staging: comedi: rtd520: remove RtdPlxInterruptWrite macro

This macro uses the 'devpriv' macro which relies on a local variable
having a specific name. Plus it's just a wrapper around a simple
'writel'. Remove the macro.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/comedi/drivers/rtd520.c b/drivers/staging/comedi/drivers/rtd520.c
index 486a7fc97d7d4a3589d8eb83daf3af0a9fd2fd9d..202e1d8178c76b13bffa4e071d178b3fdf0a53e9 100644 (file)
--- a/drivers/staging/comedi/drivers/rtd520.c
+++ b/drivers/staging/comedi/drivers/rtd520.c
@@ -406,10 +406,6 @@ struct rtdPrivate {
 
 /* Macros to access registers */
 
-/* PLX9080 interrupt mask and status */
-#define RtdPlxInterruptWrite(dev, v) \
-       writel(v, devpriv->lcfg+LCFG_ITCSR)
-
 /* Set  mode for DMA 0 */
 #define RtdDma0Mode(dev, m) \
        writel((m), devpriv->lcfg+LCFG_DMAMODE0)
@@ -1008,8 +1004,8 @@ transferDone:
        writew(devpriv->intMask, devpriv->las0 + LAS0_IT);
 #ifdef USE_DMA
        if (devpriv->flags & DMA0_ACTIVE) {
-               RtdPlxInterruptWrite(dev,
-                       readl(devpriv->lcfg + LCFG_ITCSR) & ~ICS_DMA0_E);
+               writel(readl(devpriv->lcfg + LCFG_ITCSR) & ~ICS_DMA0_E,
+                       devpriv->lcfg + LCFG_ITCSR);
                abort_dma(dev, 0);
                devpriv->flags &= ~DMA0_ACTIVE;
                /* if Using DMA, then we should have read everything by now */
@@ -1279,8 +1275,8 @@ static int rtd_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
        writew(devpriv->intMask, devpriv->las0 + LAS0_IT);
 #ifdef USE_DMA
        if (devpriv->flags & DMA0_ACTIVE) {     /* cancel anything running */
-               RtdPlxInterruptWrite(dev,
-                       readl(devpriv->lcfg + LCFG_ITCSR) & ~ICS_DMA0_E);
+               writel(readl(devpriv->lcfg + LCFG_ITCSR) & ~ICS_DMA0_E,
+                       devpriv->lcfg + LCFG_ITCSR);
                abort_dma(dev, 0);
                devpriv->flags &= ~DMA0_ACTIVE;
                if (readl(devpriv->lcfg + LCFG_ITCSR) & ICS_DMA0_A)
@@ -1446,8 +1442,8 @@ static int rtd_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
                RtdDma0Next(dev,        /* point to first block */
                            devpriv->dma0Chain[DMA_CHAIN_COUNT - 1].next);
                writel(DMAS_ADFIFO_HALF_FULL, devpriv->las0 + LAS0_DMA0_SRC);
-               RtdPlxInterruptWrite(dev,
-                       readl(devpriv->lcfg + LCFG_ITCSR) | ICS_DMA0_E);
+               writel(readl(devpriv->lcfg + LCFG_ITCSR) | ICS_DMA0_E,
+                       devpriv->lcfg + LCFG_ITCSR);
                /* Must be 2 steps.  See PLX app note about "Starting a DMA transfer" */
                RtdDma0Control(dev, PLX_DMA_EN_BIT);    /* enable DMA (clear INTR?) */
                RtdDma0Control(dev, PLX_DMA_EN_BIT | PLX_DMA_START_BIT);        /*start DMA */
@@ -1482,8 +1478,8 @@ static int rtd_ai_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
        devpriv->aiCount = 0;   /* stop and don't transfer any more */
 #ifdef USE_DMA
        if (devpriv->flags & DMA0_ACTIVE) {
-               RtdPlxInterruptWrite(dev,
-                       readl(devpriv->lcfg + LCFG_ITCSR) & ~ICS_DMA0_E);
+               writel(readl(devpriv->lcfg + LCFG_ITCSR) & ~ICS_DMA0_E,
+                       devpriv->lcfg + LCFG_ITCSR);
                abort_dma(dev, 0);
                devpriv->flags &= ~DMA0_ACTIVE;
        }
@@ -1832,7 +1828,7 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it)
        /* also, initialize shadow registers */
        writel(0, devpriv->las0 + LAS0_BOARD_RESET);
        udelay(100);            /* needed? */
-       RtdPlxInterruptWrite(dev, 0);
+       writel(0, devpriv->lcfg + LCFG_ITCSR);
        devpriv->intMask = 0;
        writew(devpriv->intMask, devpriv->las0 + LAS0_IT);
        devpriv->intClearMask = ~0;
@@ -1947,9 +1943,8 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it)
        }
 #endif /* USE_DMA */
 
-       if (dev->irq) {         /* enable plx9080 interrupts */
-               RtdPlxInterruptWrite(dev, ICS_PIE | ICS_PLIE);
-       }
+       if (dev->irq)
+               writel(ICS_PIE | ICS_PLIE, devpriv->lcfg + LCFG_ITCSR);
 
        printk("\ncomedi%d: rtd520 driver attached.\n", dev->minor);
 
@@ -1979,9 +1974,9 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 #endif /* USE_DMA */
        /* subdevices and priv are freed by the core */
        if (dev->irq) {
-               RtdPlxInterruptWrite(dev,
-                       readl(devpriv->lcfg + LCFG_ITCSR) &
-                               ~(ICS_PLIE | ICS_DMA0_E | ICS_DMA1_E));
+               writel(readl(devpriv->lcfg + LCFG_ITCSR) &
+                       ~(ICS_PLIE | ICS_DMA0_E | ICS_DMA1_E),
+                       devpriv->lcfg + LCFG_ITCSR);
                free_irq(dev->irq, dev);
        }
 
@@ -2014,7 +2009,7 @@ static void rtd_detach(struct comedi_device *dev)
                if (devpriv->lcfg) {
                        RtdDma0Control(dev, 0); /* disable DMA */
                        RtdDma1Control(dev, 0); /* disable DMA */
-                       RtdPlxInterruptWrite(dev, ICS_PIE | ICS_PLIE);
+                       writel(ICS_PIE | ICS_PLIE, devpriv->lcfg + LCFG_ITCSR);
                }
 #endif /* USE_DMA */
                if (devpriv->las0) {
@@ -2048,9 +2043,9 @@ static void rtd_detach(struct comedi_device *dev)
                }
 #endif /* USE_DMA */
                if (dev->irq) {
-                       RtdPlxInterruptWrite(dev,
-                               readl(devpriv->lcfg + LCFG_ITCSR) &
-                                       ~(ICS_PLIE | ICS_DMA0_E | ICS_DMA1_E));
+                       writel(readl(devpriv->lcfg + LCFG_ITCSR) &
+                               ~(ICS_PLIE | ICS_DMA0_E | ICS_DMA1_E),
+                               devpriv->lcfg + LCFG_ITCSR);
                        free_irq(dev->irq, dev);
                }
                if (devpriv->las0)