* Microchip Technology, 24C01A/02A/04A Data Sheet
* available in PDF format from www.microchip.com
*
- * Change History
- *
- * Tigran Aivazian <tigran@sco.com>: TLan_PciProbe() now uses
- * new PCI BIOS interface.
- * Alan Cox <alan@lxorguk.ukuu.org.uk>:
- * Fixed the out of memory
- * handling.
- *
- * Torben Mathiasen <torben.mathiasen@compaq.com> New Maintainer!
- *
- * v1.1 Dec 20, 1999 - Removed linux version checking
- * Patch from Tigran Aivazian.
- * - v1.1 includes Alan's SMP updates.
- * - We still have problems on SMP though,
- * but I'm looking into that.
- *
- * v1.2 Jan 02, 2000 - Hopefully fixed the SMP deadlock.
- * - Removed dependency of HZ being 100.
- * - We now allow higher priority timers to
- * overwrite timers like TLAN_TIMER_ACTIVITY
- * Patch from John Cagle <john.cagle@compaq.com>.
- * - Fixed a few compiler warnings.
- *
- * v1.3 Feb 04, 2000 - Fixed the remaining HZ issues.
- * - Removed call to pci_present().
- * - Removed SA_INTERRUPT flag from irq handler.
- * - Added __init and __initdata to reduce resisdent
- * code size.
- * - Driver now uses module_init/module_exit.
- * - Rewrote init_module and tlan_probe to
- * share a lot more code. We now use tlan_probe
- * with builtin and module driver.
- * - Driver ported to new net API.
- * - tlan.txt has been reworked to reflect current
- * driver (almost)
- * - Other minor stuff
- *
- * v1.4 Feb 10, 2000 - Updated with more changes required after Dave's
- * network cleanup in 2.3.43pre7 (Tigran & myself)
- * - Minor stuff.
- *
- * v1.5 March 22, 2000 - Fixed another timer bug that would hang the
- * driver if no cable/link were present.
- * - Cosmetic changes.
- * - TODO: Port completely to new PCI/DMA API
- * Auto-Neg fallback.
- *
- * v1.6 April 04, 2000 - Fixed driver support for kernel-parameters.
- * Haven't tested it though, as the kernel support
- * is currently broken (2.3.99p4p3).
- * - Updated tlan.txt accordingly.
- * - Adjusted minimum/maximum frame length.
- * - There is now a TLAN website up at
- * http://hp.sourceforge.net/
- *
- * v1.7 April 07, 2000 - Started to implement custom ioctls. Driver now
- * reports PHY information when used with Donald
- * Beckers userspace MII diagnostics utility.
- *
- * v1.8 April 23, 2000 - Fixed support for forced speed/duplex settings.
- * - Added link information to Auto-Neg and forced
- * modes. When NIC operates with auto-neg the driver
- * will report Link speed & duplex modes as well as
- * link partner abilities. When forced link is used,
- * the driver will report status of the established
- * link.
- * Please read tlan.txt for additional information.
- * - Removed call to check_region(), and used
- * return value of request_region() instead.
- *
- * v1.8a May 28, 2000 - Minor updates.
- *
- * v1.9 July 25, 2000 - Fixed a few remaining Full-Duplex issues.
- * - Updated with timer fixes from Andrew Morton.
- * - Fixed module race in TLan_Open.
- * - Added routine to monitor PHY status.
- * - Added activity led support for Proliant devices.
- *
- * v1.10 Aug 30, 2000 - Added support for EISA based tlan controllers
- * like the Compaq NetFlex3/E.
- * - Rewrote tlan_probe to better handle multiple
- * bus probes. Probing and device setup is now
- * done through TLan_Probe and TLan_init_one. Actual
- * hardware probe is done with kernel API and
- * TLan_EisaProbe.
- * - Adjusted debug information for probing.
- * - Fixed bug that would cause general debug
- * information to be printed after driver removal.
- * - Added transmit timeout handling.
- * - Fixed OOM return values in tlan_probe.
- * - Fixed possible mem leak in tlan_exit
- * (now tlan_remove_one).
- * - Fixed timer bug in TLan_phyMonitor.
- * - This driver version is alpha quality, please
- * send me any bug issues you may encounter.
- *
- * v1.11 Aug 31, 2000 - Do not try to register irq 0 if no irq line was
- * set for EISA cards.
- * - Added support for NetFlex3/E with nibble-rate
- * 10Base-T PHY. This is untestet as I haven't got
- * one of these cards.
- * - Fixed timer being added twice.
- * - Disabled PhyMonitoring by default as this is
- * work in progress. Define MONITOR to enable it.
- * - Now we don't display link info with PHYs that
- * doesn't support it (level1).
- * - Incresed tx_timeout beacuse of auto-neg.
- * - Adjusted timers for forced speeds.
- *
- * v1.12 Oct 12, 2000 - Minor fixes (memleak, init, etc.)
- *
- * v1.13 Nov 28, 2000 - Stop flooding console with auto-neg issues
- * when link can't be established.
- * - Added the bbuf option as a kernel parameter.
- * - Fixed ioaddr probe bug.
- * - Fixed stupid deadlock with MII interrupts.
- * - Added support for speed/duplex selection with
- * multiple nics.
- * - Added partly fix for TX Channel lockup with
- * TLAN v1.0 silicon. This needs to be investigated
- * further.
- *
- * v1.14 Dec 16, 2000 - Added support for servicing multiple frames per.
- * interrupt. Thanks goes to
- * Adam Keys <adam@ti.com>
- * Denis Beaudoin <dbeaudoin@ti.com>
- * for providing the patch.
- * - Fixed auto-neg output when using multiple
- * adapters.
- * - Converted to use new taskq interface.
- *
- * v1.14a Jan 6, 2001 - Minor adjustments (spinlocks, etc.)
- *
- * Samuel Chessman <chessman@tux.org> New Maintainer!
- *
- * v1.15 Apr 4, 2002 - Correct operation when aui=1 to be
- * 10T half duplex no loopback
- * Thanks to Gunnar Eikman
- *
- * Sakari Ailus <sakari.ailus@iki.fi>:
- *
- * v1.15a Dec 15 2008 - Remove bbuf support, it doesn't work anyway.
- * v1.16 Jan 6 2011 - Make checkpatch.pl happy.
- * v1.17 Jan 6 2011 - Add suspend/resume support.
- *
******************************************************************************/
#include <linux/module.h>