serial: mfd: adjust the baud rate setting

Previous baud rate setting code only has been tested with 3.5M/9600/
115200/230400/460800 bps, and recently we got a 3M bps device to test,
which needs to modify current MUL register setting, and with this
patch 2.5M/2M/1.5M/1M/0.5M should also work as they just use a MUL
value scale down from 3M's.

Also got some reference register setting from silicon guys for
different baud rates, which tries to keep the pre-scalar register value
to 16.

Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/drivers/serial/mfd.c b/drivers/serial/mfd.c
index 5fc699e929dc50dff6601c3b00a2762c1f673a1f..d40010a22ecd788e6d90c69337333c7bed0bfc7b 100644 (file)
--- a/drivers/serial/mfd.c
+++ b/drivers/serial/mfd.c
@@ -900,8 +900,7 @@ serial_hsu_set_termios(struct uart_port *port, struct ktermios *termios,
        unsigned char cval, fcr = 0;
        unsigned long flags;
        unsigned int baud, quot;
-       u32 mul = 0x3600;
-       u32 ps = 0x10;
+       u32 ps, mul;
 
        switch (termios->c_cflag & CSIZE) {
        case CS5:
@@ -943,31 +942,24 @@ serial_hsu_set_termios(struct uart_port *port, struct ktermios *termios,
        baud = uart_get_baud_rate(port, termios, old, 0, 4000000);
 
        quot = 1;
+       ps = 0x10;
+       mul = 0x3600;
        switch (baud) {
        case 3500000:
                mul = 0x3345;
                ps = 0xC;
                break;
-       case 3000000:
-               mul = 0x2EE0;
-               break;
-       case 2500000:
-               mul = 0x2710;
-               break;
-       case 2000000:
-               mul = 0x1F40;
-               break;
        case 1843200:
                mul = 0x2400;
                break;
+       case 3000000:
+       case 2500000:
+       case 2000000:
        case 1500000:
-               mul = 0x1770;
-               break;
        case 1000000:
-               mul = 0xFA0;
-               break;
        case 500000:
-               mul = 0x7D0;
+               /* mul/ps/quot = 0x9C4/0x10/0x1 will make a 500000 bps */
+               mul = baud / 500000 * 0x9C4;
                break;
        default:
                /* Use uart_get_divisor to get quot for other baud rates */