* outputs in a "wire-AND" configuration, with no per-chip signals.
*/
struct davinci_nand_info {
- struct mtd_info mtd;
struct nand_chip chip;
struct nand_ecclayout ecclayout;
static DEFINE_SPINLOCK(davinci_nand_lock);
static bool ecc4_busy;
-#define to_davinci_nand(m) container_of(m, struct davinci_nand_info, mtd)
-
+static inline struct davinci_nand_info *to_davinci_nand(struct mtd_info *mtd)
+{
+ return container_of(mtd_to_nand(mtd), struct davinci_nand_info, chip);
+}
static inline unsigned int davinci_nand_readl(struct davinci_nand_info *info,
int offset)
int ret;
uint32_t val;
nand_ecc_modes_t ecc_mode;
+ struct mtd_info *mtd;
pdata = nand_davinci_get_pdata(pdev);
if (IS_ERR(pdata))
info->base = base;
info->vaddr = vaddr;
- info->mtd.priv = &info->chip;
- info->mtd.dev.parent = &pdev->dev;
+ mtd = nand_to_mtd(&info->chip);
+ mtd->priv = &info->chip;
+ mtd->dev.parent = &pdev->dev;
nand_set_flash_node(&info->chip, pdev->dev.of_node);
info->chip.IO_ADDR_R = vaddr;
spin_unlock_irq(&davinci_nand_lock);
/* Scan to find existence of the device(s) */
- ret = nand_scan_ident(&info->mtd, pdata->mask_chipsel ? 2 : 1, NULL);
+ ret = nand_scan_ident(mtd, pdata->mask_chipsel ? 2 : 1, NULL);
if (ret < 0) {
dev_dbg(&pdev->dev, "no NAND chip(s) found\n");
goto err;
* usable: 10 bytes are needed, not 6.
*/
if (pdata->ecc_bits == 4) {
- int chunks = info->mtd.writesize / 512;
+ int chunks = mtd->writesize / 512;
- if (!chunks || info->mtd.oobsize < 16) {
+ if (!chunks || mtd->oobsize < 16) {
dev_dbg(&pdev->dev, "too small\n");
ret = -EINVAL;
goto err;
*/
if (chunks == 1) {
info->ecclayout = hwecc4_small;
- info->ecclayout.oobfree[1].length =
- info->mtd.oobsize - 16;
+ info->ecclayout.oobfree[1].length = mtd->oobsize - 16;
goto syndrome_done;
}
if (chunks == 4) {
info->chip.ecc.layout = &info->ecclayout;
}
- ret = nand_scan_tail(&info->mtd);
+ ret = nand_scan_tail(mtd);
if (ret < 0)
goto err;
if (pdata->parts)
- ret = mtd_device_parse_register(&info->mtd, NULL, NULL,
+ ret = mtd_device_parse_register(mtd, NULL, NULL,
pdata->parts, pdata->nr_parts);
else
- ret = mtd_device_register(&info->mtd, NULL, 0);
+ ret = mtd_device_register(mtd, NULL, 0);
if (ret < 0)
goto err;
ecc4_busy = false;
spin_unlock_irq(&davinci_nand_lock);
- nand_release(&info->mtd);
+ nand_release(nand_to_mtd(&info->chip));
clk_disable_unprepare(info->clk);