struct sys_timer omap_timer;
-#ifdef CONFIG_OMAP_MPU_TIMER
-
/*
* ---------------------------------------------------------------------------
* MPU timer
return cycles_2_ns(ticks64);
}
-#endif /* CONFIG_OMAP_MPU_TIMER */
-
-#ifdef CONFIG_OMAP_32K_TIMER
-
-#ifdef CONFIG_ARCH_OMAP15XX
-#error OMAP 32KHz timer does not currently work on 15XX!
-#endif
-
-/*
- * ---------------------------------------------------------------------------
- * 32KHz OS timer
- *
- * This currently works only on 16xx, as 1510 does not have the continuous
- * 32KHz synchronous timer. The 32KHz synchronous timer is used to keep track
- * of time in addition to the 32KHz OS timer. Using only the 32KHz OS timer
- * on 1510 would be possible, but the timer would not be as accurate as
- * with the 32KHz synchronized timer.
- * ---------------------------------------------------------------------------
- */
-#define OMAP_32K_TIMER_BASE 0xfffb9000
-#define OMAP_32K_TIMER_CR 0x08
-#define OMAP_32K_TIMER_TVR 0x00
-#define OMAP_32K_TIMER_TCR 0x04
-
-#define OMAP_32K_TICKS_PER_HZ (32768 / HZ)
-
-/*
- * TRM says 1 / HZ = ( TVR + 1) / 32768, so TRV = (32768 / HZ) - 1
- * so with HZ = 100, TVR = 327.68.
- */
-#define OMAP_32K_TIMER_TICK_PERIOD ((32768 / HZ) - 1)
-#define TIMER_32K_SYNCHRONIZED 0xfffbc410
-
-#define JIFFIES_TO_HW_TICKS(nr_jiffies, clock_rate) \
- (((nr_jiffies) * (clock_rate)) / HZ)
-
-static inline void omap_32k_timer_write(int val, int reg)
-{
- omap_writew(val, reg + OMAP_32K_TIMER_BASE);
-}
-
-static inline unsigned long omap_32k_timer_read(int reg)
-{
- return omap_readl(reg + OMAP_32K_TIMER_BASE) & 0xffffff;
-}
-
-/*
- * The 32KHz synchronized timer is an additional timer on 16xx.
- * It is always running.
- */
-static inline unsigned long omap_32k_sync_timer_read(void)
-{
- return omap_readl(TIMER_32K_SYNCHRONIZED);
-}
-
-static inline void omap_32k_timer_start(unsigned long load_val)
-{
- omap_32k_timer_write(load_val, OMAP_32K_TIMER_TVR);
- omap_32k_timer_write(0x0f, OMAP_32K_TIMER_CR);
-}
-
-static inline void omap_32k_timer_stop(void)
-{
- omap_32k_timer_write(0x0, OMAP_32K_TIMER_CR);
-}
-
-/*
- * Rounds down to nearest usec. Note that this will overflow for larger values.
- */
-static inline unsigned long omap_32k_ticks_to_usecs(unsigned long ticks_32k)
-{
- return (ticks_32k * 5*5*5*5*5*5) >> 9;
-}
-
-/*
- * Rounds down to nearest nsec.
- */
-static inline unsigned long long
-omap_32k_ticks_to_nsecs(unsigned long ticks_32k)
-{
- return (unsigned long long) ticks_32k * 1000 * 5*5*5*5*5*5 >> 9;
-}
-
-static unsigned long omap_32k_last_tick = 0;
-
-/*
- * Returns elapsed usecs since last 32k timer interrupt
- */
-static unsigned long omap_32k_timer_gettimeoffset(void)
-{
- unsigned long now = omap_32k_sync_timer_read();
- return omap_32k_ticks_to_usecs(now - omap_32k_last_tick);
-}
-
-/*
- * Returns current time from boot in nsecs. It's OK for this to wrap
- * around for now, as it's just a relative time stamp.
- */
-unsigned long long sched_clock(void)
-{
- return omap_32k_ticks_to_nsecs(omap_32k_sync_timer_read());
-}
-
-/*
- * Timer interrupt for 32KHz timer. When dynamic tick is enabled, this
- * function is also called from other interrupts to remove latency
- * issues with dynamic tick. In the dynamic tick case, we need to lock
- * with irqsave.
- */
-static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id,
- struct pt_regs *regs)
-{
- unsigned long flags;
- unsigned long now;
-
- write_seqlock_irqsave(&xtime_lock, flags);
- now = omap_32k_sync_timer_read();
-
- while (now - omap_32k_last_tick >= OMAP_32K_TICKS_PER_HZ) {
- omap_32k_last_tick += OMAP_32K_TICKS_PER_HZ;
- timer_tick(regs);
- }
-
- /* Restart timer so we don't drift off due to modulo or dynamic tick.
- * By default we program the next timer to be continuous to avoid
- * latencies during high system load. During dynamic tick operation the
- * continuous timer can be overridden from pm_idle to be longer.
- */
- omap_32k_timer_start(omap_32k_last_tick + OMAP_32K_TICKS_PER_HZ - now);
- write_sequnlock_irqrestore(&xtime_lock, flags);
-
- return IRQ_HANDLED;
-}
-
-#ifdef CONFIG_NO_IDLE_HZ
-/*
- * Programs the next timer interrupt needed. Called when dynamic tick is
- * enabled, and to reprogram the ticks to skip from pm_idle. Note that
- * we can keep the timer continuous, and don't need to set it to run in
- * one-shot mode. This is because the timer will get reprogrammed again
- * after next interrupt.
- */
-void omap_32k_timer_reprogram(unsigned long next_tick)
-{
- omap_32k_timer_start(JIFFIES_TO_HW_TICKS(next_tick, 32768) + 1);
-}
-
-static struct irqaction omap_32k_timer_irq;
-extern struct timer_update_handler timer_update;
-
-static int omap_32k_timer_enable_dyn_tick(void)
-{
- /* No need to reprogram timer, just use the next interrupt */
- return 0;
-}
-
-static int omap_32k_timer_disable_dyn_tick(void)
-{
- omap_32k_timer_start(OMAP_32K_TIMER_TICK_PERIOD);
- return 0;
-}
-
-static struct dyn_tick_timer omap_dyn_tick_timer = {
- .enable = omap_32k_timer_enable_dyn_tick,
- .disable = omap_32k_timer_disable_dyn_tick,
- .reprogram = omap_32k_timer_reprogram,
- .handler = omap_32k_timer_interrupt,
-};
-#endif /* CONFIG_NO_IDLE_HZ */
-
-static struct irqaction omap_32k_timer_irq = {
- .name = "32KHz timer",
- .flags = SA_INTERRUPT | SA_TIMER,
- .handler = omap_32k_timer_interrupt,
-};
-
-static __init void omap_init_32k_timer(void)
-{
-
-#ifdef CONFIG_NO_IDLE_HZ
- omap_timer.dyn_tick = &omap_dyn_tick_timer;
-#endif
-
- setup_irq(INT_OS_TIMER, &omap_32k_timer_irq);
- omap_timer.offset = omap_32k_timer_gettimeoffset;
- omap_32k_last_tick = omap_32k_sync_timer_read();
- omap_32k_timer_start(OMAP_32K_TIMER_TICK_PERIOD);
-}
-#endif /* CONFIG_OMAP_32K_TIMER */
/*
* ---------------------------------------------------------------------------
*/
static void __init omap_timer_init(void)
{
-#if defined(CONFIG_OMAP_MPU_TIMER)
omap_init_mpu_timer();
-#elif defined(CONFIG_OMAP_32K_TIMER)
- omap_init_32k_timer();
-#else
-#error No system timer selected in Kconfig!
-#endif
}
struct sys_timer omap_timer = {
--- /dev/null
+/*
+ * linux/arch/arm/plat-omap/timer32k.c
+ *
+ * OMAP 32K Timer
+ *
+ * Copyright (C) 2004 - 2005 Nokia Corporation
+ * Partial timer rewrite and additional dynamic tick timer support by
+ * Tony Lindgen <tony@atomide.com> and
+ * Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ *
+ * MPU timer code based on the older MPU timer code for OMAP
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+
+#include <asm/system.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/leds.h>
+#include <asm/irq.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/time.h>
+
+struct sys_timer omap_timer;
+
+/*
+ * ---------------------------------------------------------------------------
+ * 32KHz OS timer
+ *
+ * This currently works only on 16xx, as 1510 does not have the continuous
+ * 32KHz synchronous timer. The 32KHz synchronous timer is used to keep track
+ * of time in addition to the 32KHz OS timer. Using only the 32KHz OS timer
+ * on 1510 would be possible, but the timer would not be as accurate as
+ * with the 32KHz synchronized timer.
+ * ---------------------------------------------------------------------------
+ */
+
+#if defined(CONFIG_ARCH_OMAP16XX)
+#define TIMER_32K_SYNCHRONIZED 0xfffbc410
+#elif defined(CONFIG_ARCH_OMAP24XX)
+#define TIMER_32K_SYNCHRONIZED 0x48004010
+#else
+#error OMAP 32KHz timer does not currently work on 15XX!
+#endif
+
+/* 16xx specific defines */
+#define OMAP1_32K_TIMER_BASE 0xfffb9000
+#define OMAP1_32K_TIMER_CR 0x08
+#define OMAP1_32K_TIMER_TVR 0x00
+#define OMAP1_32K_TIMER_TCR 0x04
+
+/* 24xx specific defines */
+#define OMAP2_GP_TIMER_BASE 0x48028000
+#define CM_CLKSEL_WKUP 0x48008440
+#define GP_TIMER_TIDR 0x00
+#define GP_TIMER_TISR 0x18
+#define GP_TIMER_TIER 0x1c
+#define GP_TIMER_TCLR 0x24
+#define GP_TIMER_TCRR 0x28
+#define GP_TIMER_TLDR 0x2c
+#define GP_TIMER_TTGR 0x30
+#define GP_TIMER_TSICR 0x40
+
+#define OMAP_32K_TICKS_PER_HZ (32768 / HZ)
+
+/*
+ * TRM says 1 / HZ = ( TVR + 1) / 32768, so TRV = (32768 / HZ) - 1
+ * so with HZ = 128, TVR = 255.
+ */
+#define OMAP_32K_TIMER_TICK_PERIOD ((32768 / HZ) - 1)
+
+#define JIFFIES_TO_HW_TICKS(nr_jiffies, clock_rate) \
+ (((nr_jiffies) * (clock_rate)) / HZ)
+
+static inline void omap_32k_timer_write(int val, int reg)
+{
+ if (cpu_class_is_omap1())
+ omap_writew(val, OMAP1_32K_TIMER_BASE + reg);
+
+ if (cpu_is_omap24xx())
+ omap_writel(val, OMAP2_GP_TIMER_BASE + reg);
+}
+
+static inline unsigned long omap_32k_timer_read(int reg)
+{
+ if (cpu_class_is_omap1())
+ return omap_readl(OMAP1_32K_TIMER_BASE + reg) & 0xffffff;
+
+ if (cpu_is_omap24xx())
+ return omap_readl(OMAP2_GP_TIMER_BASE + reg);
+}
+
+/*
+ * The 32KHz synchronized timer is an additional timer on 16xx.
+ * It is always running.
+ */
+static inline unsigned long omap_32k_sync_timer_read(void)
+{
+ return omap_readl(TIMER_32K_SYNCHRONIZED);
+}
+
+static inline void omap_32k_timer_start(unsigned long load_val)
+{
+ if (cpu_class_is_omap1()) {
+ omap_32k_timer_write(load_val, OMAP1_32K_TIMER_TVR);
+ omap_32k_timer_write(0x0f, OMAP1_32K_TIMER_CR);
+ }
+
+ if (cpu_is_omap24xx()) {
+ omap_32k_timer_write(0xffffffff - load_val, GP_TIMER_TCRR);
+ omap_32k_timer_write((1 << 1), GP_TIMER_TIER);
+ omap_32k_timer_write((1 << 1) | 1, GP_TIMER_TCLR);
+ }
+}
+
+static inline void omap_32k_timer_stop(void)
+{
+ if (cpu_class_is_omap1())
+ omap_32k_timer_write(0x0, OMAP1_32K_TIMER_CR);
+
+ if (cpu_is_omap24xx())
+ omap_32k_timer_write(0x0, GP_TIMER_TCLR);
+}
+
+/*
+ * Rounds down to nearest usec. Note that this will overflow for larger values.
+ */
+static inline unsigned long omap_32k_ticks_to_usecs(unsigned long ticks_32k)
+{
+ return (ticks_32k * 5*5*5*5*5*5) >> 9;
+}
+
+/*
+ * Rounds down to nearest nsec.
+ */
+static inline unsigned long long
+omap_32k_ticks_to_nsecs(unsigned long ticks_32k)
+{
+ return (unsigned long long) ticks_32k * 1000 * 5*5*5*5*5*5 >> 9;
+}
+
+static unsigned long omap_32k_last_tick = 0;
+
+/*
+ * Returns elapsed usecs since last 32k timer interrupt
+ */
+static unsigned long omap_32k_timer_gettimeoffset(void)
+{
+ unsigned long now = omap_32k_sync_timer_read();
+ return omap_32k_ticks_to_usecs(now - omap_32k_last_tick);
+}
+
+/*
+ * Returns current time from boot in nsecs. It's OK for this to wrap
+ * around for now, as it's just a relative time stamp.
+ */
+unsigned long long sched_clock(void)
+{
+ return omap_32k_ticks_to_nsecs(omap_32k_sync_timer_read());
+}
+
+/*
+ * Timer interrupt for 32KHz timer. When dynamic tick is enabled, this
+ * function is also called from other interrupts to remove latency
+ * issues with dynamic tick. In the dynamic tick case, we need to lock
+ * with irqsave.
+ */
+static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id,
+ struct pt_regs *regs)
+{
+ unsigned long flags;
+ unsigned long now;
+
+ write_seqlock_irqsave(&xtime_lock, flags);
+
+ if (cpu_is_omap24xx()) {
+ u32 status = omap_32k_timer_read(GP_TIMER_TISR);
+ omap_32k_timer_write(status, GP_TIMER_TISR);
+ }
+
+ now = omap_32k_sync_timer_read();
+
+ while (now - omap_32k_last_tick >= OMAP_32K_TICKS_PER_HZ) {
+ omap_32k_last_tick += OMAP_32K_TICKS_PER_HZ;
+ timer_tick(regs);
+ }
+
+ /* Restart timer so we don't drift off due to modulo or dynamic tick.
+ * By default we program the next timer to be continuous to avoid
+ * latencies during high system load. During dynamic tick operation the
+ * continuous timer can be overridden from pm_idle to be longer.
+ */
+ omap_32k_timer_start(omap_32k_last_tick + OMAP_32K_TICKS_PER_HZ - now);
+ write_sequnlock_irqrestore(&xtime_lock, flags);
+
+ return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_NO_IDLE_HZ
+/*
+ * Programs the next timer interrupt needed. Called when dynamic tick is
+ * enabled, and to reprogram the ticks to skip from pm_idle. Note that
+ * we can keep the timer continuous, and don't need to set it to run in
+ * one-shot mode. This is because the timer will get reprogrammed again
+ * after next interrupt.
+ */
+void omap_32k_timer_reprogram(unsigned long next_tick)
+{
+ omap_32k_timer_start(JIFFIES_TO_HW_TICKS(next_tick, 32768) + 1);
+}
+
+static struct irqaction omap_32k_timer_irq;
+extern struct timer_update_handler timer_update;
+
+static int omap_32k_timer_enable_dyn_tick(void)
+{
+ /* No need to reprogram timer, just use the next interrupt */
+ return 0;
+}
+
+static int omap_32k_timer_disable_dyn_tick(void)
+{
+ omap_32k_timer_start(OMAP_32K_TIMER_TICK_PERIOD);
+ return 0;
+}
+
+static struct dyn_tick_timer omap_dyn_tick_timer = {
+ .enable = omap_32k_timer_enable_dyn_tick,
+ .disable = omap_32k_timer_disable_dyn_tick,
+ .reprogram = omap_32k_timer_reprogram,
+ .handler = omap_32k_timer_interrupt,
+};
+#endif /* CONFIG_NO_IDLE_HZ */
+
+static struct irqaction omap_32k_timer_irq = {
+ .name = "32KHz timer",
+ .flags = SA_INTERRUPT | SA_TIMER,
+ .handler = omap_32k_timer_interrupt,
+};
+
+static struct clk * gpt1_ick;
+static struct clk * gpt1_fck;
+
+static __init void omap_init_32k_timer(void)
+{
+#ifdef CONFIG_NO_IDLE_HZ
+ omap_timer.dyn_tick = &omap_dyn_tick_timer;
+#endif
+
+ if (cpu_class_is_omap1())
+ setup_irq(INT_OS_TIMER, &omap_32k_timer_irq);
+ if (cpu_is_omap24xx())
+ setup_irq(37, &omap_32k_timer_irq);
+ omap_timer.offset = omap_32k_timer_gettimeoffset;
+ omap_32k_last_tick = omap_32k_sync_timer_read();
+
+ /* REVISIT: Check 24xx TIOCP_CFG settings after idle works */
+ if (cpu_is_omap24xx()) {
+ omap_32k_timer_write(0, GP_TIMER_TCLR);
+ omap_writel(0, CM_CLKSEL_WKUP); /* 32KHz clock source */
+
+ gpt1_ick = clk_get(NULL, "gpt1_ick");
+ if (IS_ERR(gpt1_ick))
+ printk(KERN_ERR "Could not get gpt1_ick\n");
+ else
+ clk_enable(gpt1_ick);
+
+ gpt1_fck = clk_get(NULL, "gpt1_fck");
+ if (IS_ERR(gpt1_fck))
+ printk(KERN_ERR "Could not get gpt1_fck\n");
+ else
+ clk_enable(gpt1_fck);
+
+ mdelay(100); /* Wait for clocks to stabilize */
+
+ omap_32k_timer_write(0x7, GP_TIMER_TISR);
+ }
+
+ omap_32k_timer_start(OMAP_32K_TIMER_TICK_PERIOD);
+}
+
+/*
+ * ---------------------------------------------------------------------------
+ * Timer initialization
+ * ---------------------------------------------------------------------------
+ */
+static void __init omap_timer_init(void)
+{
+ omap_init_32k_timer();
+}
+
+struct sys_timer omap_timer = {
+ .init = omap_timer_init,
+ .offset = NULL, /* Initialized later */
+};
projects / GitHub / LineageOS / android_kernel_samsung_universal7580.git / commitdiff