can: peak_canfd: fix firmware < v3.3.0: limit allocation to 32-bit DMA addr only
authorStephane Grosjean <s.grosjean@peak-system.com>
Thu, 21 Jun 2018 13:23:31 +0000 (15:23 +0200)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Sat, 28 Jul 2018 05:55:45 +0000 (07:55 +0200)
commit 5d4c94ed9f564224d7b37dbee13f7c5d4a8a01ac upstream.

The DMA logic in firmwares < v3.3.0 embedded in the PCAN-PCIe FD cards
family is not capable of handling a mix of 32-bit and 64-bit logical
addresses. If the board is equipped with 2 or 4 CAN ports, then such a
situation might lead to a PCIe Bus Error "Malformed TLP" packet
as well as "irq xx: nobody cared" issue.

This patch adds a workaround that requests only 32-bit DMA addresses
when these might be allocated outside of the 4 GB area.

This issue has been fixed in firmware v3.3.0 and next.

Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/net/can/peak_canfd/peak_pciefd_main.c

index 3c51a884db87bc90e71d5df8d5b0a91eadf69cdb..fa689854f16b310012f2240f2a9ed98486e809ff 100644 (file)
@@ -58,6 +58,10 @@ MODULE_LICENSE("GPL v2");
 #define PCIEFD_REG_SYS_VER1            0x0040  /* version reg #1 */
 #define PCIEFD_REG_SYS_VER2            0x0044  /* version reg #2 */
 
+#define PCIEFD_FW_VERSION(x, y, z)     (((u32)(x) << 24) | \
+                                        ((u32)(y) << 16) | \
+                                        ((u32)(z) << 8))
+
 /* System Control Registers Bits */
 #define PCIEFD_SYS_CTL_TS_RST          0x00000001      /* timestamp clock */
 #define PCIEFD_SYS_CTL_CLK_EN          0x00000002      /* system clock */
@@ -783,6 +787,21 @@ static int peak_pciefd_probe(struct pci_dev *pdev,
                 "%ux CAN-FD PCAN-PCIe FPGA v%u.%u.%u:\n", can_count,
                 hw_ver_major, hw_ver_minor, hw_ver_sub);
 
+#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
+       /* FW < v3.3.0 DMA logic doesn't handle correctly the mix of 32-bit and
+        * 64-bit logical addresses: this workaround forces usage of 32-bit
+        * DMA addresses only when such a fw is detected.
+        */
+       if (PCIEFD_FW_VERSION(hw_ver_major, hw_ver_minor, hw_ver_sub) <
+           PCIEFD_FW_VERSION(3, 3, 0)) {
+               err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+               if (err)
+                       dev_warn(&pdev->dev,
+                                "warning: can't set DMA mask %llxh (err %d)\n",
+                                DMA_BIT_MASK(32), err);
+       }
+#endif
+
        /* stop system clock */
        pciefd_sys_writereg(pciefd, PCIEFD_SYS_CTL_CLK_EN,
                            PCIEFD_REG_SYS_CTL_CLR);