gpio: exar: Use correct property prefix and document bindings

The device-specific property should be prefixed with the vendor name,
not "linux,", as Linus Walleij pointed out. Change this and document the
bindings of this platform device.

We didn't ship the old binding in a release yet. So we can still change
it without breaking an official API.

Fixes: 380b1e2f3a2f ("gpio-exar/8250-exar: Make set of exported GPIOs configurable")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

diff --git a/Documentation/devicetree/bindings/gpio/gpio-exar.txt b/Documentation/devicetree/bindings/gpio/gpio-exar.txt
new file mode 100644 (file)
index 0000000..4540d61
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-exar.txt
@@ -0,0 +1,5 @@
+Exportable MPIO interface of Exar UART chips
+
+Required properties of the device:
+ - exar,first-pin: first exportable pins (0..15)
+ - ngpios: number of exportable pins (1..16)

diff --git a/drivers/gpio/gpio-exar.c b/drivers/gpio/gpio-exar.c
index fb8d304cfa171fcb3a5372f413a54783a7e52b96..0ecd2369c2cad0daa5e08696ab85b91af5235a26 100644 (file)
--- a/drivers/gpio/gpio-exar.c
+++ b/drivers/gpio/gpio-exar.c
@@ -132,7 +132,7 @@ static int gpio_exar_probe(struct platform_device *pdev)
        if (!p)
                return -ENOMEM;
 
-       ret = device_property_read_u32(&pdev->dev, "linux,first-pin",
+       ret = device_property_read_u32(&pdev->dev, "exar,first-pin",
                                       &first_pin);
        if (ret)
                return ret;

diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index b5c98e5bf52402c2febb0b4d64d54dd19c739446..c6360fbdf808655524415e228d5779347b4d6276 100644 (file)
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -261,7 +261,7 @@ __xr17v35x_register_gpio(struct pci_dev *pcidev,
 }
 
 static const struct property_entry exar_gpio_properties[] = {
-       PROPERTY_ENTRY_U32("linux,first-pin", 0),
+       PROPERTY_ENTRY_U32("exar,first-pin", 0),
        PROPERTY_ENTRY_U32("ngpios", 16),
        { }
 };
@@ -326,7 +326,7 @@ static int iot2040_rs485_config(struct uart_port *port,
 }
 
 static const struct property_entry iot2040_gpio_properties[] = {
-       PROPERTY_ENTRY_U32("linux,first-pin", 10),
+       PROPERTY_ENTRY_U32("exar,first-pin", 10),
        PROPERTY_ENTRY_U32("ngpios", 1),
        { }
 };