USB: EHCI: make ehci-w90X900 a separate driver
authorManjunath Goudar <manjunath.goudar@linaro.org>
Sat, 21 Sep 2013 11:14:42 +0000 (16:44 +0530)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Thu, 26 Sep 2013 16:47:22 +0000 (09:47 -0700)
Separate the W90X900(W90P910) on-chip host controller driver from
ehci-hcd host code so that it can be built as a separate driver module.
This work is part of enabling multi-platform kernels on ARM;
however, note that other changes are still needed before W90X900(W90P910)
can be booted with a multi-platform kernel

and an ehci driver that only works on one of them.

With the infrastructure added by Alan Stern in patch 3e0232039
"USB: EHCI: prepare to make ehci-hcd a library module", we can
avoid this problem by turning a bus glue into a separate
module, as we do here for the w90X900 bus glue.

This patch is rebased on greghk/usb-next 3.12 rc1.

Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org>
Signed-off-by: Deepak Saxena <dsaxena@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Wan ZongShun <mcuos.com@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/usb/host/Kconfig
drivers/usb/host/Makefile
drivers/usb/host/ehci-hcd.c
drivers/usb/host/ehci-w90x900.c

index 6c2d7df40edf1009973e83a0c329aaca93bb302b..7e7c52a081adec8070dedb8a1dd50dcee6846d34 100644 (file)
@@ -224,7 +224,7 @@ config USB_EHCI_MV
          on-chip EHCI USB controller" for those.
 
 config USB_W90X900_EHCI
-       bool "W90X900(W90P910) EHCI support"
+       tristate "W90X900(W90P910) EHCI support"
        depends on ARCH_W90X900
        ---help---
                Enables support for the W90X900 USB controller
index 50b0041c09a95464ed9ff353b090818e39d0112c..29fa3b839d8546d0680484b4ae260d66c2e0e16e 100644 (file)
@@ -38,6 +38,7 @@ obj-$(CONFIG_USB_EHCI_S5P)    += ehci-s5p.o
 obj-$(CONFIG_USB_EHCI_HCD_AT91) += ehci-atmel.o
 obj-$(CONFIG_USB_EHCI_MSM)     += ehci-msm.o
 obj-$(CONFIG_USB_EHCI_TEGRA)   += ehci-tegra.o
+obj-$(CONFIG_USB_W90X900_EHCI) += ehci-w90x900.o
 
 obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o
 obj-$(CONFIG_USB_ISP116X_HCD)  += isp116x-hcd.o
index 5d6022f30ebe94b2228c6b38851217af1ee8f477..3e3ca839e6cecdd8dc33300bd9fc68cf4cbd9d70 100644 (file)
@@ -1238,11 +1238,6 @@ MODULE_LICENSE ("GPL");
 #define XILINX_OF_PLATFORM_DRIVER      ehci_hcd_xilinx_of_driver
 #endif
 
-#ifdef CONFIG_USB_W90X900_EHCI
-#include "ehci-w90x900.c"
-#define        PLATFORM_DRIVER         ehci_hcd_w90x900_driver
-#endif
-
 #ifdef CONFIG_USB_OCTEON_EHCI
 #include "ehci-octeon.c"
 #define PLATFORM_DRIVER                ehci_octeon_driver
index 1c370dfbee0d35e6a3cf2b1288836df2116599c5..cdad8438c02b3171567f5e0084ba46ee480db669 100644 (file)
  *
  */
 
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+
+#include "ehci.h"
 
 /* enable phy0 and phy1 for w90p910 */
 #define        ENPHY           (0x01<<8)
 #define PHY0_CTR       (0xA4)
 #define PHY1_CTR       (0xA8)
 
+#define DRIVER_DESC "EHCI w90x900 driver"
+
+static const char hcd_name[] = "ehci-w90x900 ";
+
+static struct hc_driver __read_mostly ehci_w90x900_hc_driver;
+
 static int usb_w90x900_probe(const struct hc_driver *driver,
                      struct platform_device *pdev)
 {
@@ -90,8 +105,8 @@ err1:
        return retval;
 }
 
-static
-void usb_w90x900_remove(struct usb_hcd *hcd, struct platform_device *pdev)
+static void usb_w90x900_remove(struct usb_hcd *hcd,
+                       struct platform_device *pdev)
 {
        usb_remove_hcd(hcd);
        iounmap(hcd->regs);
@@ -99,54 +114,6 @@ void usb_w90x900_remove(struct usb_hcd *hcd, struct platform_device *pdev)
        usb_put_hcd(hcd);
 }
 
-static const struct hc_driver ehci_w90x900_hc_driver = {
-       .description = hcd_name,
-       .product_desc = "Nuvoton w90x900 EHCI Host Controller",
-       .hcd_priv_size = sizeof(struct ehci_hcd),
-
-       /*
-        * generic hardware linkage
-        */
-       .irq = ehci_irq,
-       .flags = HCD_USB2|HCD_MEMORY|HCD_BH,
-
-       /*
-        * basic lifecycle operations
-        */
-       .reset = ehci_setup,
-       .start = ehci_run,
-
-       .stop = ehci_stop,
-       .shutdown = ehci_shutdown,
-
-       /*
-        * managing i/o requests and associated device resources
-        */
-       .urb_enqueue = ehci_urb_enqueue,
-       .urb_dequeue = ehci_urb_dequeue,
-       .endpoint_disable = ehci_endpoint_disable,
-       .endpoint_reset = ehci_endpoint_reset,
-
-       /*
-        * scheduling support
-        */
-       .get_frame_number = ehci_get_frame,
-
-       /*
-        * root hub support
-        */
-       .hub_status_data = ehci_hub_status_data,
-       .hub_control = ehci_hub_control,
-#ifdef CONFIG_PM
-       .bus_suspend = ehci_bus_suspend,
-       .bus_resume = ehci_bus_resume,
-#endif
-       .relinquish_port        = ehci_relinquish_port,
-       .port_handed_over       = ehci_port_handed_over,
-
-       .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
-};
-
 static int ehci_w90x900_probe(struct platform_device *pdev)
 {
        if (usb_disabled())
@@ -173,7 +140,25 @@ static struct platform_driver ehci_hcd_w90x900_driver = {
        },
 };
 
+static int __init ehci_w90X900_init(void)
+{
+       if (usb_disabled())
+               return -ENODEV;
+
+       pr_info("%s: " DRIVER_DESC "\n", hcd_name);
+
+       ehci_init_driver(&ehci_w90x900_hc_driver, NULL);
+       return platform_driver_register(&ehci_hcd_w90x900_driver);
+}
+module_init(ehci_w90X900_init);
+
+static void __exit ehci_w90X900_cleanup(void)
+{
+       platform_driver_unregister(&ehci_hcd_w90x900_driver);
+}
+module_exit(ehci_w90X900_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>");
-MODULE_DESCRIPTION("w90p910 usb ehci driver!");
-MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:w90p910-ehci");
+MODULE_LICENSE("GPL v2");