seg) << 4);
+ ch->ch_raddr = vaddr + ((ch->ch_bs->rx_seg) << 4);
+ ch->ch_tx_win = 0;
+ ch->ch_rx_win = 0;
+ ch->ch_tsize = readw(&(ch->ch_bs->tx_max)) + 1;
+ ch->ch_rsize = readw(&(ch->ch_bs->rx_max)) + 1;
+ ch->ch_tstart = 0;
+ ch->ch_rstart = 0;
+
+ /* .25 second delay */
+ ch->ch_close_delay = 250;
+
+ /*
+ * Set queue water marks, interrupt mask,
+ * and general tty parameters.
+ */
+ ch->ch_tlw = tlw = ch->ch_tsize >= 2000 ? ((ch->ch_tsize * 5) / 8) : ch->ch_tsize / 2;
+
+ dgap_cmdw(ch, STLOW, tlw, 0);
+
+ dgap_cmdw(ch, SRLOW, ch->ch_rsize / 2, 0);
+
+ dgap_cmdw(ch, SRHIGH, 7 * ch->ch_rsize / 8, 0);
+
+ ch->ch_mistat = readb(&(ch->ch_bs->m_stat));
+
+ init_waitqueue_head(&ch->ch_flags_wait);
+ init_waitqueue_head(&ch->ch_tun.un_flags_wait);
+ init_waitqueue_head(&ch->ch_pun.un_flags_wait);
+ init_waitqueue_head(&ch->ch_sniff_wait);
+
+ /* Turn on all modem interrupts for now */
+ modem = (DM_CD | DM_DSR | DM_CTS | DM_RI);
+ writeb(modem, &(ch->ch_bs->m_int));
+
+ /*
+ * Set edelay to 0 if interrupts are turned on,
+ * otherwise set edelay to the usual 100.
+ */
+ if (brd->intr_used)
+ writew(0, &(ch->ch_bs->edelay));
+ else
+ writew(100, &(ch->ch_bs->edelay));
+
+ writeb(1, &(ch->ch_bs->idata));
+ }
+
+
+ DPR_INIT(("dgap_tty_init finish\n"));
+
+ return (0);
+}
+
+
+/*
+ * dgap_tty_post_uninit()
+ *
+ * UnInitialize any global tty related data.
+ */
+void dgap_tty_post_uninit(void)
+{
+ kfree(dgap_TmpWriteBuf);
+ dgap_TmpWriteBuf = NULL;
+}
+
+
+/*
+ * dgap_tty_uninit()
+ *
+ * Uninitialize the TTY portion of this driver. Free all memory and
+ * resources.
+ */
+void dgap_tty_uninit(struct board_t *brd)
+{
+ int i = 0;
+
+ if (brd->dgap_Major_Serial_Registered) {
+ dgap_BoardsByMajor[brd->SerialDriver->major] = NULL;
+ brd->dgap_Serial_Major = 0;
+ for (i = 0; i < brd->nasync; i++) {
+ dgap_remove_tty_sysfs(brd->channels[i]->ch_tun.un_sysfs);
+ tty_unregister_device(brd->SerialDriver, i);
+ }
+ tty_unregister_driver(brd->SerialDriver);
+ kfree(brd->SerialDriver->ttys);
+ brd->SerialDriver->ttys = NULL;
+ put_tty_driver(brd->SerialDriver);
+ brd->dgap_Major_Serial_Registered = FALSE;
+ }
+
+ if (brd->dgap_Major_TransparentPrint_Registered) {
+ dgap_BoardsByMajor[brd->PrintDriver->major] = NULL;
+ brd->dgap_TransparentPrint_Major = 0;
+ for (i = 0; i < brd->nasync; i++) {
+ dgap_remove_tty_sysfs(brd->channels[i]->ch_pun.un_sysfs);
+ tty_unregister_device(brd->PrintDriver, i);
+ }
+ tty_unregister_driver(brd->PrintDriver);
+ kfree(brd->PrintDriver->ttys);
+ brd->PrintDriver->ttys = NULL;
+ put_tty_driver(brd->PrintDriver);
+ brd->dgap_Major_TransparentPrint_Registered = FALSE;
+ }
+}
+
+
+#define TMPBUFLEN (1024)
+
+/*
+ * dgap_sniff - Dump data out to the "sniff" buffer if the
+ * proc sniff file is opened...
+ */
+static void dgap_sniff_nowait_nolock(struct channel_t *ch, uchar *text, uchar *buf, int len)
+{
+ struct timeval tv;
+ int n;
+ int r;
+ int nbuf;
+ int i;
+ int tmpbuflen;
+ char tmpbuf[TMPBUFLEN];
+ char *p = tmpbuf;
+ int too_much_data;
+
+ /* Leave if sniff not open */
+ if (!(ch->ch_sniff_flags & SNIFF_OPEN))
+ return;
+
+ do_gettimeofday(&tv);
+
+ /* Create our header for data dump */
+ p += sprintf(p, "<%ld %ld><%s><", tv.tv_sec, tv.tv_usec, text);
+ tmpbuflen = p - tmpbuf;
+
+ do {
+ too_much_data = 0;
+
+ for (i = 0; i < len && tmpbuflen < (TMPBUFLEN - 4); i++) {
+ p += sprintf(p, "%02x ", *buf);
+ buf++;
+ tmpbuflen = p - tmpbuf;
+ }
+
+ if (tmpbuflen < (TMPBUFLEN - 4)) {
+ if (i > 0)
+ p += sprintf(p - 1, "%s\n", ">");
+ else
+ p += sprintf(p, "%s\n", ">");
+ } else {
+ too_much_data = 1;
+ len -= i;
+ }
+
+ nbuf = strlen(tmpbuf);
+ p = tmpbuf;
+
+ /*
+ * Loop while data remains.
+ */
+ while (nbuf > 0 && ch->ch_sniff_buf) {
+ /*
+ * Determine the amount of available space left in the
+ * buffer. If there's none, wait until some appears.
+ */
+ n = (ch->ch_sniff_out - ch->ch_sniff_in - 1) & SNIFF_MASK;
+
+ /*
+ * If there is no space left to write to in our sniff buffer,
+ * we have no choice but to drop the data.
+ * We *cannot* sleep here waiting for space, because this
+ * function was probably called by the interrupt/timer routines!
+ */
+ if (n == 0) {
+ return;
+ }
+
+ /*
+ * Copy as much data as will fit.
+ */
+
+ if (n > nbuf)
+ n = nbuf;
+
+ r = SNIFF_MAX - ch->ch_sniff_in;
+
+ if (r <= n) {
+ memcpy(ch->ch_sniff_buf + ch->ch_sniff_in, p, r);
+
+ n -= r;
+ ch->ch_sniff_in = 0;
+ p += r;
+ nbuf -= r;
+ }
+
+ memcpy(ch->ch_sniff_buf + ch->ch_sniff_in, p, n);
+
+ ch->ch_sniff_in += n;
+ p += n;
+ nbuf -= n;
+
+ /*
+ * Wakeup any thread waiting for data
+ */
+ if (ch->ch_sniff_flags & SNIFF_WAIT_DATA) {
+ ch->ch_sniff_flags &= ~SNIFF_WAIT_DATA;
+ wake_up_interruptible(&ch->ch_sniff_wait);
+ }
+ }
+
+ /*
+ * If the user sent us too much data to push into our tmpbuf,
+ * we need to keep looping around on all the data.
+ */
+ if (too_much_data) {
+ p = tmpbuf;
+ tmpbuflen = 0;
+ }
+
+ } while (too_much_data);
+}
+
+
+/*=======================================================================
+ *
+ * dgap_input - Process received data.
+ *
+ * ch - Pointer to channel structure.
+ *
+ *=======================================================================*/
+
+void dgap_input(struct channel_t *ch)
+{
+ struct board_t *bd;
+ struct bs_t *bs;
+ struct tty_struct *tp;
+ struct tty_ldisc *ld;
+ uint rmask;
+ uint head;
+ uint tail;
+ int data_len;
+ ulong lock_flags;
+ ulong lock_flags2;
+ int flip_len;
+ int len = 0;
+ int n = 0;
+ uchar *buf;
+ uchar tmpchar;
+ int s = 0;
+
+ if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
+ return;
+
+ tp = ch->ch_tun.un_tty;
+
+ bs = ch->ch_bs;
+ if (!bs) {
+ return;
+ }
+
+ bd = ch->ch_bd;
+ if(!bd || bd->magic != DGAP_BOARD_MAGIC)
+ return;
+
+ DPR_READ(("dgap_input start\n"));
+
+ DGAP_LOCK(bd->bd_lock, lock_flags);
+ DGAP_LOCK(ch->ch_lock, lock_flags2);
+
+ /*
+ * Figure the number of characters in the buffer.
+ * Exit immediately if none.
+ */
+
+ rmask = ch->ch_rsize - 1;
+
+ head = readw(&(bs->rx_head));
+ head &= rmask;
+ tail = readw(&(bs->rx_tail));
+ tail &= rmask;
+
+ data_len = (head - tail) & rmask;
+
+ if (data_len == 0) {
+ writeb(1, &(bs->idata));
+ DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+ DGAP_UNLOCK(bd->bd_lock, lock_flags);
+ DPR_READ(("No data on port %d\n", ch->ch_portnum));
+ return;
+ }
+
+ /*
+ * If the device is not open, or CREAD is off, flush
+ * input data and return immediately.
+ */
+ if ((bd->state != BOARD_READY) || !tp || (tp->magic != TTY_MAGIC) ||
+ !(ch->ch_tun.un_flags & UN_ISOPEN) || !(tp->termios.c_cflag & CREAD) ||
+ (ch->ch_tun.un_flags & UN_CLOSING)) {
+
+ DPR_READ(("input. dropping %d bytes on port %d...\n", data_len, ch->ch_portnum));
+ DPR_READ(("input. tp: %p tp->magic: %x MAGIC:%x ch flags: %x\n",
+ tp, tp ? tp->magic : 0, TTY_MAGIC, ch->ch_tun.un_flags));
+ writew(head, &(bs->rx_tail));
+ writeb(1, &(bs->idata));
+ DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+ DGAP_UNLOCK(bd->bd_lock, lock_flags);
+ return;
+ }
+
+ /*
+ * If we are throttled, simply don't read any data.
+ */
+ if (ch->ch_flags & CH_RXBLOCK) {
+ writeb(1, &(bs->idata));
+ DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+ DGAP_UNLOCK(bd->bd_lock, lock_flags);
+ DPR_READ(("Port %d throttled, not reading any data. head: %x tail: %x\n",
+ ch->ch_portnum, head, tail));
+ return;
+ }
+
+ /*
+ * Ignore oruns.
+ */
+ tmpchar = readb(&(bs->orun));
+ if (tmpchar) {
+ ch->ch_err_overrun++;
+ writeb(0, &(bs->orun));
+ }
+
+ DPR_READ(("dgap_input start 2\n"));
+
+ /* Decide how much data we can send into the tty layer */
+ flip_len = TTY_FLIPBUF_SIZE;
+
+ /* Chop down the length, if needed */
+ len = min(data_len, flip_len);
+ len = min(len, (N_TTY_BUF_SIZE - 1));
+
+ ld = tty_ldisc_ref(tp);
+
+#ifdef TTY_DONT_FLIP
+ /*
+ * If the DONT_FLIP flag is on, don't flush our buffer, and act
+ * like the ld doesn't have any space to put the data right now.
+ */
+ if (test_bit(TTY_DONT_FLIP, &tp->flags))
+ len = 0;
+#endif
+
+ /*
+ * If we were unable to get a reference to the ld,
+ * don't flush our buffer, and act like the ld doesn't
+ * have any space to put the data right now.
+ */
+ if (!ld) {
+ len = 0;
+ } else {
+ /*
+ * If ld doesn't have a pointer to a receive_buf function,
+ * flush the data, then act like the ld doesn't have any
+ * space to put the data right now.
+ */
+ if (!ld->ops->receive_buf) {
+ writew(head, &(bs->rx_tail));
+ len = 0;
+ }
+ }
+
+ if (len <= 0) {
+ writeb(1, &(bs->idata));
+ DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+ DGAP_UNLOCK(bd->bd_lock, lock_flags);
+ DPR_READ(("dgap_input 1 - finish\n"));
+ if (ld)
+ tty_ldisc_deref(ld);
+ return;
+ }
+
+ buf = ch->ch_bd->flipbuf;
+ n = len;
+
+ /*
+ * n now contains the most amount of data we can copy,
+ * bounded either by our buffer size or the amount
+ * of data the card actually has pending...
+ */
+ while (n) {
+
+ s = ((head >= tail) ? head : ch->ch_rsize) - tail;
+ s = min(s, n);
+
+ if (s <= 0)
+ break;
+
+ memcpy_fromio(buf, (char *) ch->ch_raddr + tail, s);
+ dgap_sniff_nowait_nolock(ch, "USER READ", buf, s);
+
+ tail += s;
+ buf += s;
+
+ n -= s;
+ /* Flip queue if needed */
+ tail &= rmask;
+ }
+
+ writew(tail, &(bs->rx_tail));
+ writeb(1, &(bs->idata));
+ ch->ch_rxcount += len;
+
+ /*
+ * If we are completely raw, we don't need to go through a lot
+ * of the tty layers that exist.
+ * In this case, we take the shortest and fastest route we
+ * can to relay the data to the user.
+ *
+ * On the other hand, if we are not raw, we need to go through
+ * the tty layer, which has its API more well defined.
+ */
+ if (I_PARMRK(tp) || I_BRKINT(tp) || I_INPCK(tp)) {
+ dgap_parity_scan(ch, ch->ch_bd->flipbuf, ch->ch_bd->flipflagbuf, &len);
+
+ len = tty_buffer_request_room(tp->port, len);
+ tty_insert_flip_string_flags(tp->port, ch->ch_bd->flipbuf,
+ ch->ch_bd->flipflagbuf, len);
+ }
+ else {
+ len = tty_buffer_request_room(tp->port, len);
+ tty_insert_flip_string(tp->port, ch->ch_bd->flipbuf, len);
+ }
+
+ DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+ DGAP_UNLOCK(bd->bd_lock, lock_flags);
+
+ /* Tell the tty layer its okay to "eat" the data now */
+ tty_flip_buffer_push(tp->port);
+
+ if (ld)
+ tty_ldisc_deref(ld);
+
+ DPR_READ(("dgap_input - finish\n"));
+}
+
+
+/************************************************************************
+ * Determines when CARRIER changes state and takes appropriate
+ * action.
+ ************************************************************************/
+void dgap_carrier(struct channel_t *ch)
+{
+ struct board_t *bd;
+
+ int virt_carrier = 0;
+ int phys_carrier = 0;
+
+ DPR_CARR(("dgap_carrier called...\n"));
+
+ if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
+ return;
+
+ bd = ch->ch_bd;
+
+ if (!bd || bd->magic != DGAP_BOARD_MAGIC)
+ return;
+
+ /* Make sure altpin is always set correctly */
+ if (ch->ch_digi.digi_flags & DIGI_ALTPIN) {
+ ch->ch_dsr = DM_CD;
+ ch->ch_cd = DM_DSR;
+ }
+ else {
+ ch->ch_dsr = DM_DSR;
+ ch->ch_cd = DM_CD;
+ }
+
+ if (ch->ch_mistat & D_CD(ch)) {
+ DPR_CARR(("mistat: %x D_CD: %x\n", ch->ch_mistat, D_CD(ch)));
+ phys_carrier = 1;
+ }
+
+ if (ch->ch_digi.digi_flags & DIGI_FORCEDCD) {
+ virt_carrier = 1;
+ }
+
+ if (ch->ch_c_cflag & CLOCAL) {
+ virt_carrier = 1;
+ }
+
+
+ DPR_CARR(("DCD: physical: %d virt: %d\n", phys_carrier, virt_carrier));
+
+ /*
+ * Test for a VIRTUAL carrier transition to HIGH.
+ */
+ if (((ch->ch_flags & CH_FCAR) == 0) && (virt_carrier == 1)) {
+
+ /*
+ * When carrier rises, wake any threads waiting
+ * for carrier in the open routine.
+ */
+
+ DPR_CARR(("carrier: virt DCD rose\n"));
+
+ if (waitqueue_active(&(ch->ch_flags_wait)))
+ wake_up_interruptible(&ch->ch_flags_wait);
+ }
+
+ /*
+ * Test for a PHYSICAL carrier transition to HIGH.
+ */
+ if (((ch->ch_flags & CH_CD) == 0) && (phys_carrier == 1)) {
+
+ /*
+ * When carrier rises, wake any threads waiting
+ * for carrier in the open routine.
+ */
+
+ DPR_CARR(("carrier: physical DCD rose\n"));
+
+ if (waitqueue_active(&(ch->ch_flags_wait)))
+ wake_up_interruptible(&ch->ch_flags_wait);
+ }
+
+ /*
+ * Test for a PHYSICAL transition to low, so long as we aren't
+ * currently ignoring physical transitions (which is what "virtual
+ * carrier" indicates).
+ *
+ * The transition of the virtual carrier to low really doesn't
+ * matter... it really only means "ignore carrier state", not
+ * "make pretend that carrier is there".
+ */
+ if ((virt_carrier == 0) && ((ch->ch_flags & CH_CD) != 0) &&
+ (phys_carrier == 0))
+ {
+
+ /*
+ * When carrier drops:
+ *
+ * Drop carrier on all open units.
+ *
+ * Flush queues, waking up any task waiting in the
+ * line discipline.
+ *
+ * Send a hangup to the control terminal.
+ *
+ * Enable all select calls.
+ */
+ if (waitqueue_active(&(ch->ch_flags_wait)))
+ wake_up_interruptible(&ch->ch_flags_wait);
+
+ if (ch->ch_tun.un_open_count > 0) {
+ DPR_CARR(("Sending tty hangup\n"));
+ tty_hangup(ch->ch_tun.un_tty);
+ }
+
+ if (ch->ch_pun.un_open_count > 0) {
+ DPR_CARR(("Sending pr hangup\n"));
+ tty_hangup(ch->ch_pun.un_tty);
+ }
+ }
+
+ /*
+ * Make sure that our cached values reflect the current reality.
+ */
+ if (virt_carrier == 1)
+ ch->ch_flags |= CH_FCAR;
+ else
+ ch->ch_flags &= ~CH_FCAR;
+
+ if (phys_carrier == 1)
+ ch->ch_flags |= CH_CD;
+ else
+ ch->ch_flags &= ~CH_CD;
+}
+
+
+/************************************************************************
+ *
+ * TTY Entry points and helper functions
+ *
+ ************************************************************************/
+
+/*
+ * dgap_tty_open()
+ *
+ */
+static int dgap_tty_open(struct tty_struct *tty, struct file *file)
+{
+ struct board_t *brd;
+ struct channel_t *ch;
+ struct un_t *un;
+ struct bs_t *bs;
+ uint major = 0;
+ uint minor = 0;
+ int rc = 0;
+ ulong lock_flags;
+ ulong lock_flags2;
+ u16 head;
+
+ rc = 0;
+
+ major = MAJOR(tty_devnum(tty));
+ minor = MINOR(tty_devnum(tty));
+
+ if (major > 255) {
+ return -ENXIO;
+ }
+
+ /* Get board pointer from our array of majors we have allocated */
+ brd = dgap_BoardsByMajor[major];
+ if (!brd) {
+ return -ENXIO;
+ }
+
+ /*
+ * If board is not yet up to a state of READY, go to
+ * sleep waiting for it to happen or they cancel the open.
+ */
+ rc = wait_event_interruptible(brd->state_wait,
+ (brd->state & BOARD_READY));
+
+ if (rc) {
+ return rc;
+ }
+
+ DGAP_LOCK(brd->bd_lock, lock_flags);
+
+ /* The wait above should guarantee this cannot happen */
+ if (brd->state != BOARD_READY) {
+ DGAP_UNLOCK(brd->bd_lock, lock_flags);
+ return -ENXIO;
+ }
+
+ /* If opened device is greater than our number of ports, bail. */
+ if (MINOR(tty_devnum(tty)) > brd->nasync) {
+ DGAP_UNLOCK(brd->bd_lock, lock_flags);
+ return -ENXIO;
+ }
+
+ ch = brd->channels[minor];
+ if (!ch) {
+ DGAP_UNLOCK(brd->bd_lock, lock_flags);
+ return -ENXIO;
+ }
+
+ /* Grab channel lock */
+ DGAP_LOCK(ch->ch_lock, lock_flags2);
+
+ /* Figure out our type */
+ if (major == brd->dgap_Serial_Major) {
+ un = &brd->channels[minor]->ch_tun;
+ un->un_type = DGAP_SERIAL;
+ }
+ else if (major == brd->dgap_TransparentPrint_Major) {
+ un = &brd->channels[minor]->ch_pun;
+ un->un_type = DGAP_PRINT;
+ }
+ else {
+ DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+ DGAP_UNLOCK(brd->bd_lock, lock_flags);
+ DPR_OPEN(("%d Unknown TYPE!\n", __LINE__));
+ return -ENXIO;
+ }
+
+ /* Store our unit into driver_data, so we always have it available. */
+ tty->driver_data = un;
+
+ DPR_OPEN(("Open called. MAJOR: %d MINOR:%d unit: %p NAME: %s\n",
+ MAJOR(tty_devnum(tty)), MINOR(tty_devnum(tty)), un, brd->name));
+
+ /*
+ * Error if channel info pointer is NULL.
+ */
+ bs = ch->ch_bs;
+ if (!bs) {
+ DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+ DGAP_UNLOCK(brd->bd_lock, lock_flags);
+ DPR_OPEN(("%d BS is 0!\n", __LINE__));
+ return -ENXIO;
+ }
+
+ DPR_OPEN(("%d: tflag=%x pflag=%x\n", __LINE__, ch->ch_tun.un_flags, ch->ch_pun.un_flags));
+
+ /*
+ * Initialize tty's
+ */
+ if (!(un->un_flags & UN_ISOPEN)) {
+ /* Store important variables. */
+ un->un_tty = tty;
+
+ /* Maybe do something here to the TTY struct as well? */
+ }
+
+ /*
+ * Initialize if neither terminal or printer is open.
+ */
+ if (!((ch->ch_tun.un_flags | ch->ch_pun.un_flags) & UN_ISOPEN)) {
+
+ DPR_OPEN(("dgap_open: initializing channel in open...\n"));
+
+ ch->ch_mforce = 0;
+ ch->ch_mval = 0;
+
+ /*
+ * Flush input queue.
+ */
+ head = readw(&(bs->rx_head));
+ writew(head, &(bs->rx_tail));
+
+ ch->ch_flags = 0;
+ ch->pscan_state = 0;
+ ch->pscan_savechar = 0;
+
+ ch->ch_c_cflag = tty->termios.c_cflag;
+ ch->ch_c_iflag = tty->termios.c_iflag;
+ ch->ch_c_oflag = tty->termios.c_oflag;
+ ch->ch_c_lflag = tty->termios.c_lflag;
+ ch->ch_startc = tty->termios.c_cc[VSTART];
+ ch->ch_stopc = tty->termios.c_cc[VSTOP];
+
+ /* TODO: flush our TTY struct here? */
+ }
+
+ dgap_carrier(ch);
+ /*
+ * Run param in case we changed anything
+ */
+ dgap_param(tty);
+
+ /*
+ * follow protocol for opening port
+ */
+
+ DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+ DGAP_UNLOCK(brd->bd_lock, lock_flags);
+
+ rc = dgap_block_til_ready(tty, file, ch);
+
+ if (!un->un_tty) {
+ return -ENODEV;
+ }
+
+ if (rc) {
+ DPR_OPEN(("dgap_tty_open returning after dgap_block_til_ready "
+ "with %d\n", rc));
+ }
+
+ /* No going back now, increment our unit and channel counters */
+ DGAP_LOCK(ch->ch_lock, lock_flags);
+ ch->ch_open_count++;
+ un->un_open_count++;
+ un->un_flags |= (UN_ISOPEN);
+ DGAP_UNLOCK(ch->ch_lock, lock_flags);
+
+ DPR_OPEN(("dgap_tty_open finished\n"));
+ return (rc);
+}
+
+
+/*
+ * dgap_block_til_ready()
+ *
+ * Wait for DCD, if needed.
+ */
+static int dgap_block_til_ready(struct tty_struct *tty, struct file *file, struct channel_t *ch)
+{
+ int retval = 0;
+ struct un_t *un = NULL;
+ ulong lock_flags;
+ uint old_flags = 0;
+ int sleep_on_un_flags = 0;
+
+ if (!tty || tty->magic != TTY_MAGIC || !file || !ch || ch->magic != DGAP_CHANNEL_MAGIC) {
+ return (-ENXIO);
+ }
+
+ un = tty->driver_data;
+ if (!un || un->magic != DGAP_UNIT_MAGIC) {
+ return (-ENXIO);
+ }
+
+ DPR_OPEN(("dgap_block_til_ready - before block.\n"));
+
+ DGAP_LOCK(ch->ch_lock, lock_flags);
+
+ ch->ch_wopen++;
+
+ /* Loop forever */
+ while (1) {
+
+ sleep_on_un_flags = 0;
+
+ /*
+ * If board has failed somehow during our sleep, bail with error.
+ */
+ if (ch->ch_bd->state == BOARD_FAILED) {
+ retval = -ENXIO;
+ break;
+ }
+
+ /* If tty was hung up, break out of loop and set error. */
+ if (tty_hung_up_p(file)) {
+ retval = -EAGAIN;
+ break;
+ }
+
+ /*
+ * If either unit is in the middle of the fragile part of close,
+ * we just cannot touch the channel safely.
+ * Go back to sleep, knowing that when the channel can be
+ * touched safely, the close routine will signal the
+ * ch_wait_flags to wake us back up.
+ */
+ if (!((ch->ch_tun.un_flags | ch->ch_pun.un_flags) & UN_CLOSING)) {
+
+ /*
+ * Our conditions to leave cleanly and happily:
+ * 1) NONBLOCKING on the tty is set.
+ * 2) CLOCAL is set.
+ * 3) DCD (fake or real) is active.
+ */
+
+ if (file->f_flags & O_NONBLOCK) {
+ break;
+ }
+
+ if (tty->flags & (1 << TTY_IO_ERROR)) {
+ break;
+ }
+
+ if (ch->ch_flags & CH_CD) {
+ DPR_OPEN(("%d: ch_flags: %x\n", __LINE__, ch->ch_flags));
+ break;
+ }
+
+ if (ch->ch_flags & CH_FCAR) {
+ DPR_OPEN(("%d: ch_flags: %x\n", __LINE__, ch->ch_flags));
+ break;
+ }
+ }
+ else {
+ sleep_on_un_flags = 1;
+ }
+
+ /*
+ * If there is a signal pending, the user probably
+ * interrupted (ctrl-c) us.
+ * Leave loop with error set.
+ */
+ if (signal_pending(current)) {
+ DPR_OPEN(("%d: signal pending...\n", __LINE__));
+ retval = -ERESTARTSYS;
+ break;
+ }
+
+ DPR_OPEN(("dgap_block_til_ready - blocking.\n"));
+
+ /*
+ * Store the flags before we let go of channel lock
+ */
+ if (sleep_on_un_flags)
+ old_flags = ch->ch_tun.un_flags | ch->ch_pun.un_flags;
+ else
+ old_flags = ch->ch_flags;
+
+ /*
+ * Let go of channel lock before calling schedule.
+ * Our poller will get any FEP events and wake us up when DCD
+ * eventually goes active.
+ */
+
+ DGAP_UNLOCK(ch->ch_lock, lock_flags);
+
+ DPR_OPEN(("Going to sleep on %s flags...\n",
+ (sleep_on_un_flags ? "un" : "ch")));
+
+ /*
+ * Wait for something in the flags to change from the current value.
+ */
+ if (sleep_on_un_flags) {
+ retval = wait_event_interruptible(un->un_flags_wait,
+ (old_flags != (ch->ch_tun.un_flags | ch->ch_pun.un_flags)));
+ }
+ else {
+ retval = wait_event_interruptible(ch->ch_flags_wait,
+ (old_flags != ch->ch_flags));
+ }
+
+ DPR_OPEN(("After sleep... retval: %x\n", retval));
+
+ /*
+ * We got woken up for some reason.
+ * Before looping around, grab our channel lock.
+ */
+ DGAP_LOCK(ch->ch_lock, lock_flags);
+ }
+
+ ch->ch_wopen--;
+
+ DGAP_UNLOCK(ch->ch_lock, lock_flags);
+
+ DPR_OPEN(("dgap_block_til_ready - after blocking.\n"));
+
+ if (retval) {
+ DPR_OPEN(("dgap_block_til_ready - done. error. retval: %x\n", retval));
+ return(retval);
+ }
+
+ DPR_OPEN(("dgap_block_til_ready - done no error. jiffies: %lu\n", jiffies));
+
+ return(0);
+}
+
+
+/*
+ * dgap_tty_hangup()
+ *
+ * Hangup the port. Like a close, but don't wait for output to drain.
+ */
+static void dgap_tty_hangup(struct tty_struct *tty)
+{
+ struct board_t *bd;
+ struct channel_t *ch;
+ struct un_t *un;
+
+ if (!tty || tty->magic != TTY_MAGIC)
+ return;
+
+ un = tty->driver_data;
+ if (!un || un->magic != DGAP_UNIT_MAGIC)
+ return;
+
+ ch = un->un_ch;
+ if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
+ return;
+
+ bd = ch->ch_bd;
+ if (!bd || bd->magic != DGAP_BOARD_MAGIC)
+ return;
+
+ DPR_CLOSE(("dgap_hangup called. ch->ch_open_count: %d un->un_open_count: %d\n",
+ ch->ch_open_count, un->un_open_count));
+
+ /* flush the transmit queues */
+ dgap_tty_flush_buffer(tty);
+
+ DPR_CLOSE(("dgap_hangup finished. ch->ch_open_count: %d un->un_open_count: %d\n",
+ ch->ch_open_count, un->un_open_count));
+}
+
+
+
+/*
+ * dgap_tty_close()
+ *
+ */
+static void dgap_tty_close(struct tty_struct *tty, struct file *file)
+{
+ struct ktermios *ts;
+ struct board_t *bd;
+ struct channel_t *ch;
+ struct un_t *un;
+ ulong lock_flags;
+ int rc = 0;
+
+ if (!tty || tty->magic != TTY_MAGIC)
+ return;
+
+ un = tty->driver_data;
+ if (!un || un->magic != DGAP_UNIT_MAGIC)
+ return;
+
+ ch = un->un_ch;
+ if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
+ return;
+
+ bd = ch->ch_bd;
+ if (!bd || bd->magic != DGAP_BOARD_MAGIC)
+ return;
+
+ ts = &tty->termios;
+
+ DPR_CLOSE(("Close called\n"));
+
+ DGAP_LOCK(ch->ch_lock, lock_flags);
+
+ /*
+ * Determine if this is the last close or not - and if we agree about
+ * which type of close it is with the Line Discipline
+ */
+ if ((tty->count == 1) && (un->un_open_count != 1)) {
+ /*
+ * Uh, oh. tty->count is 1, which means that the tty
+ * structure will be freed. un_open_count should always
+ * be one in these conditions. If it's greater than
+ * one, we've got real problems, since it means the
+ * serial port won't be shutdown.
+ */
+ APR(("tty->count is 1, un open count is %d\n", un->un_open_count));
+ un->un_open_count = 1;
+ }
+
+ if (--un->un_open_count < 0) {
+ APR(("bad serial port open count of %d\n", un->un_open_count));
+ un->un_open_count = 0;
+ }
+
+ ch->ch_open_count--;
+
+ if (ch->ch_open_count && un->un_open_count) {
+ DPR_CLOSE(("dgap_tty_close: not last close ch: %d un:%d\n",
+ ch->ch_open_count, un->un_open_count));
+
+ DGAP_UNLOCK(ch->ch_lock, lock_flags);
+ return;
+ }
+
+ /* OK, its the last close on the unit */
+ DPR_CLOSE(("dgap_tty_close - last close on unit procedures\n"));
+
+ un->un_flags |= UN_CLOSING;
+
+ tty->closing = 1;
+
+ /*
+ * Only officially close channel if count is 0 and
+ * DIGI_PRINTER bit is not set.
+ */
+ if ((ch->ch_open_count == 0) && !(ch->ch_digi.digi_flags & DIGI_PRINTER)) {
+
+ ch->ch_flags &= ~(CH_RXBLOCK);
+
+ DGAP_UNLOCK(ch->ch_lock, lock_flags);
+
+ /* wait for output to drain */
+ /* This will also return if we take an interrupt */
+
+ DPR_CLOSE(("Calling wait_for_drain\n"));
+ rc = dgap_wait_for_drain(tty);
+ DPR_CLOSE(("After calling wait_for_drain\n"));
+
+ if (rc) {
+ DPR_BASIC(("dgap_tty_close - bad return: %d ", rc));
+ }
+
+ dgap_tty_flush_buffer(tty);
+ tty_ldisc_flush(tty);
+
+ DGAP_LOCK(ch->ch_lock, lock_flags);
+
+ tty->closing = 0;
+
+ /*
+ * If we have HUPCL set, lower DTR and RTS
+ */
+ if (ch->ch_c_cflag & HUPCL ) {
+ DPR_CLOSE(("Close. HUPCL set, dropping DTR/RTS\n"));
+ ch->ch_mostat &= ~(D_RTS(ch)|D_DTR(ch));
+ dgap_cmdb( ch, SMODEM, 0, D_DTR(ch)|D_RTS(ch), 0 );
+
+ /*
+ * Go to sleep to ensure RTS/DTR
+ * have been dropped for modems to see it.
+ */
+ if (ch->ch_close_delay) {
+ DPR_CLOSE(("Close. Sleeping for RTS/DTR drop\n"));
+
+ DGAP_UNLOCK(ch->ch_lock, lock_flags);
+ dgap_ms_sleep(ch->ch_close_delay);
+ DGAP_LOCK(ch->ch_lock, lock_flags);
+
+ DPR_CLOSE(("Close. After sleeping for RTS/DTR drop\n"));
+ }
+ }
+
+ ch->pscan_state = 0;
+ ch->pscan_savechar = 0;
+ ch->ch_baud_info = 0;
+
+ }
+
+ /*
+ * turn off print device when closing print device.
+ */
+ if ((un->un_type == DGAP_PRINT) && (ch->ch_flags & CH_PRON) ) {
+ dgap_wmove(ch, ch->ch_digi.digi_offstr,
+ (int) ch->ch_digi.digi_offlen);
+ ch->ch_flags &= ~CH_PRON;
+ }
+
+ un->un_tty = NULL;
+ un->un_flags &= ~(UN_ISOPEN | UN_CLOSING);
+ tty->driver_data = NULL;
+
+ DPR_CLOSE(("Close. Doing wakeups\n"));
+ wake_up_interruptible(&ch->ch_flags_wait);
+ wake_up_interruptible(&un->un_flags_wait);
+
+ DGAP_UNLOCK(ch->ch_lock, lock_flags);
+
+ DPR_BASIC(("dgap_tty_close - complete\n"));
+}
+
+
+/*
+ * dgap_tty_chars_in_buffer()
+ *
+ * Return number of characters that have not been transmitted yet.
+ *
+ * This routine is used by the line discipline to determine if there
+ * is data waiting to be transmitted/drained/flushed or not.
+ */
+static int dgap_tty_chars_in_buffer(struct tty_struct *tty)
+{
+ struct board_t *bd = NULL;
+ struct channel_t *ch = NULL;
+ struct un_t *un = NULL;
+ struct bs_t *bs = NULL;
+ uchar tbusy;
+ uint chars = 0;
+ u16 thead, ttail, tmask, chead, ctail;
+ ulong lock_flags = 0;
+ ulong lock_flags2 = 0;
+
+ if (tty == NULL)
+ return(0);
+
+ un = tty->driver_data;
+ if (!un || un->magic != DGAP_UNIT_MAGIC)
+ return (0);
+
+ ch = un->un_ch;
+ if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
+ return (0);
+
+ bd = ch->ch_bd;
+ if (!bd || bd->magic != DGAP_BOARD_MAGIC)
+ return (0);
+
+ bs = ch->ch_bs;
+ if (!bs)
+ return (0);
+
+ DGAP_LOCK(bd->bd_lock, lock_flags);
+ DGAP_LOCK(ch->ch_lock, lock_flags2);
+
+ tmask = (ch->ch_tsize - 1);
+
+ /* Get Transmit queue pointers */
+ thead = readw(&(bs->tx_head)) & tmask;
+ ttail = readw(&(bs->tx_tail)) & tmask;
+
+ /* Get tbusy flag */
+ tbusy = readb(&(bs->tbusy));
+
+ /* Get Command queue pointers */
+ chead = readw(&(ch->ch_cm->cm_head));
+ ctail = readw(&(ch->ch_cm->cm_tail));
+
+ DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+ DGAP_UNLOCK(bd->bd_lock, lock_flags);
+
+ /*
+ * The only way we know for sure if there is no pending
+ * data left to be transferred, is if:
+ * 1) Transmit head and tail are equal (empty).
+ * 2) Command queue head and tail are equal (empty).
+ * 3) The "TBUSY" flag is 0. (Transmitter not busy).
+ */
+
+ if ((ttail == thead) && (tbusy == 0) && (chead == ctail)) {
+ chars = 0;
+ }
+ else {
+ if (thead >= ttail)
+ chars = thead - ttail;
+ else
+ chars = thead - ttail + ch->ch_tsize;
+ /*
+ * Fudge factor here.
+ * If chars is zero, we know that the command queue had
+ * something in it or tbusy was set. Because we cannot
+ * be sure if there is still some data to be transmitted,
+ * lets lie, and tell ld we have 1 byte left.
+ */
+ if (chars == 0) {
+ /*
+ * If TBUSY is still set, and our tx buffers are empty,
+ * force the firmware to send me another wakeup after
+ * TBUSY has been cleared.
+ */
+ if (tbusy != 0) {
+ DGAP_LOCK(ch->ch_lock, lock_flags);
+ un->un_flags |= UN_EMPTY;
+ writeb(1, &(bs->iempty));
+ DGAP_UNLOCK(ch->ch_lock, lock_flags);
+ }
+ chars = 1;
+ }
+ }
+
+ DPR_WRITE(("dgap_tty_chars_in_buffer. Port: %x - %d (head: %d tail: %d tsize: %d)\n",
+ ch->ch_portnum, chars, thead, ttail, ch->ch_tsize));
+ return(chars);
+}
+
+
+static int dgap_wait_for_drain(struct tty_struct *tty)
+{
+ struct channel_t *ch;
+ struct un_t *un;
+ struct bs_t *bs;
+ int ret = -EIO;
+ uint count = 1;
+ ulong lock_flags = 0;
+
+ if (!tty || tty->magic != TTY_MAGIC)
+ return ret;
+
+ un = tty->driver_data;
+ if (!un || un->magic != DGAP_UNIT_MAGIC)
+ return ret;
+
+ ch = un->un_ch;
+ if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
+ return ret;
+
+ bs = ch->ch_bs;
+ if (!bs)
+ return ret;
+
+ ret = 0;
+
+ DPR_DRAIN(("dgap_wait_for_drain start\n"));
+
+ /* Loop until data is drained */
+ while (count != 0) {
+
+ count = dgap_tty_chars_in_buffer(tty);
+
+ if (count == 0)
+ break;
+
+ /* Set flag waiting for drain */
+ DGAP_LOCK(ch->ch_lock, lock_flags);
+ un->un_flags |= UN_EMPTY;
+ writeb(1, &(bs->iempty));
+ DGAP_UNLOCK(ch->ch_lock, lock_flags);
+
+ /* Go to sleep till we get woken up */
+ ret = wait_event_interruptible(un->un_flags_wait, ((un->un_flags & UN_EMPTY) == 0));
+ /* If ret is non-zero, user ctrl-c'ed us */
+ if (ret) {
+ break;
+ }
+ }
+
+ DGAP_LOCK(ch->ch_lock, lock_flags);
+ un->un_flags &= ~(UN_EMPTY);
+ DGAP_UNLOCK(ch->ch_lock, lock_flags);
+
+ DPR_DRAIN(("dgap_wait_for_drain finish\n"));
+ return (ret);
+}
+
+
+/*
+ * dgap_maxcps_room
+ *
+ * Reduces bytes_available to the max number of characters
+ * that can be sent currently given the maxcps value, and
+ * returns the new bytes_available. This only affects printer
+ * output.
+ */
+static int dgap_maxcps_room(struct tty_struct *tty, int bytes_available)
+{
+ struct channel_t *ch = NULL;
+ struct un_t *un = NULL;
+
+ if (tty == NULL)
+ return (bytes_available);
+
+ un = tty->driver_data;
+ if (!un || un->magic != DGAP_UNIT_MAGIC)
+ return (bytes_available);
+
+ ch = un->un_ch;
+ if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
+ return (bytes_available);
+
+ /*
+ * If its not the Transparent print device, return
+ * the full data amount.
+ */
+ if (un->un_type != DGAP_PRINT)
+ return (bytes_available);
+
+ if (ch->ch_digi.digi_maxcps > 0 && ch->ch_digi.digi_bufsize > 0 ) {
+ int cps_limit = 0;
+ unsigned long current_time = jiffies;
+ unsigned long buffer_time = current_time +
+ (HZ * ch->ch_digi.digi_bufsize) / ch->ch_digi.digi_maxcps;
+
+ if (ch->ch_cpstime < current_time) {
+ /* buffer is empty */
+ ch->ch_cpstime = current_time; /* reset ch_cpstime */
+ cps_limit = ch->ch_digi.digi_bufsize;
+ }
+ else if (ch->ch_cpstime < buffer_time) {
+ /* still room in the buffer */
+ cps_limit = ((buffer_time - ch->ch_cpstime) * ch->ch_digi.digi_maxcps) / HZ;
+ }
+ else {
+ /* no room in the buffer */
+ cps_limit = 0;
+ }
+
+ bytes_available = min(cps_limit, bytes_available);
+ }
+
+ return (bytes_available);
+}
+
+
+static inline void dgap_set_firmware_event(struct un_t *un, unsigned int event)
+{
+ struct channel_t *ch = NULL;
+ struct bs_t *bs = NULL;
+
+ if (!un || un->magic != DGAP_UNIT_MAGIC)
+ return;
+ ch = un->un_ch;
+ if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
+ return;
+ bs = ch->ch_bs;
+ if (!bs)
+ return;
+
+ if ((event & UN_LOW) != 0) {
+ if ((un->un_flags & UN_LOW) == 0) {
+ un->un_flags |= UN_LOW;
+ writeb(1, &(bs->ilow));
+ }
+ }
+ if ((event & UN_LOW) != 0) {
+ if ((un->un_flags & UN_EMPTY) == 0) {
+ un->un_flags |= UN_EMPTY;
+ writeb(1, &(bs->iempty));
+ }
+ }
+}
+
+
+/*
+ * dgap_tty_write_room()
+ *
+ * Return space available in Tx buffer
+ */
+static int dgap_tty_write_room(struct tty_struct *tty)
+{
+ struct channel_t *ch = NULL;
+ struct un_t *un = NULL;
+ struct bs_t *bs = NULL;
+ u16 head, tail, tmask;
+ int ret = 0;
+ ulong lock_flags = 0;
+
+ if (tty == NULL || dgap_TmpWriteBuf == NULL)
+ return(0);
+
+ un = tty->driver_data;
+ if (!un || un->magic != DGAP_UNIT_MAGIC)
+ return (0);
+
+ ch = un->un_ch;
+ if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
+ return (0);
+
+ bs = ch->ch_bs;
+ if (!bs)
+ return (0);
+
+ DGAP_LOCK(ch->ch_lock, lock_flags);
+
+ tmask = ch->ch_tsize - 1;
+ head = readw(&(bs->tx_head)) & tmask;
+ tail = readw(&(bs->tx_tail)) & tmask;
+
+ if ((ret = tail - head - 1) < 0)
+ ret += ch->ch_tsize;
+
+ /* Limit printer to maxcps */
+ ret = dgap_maxcps_room(tty, ret);
+
+ /*
+ * If we are printer device, leave space for
+ * possibly both the on and off strings.
+ */
+ if (un->un_type == DGAP_PRINT) {
+ if (!(ch->ch_flags & CH_PRON))
+ ret -= ch->ch_digi.digi_onlen;
+ ret -= ch->ch_digi.digi_offlen;
+ }
+ else {
+ if (ch->ch_flags & CH_PRON)
+ ret -= ch->ch_digi.digi_offlen;
+ }
+
+ if (ret < 0)
+ ret = 0;
+
+ /*
+ * Schedule FEP to wake us up if needed.
+ *
+ * TODO: This might be overkill...
+ * Do we really need to schedule callbacks from the FEP
+ * in every case? Can we get smarter based on ret?
+ */
+ dgap_set_firmware_event(un, UN_LOW | UN_EMPTY);
+ DGAP_UNLOCK(ch->ch_lock, lock_flags);
+
+ DPR_WRITE(("dgap_tty_write_room - %d tail: %d head: %d\n", ret, tail, head));
+
+ return(ret);
+}
+
+
+/*
+ * dgap_tty_put_char()
+ *
+ * Put a character into ch->ch_buf
+ *
+ * - used by the line discipline for OPOST processing
+ */
+static int dgap_tty_put_char(struct tty_struct *tty, unsigned char c)
+{
+ /*
+ * Simply call tty_write.
+ */
+ DPR_WRITE(("dgap_tty_put_char called\n"));
+ dgap_tty_write(tty, &c, 1);
+ return 1;
+}
+
+
+/*
+ * dgap_tty_write()
+ *
+ * Take data from the user or kernel and send it out to the FEP.
+ * In here exists all the Transparent Print magic as well.
+ */
+static int dgap_tty_write(struct tty_struct *tty, const unsigned char *buf, int count)
+{
+ struct channel_t *ch = NULL;
+ struct un_t *un = NULL;
+ struct bs_t *bs = NULL;
+ char *vaddr = NULL;
+ u16 head, tail, tmask, remain;
+ int bufcount = 0, n = 0;
+ int orig_count = 0;
+ ulong lock_flags;
+ int from_user = 0;
+
+ if (tty == NULL || dgap_TmpWriteBuf == NULL)
+ return(0);
+
+ un = tty->driver_data;
+ if (!un || un->magic != DGAP_UNIT_MAGIC)
+ return (0);
+
+ ch = un->un_ch;
+ if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
+ return(0);
+
+ bs = ch->ch_bs;
+ if (!bs)
+ return(0);
+
+ if (!count)
+ return(0);
+
+ DPR_WRITE(("dgap_tty_write: Port: %x tty=%p user=%d len=%d\n",
+ ch->ch_portnum, tty, from_user, count));
+
+ /*
+ * Store original amount of characters passed in.
+ * This helps to figure out if we should ask the FEP
+ * to send us an event when it has more space available.
+ */
+ orig_count = count;
+
+ DGAP_LOCK(ch->ch_lock, lock_flags);
+
+ /* Get our space available for the channel from the board */
+ tmask = ch->ch_tsize - 1;
+ head = readw(&(bs->tx_head)) & tmask;
+ tail = readw(&(bs->tx_tail)) & tmask;
+
+ if ((bufcount = tail - head - 1) < 0)
+ bufcount += ch->ch_tsize;
+
+ DPR_WRITE(("%d: bufcount: %x count: %x tail: %x head: %x tmask: %x\n",
+ __LINE__, bufcount, count, tail, head, tmask));
+
+ /*
+ * Limit printer output to maxcps overall, with bursts allowed
+ * up to bufsize characters.
+ */
+ bufcount = dgap_maxcps_room(tty, bufcount);
+
+ /*
+ * Take minimum of what the user wants to send, and the
+ * space available in the FEP buffer.
+ */
+ count = min(count, bufcount);
+
+ /*
+ * Bail if no space left.
+ */
+ if (count <= 0) {
+ dgap_set_firmware_event(un, UN_LOW | UN_EMPTY);
+ DGAP_UNLOCK(ch->ch_lock, lock_flags);
+ return(0);
+ }
+
+ /*
+ * Output the printer ON string, if we are in terminal mode, but
+ * need to be in printer mode.
+ */
+ if ((un->un_type == DGAP_PRINT) && !(ch->ch_flags & CH_PRON)) {
+ dgap_wmove(ch, ch->ch_digi.digi_onstr,
+ (int) ch->ch_digi.digi_onlen);
+ head = readw(&(bs->tx_head)) & tmask;
+ ch->ch_flags |= CH_PRON;
+ }
+
+ /*
+ * On the other hand, output the printer OFF string, if we are
+ * currently in printer mode, but need to output to the terminal.
+ */
+ if ((un->un_type != DGAP_PRINT) && (ch->ch_flags & CH_PRON)) {
+ dgap_wmove(ch, ch->ch_digi.digi_offstr,
+ (int) ch->ch_digi.digi_offlen);
+ head = readw(&(bs->tx_head)) & tmask;
+ ch->ch_flags &= ~CH_PRON;
+ }
+
+ /*
+ * If there is nothing left to copy, or I can't handle any more data, leave.
+ */
+ if (count <= 0) {
+ dgap_set_firmware_event(un, UN_LOW | UN_EMPTY);
+ DGAP_UNLOCK(ch->ch_lock, lock_flags);
+ return(0);
+ }
+
+ if (from_user) {
+
+ count = min(count, WRITEBUFLEN);
+
+ DGAP_UNLOCK(ch->ch_lock, lock_flags);
+
+ /*
+ * If data is coming from user space, copy it into a temporary
+ * buffer so we don't get swapped out while doing the copy to
+ * the board.
+ */
+ /* we're allowed to block if it's from_user */
+ if (down_interruptible(&dgap_TmpWriteSem)) {
+ return (-EINTR);
+ }
+
+ if (copy_from_user(dgap_TmpWriteBuf, (const uchar __user *) buf, count)) {
+ up(&dgap_TmpWriteSem);
+ printk("Write: Copy from user failed!\n");
+ return -EFAULT;
+ }
+
+ DGAP_LOCK(ch->ch_lock, lock_flags);
+
+ buf = dgap_TmpWriteBuf;
+ }
+
+ n = count;
+
+ /*
+ * If the write wraps over the top of the circular buffer,
+ * move the portion up to the wrap point, and reset the
+ * pointers to the bottom.
+ */
+ remain = ch->ch_tstart + ch->ch_tsize - head;
+
+ if (n >= remain) {
+ n -= remain;
+ vaddr = ch->ch_taddr + head;
+
+ memcpy_toio(vaddr, (uchar *) buf, remain);
+ dgap_sniff_nowait_nolock(ch, "USER WRITE", (uchar *) buf, remain);
+
+ head = ch->ch_tstart;
+ buf += remain;
+ }
+
+ if (n > 0) {
+
+ /*
+ * Move rest of data.
+ */
+ vaddr = ch->ch_taddr + head;
+ remain = n;
+
+ memcpy_toio(vaddr, (uchar *) buf, remain);
+ dgap_sniff_nowait_nolock(ch, "USER WRITE", (uchar *) buf, remain);
+
+ head += remain;
+
+ }
+
+ if (count) {
+ ch->ch_txcount += count;
+ head &= tmask;
+ writew(head, &(bs->tx_head));
+ }
+
+
+ dgap_set_firmware_event(un, UN_LOW | UN_EMPTY);
+
+ /*
+ * If this is the print device, and the
+ * printer is still on, we need to turn it
+ * off before going idle. If the buffer is
+ * non-empty, wait until it goes empty.
+ * Otherwise turn it off right now.
+ */
+ if ((un->un_type == DGAP_PRINT) && (ch->ch_flags & CH_PRON)) {
+ tail = readw(&(bs->tx_tail)) & tmask;
+
+ if (tail != head) {
+ un->un_flags |= UN_EMPTY;
+ writeb(1, &(bs->iempty));
+ }
+ else {
+ dgap_wmove(ch, ch->ch_digi.digi_offstr,
+ (int) ch->ch_digi.digi_offlen);
+ head = readw(&(bs->tx_head)) & tmask;
+ ch->ch_flags &= ~CH_PRON;
+ }
+ }
+
+ /* Update printer buffer empty time. */
+ if ((un->un_type == DGAP_PRINT) && (ch->ch_digi.digi_maxcps > 0)
+ && (ch->ch_digi.digi_bufsize > 0)) {
+ ch->ch_cpstime += (HZ * count) / ch->ch_digi.digi_maxcps;
+ }
+
+ if (from_user) {
+ DGAP_UNLOCK(ch->ch_lock, lock_flags);
+ up(&dgap_TmpWriteSem);
+ }
+ else {
+ DGAP_UNLOCK(ch->ch_lock, lock_flags);
+ }
+
+ DPR_WRITE(("Write finished - Write %d bytes of %d.\n", count, orig_count));
+
+ return (count);
+}
+
+
+
+/*
+ * Return modem signals to ld.
+ */
+static int dgap_tty_tiocmget(struct tty_struct *tty)
+{
+ struct channel_t *ch;
+ struct un_t *un;
+ int result = -EIO;
+ uchar mstat = 0;
+ ulong lock_flags;
+
+ if (!tty || tty->magic != TTY_MAGIC)
+ return result;
+
+ un = tty->driver_data;
+ if (!un || un->magic != DGAP_UNIT_MAGIC)
+ return result;
+
+ ch = un->un_ch;
+ if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
+ return result;
+
+ DPR_IOCTL(("dgap_tty_tiocmget start\n"));
+
+ DGAP_LOCK(ch->ch_lock, lock_flags);
+
+ mstat = readb(&(ch->ch_bs->m_stat));
+ /* Append any outbound signals that might be pending... */
+ mstat |= ch->ch_mostat;
+
+ DGAP_UNLOCK(ch->ch_lock, lock_flags);
+
+ result = 0;
+
+ if (mstat & D_DTR(ch))
+ result |= TIOCM_DTR;
+ if (mstat & D_RTS(ch))
+ result |= TIOCM_RTS;
+ if (mstat & D_CTS(ch))
+ result |= TIOCM_CTS;
+ if (mstat & D_DSR(ch))
+ result |= TIOCM_DSR;
+ if (mstat & D_RI(ch))
+ result |= TIOCM_RI;
+ if (mstat & D_CD(ch))
+ result |= TIOCM_CD;
+
+ DPR_IOCTL(("dgap_tty_tiocmget finish\n"));
+
+ return result;
+}
+
+
+/*
+ * dgap_tty_tiocmset()
+ *
+ * Set modem signals, called by ld.
+ */
+
+static int dgap_tty_tiocmset(struct tty_struct *tty,
+ unsigned int set, unsigned int clear)
+{
+ struct board_t *bd;
+ struct channel_t *ch;
+ struct un_t *un;
+ int ret = -EIO;
+ ulong lock_flags;
+ ulong lock_flags2;
+
+ if (!tty || tty->magic != TTY_MAGIC)
+ return ret;
+
+ un = tty->driver_data;
+ if (!un || un->magic != DGAP_UNIT_MAGIC)
+ return ret;
+
+ ch = un->un_ch;
+ if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
+ return ret;
+
+ bd = ch->ch_bd;
+ if (!bd || bd->magic != DGAP_BOARD_MAGIC)
+ return ret;
+
+ DPR_IOCTL(("dgap_tty_tiocmset start\n"));
+
+ DGAP_LOCK(bd->bd_lock, lock_flags);
+ DGAP_LOCK(ch->ch_lock, lock_flags2);
+
+ if (set & TIOCM_RTS) {
+ ch->ch_mforce |= D_RTS(ch);
+ ch->ch_mval |= D_RTS(ch);
+ }
+
+ if (set & TIOCM_DTR) {
+ ch->ch_mforce |= D_DTR(ch);
+ ch->ch_mval |= D_DTR(ch);
+ }
+
+ if (clear & TIOCM_RTS) {
+ ch->ch_mforce |= D_RTS(ch);
+ ch->ch_mval &= ~(D_RTS(ch));
+ }
+
+ if (clear & TIOCM_DTR) {
+ ch->ch_mforce |= D_DTR(ch);
+ ch->ch_mval &= ~(D_DTR(ch));
+ }
+
+ dgap_param(tty);
+
+ DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+ DGAP_UNLOCK(bd->bd_lock, lock_flags);
+
+ DPR_IOCTL(("dgap_tty_tiocmset finish\n"));
+
+ return (0);
+}
+
+
+
+/*
+ * dgap_tty_send_break()
+ *
+ * Send a Break, called by ld.
+ */
+static int dgap_tty_send_break(struct tty_struct *tty, int msec)
+{
+ struct board_t *bd;
+ struct channel_t *ch;
+ struct un_t *un;
+ int ret = -EIO;
+ ulong lock_flags;
+ ulong lock_flags2;
+
+ if (!tty || tty->magic != TTY_MAGIC)
+ return ret;
+
+ un = tty->driver_data;
+ if (!un || un->magic != DGAP_UNIT_MAGIC)
+ return ret;
+
+ ch = un->un_ch;
+ if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
+ return ret;
+
+ bd = ch->ch_bd;
+ if (!bd || bd->magic != DGAP_BOARD_MAGIC)
+ return ret;
+
+ switch (msec) {
+ case -1:
+ msec = 0xFFFF;
+ break;
+ case 0:
+ msec = 1;
+ break;
+ default:
+ msec /= 10;
+ break;
+ }
+
+ DPR_IOCTL(("dgap_tty_send_break start 1. %lx\n", jiffies));
+
+ DGAP_LOCK(bd->bd_lock, lock_flags);
+ DGAP_LOCK(ch->ch_lock, lock_flags2);
+#if 0
+ dgap_cmdw(ch, SBREAK, (u16) SBREAK_TIME, 0);
+#endif
+ dgap_cmdw(ch, SBREAK, (u16) msec, 0);
+
+ DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+ DGAP_UNLOCK(bd->bd_lock, lock_flags);
+
+ DPR_IOCTL(("dgap_tty_send_break finish\n"));
+
+ return (0);
+}
+
+
+
+
+/*
+ * dgap_tty_wait_until_sent()
+ *
+ * wait until data has been transmitted, called by ld.
+ */
+static void dgap_tty_wait_until_sent(struct tty_struct *tty, int timeout)
+{
+ int rc;
+ rc = dgap_wait_for_drain(tty);
+ if (rc) {
+ DPR_IOCTL(("dgap_tty_ioctl - bad return: %d ", rc));
+ return;
+ }
+ return;
+}
+
+
+
+/*
+ * dgap_send_xchar()
+ *
+ * send a high priority character, called by ld.
+ */
+static void dgap_tty_send_xchar(struct tty_struct *tty, char c)
+{
+ struct board_t *bd;
+ struct channel_t *ch;
+ struct un_t *un;
+ ulong lock_flags;
+ ulong lock_flags2;
+
+ if (!tty || tty->magic != TTY_MAGIC)
+ return;
+
+ un = tty->driver_data;
+ if (!un || un->magic != DGAP_UNIT_MAGIC)
+ return;
+
+ ch = un->un_ch;
+ if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
+ return;
+
+ bd = ch->ch_bd;
+ if (!bd || bd->magic != DGAP_BOARD_MAGIC)
+ return;
+
+ DPR_IOCTL(("dgap_tty_send_xchar start 1. %lx\n", jiffies));
+
+ DGAP_LOCK(bd->bd_lock, lock_flags);
+ DGAP_LOCK(ch->ch_lock, lock_flags2);
+
+ /*
+ * This is technically what we should do.
+ * However, the NIST tests specifically want
+ * to see each XON or XOFF character that it
+ * sends, so lets just send each character
+ * by hand...
+ */
+#if 0
+ if (c == STOP_CHAR(tty)) {
+ dgap_cmdw(ch, RPAUSE, 0, 0);
+ }
+ else if (c == START_CHAR(tty)) {
+ dgap_cmdw(ch, RRESUME, 0, 0);
+ }
+ else {
+ dgap_wmove(ch, &c, 1);
+ }
+#else
+ dgap_wmove(ch, &c, 1);
+#endif
+
+ DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+ DGAP_UNLOCK(bd->bd_lock, lock_flags);
+
+ DPR_IOCTL(("dgap_tty_send_xchar finish\n"));
+
+ return;
+}
+
+
+
+
+/*
+ * Return modem signals to ld.
+ */
+static int dgap_get_modem_info(struct channel_t *ch, unsigned int __user *value)
+{
+ int result = 0;
+ uchar mstat = 0;
+ ulong lock_flags;
+ int rc = 0;
+
+ DPR_IOCTL(("dgap_get_modem_info start\n"));
+
+ if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
+ return(-ENXIO);
+
+ DGAP_LOCK(ch->ch_lock, lock_flags);
+
+ mstat = readb(&(ch->ch_bs->m_stat));
+ /* Append any outbound signals that might be pending... */
+ mstat |= ch->ch_mostat;
+
+ DGAP_UNLOCK(ch->ch_lock, lock_flags);
+
+ result = 0;
+
+ if (mstat & D_DTR(ch))
+ result |= TIOCM_DTR;
+ if (mstat & D_RTS(ch))
+ result |= TIOCM_RTS;
+ if (mstat & D_CTS(ch))
+ result |= TIOCM_CTS;
+ if (mstat & D_DSR(ch))
+ result |= TIOCM_DSR;
+ if (mstat & D_RI(ch))
+ result |= TIOCM_RI;
+ if (mstat & D_CD(ch))
+ result |= TIOCM_CD;
+
+ rc = put_user(result, value);
+
+ DPR_IOCTL(("dgap_get_modem_info finish\n"));
+ return(rc);
+}
+
+
+/*
+ * dgap_set_modem_info()
+ *
+ * Set modem signals, called by ld.
+ */
+static int dgap_set_modem_info(struct tty_struct *tty, unsigned int command, unsigned int __user *value)
+{
+ struct board_t *bd;
+ struct channel_t *ch;
+ struct un_t *un;
+ int ret = -ENXIO;
+ unsigned int arg = 0;
+ ulong lock_flags;
+ ulong lock_flags2;
+
+ if (!tty || tty->magic != TTY_MAGIC)
+ return ret;
+
+ un = tty->driver_data;
+ if (!un || un->magic != DGAP_UNIT_MAGIC)
+ return ret;
+
+ ch = un->un_ch;
+ if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
+ return ret;
+
+ bd = ch->ch_bd;
+ if (!bd || bd->magic != DGAP_BOARD_MAGIC)
+ return ret;
+
+ DPR_IOCTL(("dgap_set_modem_info() start\n"));
+
+ ret = get_user(arg, value);
+ if (ret) {
+ DPR_IOCTL(("dgap_set_modem_info %d ret: %x. finished.\n", __LINE__, ret));
+ return(ret);
+ }
+
+ DPR_IOCTL(("dgap_set_modem_info: command: %x arg: %x\n", command, arg));
+
+ switch (command) {
+ case TIOCMBIS:
+ if (arg & TIOCM_RTS) {
+ ch->ch_mforce |= D_RTS(ch);
+ ch->ch_mval |= D_RTS(ch);
+ }
+
+ if (arg & TIOCM_DTR) {
+ ch->ch_mforce |= D_DTR(ch);
+ ch->ch_mval |= D_DTR(ch);
+ }
+
+ break;
+
+ case TIOCMBIC:
+ if (arg & TIOCM_RTS) {
+ ch->ch_mforce |= D_RTS(ch);
+ ch->ch_mval &= ~(D_RTS(ch));
+ }
+
+ if (arg & TIOCM_DTR) {
+ ch->ch_mforce |= D_DTR(ch);
+ ch->ch_mval &= ~(D_DTR(ch));
+ }
+
+ break;
+
+ case TIOCMSET:
+ ch->ch_mforce = D_DTR(ch)|D_RTS(ch);
+
+ if (arg & TIOCM_RTS) {
+ ch->ch_mval |= D_RTS(ch);
+ }
+ else {
+ ch->ch_mval &= ~(D_RTS(ch));
+ }
+
+ if (arg & TIOCM_DTR) {
+ ch->ch_mval |= (D_DTR(ch));
+ }
+ else {
+ ch->ch_mval &= ~(D_DTR(ch));
+ }
+
+ break;
+
+ default:
+ return(-EINVAL);
+ }
+
+ DGAP_LOCK(bd->bd_lock, lock_flags);
+ DGAP_LOCK(ch->ch_lock, lock_flags2);
+
+ dgap_param(tty);
+
+ DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+ DGAP_UNLOCK(bd->bd_lock, lock_flags);
+
+ DPR_IOCTL(("dgap_set_modem_info finish\n"));
+
+ return (0);
+}
+
+
+/*
+ * dgap_tty_digigeta()
+ *
+ * Ioctl to get the information for ditty.
+ *
+ *
+ *
+ */
+static int dgap_tty_digigeta(struct tty_struct *tty, struct digi_t __user *retinfo)
+{
+ struct channel_t *ch;
+ struct un_t *un;
+ struct digi_t tmp;
+ ulong lock_flags;
+
+ if (!retinfo)
+ return (-EFAULT);
+
+ if (!tty || tty->magic != TTY_MAGIC)
+ return (-EFAULT);
+
+ un = tty->driver_data;
+ if (!un || un->magic != DGAP_UNIT_MAGIC)
+ return (-EFAULT);
+
+ ch = un->un_ch;
+ if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
+ return (-EFAULT);
+
+ memset(&tmp, 0, sizeof(tmp));
+
+ DGAP_LOCK(ch->ch_lock, lock_flags);
+ memcpy(&tmp, &ch->ch_digi, sizeof(tmp));
+ DGAP_UNLOCK(ch->ch_lock, lock_flags);
+
+ if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
+ return (-EFAULT);
+
+ return (0);
+}
+
+
+/*
+ * dgap_tty_digiseta()
+ *
+ * Ioctl to set the information for ditty.
+ *
+ *
+ *
+ */
+static int dgap_tty_digiseta(struct tty_struct *tty, struct digi_t __user *new_info)
+{
+ struct board_t *bd;
+ struct channel_t *ch;
+ struct un_t *un;
+ struct digi_t new_digi;
+ ulong lock_flags = 0;
+ unsigned long lock_flags2;
+
+ DPR_IOCTL(("DIGI_SETA start\n"));
+
+ if (!tty || tty->magic != TTY_MAGIC)
+ return (-EFAULT);
+
+ un = tty->driver_data;
+ if (!un || un->magic != DGAP_UNIT_MAGIC)
+ return (-EFAULT);
+
+ ch = un->un_ch;
+ if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
+ return (-EFAULT);
+
+ bd = ch->ch_bd;
+ if (!bd || bd->magic != DGAP_BOARD_MAGIC)
+ return (-EFAULT);
+
+ if (copy_from_user(&new_digi, new_info, sizeof(struct digi_t))) {
+ DPR_IOCTL(("DIGI_SETA failed copy_from_user\n"));
+ return(-EFAULT);
+ }
+
+ DGAP_LOCK(bd->bd_lock, lock_flags);
+ DGAP_LOCK(ch->ch_lock, lock_flags2);
+
+ memcpy(&ch->ch_digi, &new_digi, sizeof(struct digi_t));
+
+ if (ch->ch_digi.digi_maxcps < 1)
+ ch->ch_digi.digi_maxcps = 1;
+
+ if (ch->ch_digi.digi_maxcps > 10000)
+ ch->ch_digi.digi_maxcps = 10000;
+
+ if (ch->ch_digi.digi_bufsize < 10)
+ ch->ch_digi.digi_bufsize = 10;
+
+ if (ch->ch_digi.digi_maxchar < 1)
+ ch->ch_digi.digi_maxchar = 1;
+
+ if (ch->ch_digi.digi_maxchar > ch->ch_digi.digi_bufsize)
+ ch->ch_digi.digi_maxchar = ch->ch_digi.digi_bufsize;
+
+ if (ch->ch_digi.digi_onlen > DIGI_PLEN)
+ ch->ch_digi.digi_onlen = DIGI_PLEN;
+
+ if (ch->ch_digi.digi_offlen > DIGI_PLEN)
+ ch->ch_digi.digi_offlen = DIGI_PLEN;
+
+ dgap_param(tty);
+
+ DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+ DGAP_UNLOCK(bd->bd_lock, lock_flags);
+
+ DPR_IOCTL(("DIGI_SETA finish\n"));
+
+ return(0);
+}
+
+
+/*
+ * dgap_tty_digigetedelay()
+ *
+ * Ioctl to get the current edelay setting.
+ *
+ *
+ *
+ */
+static int dgap_tty_digigetedelay(struct tty_struct *tty, int __user *retinfo)
+{
+ struct channel_t *ch;
+ struct un_t *un;
+ int tmp;
+ ulong lock_flags;
+
+ if (!retinfo)
+ return (-EFAULT);
+
+ if (!tty || tty->magic != TTY_MAGIC)
+ return (-EFAULT);
+
+ un = tty->driver_data;
+ if (!un || un->magic != DGAP_UNIT_MAGIC)
+ return (-EFAULT);
+
+ ch = un->un_ch;
+ if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
+ return (-EFAULT);
+
+ memset(&tmp, 0, sizeof(tmp));
+
+ DGAP_LOCK(ch->ch_lock, lock_flags);
+ tmp = readw(&(ch->ch_bs->edelay));
+ DGAP_UNLOCK(ch->ch_lock, lock_flags);
+
+ if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
+ return (-EFAULT);
+
+ return (0);
+}
+
+
+/*
+ * dgap_tty_digisetedelay()
+ *
+ * Ioctl to set the EDELAY setting
+ *
+ */
+static int dgap_tty_digisetedelay(struct tty_struct *tty, int __user *new_info)
+{
+ struct board_t *bd;
+ struct channel_t *ch;
+ struct un_t *un;
+ int new_digi;
+ ulong lock_flags;
+ ulong lock_flags2;
+
+ DPR_IOCTL(("DIGI_SETA start\n"));
+
+ if (!tty || tty->magic != TTY_MAGIC)
+ return (-EFAULT);
+
+ un = tty->driver_data;
+ if (!un || un->magic != DGAP_UNIT_MAGIC)
+ return (-EFAULT);
+
+ ch = un->un_ch;
+ if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
+ return (-EFAULT);
+
+ bd = ch->ch_bd;
+ if (!bd || bd->magic != DGAP_BOARD_MAGIC)
+ return (-EFAULT);
+
+ if (copy_from_user(&new_digi, new_info, sizeof(int))) {
+ DPR_IOCTL(("DIGI_SETEDELAY failed copy_from_user\n"));
+ return(-EFAULT);
+ }
+
+ DGAP_LOCK(bd->bd_lock, lock_flags);
+ DGAP_LOCK(ch->ch_lock, lock_flags2);
+
+ writew((u16) new_digi, &(ch->ch_bs->edelay));
+
+ dgap_param(tty);
+
+ DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+ DGAP_UNLOCK(bd->bd_lock, lock_flags);
+
+ DPR_IOCTL(("DIGI_SETA finish\n"));
+
+ return(0);
+}
+
+
+/*
+ * dgap_tty_digigetcustombaud()
+ *
+ * Ioctl to get the current custom baud rate setting.
+ */
+static int dgap_tty_digigetcustombaud(struct tty_struct *tty, int __user *retinfo)
+{
+ struct channel_t *ch;
+ struct un_t *un;
+ int tmp;
+ ulong lock_flags;
+
+ if (!retinfo)
+ return (-EFAULT);
+
+ if (!tty || tty->magic != TTY_MAGIC)
+ return (-EFAULT);
+
+ un = tty->driver_data;
+ if (!un || un->magic != DGAP_UNIT_MAGIC)
+ return (-EFAULT);
+
+ ch = un->un_ch;
+ if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
+ return (-EFAULT);
+
+ memset(&tmp, 0, sizeof(tmp));
+
+ DGAP_LOCK(ch->ch_lock, lock_flags);
+ tmp = dgap_get_custom_baud(ch);
+ DGAP_UNLOCK(ch->ch_lock, lock_flags);
+
+ DPR_IOCTL(("DIGI_GETCUSTOMBAUD. Returning %d\n", tmp));
+
+ if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
+ return (-EFAULT);
+
+ return (0);
+}
+
+
+/*
+ * dgap_tty_digisetcustombaud()
+ *
+ * Ioctl to set the custom baud rate setting
+ */
+static int dgap_tty_digisetcustombaud(struct tty_struct *tty, int __user *new_info)
+{
+ struct board_t *bd;
+ struct channel_t *ch;
+ struct un_t *un;
+ uint new_rate;
+ ulong lock_flags;
+ ulong lock_flags2;
+
+ DPR_IOCTL(("DIGI_SETCUSTOMBAUD start\n"));
+
+ if (!tty || tty->magic != TTY_MAGIC)
+ return (-EFAULT);
+
+ un = tty->driver_data;
+ if (!un || un->magic != DGAP_UNIT_MAGIC)
+ return (-EFAULT);
+
+ ch = un->un_ch;
+ if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
+ return (-EFAULT);
+
+ bd = ch->ch_bd;
+ if (!bd || bd->magic != DGAP_BOARD_MAGIC)
+ return (-EFAULT);
+
+
+ if (copy_from_user(&new_rate, new_info, sizeof(unsigned int))) {
+ DPR_IOCTL(("DIGI_SETCUSTOMBAUD failed copy_from_user\n"));
+ return(-EFAULT);
+ }
+
+ if (bd->bd_flags & BD_FEP5PLUS) {
+
+ DPR_IOCTL(("DIGI_SETCUSTOMBAUD. Setting %d\n", new_rate));
+
+ DGAP_LOCK(bd->bd_lock, lock_flags);
+ DGAP_LOCK(ch->ch_lock, lock_flags2);
+
+ ch->ch_custom_speed = new_rate;
+
+ dgap_param(tty);
+
+ DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+ DGAP_UNLOCK(bd->bd_lock, lock_flags);
+ }
+
+ DPR_IOCTL(("DIGI_SETCUSTOMBAUD finish\n"));
+
+ return(0);
+}
+
+
+/*
+ * dgap_set_termios()
+ */
+static void dgap_tty_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
+{
+ struct board_t *bd;
+ struct channel_t *ch;
+ struct un_t *un;
+ unsigned long lock_flags;
+ unsigned long lock_flags2;
+
+ if (!tty || tty->magic != TTY_MAGIC)
+ return;
+
+ un = tty->driver_data;
+ if (!un || un->magic != DGAP_UNIT_MAGIC)
+ return;
+
+ ch = un->un_ch;
+ if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
+ return;
+
+ bd = ch->ch_bd;
+ if (!bd || bd->magic != DGAP_BOARD_MAGIC)
+ return;
+
+ DGAP_LOCK(bd->bd_lock, lock_flags);
+ DGAP_LOCK(ch->ch_lock, lock_flags2);
+
+ ch->ch_c_cflag = tty->termios.c_cflag;
+ ch->ch_c_iflag = tty->termios.c_iflag;
+ ch->ch_c_oflag = tty->termios.c_oflag;
+ ch->ch_c_lflag = tty->termios.c_lflag;
+ ch->ch_startc = tty->termios.c_cc[VSTART];
+ ch->ch_stopc = tty->termios.c_cc[VSTOP];
+
+ dgap_carrier(ch);
+ dgap_param(tty);
+
+ DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+ DGAP_UNLOCK(bd->bd_lock, lock_flags);
+}
+
+
+static void dgap_tty_throttle(struct tty_struct *tty)
+{
+ struct board_t *bd;
+ struct channel_t *ch;
+ struct un_t *un;
+ ulong lock_flags;
+ ulong lock_flags2;
+
+ if (!tty || tty->magic != TTY_MAGIC)
+ return;
+
+ un = tty->driver_data;
+ if (!un || un->magic != DGAP_UNIT_MAGIC)
+ return;
+
+ ch = un->un_ch;
+ if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
+ return;
+
+ bd = ch->ch_bd;
+ if (!bd || bd->magic != DGAP_BOARD_MAGIC)
+ return;
+
+ DPR_IOCTL(("dgap_tty_throttle start\n"));
+
+ DGAP_LOCK(bd->bd_lock, lock_flags);
+ DGAP_LOCK(ch->ch_lock, lock_flags2);
+
+ ch->ch_flags |= (CH_RXBLOCK);
+#if 1
+ dgap_cmdw(ch, RPAUSE, 0, 0);
+#endif
+
+ DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+ DGAP_UNLOCK(bd->bd_lock, lock_flags);
+
+ DPR_IOCTL(("dgap_tty_throttle finish\n"));
+}
+
+
+static void dgap_tty_unthrottle(struct tty_struct *tty)
+{
+ struct board_t *bd;
+ struct channel_t *ch;
+ struct un_t *un;
+ ulong lock_flags;
+ ulong lock_flags2;
+
+ if (!tty || tty->magic != TTY_MAGIC)
+ return;
+
+ un = tty->driver_data;
+ if (!un || un->magic != DGAP_UNIT_MAGIC)
+ return;
+
+ ch = un->un_ch;
+ if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
+ return;
+
+ bd = ch->ch_bd;
+ if (!bd || bd->magic != DGAP_BOARD_MAGIC)
+ return;
+
+ DPR_IOCTL(("dgap_tty_unthrottle start\n"));
+
+ DGAP_LOCK(bd->bd_lock, lock_flags);
+ DGAP_LOCK(ch->ch_lock, lock_flags2);
+
+ ch->ch_flags &= ~(CH_RXBLOCK);
+
+#if 1
+ dgap_cmdw(ch, RRESUME, 0, 0);
+#endif
+
+ DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+ DGAP_UNLOCK(bd->bd_lock, lock_flags);
+
+ DPR_IOCTL(("dgap_tty_unthrottle finish\n"));
+}
+
+
+static void dgap_tty_start(struct tty_struct *tty)
+{
+ struct board_t *bd;
+ struct channel_t *ch;
+ struct un_t *un;
+ ulong lock_flags;
+ ulong lock_flags2;
+
+ if (!tty || tty->magic != TTY_MAGIC)
+ return;
+
+ un = tty->driver_data;
+ if (!un || un->magic != DGAP_UNIT_MAGIC)
+ return;
+
+ ch = un->un_ch;
+ if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
+ return;
+
+ bd = ch->ch_bd;
+ if (!bd || bd->magic != DGAP_BOARD_MAGIC)
+ return;
+
+ DPR_IOCTL(("dgap_tty_start start\n"));
+
+ DGAP_LOCK(bd->bd_lock, lock_flags);
+ DGAP_LOCK(ch->ch_lock, lock_flags2);
+
+ dgap_cmdw(ch, RESUMETX, 0, 0);
+
+ DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+ DGAP_UNLOCK(bd->bd_lock, lock_flags);
+
+ DPR_IOCTL(("dgap_tty_start finish\n"));
+}
+
+
+static void dgap_tty_stop(struct tty_struct *tty)
+{
+ struct board_t *bd;
+ struct channel_t *ch;
+ struct un_t *un;
+ ulong lock_flags;
+ ulong lock_flags2;
+
+ if (!tty || tty->magic != TTY_MAGIC)
+ return;
+
+ un = tty->driver_data;
+ if (!un || un->magic != DGAP_UNIT_MAGIC)
+ return;
+
+ ch = un->un_ch;
+ if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
+ return;
+
+ bd = ch->ch_bd;
+ if (!bd || bd->magic != DGAP_BOARD_MAGIC)
+ return;
+
+ DPR_IOCTL(("dgap_tty_stop start\n"));
+
+ DGAP_LOCK(bd->bd_lock, lock_flags);
+ DGAP_LOCK(ch->ch_lock, lock_flags2);
+
+ dgap_cmdw(ch, PAUSETX, 0, 0);
+
+ DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+ DGAP_UNLOCK(bd->bd_lock, lock_flags);
+
+ DPR_IOCTL(("dgap_tty_stop finish\n"));
+}
+
+
+/*
+ * dgap_tty_flush_chars()
+ *
+ * Flush the cook buffer
+ *
+ * Note to self, and any other poor souls who venture here:
+ *
+ * flush in this case DOES NOT mean dispose of the data.
+ * instead, it means "stop buffering and send it if you
+ * haven't already." Just guess how I figured that out... SRW 2-Jun-98
+ *
+ * It is also always called in interrupt context - JAR 8-Sept-99
+ */
+static void dgap_tty_flush_chars(struct tty_struct *tty)
+{
+ struct board_t *bd;
+ struct channel_t *ch;
+ struct un_t *un;
+ ulong lock_flags;
+ ulong lock_flags2;
+
+ if (!tty || tty->magic != TTY_MAGIC)
+ return;
+
+ un = tty->driver_data;
+ if (!un || un->magic != DGAP_UNIT_MAGIC)
+ return;
+
+ ch = un->un_ch;
+ if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
+ return;
+
+ bd = ch->ch_bd;
+ if (!bd || bd->magic != DGAP_BOARD_MAGIC)
+ return;
+
+ DPR_IOCTL(("dgap_tty_flush_chars start\n"));
+
+ DGAP_LOCK(bd->bd_lock, lock_flags);
+ DGAP_LOCK(ch->ch_lock, lock_flags2);
+
+ /* TODO: Do something here */
+
+ DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+ DGAP_UNLOCK(bd->bd_lock, lock_flags);
+
+ DPR_IOCTL(("dgap_tty_flush_chars finish\n"));
+}
+
+
+
+/*
+ * dgap_tty_flush_buffer()
+ *
+ * Flush Tx buffer (make in == out)
+ */
+static void dgap_tty_flush_buffer(struct tty_struct *tty)
+{
+ struct board_t *bd;
+ struct channel_t *ch;
+ struct un_t *un;
+ ulong lock_flags;
+ ulong lock_flags2;
+ u16 head = 0;
+
+ if (!tty || tty->magic != TTY_MAGIC)
+ return;
+
+ un = tty->driver_data;
+ if (!un || un->magic != DGAP_UNIT_MAGIC)
+ return;
+
+ ch = un->un_ch;
+ if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
+ return;
+
+ bd = ch->ch_bd;
+ if (!bd || bd->magic != DGAP_BOARD_MAGIC)
+ return;
+
+ DPR_IOCTL(("dgap_tty_flush_buffer on port: %d start\n", ch->ch_portnum));
+
+ DGAP_LOCK(bd->bd_lock, lock_flags);
+ DGAP_LOCK(ch->ch_lock, lock_flags2);
+
+ ch->ch_flags &= ~CH_STOP;
+ head = readw(&(ch->ch_bs->tx_head));
+ dgap_cmdw(ch, FLUSHTX, (u16) head, 0);
+ dgap_cmdw(ch, RESUMETX, 0, 0);
+ if (ch->ch_tun.un_flags & (UN_LOW|UN_EMPTY)) {
+ ch->ch_tun.un_flags &= ~(UN_LOW|UN_EMPTY);
+ wake_up_interruptible(&ch->ch_tun.un_flags_wait);
+ }
+ if (ch->ch_pun.un_flags & (UN_LOW|UN_EMPTY)) {
+ ch->ch_pun.un_flags &= ~(UN_LOW|UN_EMPTY);
+ wake_up_interruptible(&ch->ch_pun.un_flags_wait);
+ }
+
+ DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+ DGAP_UNLOCK(bd->bd_lock, lock_flags);
+ if (waitqueue_active(&tty->write_wait))
+ wake_up_interruptible(&tty->write_wait);
+ tty_wakeup(tty);
+
+ DPR_IOCTL(("dgap_tty_flush_buffer finish\n"));
+}
+
+
+
+/*****************************************************************************
+ *
+ * The IOCTL function and all of its helpers
+ *
+ *****************************************************************************/
+
+/*
+ * dgap_tty_ioctl()
+ *
+ * The usual assortment of ioctl's
+ */
+static int dgap_tty_ioctl(struct tty_struct *tty, unsigned int cmd,
+ unsigned long arg)
+{
+ struct board_t *bd;
+ struct channel_t *ch;
+ struct un_t *un;
+ int rc;
+ u16 head = 0;
+ ulong lock_flags = 0;
+ ulong lock_flags2 = 0;
+ void __user *uarg = (void __user *) arg;
+
+ if (!tty || tty->magic != TTY_MAGIC)
+ return (-ENODEV);
+
+ un = tty->driver_data;
+ if (!un || un->magic != DGAP_UNIT_MAGIC)
+ return (-ENODEV);
+
+ ch = un->un_ch;
+ if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
+ return (-ENODEV);
+
+ bd = ch->ch_bd;
+ if (!bd || bd->magic != DGAP_BOARD_MAGIC)
+ return (-ENODEV);
+
+ DPR_IOCTL(("dgap_tty_ioctl start on port %d - cmd %s (%x), arg %lx\n",
+ ch->ch_portnum, dgap_ioctl_name(cmd), cmd, arg));
+
+ DGAP_LOCK(bd->bd_lock, lock_flags);
+ DGAP_LOCK(ch->ch_lock, lock_flags2);
+
+ if (un->un_open_count <= 0) {
+ DPR_BASIC(("dgap_tty_ioctl - unit not open.\n"));
+ DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+ DGAP_UNLOCK(bd->bd_lock, lock_flags);
+ return(-EIO);
+ }
+
+ switch (cmd) {
+
+ /* Here are all the standard ioctl's that we MUST implement */
+
+ case TCSBRK:
+ /*
+ * TCSBRK is SVID version: non-zero arg --> no break
+ * this behaviour is exploited by tcdrain().
+ *
+ * According to POSIX.1 spec (7.2.2.1.2) breaks should be
+ * between 0.25 and 0.5 seconds so we'll ask for something
+ * in the middle: 0.375 seconds.
+ */
+ rc = tty_check_change(tty);
+ DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+ DGAP_UNLOCK(bd->bd_lock, lock_flags);
+ if (rc) {
+ return(rc);
+ }
+
+ rc = dgap_wait_for_drain(tty);
+
+ if (rc) {
+ DPR_IOCTL(("dgap_tty_ioctl - bad return: %d ", rc));
+ return(-EINTR);
+ }
+
+ DGAP_LOCK(bd->bd_lock, lock_flags);
+ DGAP_LOCK(ch->ch_lock, lock_flags2);
+
+ if(((cmd == TCSBRK) && (!arg)) || (cmd == TCSBRKP)) {
+ dgap_cmdw(ch, SBREAK, (u16) SBREAK_TIME, 0);
+ }
+
+ DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+ DGAP_UNLOCK(bd->bd_lock, lock_flags);
+
+ DPR_IOCTL(("dgap_tty_ioctl finish on port %d - cmd %s (%x), arg %lx\n",
+ ch->ch_portnum, dgap_ioctl_name(cmd), cmd, arg));
+
+ return(0);
+
+
+ case TCSBRKP:
+ /* support for POSIX tcsendbreak()
+
+ * According to POSIX.1 spec (7.2.2.1.2) breaks should be
+ * between 0.25 and 0.5 seconds so we'll ask for something
+ * in the middle: 0.375 seconds.
+ */
+ rc = tty_check_change(tty);
+ DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+ DGAP_UNLOCK(bd->bd_lock, lock_flags);
+ if (rc) {
+ return(rc);
+ }
+
+ rc = dgap_wait_for_drain(tty);
+ if (rc) {
+ DPR_IOCTL(("dgap_tty_ioctl - bad return: %d ", rc));
+ return(-EINTR);
+ }
+
+ DGAP_LOCK(bd->bd_lock, lock_flags);
+ DGAP_LOCK(ch->ch_lock, lock_flags2);
+
+ dgap_cmdw(ch, SBREAK, (u16) SBREAK_TIME, 0);
+
+ DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+ DGAP_UNLOCK(bd->bd_lock, lock_flags);
+
+ DPR_IOCTL(("dgap_tty_ioctl finish on port %d - cmd %s (%x), arg %lx\n",
+ ch->ch_portnum, dgap_ioctl_name(cmd), cmd, arg));
+
+ return(0);
+
+ case TIOCSBRK:
+ /*
+ * FEP5 doesn't support turning on a break unconditionally.
+ * The FEP5 device will stop sending a break automatically
+ * after the specified time value that was sent when turning on
+ * the break.
+ */
+ rc = tty_check_change(tty);
+ DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+ DGAP_UNLOCK(bd->bd_lock, lock_flags);
+ if (rc) {
+ return(rc);
+ }
+
+ rc = dgap_wait_for_drain(tty);
+ if (rc) {
+ DPR_IOCTL(("dgap_tty_ioctl - bad return: %d ", rc));
+ return(-EINTR);
+ }
+
+ DGAP_LOCK(bd->bd_lock, lock_flags);
+ DGAP_LOCK(ch->ch_lock, lock_flags2);
+
+ dgap_cmdw(ch, SBREAK, (u16) SBREAK_TIME, 0);
+
+ DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+ DGAP_UNLOCK(bd->bd_lock, lock_flags);
+
+ DPR_IOCTL(("dgap_tty_ioctl finish on port %d - cmd %s (%x), arg %lx\n",
+ ch->ch_portnum, dgap_ioctl_name(cmd), cmd, arg));
+
+ return 0;
+
+ case TIOCCBRK:
+ /*
+ * FEP5 doesn't support turning off a break unconditionally.
+ * The FEP5 device will stop sending a break automatically
+ * after the specified time value that was sent when turning on
+ * the break.
+ */
+ DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+ DGAP_UNLOCK(bd->bd_lock, lock_flags);
+ return 0;
+
+ case TIOCGSOFTCAR:
+
+ DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+ DGAP_UNLOCK(bd->bd_lock, lock_flags);
+
+ rc = put_user(C_CLOCAL(tty) ? 1 : 0, (unsigned long __user *) arg);
+ return(rc);
+
+ case TIOCSSOFTCAR:
+ DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+ DGAP_UNLOCK(bd->bd_lock, lock_flags);
+
+ rc = get_user(arg, (unsigned long __user *) arg);
+ if (rc)
+ return(rc);
+
+ DGAP_LOCK(bd->bd_lock, lock_flags);
+ DGAP_LOCK(ch->ch_lock, lock_flags2);
+ tty->termios.c_cflag = ((tty->termios.c_cflag & ~CLOCAL) | (arg ? CLOCAL : 0));
+ dgap_param(tty);
+ DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+ DGAP_UNLOCK(bd->bd_lock, lock_flags);
+
+ return(0);
+
+ case TIOCMGET:
+ DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+ DGAP_UNLOCK(bd->bd_lock, lock_flags);
+ return(dgap_get_modem_info(ch, uarg));
+
+ case TIOCMBIS:
+ case TIOCMBIC:
+ case TIOCMSET:
+ DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+ DGAP_UNLOCK(bd->bd_lock, lock_flags);
+ return(dgap_set_modem_info(tty, cmd, uarg));
+
+ /*
+ * Here are any additional ioctl's that we want to implement
+ */
+
+ case TCFLSH:
+ /*
+ * The linux tty driver doesn't have a flush
+ * input routine for the driver, assuming all backed
+ * up data is in the line disc. buffers. However,
+ * we all know that's not the case. Here, we
+ * act on the ioctl, but then lie and say we didn't
+ * so the line discipline will process the flush
+ * also.
+ */
+ rc = tty_check_change(tty);
+ if (rc) {
+ DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+ DGAP_UNLOCK(bd->bd_lock, lock_flags);
+ return(rc);
+ }
+
+ if ((arg == TCIFLUSH) || (arg == TCIOFLUSH)) {
+ if (!(un->un_type == DGAP_PRINT)) {
+ head = readw(&(ch->ch_bs->rx_head));
+ writew(head, &(ch->ch_bs->rx_tail));
+ writeb(0, &(ch->ch_bs->orun));
+ }
+ }
+
+ if ((arg == TCOFLUSH) || (arg == TCIOFLUSH)) {
+ ch->ch_flags &= ~CH_STOP;
+ head = readw(&(ch->ch_bs->tx_head));
+ dgap_cmdw(ch, FLUSHTX, (u16) head, 0 );
+ dgap_cmdw(ch, RESUMETX, 0, 0);
+ if (ch->ch_tun.un_flags & (UN_LOW|UN_EMPTY)) {
+ ch->ch_tun.un_flags &= ~(UN_LOW|UN_EMPTY);
+ wake_up_interruptible(&ch->ch_tun.un_flags_wait);
+ }
+ if (ch->ch_pun.un_flags & (UN_LOW|UN_EMPTY)) {
+ ch->ch_pun.un_flags &= ~(UN_LOW|UN_EMPTY);
+ wake_up_interruptible(&ch->ch_pun.un_flags_wait);
+ }
+ if (waitqueue_active(&tty->write_wait))
+ wake_up_interruptible(&tty->write_wait);
+
+ /* Can't hold any locks when calling tty_wakeup! */
+ DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+ DGAP_UNLOCK(bd->bd_lock, lock_flags);
+ tty_wakeup(tty);
+ DGAP_LOCK(bd->bd_lock, lock_flags);
+ DGAP_LOCK(ch->ch_lock, lock_flags2);
+ }
+
+ /* pretend we didn't recognize this IOCTL */
+ DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+ DGAP_UNLOCK(bd->bd_lock, lock_flags);
+
+ DPR_IOCTL(("dgap_tty_ioctl (LINE:%d) finish on port %d - cmd %s (%x), arg %lx\n",
+ __LINE__, ch->ch_portnum, dgap_ioctl_name(cmd), cmd, arg));
+
+ return(-ENOIOCTLCMD);
+
+ case TCSETSF:
+ case TCSETSW:
+ /*
+ * The linux tty driver doesn't have a flush
+ * input routine for the driver, assuming all backed
+ * up data is in the line disc. buffers. However,
+ * we all know that's not the case. Here, we
+ * act on the ioctl, but then lie and say we didn't
+ * so the line discipline will process the flush
+ * also.
+ */
+ if (cmd == TCSETSF) {
+ /* flush rx */
+ ch->ch_flags &= ~CH_STOP;
+ head = readw(&(ch->ch_bs->rx_head));
+ writew(head, &(ch->ch_bs->rx_tail));
+ }
+
+ /* now wait for all the output to drain */
+ DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+ DGAP_UNLOCK(bd->bd_lock, lock_flags);
+ rc = dgap_wait_for_drain(tty);
+ if (rc) {
+ DPR_IOCTL(("dgap_tty_ioctl - bad return: %d ", rc));
+ return(-EINTR);
+ }
+
+ DPR_IOCTL(("dgap_tty_ioctl finish on port %d - cmd %s (%x), arg %lx\n",
+ ch->ch_portnum, dgap_ioctl_name(cmd), cmd, arg));
+
+ /* pretend we didn't recognize this */
+ return(-ENOIOCTLCMD);
+
+ case TCSETAW:
+
+ DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+ DGAP_UNLOCK(bd->bd_lock, lock_flags);
+ rc = dgap_wait_for_drain(tty);
+ if (rc) {
+ DPR_IOCTL(("dgap_tty_ioctl - bad return: %d ", rc));
+ return(-EINTR);
+ }
+
+ /* pretend we didn't recognize this */
+ return(-ENOIOCTLCMD);
+
+ case TCXONC:
+ /*
+ * The Linux Line Discipline (LD) would do this for us if we
+ * let it, but we have the special firmware options to do this
+ * the "right way" regardless of hardware or software flow
+ * control so we'll do it outselves instead of letting the LD
+ * do it.
+ */
+ rc = tty_check_change(tty);
+ if (rc) {
+ DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+ DGAP_UNLOCK(bd->bd_lock, lock_flags);
+ return(rc);
+ }
+
+ DPR_IOCTL(("dgap_ioctl - in TCXONC - %d\n", cmd));
+ switch (arg) {
+
+ case TCOON:
+ DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+ DGAP_UNLOCK(bd->bd_lock, lock_flags);
+ dgap_tty_start(tty);
+ return(0);
+ case TCOOFF:
+ DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+ DGAP_UNLOCK(bd->bd_lock, lock_flags);
+ dgap_tty_stop(tty);
+ return(0);
+ case TCION:
+ DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+ DGAP_UNLOCK(bd->bd_lock, lock_flags);
+ /* Make the ld do it */
+ return(-ENOIOCTLCMD);
+ case TCIOFF:
+ DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+ DGAP_UNLOCK(bd->bd_lock, lock_flags);
+ /* Make the ld do it */
+ return(-ENOIOCTLCMD);
+ default:
+ DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+ DGAP_UNLOCK(bd->bd_lock, lock_flags);
+ return(-EINVAL);
+ }
+
+ case DIGI_GETA:
+ /* get information for ditty */
+ DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+ DGAP_UNLOCK(bd->bd_lock, lock_flags);
+ return(dgap_tty_digigeta(tty, uarg));
+
+ case DIGI_SETAW:
+ case DIGI_SETAF:
+
+ /* set information for ditty */
+ if (cmd == (DIGI_SETAW)) {
+
+ DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+ DGAP_UNLOCK(bd->bd_lock, lock_flags);
+ rc = dgap_wait_for_drain(tty);
+ if (rc) {
+ DPR_IOCTL(("dgap_tty_ioctl - bad return: %d ", rc));
+ return(-EINTR);
+ }
+ DGAP_LOCK(bd->bd_lock, lock_flags);
+ DGAP_LOCK(ch->ch_lock, lock_flags2);
+ }
+ else {
+ tty_ldisc_flush(tty);
+ }
+ /* fall thru */
+
+ case DIGI_SETA:
+ DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+ DGAP_UNLOCK(bd->bd_lock, lock_flags);
+ return(dgap_tty_digiseta(tty, uarg));
+
+ case DIGI_GEDELAY:
+ DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+ DGAP_UNLOCK(bd->bd_lock, lock_flags);
+ return(dgap_tty_digigetedelay(tty, uarg));
+
+ case DIGI_SEDELAY:
+ DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+ DGAP_UNLOCK(bd->bd_lock, lock_flags);
+ return(dgap_tty_digisetedelay(tty, uarg));
+
+ case DIGI_GETCUSTOMBAUD:
+ DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+ DGAP_UNLOCK(bd->bd_lock, lock_flags);
+ return(dgap_tty_digigetcustombaud(tty, uarg));
+
+ case DIGI_SETCUSTOMBAUD:
+ DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+ DGAP_UNLOCK(bd->bd_lock, lock_flags);
+ return(dgap_tty_digisetcustombaud(tty, uarg));
+
+ case DIGI_RESET_PORT:
+ dgap_firmware_reset_port(ch);
+ dgap_param(tty);
+ DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+ DGAP_UNLOCK(bd->bd_lock, lock_flags);
+ return 0;
+
+ default:
+ DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+ DGAP_UNLOCK(bd->bd_lock, lock_flags);
+
+ DPR_IOCTL(("dgap_tty_ioctl - in default\n"));
+ DPR_IOCTL(("dgap_tty_ioctl end - cmd %s (%x), arg %lx\n",
+ dgap_ioctl_name(cmd), cmd, arg));
+
+ return(-ENOIOCTLCMD);
+ }
+}
+++ /dev/null
-/*
- * Copyright 2003 Digi International (www.digi.com)
- * Scott H Kilau <Scott_Kilau at digi dot com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the
- * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
- * PURPOSE. See the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *
- * NOTE TO LINUX KERNEL HACKERS: DO NOT REFORMAT THIS CODE!
- *
- * This is shared code between Digi's CVS archive and the
- * Linux Kernel sources.
- * Changing the source just for reformatting needlessly breaks
- * our CVS diff history.
- *
- * Send any bug fixes/changes to: Eng.Linux at digi dot com.
- * Thank you.
- */
-
-/************************************************************************
- *
- * This file implements the tty driver functionality for the
- * FEP5 based product lines.
- *
- ************************************************************************
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h> /* For jiffies, task states */
-#include <linux/interrupt.h> /* For tasklet and interrupt structs/defines */
-#include <linux/module.h>
-#include <linux/ctype.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/serial_reg.h>
-#include <linux/slab.h>
-#include <linux/delay.h> /* For udelay */
-#include <asm/uaccess.h> /* For copy_from_user/copy_to_user */
-#include <asm/io.h> /* For read[bwl]/write[bwl] */
-#include <linux/pci.h>
-
-#include "dgap_driver.h"
-#include "dgap_tty.h"
-#include "dgap_types.h"
-#include "dgap_fep5.h"
-#include "dgap_parse.h"
-#include "dgap_conf.h"
-#include "dgap_sysfs.h"
-
-#define init_MUTEX(sem) sema_init(sem, 1)
-#define DECLARE_MUTEX(name) \
- struct semaphore name = __SEMAPHORE_INITIALIZER(name, 1)
-
-/*
- * internal variables
- */
-static struct board_t *dgap_BoardsByMajor[256];
-static uchar *dgap_TmpWriteBuf = NULL;
-static DECLARE_MUTEX(dgap_TmpWriteSem);
-
-/*
- * Default transparent print information.
- */
-static struct digi_t dgap_digi_init = {
- .digi_flags = DIGI_COOK, /* Flags */
- .digi_maxcps = 100, /* Max CPS */
- .digi_maxchar = 50, /* Max chars in print queue */
- .digi_bufsize = 100, /* Printer buffer size */
- .digi_onlen = 4, /* size of printer on string */
- .digi_offlen = 4, /* size of printer off string */
- .digi_onstr = "\033[5i", /* ANSI printer on string ] */
- .digi_offstr = "\033[4i", /* ANSI printer off string ] */
- .digi_term = "ansi" /* default terminal type */
-};
-
-
-/*
- * Define a local default termios struct. All ports will be created
- * with this termios initially.
- *
- * This defines a raw port at 9600 baud, 8 data bits, no parity,
- * 1 stop bit.
- */
-
-static struct ktermios DgapDefaultTermios =
-{
- .c_iflag = (DEFAULT_IFLAGS), /* iflags */
- .c_oflag = (DEFAULT_OFLAGS), /* oflags */
- .c_cflag = (DEFAULT_CFLAGS), /* cflags */
- .c_lflag = (DEFAULT_LFLAGS), /* lflags */
- .c_cc = INIT_C_CC,
- .c_line = 0,
-};
-
-/* Our function prototypes */
-static int dgap_tty_open(struct tty_struct *tty, struct file *file);
-static void dgap_tty_close(struct tty_struct *tty, struct file *file);
-static int dgap_block_til_ready(struct tty_struct *tty, struct file *file, struct channel_t *ch);
-static int dgap_tty_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg);
-static int dgap_tty_digigeta(struct tty_struct *tty, struct digi_t __user *retinfo);
-static int dgap_tty_digiseta(struct tty_struct *tty, struct digi_t __user *new_info);
-static int dgap_tty_digigetedelay(struct tty_struct *tty, int __user *retinfo);
-static int dgap_tty_digisetedelay(struct tty_struct *tty, int __user *new_info);
-static int dgap_tty_write_room(struct tty_struct* tty);
-static int dgap_tty_chars_in_buffer(struct tty_struct* tty);
-static void dgap_tty_start(struct tty_struct *tty);
-static void dgap_tty_stop(struct tty_struct *tty);
-static void dgap_tty_throttle(struct tty_struct *tty);
-static void dgap_tty_unthrottle(struct tty_struct *tty);
-static void dgap_tty_flush_chars(struct tty_struct *tty);
-static void dgap_tty_flush_buffer(struct tty_struct *tty);
-static void dgap_tty_hangup(struct tty_struct *tty);
-static int dgap_wait_for_drain(struct tty_struct *tty);
-static int dgap_set_modem_info(struct tty_struct *tty, unsigned int command, unsigned int __user *value);
-static int dgap_get_modem_info(struct channel_t *ch, unsigned int __user *value);
-static int dgap_tty_digisetcustombaud(struct tty_struct *tty, int __user *new_info);
-static int dgap_tty_digigetcustombaud(struct tty_struct *tty, int __user *retinfo);
-static int dgap_tty_tiocmget(struct tty_struct *tty);
-static int dgap_tty_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear);
-static int dgap_tty_send_break(struct tty_struct *tty, int msec);
-static void dgap_tty_wait_until_sent(struct tty_struct *tty, int timeout);
-static int dgap_tty_write(struct tty_struct *tty, const unsigned char *buf, int count);
-static void dgap_tty_set_termios(struct tty_struct *tty, struct ktermios *old_termios);
-static int dgap_tty_put_char(struct tty_struct *tty, unsigned char c);
-static void dgap_tty_send_xchar(struct tty_struct *tty, char ch);
-
-static const struct tty_operations dgap_tty_ops = {
- .open = dgap_tty_open,
- .close = dgap_tty_close,
- .write = dgap_tty_write,
- .write_room = dgap_tty_write_room,
- .flush_buffer = dgap_tty_flush_buffer,
- .chars_in_buffer = dgap_tty_chars_in_buffer,
- .flush_chars = dgap_tty_flush_chars,
- .ioctl = dgap_tty_ioctl,
- .set_termios = dgap_tty_set_termios,
- .stop = dgap_tty_stop,
- .start = dgap_tty_start,
- .throttle = dgap_tty_throttle,
- .unthrottle = dgap_tty_unthrottle,
- .hangup = dgap_tty_hangup,
- .put_char = dgap_tty_put_char,
- .tiocmget = dgap_tty_tiocmget,
- .tiocmset = dgap_tty_tiocmset,
- .break_ctl = dgap_tty_send_break,
- .wait_until_sent = dgap_tty_wait_until_sent,
- .send_xchar = dgap_tty_send_xchar
-};
-
-
-
-
-
-/************************************************************************
- *
- * TTY Initialization/Cleanup Functions
- *
- ************************************************************************/
-
-/*
- * dgap_tty_preinit()
- *
- * Initialize any global tty related data before we download any boards.
- */
-int dgap_tty_preinit(void)
-{
- unsigned long flags;
-
- DGAP_LOCK(dgap_global_lock, flags);
-
- /*
- * Allocate a buffer for doing the copy from user space to
- * kernel space in dgap_input(). We only use one buffer and
- * control access to it with a semaphore. If we are paging, we
- * are already in trouble so one buffer won't hurt much anyway.
- */
- dgap_TmpWriteBuf = kmalloc(WRITEBUFLEN, GFP_ATOMIC);
-
- if (!dgap_TmpWriteBuf) {
- DGAP_UNLOCK(dgap_global_lock, flags);
- DPR_INIT(("unable to allocate tmp write buf"));
- return (-ENOMEM);
- }
-
- DGAP_UNLOCK(dgap_global_lock, flags);
- return(0);
-}
-
-
-/*
- * dgap_tty_register()
- *
- * Init the tty subsystem for this board.
- */
-int dgap_tty_register(struct board_t *brd)
-{
- int rc = 0;
-
- DPR_INIT(("tty_register start"));
-
- brd->SerialDriver = alloc_tty_driver(MAXPORTS);
-
- snprintf(brd->SerialName, MAXTTYNAMELEN, "tty_dgap_%d_", brd->boardnum);
- brd->SerialDriver->name = brd->SerialName;
- brd->SerialDriver->name_base = 0;
- brd->SerialDriver->major = 0;
- brd->SerialDriver->minor_start = 0;
- brd->SerialDriver->type = TTY_DRIVER_TYPE_SERIAL;
- brd->SerialDriver->subtype = SERIAL_TYPE_NORMAL;
- brd->SerialDriver->init_termios = DgapDefaultTermios;
- brd->SerialDriver->driver_name = DRVSTR;
- brd->SerialDriver->flags = (TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV | TTY_DRIVER_HARDWARE_BREAK);
-
- /* The kernel wants space to store pointers to tty_structs */
- brd->SerialDriver->ttys = kzalloc(MAXPORTS * sizeof(struct tty_struct *), GFP_KERNEL);
- if (!brd->SerialDriver->ttys)
- return(-ENOMEM);
-
- /*
- * Entry points for driver. Called by the kernel from
- * tty_io.c and n_tty.c.
- */
- tty_set_operations(brd->SerialDriver, &dgap_tty_ops);
-
- /*
- * If we're doing transparent print, we have to do all of the above
- * again, separately so we don't get the LD confused about what major
- * we are when we get into the dgap_tty_open() routine.
- */
- brd->PrintDriver = alloc_tty_driver(MAXPORTS);
-
- snprintf(brd->PrintName, MAXTTYNAMELEN, "pr_dgap_%d_", brd->boardnum);
- brd->PrintDriver->name = brd->PrintName;
- brd->PrintDriver->name_base = 0;
- brd->PrintDriver->major = 0;
- brd->PrintDriver->minor_start = 0;
- brd->PrintDriver->type = TTY_DRIVER_TYPE_SERIAL;
- brd->PrintDriver->subtype = SERIAL_TYPE_NORMAL;
- brd->PrintDriver->init_termios = DgapDefaultTermios;
- brd->PrintDriver->driver_name = DRVSTR;
- brd->PrintDriver->flags = (TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV | TTY_DRIVER_HARDWARE_BREAK);
-
- /* The kernel wants space to store pointers to tty_structs */
- brd->PrintDriver->ttys = kzalloc(MAXPORTS * sizeof(struct tty_struct *), GFP_KERNEL);
- if (!brd->PrintDriver->ttys)
- return(-ENOMEM);
-
- /*
- * Entry points for driver. Called by the kernel from
- * tty_io.c and n_tty.c.
- */
- tty_set_operations(brd->PrintDriver, &dgap_tty_ops);
-
- if (!brd->dgap_Major_Serial_Registered) {
- /* Register tty devices */
- rc = tty_register_driver(brd->SerialDriver);
- if (rc < 0) {
- APR(("Can't register tty device (%d)\n", rc));
- return(rc);
- }
- brd->dgap_Major_Serial_Registered = TRUE;
- dgap_BoardsByMajor[brd->SerialDriver->major] = brd;
- brd->dgap_Serial_Major = brd->SerialDriver->major;
- }
-
- if (!brd->dgap_Major_TransparentPrint_Registered) {
- /* Register Transparent Print devices */
- rc = tty_register_driver(brd->PrintDriver);
- if (rc < 0) {
- APR(("Can't register Transparent Print device (%d)\n", rc));
- return(rc);
- }
- brd->dgap_Major_TransparentPrint_Registered = TRUE;
- dgap_BoardsByMajor[brd->PrintDriver->major] = brd;
- brd->dgap_TransparentPrint_Major = brd->PrintDriver->major;
- }
-
- DPR_INIT(("DGAP REGISTER TTY: MAJORS: %d %d\n", brd->SerialDriver->major,
- brd->PrintDriver->major));
-
- return (rc);
-}
-
-
-/*
- * dgap_tty_init()
- *
- * Init the tty subsystem. Called once per board after board has been
- * downloaded and init'ed.
- */
-int dgap_tty_init(struct board_t *brd)
-{
- int i;
- int tlw;
- uint true_count = 0;
- uchar *vaddr;
- uchar modem = 0;
- struct channel_t *ch;
- struct bs_t *bs;
- struct cm_t *cm;
-
- if (!brd)
- return (-ENXIO);
-
- DPR_INIT(("dgap_tty_init start\n"));
-
- /*
- * Initialize board structure elements.
- */
-
- vaddr = brd->re_map_membase;
- true_count = readw((vaddr + NCHAN));
-
- brd->nasync = dgap_config_get_number_of_ports(brd);
-
- if (!brd->nasync) {
- brd->nasync = brd->maxports;
- }
-
- if (brd->nasync > brd->maxports) {
- brd->nasync = brd->maxports;
- }
-
- if (true_count != brd->nasync) {
- if ((brd->type == PPCM) && (true_count == 64)) {
- APR(("***WARNING**** %s configured for %d ports, has %d ports.\nPlease make SURE the EBI cable running from the card\nto each EM module is plugged into EBI IN!\n",
- brd->name, brd->nasync, true_count));
- }
- else if ((brd->type == PPCM) && (true_count == 0)) {
- APR(("***WARNING**** %s configured for %d ports, has %d ports.\nPlease make SURE the EBI cable running from the card\nto each EM module is plugged into EBI IN!\n",
- brd->name, brd->nasync, true_count));
- }
- else {
- APR(("***WARNING**** %s configured for %d ports, has %d ports.\n",
- brd->name, brd->nasync, true_count));
- }
-
- brd->nasync = true_count;
-
- /* If no ports, don't bother going any further */
- if (!brd->nasync) {
- brd->state = BOARD_FAILED;
- brd->dpastatus = BD_NOFEP;
- return(-ENXIO);
- }
- }
-
- /*
- * Allocate channel memory that might not have been allocated
- * when the driver was first loaded.
- */
- for (i = 0; i < brd->nasync; i++) {
- if (!brd->channels[i]) {
- brd->channels[i] = kzalloc(sizeof(struct channel_t), GFP_ATOMIC);
- if (!brd->channels[i]) {
- DPR_CORE(("%s:%d Unable to allocate memory for channel struct\n",
- __FILE__, __LINE__));
- }
- }
- }
-
- ch = brd->channels[0];
- vaddr = brd->re_map_membase;
-
- bs = (struct bs_t *) ((ulong) vaddr + CHANBUF);
- cm = (struct cm_t *) ((ulong) vaddr + CMDBUF);
-
- brd->bd_bs = bs;
-
- /* Set up channel variables */
- for (i = 0; i < brd->nasync; i++, ch = brd->channels[i], bs++) {
-
- if (!brd->channels[i])
- continue;
-
- DGAP_SPINLOCK_INIT(ch->ch_lock);
-
- /* Store all our magic numbers */
- ch->magic = DGAP_CHANNEL_MAGIC;
- ch->ch_tun.magic = DGAP_UNIT_MAGIC;
- ch->ch_tun.un_type = DGAP_SERIAL;
- ch->ch_tun.un_ch = ch;
- ch->ch_tun.un_dev = i;
-
- ch->ch_pun.magic = DGAP_UNIT_MAGIC;
- ch->ch_pun.un_type = DGAP_PRINT;
- ch->ch_pun.un_ch = ch;
- ch->ch_pun.un_dev = i;
-
- ch->ch_vaddr = vaddr;
- ch->ch_bs = bs;
- ch->ch_cm = cm;
- ch->ch_bd = brd;
- ch->ch_portnum = i;
- ch->ch_digi = dgap_digi_init;
-
- /*
- * Set up digi dsr and dcd bits based on altpin flag.
- */
- if (dgap_config_get_altpin(brd)) {
- ch->ch_dsr = DM_CD;
- ch->ch_cd = DM_DSR;
- ch->ch_digi.digi_flags |= DIGI_ALTPIN;
- }
- else {
- ch->ch_cd = DM_CD;
- ch->ch_dsr = DM_DSR;
- }
-
- ch->ch_taddr = vaddr + ((ch->ch_bs->tx_seg) << 4);
- ch->ch_raddr = vaddr + ((ch->ch_bs->rx_seg) << 4);
- ch->ch_tx_win = 0;
- ch->ch_rx_win = 0;
- ch->ch_tsize = readw(&(ch->ch_bs->tx_max)) + 1;
- ch->ch_rsize = readw(&(ch->ch_bs->rx_max)) + 1;
- ch->ch_tstart = 0;
- ch->ch_rstart = 0;
-
- /* .25 second delay */
- ch->ch_close_delay = 250;
-
- /*
- * Set queue water marks, interrupt mask,
- * and general tty parameters.
- */
- ch->ch_tlw = tlw = ch->ch_tsize >= 2000 ? ((ch->ch_tsize * 5) / 8) : ch->ch_tsize / 2;
-
- dgap_cmdw(ch, STLOW, tlw, 0);
-
- dgap_cmdw(ch, SRLOW, ch->ch_rsize / 2, 0);
-
- dgap_cmdw(ch, SRHIGH, 7 * ch->ch_rsize / 8, 0);
-
- ch->ch_mistat = readb(&(ch->ch_bs->m_stat));
-
- init_waitqueue_head(&ch->ch_flags_wait);
- init_waitqueue_head(&ch->ch_tun.un_flags_wait);
- init_waitqueue_head(&ch->ch_pun.un_flags_wait);
- init_waitqueue_head(&ch->ch_sniff_wait);
-
- /* Turn on all modem interrupts for now */
- modem = (DM_CD | DM_DSR | DM_CTS | DM_RI);
- writeb(modem, &(ch->ch_bs->m_int));
-
- /*
- * Set edelay to 0 if interrupts are turned on,
- * otherwise set edelay to the usual 100.
- */
- if (brd->intr_used)
- writew(0, &(ch->ch_bs->edelay));
- else
- writew(100, &(ch->ch_bs->edelay));
-
- writeb(1, &(ch->ch_bs->idata));
- }
-
-
- DPR_INIT(("dgap_tty_init finish\n"));
-
- return (0);
-}
-
-
-/*
- * dgap_tty_post_uninit()
- *
- * UnInitialize any global tty related data.
- */
-void dgap_tty_post_uninit(void)
-{
- kfree(dgap_TmpWriteBuf);
- dgap_TmpWriteBuf = NULL;
-}
-
-
-/*
- * dgap_tty_uninit()
- *
- * Uninitialize the TTY portion of this driver. Free all memory and
- * resources.
- */
-void dgap_tty_uninit(struct board_t *brd)
-{
- int i = 0;
-
- if (brd->dgap_Major_Serial_Registered) {
- dgap_BoardsByMajor[brd->SerialDriver->major] = NULL;
- brd->dgap_Serial_Major = 0;
- for (i = 0; i < brd->nasync; i++) {
- dgap_remove_tty_sysfs(brd->channels[i]->ch_tun.un_sysfs);
- tty_unregister_device(brd->SerialDriver, i);
- }
- tty_unregister_driver(brd->SerialDriver);
- kfree(brd->SerialDriver->ttys);
- brd->SerialDriver->ttys = NULL;
- put_tty_driver(brd->SerialDriver);
- brd->dgap_Major_Serial_Registered = FALSE;
- }
-
- if (brd->dgap_Major_TransparentPrint_Registered) {
- dgap_BoardsByMajor[brd->PrintDriver->major] = NULL;
- brd->dgap_TransparentPrint_Major = 0;
- for (i = 0; i < brd->nasync; i++) {
- dgap_remove_tty_sysfs(brd->channels[i]->ch_pun.un_sysfs);
- tty_unregister_device(brd->PrintDriver, i);
- }
- tty_unregister_driver(brd->PrintDriver);
- kfree(brd->PrintDriver->ttys);
- brd->PrintDriver->ttys = NULL;
- put_tty_driver(brd->PrintDriver);
- brd->dgap_Major_TransparentPrint_Registered = FALSE;
- }
-}
-
-
-#define TMPBUFLEN (1024)
-
-/*
- * dgap_sniff - Dump data out to the "sniff" buffer if the
- * proc sniff file is opened...
- */
-static void dgap_sniff_nowait_nolock(struct channel_t *ch, uchar *text, uchar *buf, int len)
-{
- struct timeval tv;
- int n;
- int r;
- int nbuf;
- int i;
- int tmpbuflen;
- char tmpbuf[TMPBUFLEN];
- char *p = tmpbuf;
- int too_much_data;
-
- /* Leave if sniff not open */
- if (!(ch->ch_sniff_flags & SNIFF_OPEN))
- return;
-
- do_gettimeofday(&tv);
-
- /* Create our header for data dump */
- p += sprintf(p, "<%ld %ld><%s><", tv.tv_sec, tv.tv_usec, text);
- tmpbuflen = p - tmpbuf;
-
- do {
- too_much_data = 0;
-
- for (i = 0; i < len && tmpbuflen < (TMPBUFLEN - 4); i++) {
- p += sprintf(p, "%02x ", *buf);
- buf++;
- tmpbuflen = p - tmpbuf;
- }
-
- if (tmpbuflen < (TMPBUFLEN - 4)) {
- if (i > 0)
- p += sprintf(p - 1, "%s\n", ">");
- else
- p += sprintf(p, "%s\n", ">");
- } else {
- too_much_data = 1;
- len -= i;
- }
-
- nbuf = strlen(tmpbuf);
- p = tmpbuf;
-
- /*
- * Loop while data remains.
- */
- while (nbuf > 0 && ch->ch_sniff_buf) {
- /*
- * Determine the amount of available space left in the
- * buffer. If there's none, wait until some appears.
- */
- n = (ch->ch_sniff_out - ch->ch_sniff_in - 1) & SNIFF_MASK;
-
- /*
- * If there is no space left to write to in our sniff buffer,
- * we have no choice but to drop the data.
- * We *cannot* sleep here waiting for space, because this
- * function was probably called by the interrupt/timer routines!
- */
- if (n == 0) {
- return;
- }
-
- /*
- * Copy as much data as will fit.
- */
-
- if (n > nbuf)
- n = nbuf;
-
- r = SNIFF_MAX - ch->ch_sniff_in;
-
- if (r <= n) {
- memcpy(ch->ch_sniff_buf + ch->ch_sniff_in, p, r);
-
- n -= r;
- ch->ch_sniff_in = 0;
- p += r;
- nbuf -= r;
- }
-
- memcpy(ch->ch_sniff_buf + ch->ch_sniff_in, p, n);
-
- ch->ch_sniff_in += n;
- p += n;
- nbuf -= n;
-
- /*
- * Wakeup any thread waiting for data
- */
- if (ch->ch_sniff_flags & SNIFF_WAIT_DATA) {
- ch->ch_sniff_flags &= ~SNIFF_WAIT_DATA;
- wake_up_interruptible(&ch->ch_sniff_wait);
- }
- }
-
- /*
- * If the user sent us too much data to push into our tmpbuf,
- * we need to keep looping around on all the data.
- */
- if (too_much_data) {
- p = tmpbuf;
- tmpbuflen = 0;
- }
-
- } while (too_much_data);
-}
-
-
-/*=======================================================================
- *
- * dgap_input - Process received data.
- *
- * ch - Pointer to channel structure.
- *
- *=======================================================================*/
-
-void dgap_input(struct channel_t *ch)
-{
- struct board_t *bd;
- struct bs_t *bs;
- struct tty_struct *tp;
- struct tty_ldisc *ld;
- uint rmask;
- uint head;
- uint tail;
- int data_len;
- ulong lock_flags;
- ulong lock_flags2;
- int flip_len;
- int len = 0;
- int n = 0;
- uchar *buf;
- uchar tmpchar;
- int s = 0;
-
- if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
- return;
-
- tp = ch->ch_tun.un_tty;
-
- bs = ch->ch_bs;
- if (!bs) {
- return;
- }
-
- bd = ch->ch_bd;
- if(!bd || bd->magic != DGAP_BOARD_MAGIC)
- return;
-
- DPR_READ(("dgap_input start\n"));
-
- DGAP_LOCK(bd->bd_lock, lock_flags);
- DGAP_LOCK(ch->ch_lock, lock_flags2);
-
- /*
- * Figure the number of characters in the buffer.
- * Exit immediately if none.
- */
-
- rmask = ch->ch_rsize - 1;
-
- head = readw(&(bs->rx_head));
- head &= rmask;
- tail = readw(&(bs->rx_tail));
- tail &= rmask;
-
- data_len = (head - tail) & rmask;
-
- if (data_len == 0) {
- writeb(1, &(bs->idata));
- DGAP_UNLOCK(ch->ch_lock, lock_flags2);
- DGAP_UNLOCK(bd->bd_lock, lock_flags);
- DPR_READ(("No data on port %d\n", ch->ch_portnum));
- return;
- }
-
- /*
- * If the device is not open, or CREAD is off, flush
- * input data and return immediately.
- */
- if ((bd->state != BOARD_READY) || !tp || (tp->magic != TTY_MAGIC) ||
- !(ch->ch_tun.un_flags & UN_ISOPEN) || !(tp->termios.c_cflag & CREAD) ||
- (ch->ch_tun.un_flags & UN_CLOSING)) {
-
- DPR_READ(("input. dropping %d bytes on port %d...\n", data_len, ch->ch_portnum));
- DPR_READ(("input. tp: %p tp->magic: %x MAGIC:%x ch flags: %x\n",
- tp, tp ? tp->magic : 0, TTY_MAGIC, ch->ch_tun.un_flags));
- writew(head, &(bs->rx_tail));
- writeb(1, &(bs->idata));
- DGAP_UNLOCK(ch->ch_lock, lock_flags2);
- DGAP_UNLOCK(bd->bd_lock, lock_flags);
- return;
- }
-
- /*
- * If we are throttled, simply don't read any data.
- */
- if (ch->ch_flags & CH_RXBLOCK) {
- writeb(1, &(bs->idata));
- DGAP_UNLOCK(ch->ch_lock, lock_flags2);
- DGAP_UNLOCK(bd->bd_lock, lock_flags);
- DPR_READ(("Port %d throttled, not reading any data. head: %x tail: %x\n",
- ch->ch_portnum, head, tail));
- return;
- }
-
- /*
- * Ignore oruns.
- */
- tmpchar = readb(&(bs->orun));
- if (tmpchar) {
- ch->ch_err_overrun++;
- writeb(0, &(bs->orun));
- }
-
- DPR_READ(("dgap_input start 2\n"));
-
- /* Decide how much data we can send into the tty layer */
- flip_len = TTY_FLIPBUF_SIZE;
-
- /* Chop down the length, if needed */
- len = min(data_len, flip_len);
- len = min(len, (N_TTY_BUF_SIZE - 1));
-
- ld = tty_ldisc_ref(tp);
-
-#ifdef TTY_DONT_FLIP
- /*
- * If the DONT_FLIP flag is on, don't flush our buffer, and act
- * like the ld doesn't have any space to put the data right now.
- */
- if (test_bit(TTY_DONT_FLIP, &tp->flags))
- len = 0;
-#endif
-
- /*
- * If we were unable to get a reference to the ld,
- * don't flush our buffer, and act like the ld doesn't
- * have any space to put the data right now.
- */
- if (!ld) {
- len = 0;
- } else {
- /*
- * If ld doesn't have a pointer to a receive_buf function,
- * flush the data, then act like the ld doesn't have any
- * space to put the data right now.
- */
- if (!ld->ops->receive_buf) {
- writew(head, &(bs->rx_tail));
- len = 0;
- }
- }
-
- if (len <= 0) {
- writeb(1, &(bs->idata));
- DGAP_UNLOCK(ch->ch_lock, lock_flags2);
- DGAP_UNLOCK(bd->bd_lock, lock_flags);
- DPR_READ(("dgap_input 1 - finish\n"));
- if (ld)
- tty_ldisc_deref(ld);
- return;
- }
-
- buf = ch->ch_bd->flipbuf;
- n = len;
-
- /*
- * n now contains the most amount of data we can copy,
- * bounded either by our buffer size or the amount
- * of data the card actually has pending...
- */
- while (n) {
-
- s = ((head >= tail) ? head : ch->ch_rsize) - tail;
- s = min(s, n);
-
- if (s <= 0)
- break;
-
- memcpy_fromio(buf, (char *) ch->ch_raddr + tail, s);
- dgap_sniff_nowait_nolock(ch, "USER READ", buf, s);
-
- tail += s;
- buf += s;
-
- n -= s;
- /* Flip queue if needed */
- tail &= rmask;
- }
-
- writew(tail, &(bs->rx_tail));
- writeb(1, &(bs->idata));
- ch->ch_rxcount += len;
-
- /*
- * If we are completely raw, we don't need to go through a lot
- * of the tty layers that exist.
- * In this case, we take the shortest and fastest route we
- * can to relay the data to the user.
- *
- * On the other hand, if we are not raw, we need to go through
- * the tty layer, which has its API more well defined.
- */
- if (I_PARMRK(tp) || I_BRKINT(tp) || I_INPCK(tp)) {
- dgap_parity_scan(ch, ch->ch_bd->flipbuf, ch->ch_bd->flipflagbuf, &len);
-
- len = tty_buffer_request_room(tp->port, len);
- tty_insert_flip_string_flags(tp->port, ch->ch_bd->flipbuf,
- ch->ch_bd->flipflagbuf, len);
- }
- else {
- len = tty_buffer_request_room(tp->port, len);
- tty_insert_flip_string(tp->port, ch->ch_bd->flipbuf, len);
- }
-
- DGAP_UNLOCK(ch->ch_lock, lock_flags2);
- DGAP_UNLOCK(bd->bd_lock, lock_flags);
-
- /* Tell the tty layer its okay to "eat" the data now */
- tty_flip_buffer_push(tp->port);
-
- if (ld)
- tty_ldisc_deref(ld);
-
- DPR_READ(("dgap_input - finish\n"));
-}
-
-
-/************************************************************************
- * Determines when CARRIER changes state and takes appropriate
- * action.
- ************************************************************************/
-void dgap_carrier(struct channel_t *ch)
-{
- struct board_t *bd;
-
- int virt_carrier = 0;
- int phys_carrier = 0;
-
- DPR_CARR(("dgap_carrier called...\n"));
-
- if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
- return;
-
- bd = ch->ch_bd;
-
- if (!bd || bd->magic != DGAP_BOARD_MAGIC)
- return;
-
- /* Make sure altpin is always set correctly */
- if (ch->ch_digi.digi_flags & DIGI_ALTPIN) {
- ch->ch_dsr = DM_CD;
- ch->ch_cd = DM_DSR;
- }
- else {
- ch->ch_dsr = DM_DSR;
- ch->ch_cd = DM_CD;
- }
-
- if (ch->ch_mistat & D_CD(ch)) {
- DPR_CARR(("mistat: %x D_CD: %x\n", ch->ch_mistat, D_CD(ch)));
- phys_carrier = 1;
- }
-
- if (ch->ch_digi.digi_flags & DIGI_FORCEDCD) {
- virt_carrier = 1;
- }
-
- if (ch->ch_c_cflag & CLOCAL) {
- virt_carrier = 1;
- }
-
-
- DPR_CARR(("DCD: physical: %d virt: %d\n", phys_carrier, virt_carrier));
-
- /*
- * Test for a VIRTUAL carrier transition to HIGH.
- */
- if (((ch->ch_flags & CH_FCAR) == 0) && (virt_carrier == 1)) {
-
- /*
- * When carrier rises, wake any threads waiting
- * for carrier in the open routine.
- */
-
- DPR_CARR(("carrier: virt DCD rose\n"));
-
- if (waitqueue_active(&(ch->ch_flags_wait)))
- wake_up_interruptible(&ch->ch_flags_wait);
- }
-
- /*
- * Test for a PHYSICAL carrier transition to HIGH.
- */
- if (((ch->ch_flags & CH_CD) == 0) && (phys_carrier == 1)) {
-
- /*
- * When carrier rises, wake any threads waiting
- * for carrier in the open routine.
- */
-
- DPR_CARR(("carrier: physical DCD rose\n"));
-
- if (waitqueue_active(&(ch->ch_flags_wait)))
- wake_up_interruptible(&ch->ch_flags_wait);
- }
-
- /*
- * Test for a PHYSICAL transition to low, so long as we aren't
- * currently ignoring physical transitions (which is what "virtual
- * carrier" indicates).
- *
- * The transition of the virtual carrier to low really doesn't
- * matter... it really only means "ignore carrier state", not
- * "make pretend that carrier is there".
- */
- if ((virt_carrier == 0) && ((ch->ch_flags & CH_CD) != 0) &&
- (phys_carrier == 0))
- {
-
- /*
- * When carrier drops:
- *
- * Drop carrier on all open units.
- *
- * Flush queues, waking up any task waiting in the
- * line discipline.
- *
- * Send a hangup to the control terminal.
- *
- * Enable all select calls.
- */
- if (waitqueue_active(&(ch->ch_flags_wait)))
- wake_up_interruptible(&ch->ch_flags_wait);
-
- if (ch->ch_tun.un_open_count > 0) {
- DPR_CARR(("Sending tty hangup\n"));
- tty_hangup(ch->ch_tun.un_tty);
- }
-
- if (ch->ch_pun.un_open_count > 0) {
- DPR_CARR(("Sending pr hangup\n"));
- tty_hangup(ch->ch_pun.un_tty);
- }
- }
-
- /*
- * Make sure that our cached values reflect the current reality.
- */
- if (virt_carrier == 1)
- ch->ch_flags |= CH_FCAR;
- else
- ch->ch_flags &= ~CH_FCAR;
-
- if (phys_carrier == 1)
- ch->ch_flags |= CH_CD;
- else
- ch->ch_flags &= ~CH_CD;
-}
-
-
-/************************************************************************
- *
- * TTY Entry points and helper functions
- *
- ************************************************************************/
-
-/*
- * dgap_tty_open()
- *
- */
-static int dgap_tty_open(struct tty_struct *tty, struct file *file)
-{
- struct board_t *brd;
- struct channel_t *ch;
- struct un_t *un;
- struct bs_t *bs;
- uint major = 0;
- uint minor = 0;
- int rc = 0;
- ulong lock_flags;
- ulong lock_flags2;
- u16 head;
-
- rc = 0;
-
- major = MAJOR(tty_devnum(tty));
- minor = MINOR(tty_devnum(tty));
-
- if (major > 255) {
- return -ENXIO;
- }
-
- /* Get board pointer from our array of majors we have allocated */
- brd = dgap_BoardsByMajor[major];
- if (!brd) {
- return -ENXIO;
- }
-
- /*
- * If board is not yet up to a state of READY, go to
- * sleep waiting for it to happen or they cancel the open.
- */
- rc = wait_event_interruptible(brd->state_wait,
- (brd->state & BOARD_READY));
-
- if (rc) {
- return rc;
- }
-
- DGAP_LOCK(brd->bd_lock, lock_flags);
-
- /* The wait above should guarantee this cannot happen */
- if (brd->state != BOARD_READY) {
- DGAP_UNLOCK(brd->bd_lock, lock_flags);
- return -ENXIO;
- }
-
- /* If opened device is greater than our number of ports, bail. */
- if (MINOR(tty_devnum(tty)) > brd->nasync) {
- DGAP_UNLOCK(brd->bd_lock, lock_flags);
- return -ENXIO;
- }
-
- ch = brd->channels[minor];
- if (!ch) {
- DGAP_UNLOCK(brd->bd_lock, lock_flags);
- return -ENXIO;
- }
-
- /* Grab channel lock */
- DGAP_LOCK(ch->ch_lock, lock_flags2);
-
- /* Figure out our type */
- if (major == brd->dgap_Serial_Major) {
- un = &brd->channels[minor]->ch_tun;
- un->un_type = DGAP_SERIAL;
- }
- else if (major == brd->dgap_TransparentPrint_Major) {
- un = &brd->channels[minor]->ch_pun;
- un->un_type = DGAP_PRINT;
- }
- else {
- DGAP_UNLOCK(ch->ch_lock, lock_flags2);
- DGAP_UNLOCK(brd->bd_lock, lock_flags);
- DPR_OPEN(("%d Unknown TYPE!\n", __LINE__));
- return -ENXIO;
- }
-
- /* Store our unit into driver_data, so we always have it available. */
- tty->driver_data = un;
-
- DPR_OPEN(("Open called. MAJOR: %d MINOR:%d unit: %p NAME: %s\n",
- MAJOR(tty_devnum(tty)), MINOR(tty_devnum(tty)), un, brd->name));
-
- /*
- * Error if channel info pointer is NULL.
- */
- bs = ch->ch_bs;
- if (!bs) {
- DGAP_UNLOCK(ch->ch_lock, lock_flags2);
- DGAP_UNLOCK(brd->bd_lock, lock_flags);
- DPR_OPEN(("%d BS is 0!\n", __LINE__));
- return -ENXIO;
- }
-
- DPR_OPEN(("%d: tflag=%x pflag=%x\n", __LINE__, ch->ch_tun.un_flags, ch->ch_pun.un_flags));
-
- /*
- * Initialize tty's
- */
- if (!(un->un_flags & UN_ISOPEN)) {
- /* Store important variables. */
- un->un_tty = tty;
-
- /* Maybe do something here to the TTY struct as well? */
- }
-
- /*
- * Initialize if neither terminal or printer is open.
- */
- if (!((ch->ch_tun.un_flags | ch->ch_pun.un_flags) & UN_ISOPEN)) {
-
- DPR_OPEN(("dgap_open: initializing channel in open...\n"));
-
- ch->ch_mforce = 0;
- ch->ch_mval = 0;
-
- /*
- * Flush input queue.
- */
- head = readw(&(bs->rx_head));
- writew(head, &(bs->rx_tail));
-
- ch->ch_flags = 0;
- ch->pscan_state = 0;
- ch->pscan_savechar = 0;
-
- ch->ch_c_cflag = tty->termios.c_cflag;
- ch->ch_c_iflag = tty->termios.c_iflag;
- ch->ch_c_oflag = tty->termios.c_oflag;
- ch->ch_c_lflag = tty->termios.c_lflag;
- ch->ch_startc = tty->termios.c_cc[VSTART];
- ch->ch_stopc = tty->termios.c_cc[VSTOP];
-
- /* TODO: flush our TTY struct here? */
- }
-
- dgap_carrier(ch);
- /*
- * Run param in case we changed anything
- */
- dgap_param(tty);
-
- /*
- * follow protocol for opening port
- */
-
- DGAP_UNLOCK(ch->ch_lock, lock_flags2);
- DGAP_UNLOCK(brd->bd_lock, lock_flags);
-
- rc = dgap_block_til_ready(tty, file, ch);
-
- if (!un->un_tty) {
- return -ENODEV;
- }
-
- if (rc) {
- DPR_OPEN(("dgap_tty_open returning after dgap_block_til_ready "
- "with %d\n", rc));
- }
-
- /* No going back now, increment our unit and channel counters */
- DGAP_LOCK(ch->ch_lock, lock_flags);
- ch->ch_open_count++;
- un->un_open_count++;
- un->un_flags |= (UN_ISOPEN);
- DGAP_UNLOCK(ch->ch_lock, lock_flags);
-
- DPR_OPEN(("dgap_tty_open finished\n"));
- return (rc);
-}
-
-
-/*
- * dgap_block_til_ready()
- *
- * Wait for DCD, if needed.
- */
-static int dgap_block_til_ready(struct tty_struct *tty, struct file *file, struct channel_t *ch)
-{
- int retval = 0;
- struct un_t *un = NULL;
- ulong lock_flags;
- uint old_flags = 0;
- int sleep_on_un_flags = 0;
-
- if (!tty || tty->magic != TTY_MAGIC || !file || !ch || ch->magic != DGAP_CHANNEL_MAGIC) {
- return (-ENXIO);
- }
-
- un = tty->driver_data;
- if (!un || un->magic != DGAP_UNIT_MAGIC) {
- return (-ENXIO);
- }
-
- DPR_OPEN(("dgap_block_til_ready - before block.\n"));
-
- DGAP_LOCK(ch->ch_lock, lock_flags);
-
- ch->ch_wopen++;
-
- /* Loop forever */
- while (1) {
-
- sleep_on_un_flags = 0;
-
- /*
- * If board has failed somehow during our sleep, bail with error.
- */
- if (ch->ch_bd->state == BOARD_FAILED) {
- retval = -ENXIO;
- break;
- }
-
- /* If tty was hung up, break out of loop and set error. */
- if (tty_hung_up_p(file)) {
- retval = -EAGAIN;
- break;
- }
-
- /*
- * If either unit is in the middle of the fragile part of close,
- * we just cannot touch the channel safely.
- * Go back to sleep, knowing that when the channel can be
- * touched safely, the close routine will signal the
- * ch_wait_flags to wake us back up.
- */
- if (!((ch->ch_tun.un_flags | ch->ch_pun.un_flags) & UN_CLOSING)) {
-
- /*
- * Our conditions to leave cleanly and happily:
- * 1) NONBLOCKING on the tty is set.
- * 2) CLOCAL is set.
- * 3) DCD (fake or real) is active.
- */
-
- if (file->f_flags & O_NONBLOCK) {
- break;
- }
-
- if (tty->flags & (1 << TTY_IO_ERROR)) {
- break;
- }
-
- if (ch->ch_flags & CH_CD) {
- DPR_OPEN(("%d: ch_flags: %x\n", __LINE__, ch->ch_flags));
- break;
- }
-
- if (ch->ch_flags & CH_FCAR) {
- DPR_OPEN(("%d: ch_flags: %x\n", __LINE__, ch->ch_flags));
- break;
- }
- }
- else {
- sleep_on_un_flags = 1;
- }
-
- /*
- * If there is a signal pending, the user probably
- * interrupted (ctrl-c) us.
- * Leave loop with error set.
- */
- if (signal_pending(current)) {
- DPR_OPEN(("%d: signal pending...\n", __LINE__));
- retval = -ERESTARTSYS;
- break;
- }
-
- DPR_OPEN(("dgap_block_til_ready - blocking.\n"));
-
- /*
- * Store the flags before we let go of channel lock
- */
- if (sleep_on_un_flags)
- old_flags = ch->ch_tun.un_flags | ch->ch_pun.un_flags;
- else
- old_flags = ch->ch_flags;
-
- /*
- * Let go of channel lock before calling schedule.
- * Our poller will get any FEP events and wake us up when DCD
- * eventually goes active.
- */
-
- DGAP_UNLOCK(ch->ch_lock, lock_flags);
-
- DPR_OPEN(("Going to sleep on %s flags...\n",
- (sleep_on_un_flags ? "un" : "ch")));
-
- /*
- * Wait for something in the flags to change from the current value.
- */
- if (sleep_on_un_flags) {
- retval = wait_event_interruptible(un->un_flags_wait,
- (old_flags != (ch->ch_tun.un_flags | ch->ch_pun.un_flags)));
- }
- else {
- retval = wait_event_interruptible(ch->ch_flags_wait,
- (old_flags != ch->ch_flags));
- }
-
- DPR_OPEN(("After sleep... retval: %x\n", retval));
-
- /*
- * We got woken up for some reason.
- * Before looping around, grab our channel lock.
- */
- DGAP_LOCK(ch->ch_lock, lock_flags);
- }
-
- ch->ch_wopen--;
-
- DGAP_UNLOCK(ch->ch_lock, lock_flags);
-
- DPR_OPEN(("dgap_block_til_ready - after blocking.\n"));
-
- if (retval) {
- DPR_OPEN(("dgap_block_til_ready - done. error. retval: %x\n", retval));
- return(retval);
- }
-
- DPR_OPEN(("dgap_block_til_ready - done no error. jiffies: %lu\n", jiffies));
-
- return(0);
-}
-
-
-/*
- * dgap_tty_hangup()
- *
- * Hangup the port. Like a close, but don't wait for output to drain.
- */
-static void dgap_tty_hangup(struct tty_struct *tty)
-{
- struct board_t *bd;
- struct channel_t *ch;
- struct un_t *un;
-
- if (!tty || tty->magic != TTY_MAGIC)
- return;
-
- un = tty->driver_data;
- if (!un || un->magic != DGAP_UNIT_MAGIC)
- return;
-
- ch = un->un_ch;
- if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
- return;
-
- bd = ch->ch_bd;
- if (!bd || bd->magic != DGAP_BOARD_MAGIC)
- return;
-
- DPR_CLOSE(("dgap_hangup called. ch->ch_open_count: %d un->un_open_count: %d\n",
- ch->ch_open_count, un->un_open_count));
-
- /* flush the transmit queues */
- dgap_tty_flush_buffer(tty);
-
- DPR_CLOSE(("dgap_hangup finished. ch->ch_open_count: %d un->un_open_count: %d\n",
- ch->ch_open_count, un->un_open_count));
-}
-
-
-
-/*
- * dgap_tty_close()
- *
- */
-static void dgap_tty_close(struct tty_struct *tty, struct file *file)
-{
- struct ktermios *ts;
- struct board_t *bd;
- struct channel_t *ch;
- struct un_t *un;
- ulong lock_flags;
- int rc = 0;
-
- if (!tty || tty->magic != TTY_MAGIC)
- return;
-
- un = tty->driver_data;
- if (!un || un->magic != DGAP_UNIT_MAGIC)
- return;
-
- ch = un->un_ch;
- if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
- return;
-
- bd = ch->ch_bd;
- if (!bd || bd->magic != DGAP_BOARD_MAGIC)
- return;
-
- ts = &tty->termios;
-
- DPR_CLOSE(("Close called\n"));
-
- DGAP_LOCK(ch->ch_lock, lock_flags);
-
- /*
- * Determine if this is the last close or not - and if we agree about
- * which type of close it is with the Line Discipline
- */
- if ((tty->count == 1) && (un->un_open_count != 1)) {
- /*
- * Uh, oh. tty->count is 1, which means that the tty
- * structure will be freed. un_open_count should always
- * be one in these conditions. If it's greater than
- * one, we've got real problems, since it means the
- * serial port won't be shutdown.
- */
- APR(("tty->count is 1, un open count is %d\n", un->un_open_count));
- un->un_open_count = 1;
- }
-
- if (--un->un_open_count < 0) {
- APR(("bad serial port open count of %d\n", un->un_open_count));
- un->un_open_count = 0;
- }
-
- ch->ch_open_count--;
-
- if (ch->ch_open_count && un->un_open_count) {
- DPR_CLOSE(("dgap_tty_close: not last close ch: %d un:%d\n",
- ch->ch_open_count, un->un_open_count));
-
- DGAP_UNLOCK(ch->ch_lock, lock_flags);
- return;
- }
-
- /* OK, its the last close on the unit */
- DPR_CLOSE(("dgap_tty_close - last close on unit procedures\n"));
-
- un->un_flags |= UN_CLOSING;
-
- tty->closing = 1;
-
- /*
- * Only officially close channel if count is 0 and
- * DIGI_PRINTER bit is not set.
- */
- if ((ch->ch_open_count == 0) && !(ch->ch_digi.digi_flags & DIGI_PRINTER)) {
-
- ch->ch_flags &= ~(CH_RXBLOCK);
-
- DGAP_UNLOCK(ch->ch_lock, lock_flags);
-
- /* wait for output to drain */
- /* This will also return if we take an interrupt */
-
- DPR_CLOSE(("Calling wait_for_drain\n"));
- rc = dgap_wait_for_drain(tty);
- DPR_CLOSE(("After calling wait_for_drain\n"));
-
- if (rc) {
- DPR_BASIC(("dgap_tty_close - bad return: %d ", rc));
- }
-
- dgap_tty_flush_buffer(tty);
- tty_ldisc_flush(tty);
-
- DGAP_LOCK(ch->ch_lock, lock_flags);
-
- tty->closing = 0;
-
- /*
- * If we have HUPCL set, lower DTR and RTS
- */
- if (ch->ch_c_cflag & HUPCL ) {
- DPR_CLOSE(("Close. HUPCL set, dropping DTR/RTS\n"));
- ch->ch_mostat &= ~(D_RTS(ch)|D_DTR(ch));
- dgap_cmdb( ch, SMODEM, 0, D_DTR(ch)|D_RTS(ch), 0 );
-
- /*
- * Go to sleep to ensure RTS/DTR
- * have been dropped for modems to see it.
- */
- if (ch->ch_close_delay) {
- DPR_CLOSE(("Close. Sleeping for RTS/DTR drop\n"));
-
- DGAP_UNLOCK(ch->ch_lock, lock_flags);
- dgap_ms_sleep(ch->ch_close_delay);
- DGAP_LOCK(ch->ch_lock, lock_flags);
-
- DPR_CLOSE(("Close. After sleeping for RTS/DTR drop\n"));
- }
- }
-
- ch->pscan_state = 0;
- ch->pscan_savechar = 0;
- ch->ch_baud_info = 0;
-
- }
-
- /*
- * turn off print device when closing print device.
- */
- if ((un->un_type == DGAP_PRINT) && (ch->ch_flags & CH_PRON) ) {
- dgap_wmove(ch, ch->ch_digi.digi_offstr,
- (int) ch->ch_digi.digi_offlen);
- ch->ch_flags &= ~CH_PRON;
- }
-
- un->un_tty = NULL;
- un->un_flags &= ~(UN_ISOPEN | UN_CLOSING);
- tty->driver_data = NULL;
-
- DPR_CLOSE(("Close. Doing wakeups\n"));
- wake_up_interruptible(&ch->ch_flags_wait);
- wake_up_interruptible(&un->un_flags_wait);
-
- DGAP_UNLOCK(ch->ch_lock, lock_flags);
-
- DPR_BASIC(("dgap_tty_close - complete\n"));
-}
-
-
-/*
- * dgap_tty_chars_in_buffer()
- *
- * Return number of characters that have not been transmitted yet.
- *
- * This routine is used by the line discipline to determine if there
- * is data waiting to be transmitted/drained/flushed or not.
- */
-static int dgap_tty_chars_in_buffer(struct tty_struct *tty)
-{
- struct board_t *bd = NULL;
- struct channel_t *ch = NULL;
- struct un_t *un = NULL;
- struct bs_t *bs = NULL;
- uchar tbusy;
- uint chars = 0;
- u16 thead, ttail, tmask, chead, ctail;
- ulong lock_flags = 0;
- ulong lock_flags2 = 0;
-
- if (tty == NULL)
- return(0);
-
- un = tty->driver_data;
- if (!un || un->magic != DGAP_UNIT_MAGIC)
- return (0);
-
- ch = un->un_ch;
- if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
- return (0);
-
- bd = ch->ch_bd;
- if (!bd || bd->magic != DGAP_BOARD_MAGIC)
- return (0);
-
- bs = ch->ch_bs;
- if (!bs)
- return (0);
-
- DGAP_LOCK(bd->bd_lock, lock_flags);
- DGAP_LOCK(ch->ch_lock, lock_flags2);
-
- tmask = (ch->ch_tsize - 1);
-
- /* Get Transmit queue pointers */
- thead = readw(&(bs->tx_head)) & tmask;
- ttail = readw(&(bs->tx_tail)) & tmask;
-
- /* Get tbusy flag */
- tbusy = readb(&(bs->tbusy));
-
- /* Get Command queue pointers */
- chead = readw(&(ch->ch_cm->cm_head));
- ctail = readw(&(ch->ch_cm->cm_tail));
-
- DGAP_UNLOCK(ch->ch_lock, lock_flags2);
- DGAP_UNLOCK(bd->bd_lock, lock_flags);
-
- /*
- * The only way we know for sure if there is no pending
- * data left to be transferred, is if:
- * 1) Transmit head and tail are equal (empty).
- * 2) Command queue head and tail are equal (empty).
- * 3) The "TBUSY" flag is 0. (Transmitter not busy).
- */
-
- if ((ttail == thead) && (tbusy == 0) && (chead == ctail)) {
- chars = 0;
- }
- else {
- if (thead >= ttail)
- chars = thead - ttail;
- else
- chars = thead - ttail + ch->ch_tsize;
- /*
- * Fudge factor here.
- * If chars is zero, we know that the command queue had
- * something in it or tbusy was set. Because we cannot
- * be sure if there is still some data to be transmitted,
- * lets lie, and tell ld we have 1 byte left.
- */
- if (chars == 0) {
- /*
- * If TBUSY is still set, and our tx buffers are empty,
- * force the firmware to send me another wakeup after
- * TBUSY has been cleared.
- */
- if (tbusy != 0) {
- DGAP_LOCK(ch->ch_lock, lock_flags);
- un->un_flags |= UN_EMPTY;
- writeb(1, &(bs->iempty));
- DGAP_UNLOCK(ch->ch_lock, lock_flags);
- }
- chars = 1;
- }
- }
-
- DPR_WRITE(("dgap_tty_chars_in_buffer. Port: %x - %d (head: %d tail: %d tsize: %d)\n",
- ch->ch_portnum, chars, thead, ttail, ch->ch_tsize));
- return(chars);
-}
-
-
-static int dgap_wait_for_drain(struct tty_struct *tty)
-{
- struct channel_t *ch;
- struct un_t *un;
- struct bs_t *bs;
- int ret = -EIO;
- uint count = 1;
- ulong lock_flags = 0;
-
- if (!tty || tty->magic != TTY_MAGIC)
- return ret;
-
- un = tty->driver_data;
- if (!un || un->magic != DGAP_UNIT_MAGIC)
- return ret;
-
- ch = un->un_ch;
- if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
- return ret;
-
- bs = ch->ch_bs;
- if (!bs)
- return ret;
-
- ret = 0;
-
- DPR_DRAIN(("dgap_wait_for_drain start\n"));
-
- /* Loop until data is drained */
- while (count != 0) {
-
- count = dgap_tty_chars_in_buffer(tty);
-
- if (count == 0)
- break;
-
- /* Set flag waiting for drain */
- DGAP_LOCK(ch->ch_lock, lock_flags);
- un->un_flags |= UN_EMPTY;
- writeb(1, &(bs->iempty));
- DGAP_UNLOCK(ch->ch_lock, lock_flags);
-
- /* Go to sleep till we get woken up */
- ret = wait_event_interruptible(un->un_flags_wait, ((un->un_flags & UN_EMPTY) == 0));
- /* If ret is non-zero, user ctrl-c'ed us */
- if (ret) {
- break;
- }
- }
-
- DGAP_LOCK(ch->ch_lock, lock_flags);
- un->un_flags &= ~(UN_EMPTY);
- DGAP_UNLOCK(ch->ch_lock, lock_flags);
-
- DPR_DRAIN(("dgap_wait_for_drain finish\n"));
- return (ret);
-}
-
-
-/*
- * dgap_maxcps_room
- *
- * Reduces bytes_available to the max number of characters
- * that can be sent currently given the maxcps value, and
- * returns the new bytes_available. This only affects printer
- * output.
- */
-static int dgap_maxcps_room(struct tty_struct *tty, int bytes_available)
-{
- struct channel_t *ch = NULL;
- struct un_t *un = NULL;
-
- if (tty == NULL)
- return (bytes_available);
-
- un = tty->driver_data;
- if (!un || un->magic != DGAP_UNIT_MAGIC)
- return (bytes_available);
-
- ch = un->un_ch;
- if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
- return (bytes_available);
-
- /*
- * If its not the Transparent print device, return
- * the full data amount.
- */
- if (un->un_type != DGAP_PRINT)
- return (bytes_available);
-
- if (ch->ch_digi.digi_maxcps > 0 && ch->ch_digi.digi_bufsize > 0 ) {
- int cps_limit = 0;
- unsigned long current_time = jiffies;
- unsigned long buffer_time = current_time +
- (HZ * ch->ch_digi.digi_bufsize) / ch->ch_digi.digi_maxcps;
-
- if (ch->ch_cpstime < current_time) {
- /* buffer is empty */
- ch->ch_cpstime = current_time; /* reset ch_cpstime */
- cps_limit = ch->ch_digi.digi_bufsize;
- }
- else if (ch->ch_cpstime < buffer_time) {
- /* still room in the buffer */
- cps_limit = ((buffer_time - ch->ch_cpstime) * ch->ch_digi.digi_maxcps) / HZ;
- }
- else {
- /* no room in the buffer */
- cps_limit = 0;
- }
-
- bytes_available = min(cps_limit, bytes_available);
- }
-
- return (bytes_available);
-}
-
-
-static inline void dgap_set_firmware_event(struct un_t *un, unsigned int event)
-{
- struct channel_t *ch = NULL;
- struct bs_t *bs = NULL;
-
- if (!un || un->magic != DGAP_UNIT_MAGIC)
- return;
- ch = un->un_ch;
- if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
- return;
- bs = ch->ch_bs;
- if (!bs)
- return;
-
- if ((event & UN_LOW) != 0) {
- if ((un->un_flags & UN_LOW) == 0) {
- un->un_flags |= UN_LOW;
- writeb(1, &(bs->ilow));
- }
- }
- if ((event & UN_LOW) != 0) {
- if ((un->un_flags & UN_EMPTY) == 0) {
- un->un_flags |= UN_EMPTY;
- writeb(1, &(bs->iempty));
- }
- }
-}
-
-
-/*
- * dgap_tty_write_room()
- *
- * Return space available in Tx buffer
- */
-static int dgap_tty_write_room(struct tty_struct *tty)
-{
- struct channel_t *ch = NULL;
- struct un_t *un = NULL;
- struct bs_t *bs = NULL;
- u16 head, tail, tmask;
- int ret = 0;
- ulong lock_flags = 0;
-
- if (tty == NULL || dgap_TmpWriteBuf == NULL)
- return(0);
-
- un = tty->driver_data;
- if (!un || un->magic != DGAP_UNIT_MAGIC)
- return (0);
-
- ch = un->un_ch;
- if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
- return (0);
-
- bs = ch->ch_bs;
- if (!bs)
- return (0);
-
- DGAP_LOCK(ch->ch_lock, lock_flags);
-
- tmask = ch->ch_tsize - 1;
- head = readw(&(bs->tx_head)) & tmask;
- tail = readw(&(bs->tx_tail)) & tmask;
-
- if ((ret = tail - head - 1) < 0)
- ret += ch->ch_tsize;
-
- /* Limit printer to maxcps */
- ret = dgap_maxcps_room(tty, ret);
-
- /*
- * If we are printer device, leave space for
- * possibly both the on and off strings.
- */
- if (un->un_type == DGAP_PRINT) {
- if (!(ch->ch_flags & CH_PRON))
- ret -= ch->ch_digi.digi_onlen;
- ret -= ch->ch_digi.digi_offlen;
- }
- else {
- if (ch->ch_flags & CH_PRON)
- ret -= ch->ch_digi.digi_offlen;
- }
-
- if (ret < 0)
- ret = 0;
-
- /*
- * Schedule FEP to wake us up if needed.
- *
- * TODO: This might be overkill...
- * Do we really need to schedule callbacks from the FEP
- * in every case? Can we get smarter based on ret?
- */
- dgap_set_firmware_event(un, UN_LOW | UN_EMPTY);
- DGAP_UNLOCK(ch->ch_lock, lock_flags);
-
- DPR_WRITE(("dgap_tty_write_room - %d tail: %d head: %d\n", ret, tail, head));
-
- return(ret);
-}
-
-
-/*
- * dgap_tty_put_char()
- *
- * Put a character into ch->ch_buf
- *
- * - used by the line discipline for OPOST processing
- */
-static int dgap_tty_put_char(struct tty_struct *tty, unsigned char c)
-{
- /*
- * Simply call tty_write.
- */
- DPR_WRITE(("dgap_tty_put_char called\n"));
- dgap_tty_write(tty, &c, 1);
- return 1;
-}
-
-
-/*
- * dgap_tty_write()
- *
- * Take data from the user or kernel and send it out to the FEP.
- * In here exists all the Transparent Print magic as well.
- */
-static int dgap_tty_write(struct tty_struct *tty, const unsigned char *buf, int count)
-{
- struct channel_t *ch = NULL;
- struct un_t *un = NULL;
- struct bs_t *bs = NULL;
- char *vaddr = NULL;
- u16 head, tail, tmask, remain;
- int bufcount = 0, n = 0;
- int orig_count = 0;
- ulong lock_flags;
- int from_user = 0;
-
- if (tty == NULL || dgap_TmpWriteBuf == NULL)
- return(0);
-
- un = tty->driver_data;
- if (!un || un->magic != DGAP_UNIT_MAGIC)
- return (0);
-
- ch = un->un_ch;
- if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
- return(0);
-
- bs = ch->ch_bs;
- if (!bs)
- return(0);
-
- if (!count)
- return(0);
-
- DPR_WRITE(("dgap_tty_write: Port: %x tty=%p user=%d len=%d\n",
- ch->ch_portnum, tty, from_user, count));
-
- /*
- * Store original amount of characters passed in.
- * This helps to figure out if we should ask the FEP
- * to send us an event when it has more space available.
- */
- orig_count = count;
-
- DGAP_LOCK(ch->ch_lock, lock_flags);
-
- /* Get our space available for the channel from the board */
- tmask = ch->ch_tsize - 1;
- head = readw(&(bs->tx_head)) & tmask;
- tail = readw(&(bs->tx_tail)) & tmask;
-
- if ((bufcount = tail - head - 1) < 0)
- bufcount += ch->ch_tsize;
-
- DPR_WRITE(("%d: bufcount: %x count: %x tail: %x head: %x tmask: %x\n",
- __LINE__, bufcount, count, tail, head, tmask));
-
- /*
- * Limit printer output to maxcps overall, with bursts allowed
- * up to bufsize characters.
- */
- bufcount = dgap_maxcps_room(tty, bufcount);
-
- /*
- * Take minimum of what the user wants to send, and the
- * space available in the FEP buffer.
- */
- count = min(count, bufcount);
-
- /*
- * Bail if no space left.
- */
- if (count <= 0) {
- dgap_set_firmware_event(un, UN_LOW | UN_EMPTY);
- DGAP_UNLOCK(ch->ch_lock, lock_flags);
- return(0);
- }
-
- /*
- * Output the printer ON string, if we are in terminal mode, but
- * need to be in printer mode.
- */
- if ((un->un_type == DGAP_PRINT) && !(ch->ch_flags & CH_PRON)) {
- dgap_wmove(ch, ch->ch_digi.digi_onstr,
- (int) ch->ch_digi.digi_onlen);
- head = readw(&(bs->tx_head)) & tmask;
- ch->ch_flags |= CH_PRON;
- }
-
- /*
- * On the other hand, output the printer OFF string, if we are
- * currently in printer mode, but need to output to the terminal.
- */
- if ((un->un_type != DGAP_PRINT) && (ch->ch_flags & CH_PRON)) {
- dgap_wmove(ch, ch->ch_digi.digi_offstr,
- (int) ch->ch_digi.digi_offlen);
- head = readw(&(bs->tx_head)) & tmask;
- ch->ch_flags &= ~CH_PRON;
- }
-
- /*
- * If there is nothing left to copy, or I can't handle any more data, leave.
- */
- if (count <= 0) {
- dgap_set_firmware_event(un, UN_LOW | UN_EMPTY);
- DGAP_UNLOCK(ch->ch_lock, lock_flags);
- return(0);
- }
-
- if (from_user) {
-
- count = min(count, WRITEBUFLEN);
-
- DGAP_UNLOCK(ch->ch_lock, lock_flags);
-
- /*
- * If data is coming from user space, copy it into a temporary
- * buffer so we don't get swapped out while doing the copy to
- * the board.
- */
- /* we're allowed to block if it's from_user */
- if (down_interruptible(&dgap_TmpWriteSem)) {
- return (-EINTR);
- }
-
- if (copy_from_user(dgap_TmpWriteBuf, (const uchar __user *) buf, count)) {
- up(&dgap_TmpWriteSem);
- printk("Write: Copy from user failed!\n");
- return -EFAULT;
- }
-
- DGAP_LOCK(ch->ch_lock, lock_flags);
-
- buf = dgap_TmpWriteBuf;
- }
-
- n = count;
-
- /*
- * If the write wraps over the top of the circular buffer,
- * move the portion up to the wrap point, and reset the
- * pointers to the bottom.
- */
- remain = ch->ch_tstart + ch->ch_tsize - head;
-
- if (n >= remain) {
- n -= remain;
- vaddr = ch->ch_taddr + head;
-
- memcpy_toio(vaddr, (uchar *) buf, remain);
- dgap_sniff_nowait_nolock(ch, "USER WRITE", (uchar *) buf, remain);
-
- head = ch->ch_tstart;
- buf += remain;
- }
-
- if (n > 0) {
-
- /*
- * Move rest of data.
- */
- vaddr = ch->ch_taddr + head;
- remain = n;
-
- memcpy_toio(vaddr, (uchar *) buf, remain);
- dgap_sniff_nowait_nolock(ch, "USER WRITE", (uchar *) buf, remain);
-
- head += remain;
-
- }
-
- if (count) {
- ch->ch_txcount += count;
- head &= tmask;
- writew(head, &(bs->tx_head));
- }
-
-
- dgap_set_firmware_event(un, UN_LOW | UN_EMPTY);
-
- /*
- * If this is the print device, and the
- * printer is still on, we need to turn it
- * off before going idle. If the buffer is
- * non-empty, wait until it goes empty.
- * Otherwise turn it off right now.
- */
- if ((un->un_type == DGAP_PRINT) && (ch->ch_flags & CH_PRON)) {
- tail = readw(&(bs->tx_tail)) & tmask;
-
- if (tail != head) {
- un->un_flags |= UN_EMPTY;
- writeb(1, &(bs->iempty));
- }
- else {
- dgap_wmove(ch, ch->ch_digi.digi_offstr,
- (int) ch->ch_digi.digi_offlen);
- head = readw(&(bs->tx_head)) & tmask;
- ch->ch_flags &= ~CH_PRON;
- }
- }
-
- /* Update printer buffer empty time. */
- if ((un->un_type == DGAP_PRINT) && (ch->ch_digi.digi_maxcps > 0)
- && (ch->ch_digi.digi_bufsize > 0)) {
- ch->ch_cpstime += (HZ * count) / ch->ch_digi.digi_maxcps;
- }
-
- if (from_user) {
- DGAP_UNLOCK(ch->ch_lock, lock_flags);
- up(&dgap_TmpWriteSem);
- }
- else {
- DGAP_UNLOCK(ch->ch_lock, lock_flags);
- }
-
- DPR_WRITE(("Write finished - Write %d bytes of %d.\n", count, orig_count));
-
- return (count);
-}
-
-
-
-/*
- * Return modem signals to ld.
- */
-static int dgap_tty_tiocmget(struct tty_struct *tty)
-{
- struct channel_t *ch;
- struct un_t *un;
- int result = -EIO;
- uchar mstat = 0;
- ulong lock_flags;
-
- if (!tty || tty->magic != TTY_MAGIC)
- return result;
-
- un = tty->driver_data;
- if (!un || un->magic != DGAP_UNIT_MAGIC)
- return result;
-
- ch = un->un_ch;
- if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
- return result;
-
- DPR_IOCTL(("dgap_tty_tiocmget start\n"));
-
- DGAP_LOCK(ch->ch_lock, lock_flags);
-
- mstat = readb(&(ch->ch_bs->m_stat));
- /* Append any outbound signals that might be pending... */
- mstat |= ch->ch_mostat;
-
- DGAP_UNLOCK(ch->ch_lock, lock_flags);
-
- result = 0;
-
- if (mstat & D_DTR(ch))
- result |= TIOCM_DTR;
- if (mstat & D_RTS(ch))
- result |= TIOCM_RTS;
- if (mstat & D_CTS(ch))
- result |= TIOCM_CTS;
- if (mstat & D_DSR(ch))
- result |= TIOCM_DSR;
- if (mstat & D_RI(ch))
- result |= TIOCM_RI;
- if (mstat & D_CD(ch))
- result |= TIOCM_CD;
-
- DPR_IOCTL(("dgap_tty_tiocmget finish\n"));
-
- return result;
-}
-
-
-/*
- * dgap_tty_tiocmset()
- *
- * Set modem signals, called by ld.
- */
-
-static int dgap_tty_tiocmset(struct tty_struct *tty,
- unsigned int set, unsigned int clear)
-{
- struct board_t *bd;
- struct channel_t *ch;
- struct un_t *un;
- int ret = -EIO;
- ulong lock_flags;
- ulong lock_flags2;
-
- if (!tty || tty->magic != TTY_MAGIC)
- return ret;
-
- un = tty->driver_data;
- if (!un || un->magic != DGAP_UNIT_MAGIC)
- return ret;
-
- ch = un->un_ch;
- if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
- return ret;
-
- bd = ch->ch_bd;
- if (!bd || bd->magic != DGAP_BOARD_MAGIC)
- return ret;
-
- DPR_IOCTL(("dgap_tty_tiocmset start\n"));
-
- DGAP_LOCK(bd->bd_lock, lock_flags);
- DGAP_LOCK(ch->ch_lock, lock_flags2);
-
- if (set & TIOCM_RTS) {
- ch->ch_mforce |= D_RTS(ch);
- ch->ch_mval |= D_RTS(ch);
- }
-
- if (set & TIOCM_DTR) {
- ch->ch_mforce |= D_DTR(ch);
- ch->ch_mval |= D_DTR(ch);
- }
-
- if (clear & TIOCM_RTS) {
- ch->ch_mforce |= D_RTS(ch);
- ch->ch_mval &= ~(D_RTS(ch));
- }
-
- if (clear & TIOCM_DTR) {
- ch->ch_mforce |= D_DTR(ch);
- ch->ch_mval &= ~(D_DTR(ch));
- }
-
- dgap_param(tty);
-
- DGAP_UNLOCK(ch->ch_lock, lock_flags2);
- DGAP_UNLOCK(bd->bd_lock, lock_flags);
-
- DPR_IOCTL(("dgap_tty_tiocmset finish\n"));
-
- return (0);
-}
-
-
-
-/*
- * dgap_tty_send_break()
- *
- * Send a Break, called by ld.
- */
-static int dgap_tty_send_break(struct tty_struct *tty, int msec)
-{
- struct board_t *bd;
- struct channel_t *ch;
- struct un_t *un;
- int ret = -EIO;
- ulong lock_flags;
- ulong lock_flags2;
-
- if (!tty || tty->magic != TTY_MAGIC)
- return ret;
-
- un = tty->driver_data;
- if (!un || un->magic != DGAP_UNIT_MAGIC)
- return ret;
-
- ch = un->un_ch;
- if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
- return ret;
-
- bd = ch->ch_bd;
- if (!bd || bd->magic != DGAP_BOARD_MAGIC)
- return ret;
-
- switch (msec) {
- case -1:
- msec = 0xFFFF;
- break;
- case 0:
- msec = 1;
- break;
- default:
- msec /= 10;
- break;
- }
-
- DPR_IOCTL(("dgap_tty_send_break start 1. %lx\n", jiffies));
-
- DGAP_LOCK(bd->bd_lock, lock_flags);
- DGAP_LOCK(ch->ch_lock, lock_flags2);
-#if 0
- dgap_cmdw(ch, SBREAK, (u16) SBREAK_TIME, 0);
-#endif
- dgap_cmdw(ch, SBREAK, (u16) msec, 0);
-
- DGAP_UNLOCK(ch->ch_lock, lock_flags2);
- DGAP_UNLOCK(bd->bd_lock, lock_flags);
-
- DPR_IOCTL(("dgap_tty_send_break finish\n"));
-
- return (0);
-}
-
-
-
-
-/*
- * dgap_tty_wait_until_sent()
- *
- * wait until data has been transmitted, called by ld.
- */
-static void dgap_tty_wait_until_sent(struct tty_struct *tty, int timeout)
-{
- int rc;
- rc = dgap_wait_for_drain(tty);
- if (rc) {
- DPR_IOCTL(("dgap_tty_ioctl - bad return: %d ", rc));
- return;
- }
- return;
-}
-
-
-
-/*
- * dgap_send_xchar()
- *
- * send a high priority character, called by ld.
- */
-static void dgap_tty_send_xchar(struct tty_struct *tty, char c)
-{
- struct board_t *bd;
- struct channel_t *ch;
- struct un_t *un;
- ulong lock_flags;
- ulong lock_flags2;
-
- if (!tty || tty->magic != TTY_MAGIC)
- return;
-
- un = tty->driver_data;
- if (!un || un->magic != DGAP_UNIT_MAGIC)
- return;
-
- ch = un->un_ch;
- if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
- return;
-
- bd = ch->ch_bd;
- if (!bd || bd->magic != DGAP_BOARD_MAGIC)
- return;
-
- DPR_IOCTL(("dgap_tty_send_xchar start 1. %lx\n", jiffies));
-
- DGAP_LOCK(bd->bd_lock, lock_flags);
- DGAP_LOCK(ch->ch_lock, lock_flags2);
-
- /*
- * This is technically what we should do.
- * However, the NIST tests specifically want
- * to see each XON or XOFF character that it
- * sends, so lets just send each character
- * by hand...
- */
-#if 0
- if (c == STOP_CHAR(tty)) {
- dgap_cmdw(ch, RPAUSE, 0, 0);
- }
- else if (c == START_CHAR(tty)) {
- dgap_cmdw(ch, RRESUME, 0, 0);
- }
- else {
- dgap_wmove(ch, &c, 1);
- }
-#else
- dgap_wmove(ch, &c, 1);
-#endif
-
- DGAP_UNLOCK(ch->ch_lock, lock_flags2);
- DGAP_UNLOCK(bd->bd_lock, lock_flags);
-
- DPR_IOCTL(("dgap_tty_send_xchar finish\n"));
-
- return;
-}
-
-
-
-
-/*
- * Return modem signals to ld.
- */
-static int dgap_get_modem_info(struct channel_t *ch, unsigned int __user *value)
-{
- int result = 0;
- uchar mstat = 0;
- ulong lock_flags;
- int rc = 0;
-
- DPR_IOCTL(("dgap_get_modem_info start\n"));
-
- if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
- return(-ENXIO);
-
- DGAP_LOCK(ch->ch_lock, lock_flags);
-
- mstat = readb(&(ch->ch_bs->m_stat));
- /* Append any outbound signals that might be pending... */
- mstat |= ch->ch_mostat;
-
- DGAP_UNLOCK(ch->ch_lock, lock_flags);
-
- result = 0;
-
- if (mstat & D_DTR(ch))
- result |= TIOCM_DTR;
- if (mstat & D_RTS(ch))
- result |= TIOCM_RTS;
- if (mstat & D_CTS(ch))
- result |= TIOCM_CTS;
- if (mstat & D_DSR(ch))
- result |= TIOCM_DSR;
- if (mstat & D_RI(ch))
- result |= TIOCM_RI;
- if (mstat & D_CD(ch))
- result |= TIOCM_CD;
-
- rc = put_user(result, value);
-
- DPR_IOCTL(("dgap_get_modem_info finish\n"));
- return(rc);
-}
-
-
-/*
- * dgap_set_modem_info()
- *
- * Set modem signals, called by ld.
- */
-static int dgap_set_modem_info(struct tty_struct *tty, unsigned int command, unsigned int __user *value)
-{
- struct board_t *bd;
- struct channel_t *ch;
- struct un_t *un;
- int ret = -ENXIO;
- unsigned int arg = 0;
- ulong lock_flags;
- ulong lock_flags2;
-
- if (!tty || tty->magic != TTY_MAGIC)
- return ret;
-
- un = tty->driver_data;
- if (!un || un->magic != DGAP_UNIT_MAGIC)
- return ret;
-
- ch = un->un_ch;
- if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
- return ret;
-
- bd = ch->ch_bd;
- if (!bd || bd->magic != DGAP_BOARD_MAGIC)
- return ret;
-
- DPR_IOCTL(("dgap_set_modem_info() start\n"));
-
- ret = get_user(arg, value);
- if (ret) {
- DPR_IOCTL(("dgap_set_modem_info %d ret: %x. finished.\n", __LINE__, ret));
- return(ret);
- }
-
- DPR_IOCTL(("dgap_set_modem_info: command: %x arg: %x\n", command, arg));
-
- switch (command) {
- case TIOCMBIS:
- if (arg & TIOCM_RTS) {
- ch->ch_mforce |= D_RTS(ch);
- ch->ch_mval |= D_RTS(ch);
- }
-
- if (arg & TIOCM_DTR) {
- ch->ch_mforce |= D_DTR(ch);
- ch->ch_mval |= D_DTR(ch);
- }
-
- break;
-
- case TIOCMBIC:
- if (arg & TIOCM_RTS) {
- ch->ch_mforce |= D_RTS(ch);
- ch->ch_mval &= ~(D_RTS(ch));
- }
-
- if (arg & TIOCM_DTR) {
- ch->ch_mforce |= D_DTR(ch);
- ch->ch_mval &= ~(D_DTR(ch));
- }
-
- break;
-
- case TIOCMSET:
- ch->ch_mforce = D_DTR(ch)|D_RTS(ch);
-
- if (arg & TIOCM_RTS) {
- ch->ch_mval |= D_RTS(ch);
- }
- else {
- ch->ch_mval &= ~(D_RTS(ch));
- }
-
- if (arg & TIOCM_DTR) {
- ch->ch_mval |= (D_DTR(ch));
- }
- else {
- ch->ch_mval &= ~(D_DTR(ch));
- }
-
- break;
-
- default:
- return(-EINVAL);
- }
-
- DGAP_LOCK(bd->bd_lock, lock_flags);
- DGAP_LOCK(ch->ch_lock, lock_flags2);
-
- dgap_param(tty);
-
- DGAP_UNLOCK(ch->ch_lock, lock_flags2);
- DGAP_UNLOCK(bd->bd_lock, lock_flags);
-
- DPR_IOCTL(("dgap_set_modem_info finish\n"));
-
- return (0);
-}
-
-
-/*
- * dgap_tty_digigeta()
- *
- * Ioctl to get the information for ditty.
- *
- *
- *
- */
-static int dgap_tty_digigeta(struct tty_struct *tty, struct digi_t __user *retinfo)
-{
- struct channel_t *ch;
- struct un_t *un;
- struct digi_t tmp;
- ulong lock_flags;
-
- if (!retinfo)
- return (-EFAULT);
-
- if (!tty || tty->magic != TTY_MAGIC)
- return (-EFAULT);
-
- un = tty->driver_data;
- if (!un || un->magic != DGAP_UNIT_MAGIC)
- return (-EFAULT);
-
- ch = un->un_ch;
- if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
- return (-EFAULT);
-
- memset(&tmp, 0, sizeof(tmp));
-
- DGAP_LOCK(ch->ch_lock, lock_flags);
- memcpy(&tmp, &ch->ch_digi, sizeof(tmp));
- DGAP_UNLOCK(ch->ch_lock, lock_flags);
-
- if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
- return (-EFAULT);
-
- return (0);
-}
-
-
-/*
- * dgap_tty_digiseta()
- *
- * Ioctl to set the information for ditty.
- *
- *
- *
- */
-static int dgap_tty_digiseta(struct tty_struct *tty, struct digi_t __user *new_info)
-{
- struct board_t *bd;
- struct channel_t *ch;
- struct un_t *un;
- struct digi_t new_digi;
- ulong lock_flags = 0;
- unsigned long lock_flags2;
-
- DPR_IOCTL(("DIGI_SETA start\n"));
-
- if (!tty || tty->magic != TTY_MAGIC)
- return (-EFAULT);
-
- un = tty->driver_data;
- if (!un || un->magic != DGAP_UNIT_MAGIC)
- return (-EFAULT);
-
- ch = un->un_ch;
- if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
- return (-EFAULT);
-
- bd = ch->ch_bd;
- if (!bd || bd->magic != DGAP_BOARD_MAGIC)
- return (-EFAULT);
-
- if (copy_from_user(&new_digi, new_info, sizeof(struct digi_t))) {
- DPR_IOCTL(("DIGI_SETA failed copy_from_user\n"));
- return(-EFAULT);
- }
-
- DGAP_LOCK(bd->bd_lock, lock_flags);
- DGAP_LOCK(ch->ch_lock, lock_flags2);
-
- memcpy(&ch->ch_digi, &new_digi, sizeof(struct digi_t));
-
- if (ch->ch_digi.digi_maxcps < 1)
- ch->ch_digi.digi_maxcps = 1;
-
- if (ch->ch_digi.digi_maxcps > 10000)
- ch->ch_digi.digi_maxcps = 10000;
-
- if (ch->ch_digi.digi_bufsize < 10)
- ch->ch_digi.digi_bufsize = 10;
-
- if (ch->ch_digi.digi_maxchar < 1)
- ch->ch_digi.digi_maxchar = 1;
-
- if (ch->ch_digi.digi_maxchar > ch->ch_digi.digi_bufsize)
- ch->ch_digi.digi_maxchar = ch->ch_digi.digi_bufsize;
-
- if (ch->ch_digi.digi_onlen > DIGI_PLEN)
- ch->ch_digi.digi_onlen = DIGI_PLEN;
-
- if (ch->ch_digi.digi_offlen > DIGI_PLEN)
- ch->ch_digi.digi_offlen = DIGI_PLEN;
-
- dgap_param(tty);
-
- DGAP_UNLOCK(ch->ch_lock, lock_flags2);
- DGAP_UNLOCK(bd->bd_lock, lock_flags);
-
- DPR_IOCTL(("DIGI_SETA finish\n"));
-
- return(0);
-}
-
-
-/*
- * dgap_tty_digigetedelay()
- *
- * Ioctl to get the current edelay setting.
- *
- *
- *
- */
-static int dgap_tty_digigetedelay(struct tty_struct *tty, int __user *retinfo)
-{
- struct channel_t *ch;
- struct un_t *un;
- int tmp;
- ulong lock_flags;
-
- if (!retinfo)
- return (-EFAULT);
-
- if (!tty || tty->magic != TTY_MAGIC)
- return (-EFAULT);
-
- un = tty->driver_data;
- if (!un || un->magic != DGAP_UNIT_MAGIC)
- return (-EFAULT);
-
- ch = un->un_ch;
- if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
- return (-EFAULT);
-
- memset(&tmp, 0, sizeof(tmp));
-
- DGAP_LOCK(ch->ch_lock, lock_flags);
- tmp = readw(&(ch->ch_bs->edelay));
- DGAP_UNLOCK(ch->ch_lock, lock_flags);
-
- if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
- return (-EFAULT);
-
- return (0);
-}
-
-
-/*
- * dgap_tty_digisetedelay()
- *
- * Ioctl to set the EDELAY setting
- *
- */
-static int dgap_tty_digisetedelay(struct tty_struct *tty, int __user *new_info)
-{
- struct board_t *bd;
- struct channel_t *ch;
- struct un_t *un;
- int new_digi;
- ulong lock_flags;
- ulong lock_flags2;
-
- DPR_IOCTL(("DIGI_SETA start\n"));
-
- if (!tty || tty->magic != TTY_MAGIC)
- return (-EFAULT);
-
- un = tty->driver_data;
- if (!un || un->magic != DGAP_UNIT_MAGIC)
- return (-EFAULT);
-
- ch = un->un_ch;
- if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
- return (-EFAULT);
-
- bd = ch->ch_bd;
- if (!bd || bd->magic != DGAP_BOARD_MAGIC)
- return (-EFAULT);
-
- if (copy_from_user(&new_digi, new_info, sizeof(int))) {
- DPR_IOCTL(("DIGI_SETEDELAY failed copy_from_user\n"));
- return(-EFAULT);
- }
-
- DGAP_LOCK(bd->bd_lock, lock_flags);
- DGAP_LOCK(ch->ch_lock, lock_flags2);
-
- writew((u16) new_digi, &(ch->ch_bs->edelay));
-
- dgap_param(tty);
-
- DGAP_UNLOCK(ch->ch_lock, lock_flags2);
- DGAP_UNLOCK(bd->bd_lock, lock_flags);
-
- DPR_IOCTL(("DIGI_SETA finish\n"));
-
- return(0);
-}
-
-
-/*
- * dgap_tty_digigetcustombaud()
- *
- * Ioctl to get the current custom baud rate setting.
- */
-static int dgap_tty_digigetcustombaud(struct tty_struct *tty, int __user *retinfo)
-{
- struct channel_t *ch;
- struct un_t *un;
- int tmp;
- ulong lock_flags;
-
- if (!retinfo)
- return (-EFAULT);
-
- if (!tty || tty->magic != TTY_MAGIC)
- return (-EFAULT);
-
- un = tty->driver_data;
- if (!un || un->magic != DGAP_UNIT_MAGIC)
- return (-EFAULT);
-
- ch = un->un_ch;
- if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
- return (-EFAULT);
-
- memset(&tmp, 0, sizeof(tmp));
-
- DGAP_LOCK(ch->ch_lock, lock_flags);
- tmp = dgap_get_custom_baud(ch);
- DGAP_UNLOCK(ch->ch_lock, lock_flags);
-
- DPR_IOCTL(("DIGI_GETCUSTOMBAUD. Returning %d\n", tmp));
-
- if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
- return (-EFAULT);
-
- return (0);
-}
-
-
-/*
- * dgap_tty_digisetcustombaud()
- *
- * Ioctl to set the custom baud rate setting
- */
-static int dgap_tty_digisetcustombaud(struct tty_struct *tty, int __user *new_info)
-{
- struct board_t *bd;
- struct channel_t *ch;
- struct un_t *un;
- uint new_rate;
- ulong lock_flags;
- ulong lock_flags2;
-
- DPR_IOCTL(("DIGI_SETCUSTOMBAUD start\n"));
-
- if (!tty || tty->magic != TTY_MAGIC)
- return (-EFAULT);
-
- un = tty->driver_data;
- if (!un || un->magic != DGAP_UNIT_MAGIC)
- return (-EFAULT);
-
- ch = un->un_ch;
- if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
- return (-EFAULT);
-
- bd = ch->ch_bd;
- if (!bd || bd->magic != DGAP_BOARD_MAGIC)
- return (-EFAULT);
-
-
- if (copy_from_user(&new_rate, new_info, sizeof(unsigned int))) {
- DPR_IOCTL(("DIGI_SETCUSTOMBAUD failed copy_from_user\n"));
- return(-EFAULT);
- }
-
- if (bd->bd_flags & BD_FEP5PLUS) {
-
- DPR_IOCTL(("DIGI_SETCUSTOMBAUD. Setting %d\n", new_rate));
-
- DGAP_LOCK(bd->bd_lock, lock_flags);
- DGAP_LOCK(ch->ch_lock, lock_flags2);
-
- ch->ch_custom_speed = new_rate;
-
- dgap_param(tty);
-
- DGAP_UNLOCK(ch->ch_lock, lock_flags2);
- DGAP_UNLOCK(bd->bd_lock, lock_flags);
- }
-
- DPR_IOCTL(("DIGI_SETCUSTOMBAUD finish\n"));
-
- return(0);
-}
-
-
-/*
- * dgap_set_termios()
- */
-static void dgap_tty_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
-{
- struct board_t *bd;
- struct channel_t *ch;
- struct un_t *un;
- unsigned long lock_flags;
- unsigned long lock_flags2;
-
- if (!tty || tty->magic != TTY_MAGIC)
- return;
-
- un = tty->driver_data;
- if (!un || un->magic != DGAP_UNIT_MAGIC)
- return;
-
- ch = un->un_ch;
- if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
- return;
-
- bd = ch->ch_bd;
- if (!bd || bd->magic != DGAP_BOARD_MAGIC)
- return;
-
- DGAP_LOCK(bd->bd_lock, lock_flags);
- DGAP_LOCK(ch->ch_lock, lock_flags2);
-
- ch->ch_c_cflag = tty->termios.c_cflag;
- ch->ch_c_iflag = tty->termios.c_iflag;
- ch->ch_c_oflag = tty->termios.c_oflag;
- ch->ch_c_lflag = tty->termios.c_lflag;
- ch->ch_startc = tty->termios.c_cc[VSTART];
- ch->ch_stopc = tty->termios.c_cc[VSTOP];
-
- dgap_carrier(ch);
- dgap_param(tty);
-
- DGAP_UNLOCK(ch->ch_lock, lock_flags2);
- DGAP_UNLOCK(bd->bd_lock, lock_flags);
-}
-
-
-static void dgap_tty_throttle(struct tty_struct *tty)
-{
- struct board_t *bd;
- struct channel_t *ch;
- struct un_t *un;
- ulong lock_flags;
- ulong lock_flags2;
-
- if (!tty || tty->magic != TTY_MAGIC)
- return;
-
- un = tty->driver_data;
- if (!un || un->magic != DGAP_UNIT_MAGIC)
- return;
-
- ch = un->un_ch;
- if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
- return;
-
- bd = ch->ch_bd;
- if (!bd || bd->magic != DGAP_BOARD_MAGIC)
- return;
-
- DPR_IOCTL(("dgap_tty_throttle start\n"));
-
- DGAP_LOCK(bd->bd_lock, lock_flags);
- DGAP_LOCK(ch->ch_lock, lock_flags2);
-
- ch->ch_flags |= (CH_RXBLOCK);
-#if 1
- dgap_cmdw(ch, RPAUSE, 0, 0);
-#endif
-
- DGAP_UNLOCK(ch->ch_lock, lock_flags2);
- DGAP_UNLOCK(bd->bd_lock, lock_flags);
-
- DPR_IOCTL(("dgap_tty_throttle finish\n"));
-}
-
-
-static void dgap_tty_unthrottle(struct tty_struct *tty)
-{
- struct board_t *bd;
- struct channel_t *ch;
- struct un_t *un;
- ulong lock_flags;
- ulong lock_flags2;
-
- if (!tty || tty->magic != TTY_MAGIC)
- return;
-
- un = tty->driver_data;
- if (!un || un->magic != DGAP_UNIT_MAGIC)
- return;
-
- ch = un->un_ch;
- if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
- return;
-
- bd = ch->ch_bd;
- if (!bd || bd->magic != DGAP_BOARD_MAGIC)
- return;
-
- DPR_IOCTL(("dgap_tty_unthrottle start\n"));
-
- DGAP_LOCK(bd->bd_lock, lock_flags);
- DGAP_LOCK(ch->ch_lock, lock_flags2);
-
- ch->ch_flags &= ~(CH_RXBLOCK);
-
-#if 1
- dgap_cmdw(ch, RRESUME, 0, 0);
-#endif
-
- DGAP_UNLOCK(ch->ch_lock, lock_flags2);
- DGAP_UNLOCK(bd->bd_lock, lock_flags);
-
- DPR_IOCTL(("dgap_tty_unthrottle finish\n"));
-}
-
-
-static void dgap_tty_start(struct tty_struct *tty)
-{
- struct board_t *bd;
- struct channel_t *ch;
- struct un_t *un;
- ulong lock_flags;
- ulong lock_flags2;
-
- if (!tty || tty->magic != TTY_MAGIC)
- return;
-
- un = tty->driver_data;
- if (!un || un->magic != DGAP_UNIT_MAGIC)
- return;
-
- ch = un->un_ch;
- if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
- return;
-
- bd = ch->ch_bd;
- if (!bd || bd->magic != DGAP_BOARD_MAGIC)
- return;
-
- DPR_IOCTL(("dgap_tty_start start\n"));
-
- DGAP_LOCK(bd->bd_lock, lock_flags);
- DGAP_LOCK(ch->ch_lock, lock_flags2);
-
- dgap_cmdw(ch, RESUMETX, 0, 0);
-
- DGAP_UNLOCK(ch->ch_lock, lock_flags2);
- DGAP_UNLOCK(bd->bd_lock, lock_flags);
-
- DPR_IOCTL(("dgap_tty_start finish\n"));
-}
-
-
-static void dgap_tty_stop(struct tty_struct *tty)
-{
- struct board_t *bd;
- struct channel_t *ch;
- struct un_t *un;
- ulong lock_flags;
- ulong lock_flags2;
-
- if (!tty || tty->magic != TTY_MAGIC)
- return;
-
- un = tty->driver_data;
- if (!un || un->magic != DGAP_UNIT_MAGIC)
- return;
-
- ch = un->un_ch;
- if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
- return;
-
- bd = ch->ch_bd;
- if (!bd || bd->magic != DGAP_BOARD_MAGIC)
- return;
-
- DPR_IOCTL(("dgap_tty_stop start\n"));
-
- DGAP_LOCK(bd->bd_lock, lock_flags);
- DGAP_LOCK(ch->ch_lock, lock_flags2);
-
- dgap_cmdw(ch, PAUSETX, 0, 0);
-
- DGAP_UNLOCK(ch->ch_lock, lock_flags2);
- DGAP_UNLOCK(bd->bd_lock, lock_flags);
-
- DPR_IOCTL(("dgap_tty_stop finish\n"));
-}
-
-
-/*
- * dgap_tty_flush_chars()
- *
- * Flush the cook buffer
- *
- * Note to self, and any other poor souls who venture here:
- *
- * flush in this case DOES NOT mean dispose of the data.
- * instead, it means "stop buffering and send it if you
- * haven't already." Just guess how I figured that out... SRW 2-Jun-98
- *
- * It is also always called in interrupt context - JAR 8-Sept-99
- */
-static void dgap_tty_flush_chars(struct tty_struct *tty)
-{
- struct board_t *bd;
- struct channel_t *ch;
- struct un_t *un;
- ulong lock_flags;
- ulong lock_flags2;
-
- if (!tty || tty->magic != TTY_MAGIC)
- return;
-
- un = tty->driver_data;
- if (!un || un->magic != DGAP_UNIT_MAGIC)
- return;
-
- ch = un->un_ch;
- if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
- return;
-
- bd = ch->ch_bd;
- if (!bd || bd->magic != DGAP_BOARD_MAGIC)
- return;
-
- DPR_IOCTL(("dgap_tty_flush_chars start\n"));
-
- DGAP_LOCK(bd->bd_lock, lock_flags);
- DGAP_LOCK(ch->ch_lock, lock_flags2);
-
- /* TODO: Do something here */
-
- DGAP_UNLOCK(ch->ch_lock, lock_flags2);
- DGAP_UNLOCK(bd->bd_lock, lock_flags);
-
- DPR_IOCTL(("dgap_tty_flush_chars finish\n"));
-}
-
-
-
-/*
- * dgap_tty_flush_buffer()
- *
- * Flush Tx buffer (make in == out)
- */
-static void dgap_tty_flush_buffer(struct tty_struct *tty)
-{
- struct board_t *bd;
- struct channel_t *ch;
- struct un_t *un;
- ulong lock_flags;
- ulong lock_flags2;
- u16 head = 0;
-
- if (!tty || tty->magic != TTY_MAGIC)
- return;
-
- un = tty->driver_data;
- if (!un || un->magic != DGAP_UNIT_MAGIC)
- return;
-
- ch = un->un_ch;
- if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
- return;
-
- bd = ch->ch_bd;
- if (!bd || bd->magic != DGAP_BOARD_MAGIC)
- return;
-
- DPR_IOCTL(("dgap_tty_flush_buffer on port: %d start\n", ch->ch_portnum));
-
- DGAP_LOCK(bd->bd_lock, lock_flags);
- DGAP_LOCK(ch->ch_lock, lock_flags2);
-
- ch->ch_flags &= ~CH_STOP;
- head = readw(&(ch->ch_bs->tx_head));
- dgap_cmdw(ch, FLUSHTX, (u16) head, 0);
- dgap_cmdw(ch, RESUMETX, 0, 0);
- if (ch->ch_tun.un_flags & (UN_LOW|UN_EMPTY)) {
- ch->ch_tun.un_flags &= ~(UN_LOW|UN_EMPTY);
- wake_up_interruptible(&ch->ch_tun.un_flags_wait);
- }
- if (ch->ch_pun.un_flags & (UN_LOW|UN_EMPTY)) {
- ch->ch_pun.un_flags &= ~(UN_LOW|UN_EMPTY);
- wake_up_interruptible(&ch->ch_pun.un_flags_wait);
- }
-
- DGAP_UNLOCK(ch->ch_lock, lock_flags2);
- DGAP_UNLOCK(bd->bd_lock, lock_flags);
- if (waitqueue_active(&tty->write_wait))
- wake_up_interruptible(&tty->write_wait);
- tty_wakeup(tty);
-
- DPR_IOCTL(("dgap_tty_flush_buffer finish\n"));
-}
-
-
-
-/*****************************************************************************
- *
- * The IOCTL function and all of its helpers
- *
- *****************************************************************************/
-
-/*
- * dgap_tty_ioctl()
- *
- * The usual assortment of ioctl's
- */
-static int dgap_tty_ioctl(struct tty_struct *tty, unsigned int cmd,
- unsigned long arg)
-{
- struct board_t *bd;
- struct channel_t *ch;
- struct un_t *un;
- int rc;
- u16 head = 0;
- ulong lock_flags = 0;
- ulong lock_flags2 = 0;
- void __user *uarg = (void __user *) arg;
-
- if (!tty || tty->magic != TTY_MAGIC)
- return (-ENODEV);
-
- un = tty->driver_data;
- if (!un || un->magic != DGAP_UNIT_MAGIC)
- return (-ENODEV);
-
- ch = un->un_ch;
- if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
- return (-ENODEV);
-
- bd = ch->ch_bd;
- if (!bd || bd->magic != DGAP_BOARD_MAGIC)
- return (-ENODEV);
-
- DPR_IOCTL(("dgap_tty_ioctl start on port %d - cmd %s (%x), arg %lx\n",
- ch->ch_portnum, dgap_ioctl_name(cmd), cmd, arg));
-
- DGAP_LOCK(bd->bd_lock, lock_flags);
- DGAP_LOCK(ch->ch_lock, lock_flags2);
-
- if (un->un_open_count <= 0) {
- DPR_BASIC(("dgap_tty_ioctl - unit not open.\n"));
- DGAP_UNLOCK(ch->ch_lock, lock_flags2);
- DGAP_UNLOCK(bd->bd_lock, lock_flags);
- return(-EIO);
- }
-
- switch (cmd) {
-
- /* Here are all the standard ioctl's that we MUST implement */
-
- case TCSBRK:
- /*
- * TCSBRK is SVID version: non-zero arg --> no break
- * this behaviour is exploited by tcdrain().
- *
- * According to POSIX.1 spec (7.2.2.1.2) breaks should be
- * between 0.25 and 0.5 seconds so we'll ask for something
- * in the middle: 0.375 seconds.
- */
- rc = tty_check_change(tty);
- DGAP_UNLOCK(ch->ch_lock, lock_flags2);
- DGAP_UNLOCK(bd->bd_lock, lock_flags);
- if (rc) {
- return(rc);
- }
-
- rc = dgap_wait_for_drain(tty);
-
- if (rc) {
- DPR_IOCTL(("dgap_tty_ioctl - bad return: %d ", rc));
- return(-EINTR);
- }
-
- DGAP_LOCK(bd->bd_lock, lock_flags);
- DGAP_LOCK(ch->ch_lock, lock_flags2);
-
- if(((cmd == TCSBRK) && (!arg)) || (cmd == TCSBRKP)) {
- dgap_cmdw(ch, SBREAK, (u16) SBREAK_TIME, 0);
- }
-
- DGAP_UNLOCK(ch->ch_lock, lock_flags2);
- DGAP_UNLOCK(bd->bd_lock, lock_flags);
-
- DPR_IOCTL(("dgap_tty_ioctl finish on port %d - cmd %s (%x), arg %lx\n",
- ch->ch_portnum, dgap_ioctl_name(cmd), cmd, arg));
-
- return(0);
-
-
- case TCSBRKP:
- /* support for POSIX tcsendbreak()
-
- * According to POSIX.1 spec (7.2.2.1.2) breaks should be
- * between 0.25 and 0.5 seconds so we'll ask for something
- * in the middle: 0.375 seconds.
- */
- rc = tty_check_change(tty);
- DGAP_UNLOCK(ch->ch_lock, lock_flags2);
- DGAP_UNLOCK(bd->bd_lock, lock_flags);
- if (rc) {
- return(rc);
- }
-
- rc = dgap_wait_for_drain(tty);
- if (rc) {
- DPR_IOCTL(("dgap_tty_ioctl - bad return: %d ", rc));
- return(-EINTR);
- }
-
- DGAP_LOCK(bd->bd_lock, lock_flags);
- DGAP_LOCK(ch->ch_lock, lock_flags2);
-
- dgap_cmdw(ch, SBREAK, (u16) SBREAK_TIME, 0);
-
- DGAP_UNLOCK(ch->ch_lock, lock_flags2);
- DGAP_UNLOCK(bd->bd_lock, lock_flags);
-
- DPR_IOCTL(("dgap_tty_ioctl finish on port %d - cmd %s (%x), arg %lx\n",
- ch->ch_portnum, dgap_ioctl_name(cmd), cmd, arg));
-
- return(0);
-
- case TIOCSBRK:
- /*
- * FEP5 doesn't support turning on a break unconditionally.
- * The FEP5 device will stop sending a break automatically
- * after the specified time value that was sent when turning on
- * the break.
- */
- rc = tty_check_change(tty);
- DGAP_UNLOCK(ch->ch_lock, lock_flags2);
- DGAP_UNLOCK(bd->bd_lock, lock_flags);
- if (rc) {
- return(rc);
- }
-
- rc = dgap_wait_for_drain(tty);
- if (rc) {
- DPR_IOCTL(("dgap_tty_ioctl - bad return: %d ", rc));
- return(-EINTR);
- }
-
- DGAP_LOCK(bd->bd_lock, lock_flags);
- DGAP_LOCK(ch->ch_lock, lock_flags2);
-
- dgap_cmdw(ch, SBREAK, (u16) SBREAK_TIME, 0);
-
- DGAP_UNLOCK(ch->ch_lock, lock_flags2);
- DGAP_UNLOCK(bd->bd_lock, lock_flags);
-
- DPR_IOCTL(("dgap_tty_ioctl finish on port %d - cmd %s (%x), arg %lx\n",
- ch->ch_portnum, dgap_ioctl_name(cmd), cmd, arg));
-
- return 0;
-
- case TIOCCBRK:
- /*
- * FEP5 doesn't support turning off a break unconditionally.
- * The FEP5 device will stop sending a break automatically
- * after the specified time value that was sent when turning on
- * the break.
- */
- DGAP_UNLOCK(ch->ch_lock, lock_flags2);
- DGAP_UNLOCK(bd->bd_lock, lock_flags);
- return 0;
-
- case TIOCGSOFTCAR:
-
- DGAP_UNLOCK(ch->ch_lock, lock_flags2);
- DGAP_UNLOCK(bd->bd_lock, lock_flags);
-
- rc = put_user(C_CLOCAL(tty) ? 1 : 0, (unsigned long __user *) arg);
- return(rc);
-
- case TIOCSSOFTCAR:
- DGAP_UNLOCK(ch->ch_lock, lock_flags2);
- DGAP_UNLOCK(bd->bd_lock, lock_flags);
-
- rc = get_user(arg, (unsigned long __user *) arg);
- if (rc)
- return(rc);
-
- DGAP_LOCK(bd->bd_lock, lock_flags);
- DGAP_LOCK(ch->ch_lock, lock_flags2);
- tty->termios.c_cflag = ((tty->termios.c_cflag & ~CLOCAL) | (arg ? CLOCAL : 0));
- dgap_param(tty);
- DGAP_UNLOCK(ch->ch_lock, lock_flags2);
- DGAP_UNLOCK(bd->bd_lock, lock_flags);
-
- return(0);
-
- case TIOCMGET:
- DGAP_UNLOCK(ch->ch_lock, lock_flags2);
- DGAP_UNLOCK(bd->bd_lock, lock_flags);
- return(dgap_get_modem_info(ch, uarg));
-
- case TIOCMBIS:
- case TIOCMBIC:
- case TIOCMSET:
- DGAP_UNLOCK(ch->ch_lock, lock_flags2);
- DGAP_UNLOCK(bd->bd_lock, lock_flags);
- return(dgap_set_modem_info(tty, cmd, uarg));
-
- /*
- * Here are any additional ioctl's that we want to implement
- */
-
- case TCFLSH:
- /*
- * The linux tty driver doesn't have a flush
- * input routine for the driver, assuming all backed
- * up data is in the line disc. buffers. However,
- * we all know that's not the case. Here, we
- * act on the ioctl, but then lie and say we didn't
- * so the line discipline will process the flush
- * also.
- */
- rc = tty_check_change(tty);
- if (rc) {
- DGAP_UNLOCK(ch->ch_lock, lock_flags2);
- DGAP_UNLOCK(bd->bd_lock, lock_flags);
- return(rc);
- }
-
- if ((arg == TCIFLUSH) || (arg == TCIOFLUSH)) {
- if (!(un->un_type == DGAP_PRINT)) {
- head = readw(&(ch->ch_bs->rx_head));
- writew(head, &(ch->ch_bs->rx_tail));
- writeb(0, &(ch->ch_bs->orun));
- }
- }
-
- if ((arg == TCOFLUSH) || (arg == TCIOFLUSH)) {
- ch->ch_flags &= ~CH_STOP;
- head = readw(&(ch->ch_bs->tx_head));
- dgap_cmdw(ch, FLUSHTX, (u16) head, 0 );
- dgap_cmdw(ch, RESUMETX, 0, 0);
- if (ch->ch_tun.un_flags & (UN_LOW|UN_EMPTY)) {
- ch->ch_tun.un_flags &= ~(UN_LOW|UN_EMPTY);
- wake_up_interruptible(&ch->ch_tun.un_flags_wait);
- }
- if (ch->ch_pun.un_flags & (UN_LOW|UN_EMPTY)) {
- ch->ch_pun.un_flags &= ~(UN_LOW|UN_EMPTY);
- wake_up_interruptible(&ch->ch_pun.un_flags_wait);
- }
- if (waitqueue_active(&tty->write_wait))
- wake_up_interruptible(&tty->write_wait);
-
- /* Can't hold any locks when calling tty_wakeup! */
- DGAP_UNLOCK(ch->ch_lock, lock_flags2);
- DGAP_UNLOCK(bd->bd_lock, lock_flags);
- tty_wakeup(tty);
- DGAP_LOCK(bd->bd_lock, lock_flags);
- DGAP_LOCK(ch->ch_lock, lock_flags2);
- }
-
- /* pretend we didn't recognize this IOCTL */
- DGAP_UNLOCK(ch->ch_lock, lock_flags2);
- DGAP_UNLOCK(bd->bd_lock, lock_flags);
-
- DPR_IOCTL(("dgap_tty_ioctl (LINE:%d) finish on port %d - cmd %s (%x), arg %lx\n",
- __LINE__, ch->ch_portnum, dgap_ioctl_name(cmd), cmd, arg));
-
- return(-ENOIOCTLCMD);
-
- case TCSETSF:
- case TCSETSW:
- /*
- * The linux tty driver doesn't have a flush
- * input routine for the driver, assuming all backed
- * up data is in the line disc. buffers. However,
- * we all know that's not the case. Here, we
- * act on the ioctl, but then lie and say we didn't
- * so the line discipline will process the flush
- * also.
- */
- if (cmd == TCSETSF) {
- /* flush rx */
- ch->ch_flags &= ~CH_STOP;
- head = readw(&(ch->ch_bs->rx_head));
- writew(head, &(ch->ch_bs->rx_tail));
- }
-
- /* now wait for all the output to drain */
- DGAP_UNLOCK(ch->ch_lock, lock_flags2);
- DGAP_UNLOCK(bd->bd_lock, lock_flags);
- rc = dgap_wait_for_drain(tty);
- if (rc) {
- DPR_IOCTL(("dgap_tty_ioctl - bad return: %d ", rc));
- return(-EINTR);
- }
-
- DPR_IOCTL(("dgap_tty_ioctl finish on port %d - cmd %s (%x), arg %lx\n",
- ch->ch_portnum, dgap_ioctl_name(cmd), cmd, arg));
-
- /* pretend we didn't recognize this */
- return(-ENOIOCTLCMD);
-
- case TCSETAW:
-
- DGAP_UNLOCK(ch->ch_lock, lock_flags2);
- DGAP_UNLOCK(bd->bd_lock, lock_flags);
- rc = dgap_wait_for_drain(tty);
- if (rc) {
- DPR_IOCTL(("dgap_tty_ioctl - bad return: %d ", rc));
- return(-EINTR);
- }
-
- /* pretend we didn't recognize this */
- return(-ENOIOCTLCMD);
-
- case TCXONC:
- /*
- * The Linux Line Discipline (LD) would do this for us if we
- * let it, but we have the special firmware options to do this
- * the "right way" regardless of hardware or software flow
- * control so we'll do it outselves instead of letting the LD
- * do it.
- */
- rc = tty_check_change(tty);
- if (rc) {
- DGAP_UNLOCK(ch->ch_lock, lock_flags2);
- DGAP_UNLOCK(bd->bd_lock, lock_flags);
- return(rc);
- }
-
- DPR_IOCTL(("dgap_ioctl - in TCXONC - %d\n", cmd));
- switch (arg) {
-
- case TCOON:
- DGAP_UNLOCK(ch->ch_lock, lock_flags2);
- DGAP_UNLOCK(bd->bd_lock, lock_flags);
- dgap_tty_start(tty);
- return(0);
- case TCOOFF:
- DGAP_UNLOCK(ch->ch_lock, lock_flags2);
- DGAP_UNLOCK(bd->bd_lock, lock_flags);
- dgap_tty_stop(tty);
- return(0);
- case TCION:
- DGAP_UNLOCK(ch->ch_lock, lock_flags2);
- DGAP_UNLOCK(bd->bd_lock, lock_flags);
- /* Make the ld do it */
- return(-ENOIOCTLCMD);
- case TCIOFF:
- DGAP_UNLOCK(ch->ch_lock, lock_flags2);
- DGAP_UNLOCK(bd->bd_lock, lock_flags);
- /* Make the ld do it */
- return(-ENOIOCTLCMD);
- default:
- DGAP_UNLOCK(ch->ch_lock, lock_flags2);
- DGAP_UNLOCK(bd->bd_lock, lock_flags);
- return(-EINVAL);
- }
-
- case DIGI_GETA:
- /* get information for ditty */
- DGAP_UNLOCK(ch->ch_lock, lock_flags2);
- DGAP_UNLOCK(bd->bd_lock, lock_flags);
- return(dgap_tty_digigeta(tty, uarg));
-
- case DIGI_SETAW:
- case DIGI_SETAF:
-
- /* set information for ditty */
- if (cmd == (DIGI_SETAW)) {
-
- DGAP_UNLOCK(ch->ch_lock, lock_flags2);
- DGAP_UNLOCK(bd->bd_lock, lock_flags);
- rc = dgap_wait_for_drain(tty);
- if (rc) {
- DPR_IOCTL(("dgap_tty_ioctl - bad return: %d ", rc));
- return(-EINTR);
- }
- DGAP_LOCK(bd->bd_lock, lock_flags);
- DGAP_LOCK(ch->ch_lock, lock_flags2);
- }
- else {
- tty_ldisc_flush(tty);
- }
- /* fall thru */
-
- case DIGI_SETA:
- DGAP_UNLOCK(ch->ch_lock, lock_flags2);
- DGAP_UNLOCK(bd->bd_lock, lock_flags);
- return(dgap_tty_digiseta(tty, uarg));
-
- case DIGI_GEDELAY:
- DGAP_UNLOCK(ch->ch_lock, lock_flags2);
- DGAP_UNLOCK(bd->bd_lock, lock_flags);
- return(dgap_tty_digigetedelay(tty, uarg));
-
- case DIGI_SEDELAY:
- DGAP_UNLOCK(ch->ch_lock, lock_flags2);
- DGAP_UNLOCK(bd->bd_lock, lock_flags);
- return(dgap_tty_digisetedelay(tty, uarg));
-
- case DIGI_GETCUSTOMBAUD:
- DGAP_UNLOCK(ch->ch_lock, lock_flags2);
- DGAP_UNLOCK(bd->bd_lock, lock_flags);
- return(dgap_tty_digigetcustombaud(tty, uarg));
-
- case DIGI_SETCUSTOMBAUD:
- DGAP_UNLOCK(ch->ch_lock, lock_flags2);
- DGAP_UNLOCK(bd->bd_lock, lock_flags);
- return(dgap_tty_digisetcustombaud(tty, uarg));
-
- case DIGI_RESET_PORT:
- dgap_firmware_reset_port(ch);
- dgap_param(tty);
- DGAP_UNLOCK(ch->ch_lock, lock_flags2);
- DGAP_UNLOCK(bd->bd_lock, lock_flags);
- return 0;
-
- default:
- DGAP_UNLOCK(ch->ch_lock, lock_flags2);
- DGAP_UNLOCK(bd->bd_lock, lock_flags);
-
- DPR_IOCTL(("dgap_tty_ioctl - in default\n"));
- DPR_IOCTL(("dgap_tty_ioctl end - cmd %s (%x), arg %lx\n",
- dgap_ioctl_name(cmd), cmd, arg));
-
- return(-ENOIOCTLCMD);
- }
-}
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff