--- /dev/null
+/******************************************************************************
+ *
+ * Copyright(c) 2003 - 2008 Intel Corporation. All rights reserved.
+ *
+ * Portions of this file are derived from the ipw3945 project, as well
+ * as portions of the ieee80211 subsystem header files.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * James P. Ketrenos <ipw2100-admin@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+
+#include <net/mac80211.h>
+#include "iwl-eeprom.h"
+#include "iwl-dev.h"
+#include "iwl-core.h"
+#include "iwl-sta.h"
+#include "iwl-io.h"
+#include "iwl-helpers.h"
+/************************** RX-FUNCTIONS ****************************/
+/*
+ * Rx theory of operation
+ *
+ * Driver allocates a circular buffer of Receive Buffer Descriptors (RBDs),
+ * each of which point to Receive Buffers to be filled by the NIC. These get
+ * used not only for Rx frames, but for any command response or notification
+ * from the NIC. The driver and NIC manage the Rx buffers by means
+ * of indexes into the circular buffer.
+ *
+ * Rx Queue Indexes
+ * The host/firmware share two index registers for managing the Rx buffers.
+ *
+ * The READ index maps to the first position that the firmware may be writing
+ * to -- the driver can read up to (but not including) this position and get
+ * good data.
+ * The READ index is managed by the firmware once the card is enabled.
+ *
+ * The WRITE index maps to the last position the driver has read from -- the
+ * position preceding WRITE is the last slot the firmware can place a packet.
+ *
+ * The queue is empty (no good data) if WRITE = READ - 1, and is full if
+ * WRITE = READ.
+ *
+ * During initialization, the host sets up the READ queue position to the first
+ * INDEX position, and WRITE to the last (READ - 1 wrapped)
+ *
+ * When the firmware places a packet in a buffer, it will advance the READ index
+ * and fire the RX interrupt. The driver can then query the READ index and
+ * process as many packets as possible, moving the WRITE index forward as it
+ * resets the Rx queue buffers with new memory.
+ *
+ * The management in the driver is as follows:
+ * + A list of pre-allocated SKBs is stored in iwl->rxq->rx_free. When
+ * iwl->rxq->free_count drops to or below RX_LOW_WATERMARK, work is scheduled
+ * to replenish the iwl->rxq->rx_free.
+ * + In iwl_rx_replenish (scheduled) if 'processed' != 'read' then the
+ * iwl->rxq is replenished and the READ INDEX is updated (updating the
+ * 'processed' and 'read' driver indexes as well)
+ * + A received packet is processed and handed to the kernel network stack,
+ * detached from the iwl->rxq. The driver 'processed' index is updated.
+ * + The Host/Firmware iwl->rxq is replenished at tasklet time from the rx_free
+ * list. If there are no allocated buffers in iwl->rxq->rx_free, the READ
+ * INDEX is not incremented and iwl->status(RX_STALLED) is set. If there
+ * were enough free buffers and RX_STALLED is set it is cleared.
+ *
+ *
+ * Driver sequence:
+ *
+ * iwl_rx_queue_alloc() Allocates rx_free
+ * iwl_rx_replenish() Replenishes rx_free list from rx_used, and calls
+ * iwl_rx_queue_restock
+ * iwl_rx_queue_restock() Moves available buffers from rx_free into Rx
+ * queue, updates firmware pointers, and updates
+ * the WRITE index. If insufficient rx_free buffers
+ * are available, schedules iwl_rx_replenish
+ *
+ * -- enable interrupts --
+ * ISR - iwl_rx() Detach iwl_rx_mem_buffers from pool up to the
+ * READ INDEX, detaching the SKB from the pool.
+ * Moves the packet buffer from queue to rx_used.
+ * Calls iwl_rx_queue_restock to refill any empty
+ * slots.
+ * ...
+ *
+ */
+
+/**
+ * iwl_rx_queue_space - Return number of free slots available in queue.
+ */
+int iwl_rx_queue_space(const struct iwl_rx_queue *q)
+{
+ int s = q->read - q->write;
+ if (s <= 0)
+ s += RX_QUEUE_SIZE;
+ /* keep some buffer to not confuse full and empty queue */
+ s -= 2;
+ if (s < 0)
+ s = 0;
+ return s;
+}
+EXPORT_SYMBOL(iwl_rx_queue_space);
+
+/**
+ * iwl_rx_queue_update_write_ptr - Update the write pointer for the RX queue
+ */
+int iwl_rx_queue_update_write_ptr(struct iwl_priv *priv, struct iwl_rx_queue *q)
+{
+ u32 reg = 0;
+ int ret = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&q->lock, flags);
+
+ if (q->need_update == 0)
+ goto exit_unlock;
+
+ /* If power-saving is in use, make sure device is awake */
+ if (test_bit(STATUS_POWER_PMI, &priv->status)) {
+ reg = iwl_read32(priv, CSR_UCODE_DRV_GP1);
+
+ if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) {
+ iwl_set_bit(priv, CSR_GP_CNTRL,
+ CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
+ goto exit_unlock;
+ }
+
+ ret = iwl_grab_nic_access(priv);
+ if (ret)
+ goto exit_unlock;
+
+ /* Device expects a multiple of 8 */
+ iwl_write_direct32(priv, FH_RSCSR_CHNL0_WPTR,
+ q->write & ~0x7);
+ iwl_release_nic_access(priv);
+
+ /* Else device is assumed to be awake */
+ } else
+ /* Device expects a multiple of 8 */
+ iwl_write32(priv, FH_RSCSR_CHNL0_WPTR, q->write & ~0x7);
+
+
+ q->need_update = 0;
+
+ exit_unlock:
+ spin_unlock_irqrestore(&q->lock, flags);
+ return ret;
+}
+EXPORT_SYMBOL(iwl_rx_queue_update_write_ptr);
+/**
+ * iwl_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr
+ */
+static inline __le32 iwl_dma_addr2rbd_ptr(struct iwl_priv *priv,
+ dma_addr_t dma_addr)
+{
+ return cpu_to_le32((u32)(dma_addr >> 8));
+}
+
+/**
+ * iwl_rx_queue_restock - refill RX queue from pre-allocated pool
+ *
+ * If there are slots in the RX queue that need to be restocked,
+ * and we have free pre-allocated buffers, fill the ranks as much
+ * as we can, pulling from rx_free.
+ *
+ * This moves the 'write' index forward to catch up with 'processed', and
+ * also updates the memory address in the firmware to reference the new
+ * target buffer.
+ */
+int iwl_rx_queue_restock(struct iwl_priv *priv)
+{
+ struct iwl_rx_queue *rxq = &priv->rxq;
+ struct list_head *element;
+ struct iwl_rx_mem_buffer *rxb;
+ unsigned long flags;
+ int write;
+ int ret = 0;
+
+ spin_lock_irqsave(&rxq->lock, flags);
+ write = rxq->write & ~0x7;
+ while ((iwl_rx_queue_space(rxq) > 0) && (rxq->free_count)) {
+ /* Get next free Rx buffer, remove from free list */
+ element = rxq->rx_free.next;
+ rxb = list_entry(element, struct iwl_rx_mem_buffer, list);
+ list_del(element);
+
+ /* Point to Rx buffer via next RBD in circular buffer */
+ rxq->bd[rxq->write] = iwl_dma_addr2rbd_ptr(priv, rxb->dma_addr);
+ rxq->queue[rxq->write] = rxb;
+ rxq->write = (rxq->write + 1) & RX_QUEUE_MASK;
+ rxq->free_count--;
+ }
+ spin_unlock_irqrestore(&rxq->lock, flags);
+ /* If the pre-allocated buffer pool is dropping low, schedule to
+ * refill it */
+ if (rxq->free_count <= RX_LOW_WATERMARK)
+ queue_work(priv->workqueue, &priv->rx_replenish);
+
+
+ /* If we've added more space for the firmware to place data, tell it.
+ * Increment device's write pointer in multiples of 8. */
+ if ((write != (rxq->write & ~0x7))
+ || (abs(rxq->write - rxq->read) > 7)) {
+ spin_lock_irqsave(&rxq->lock, flags);
+ rxq->need_update = 1;
+ spin_unlock_irqrestore(&rxq->lock, flags);
+ ret = iwl_rx_queue_update_write_ptr(priv, rxq);
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL(iwl_rx_queue_restock);
+
+
+/**
+ * iwl_rx_replenish - Move all used packet from rx_used to rx_free
+ *
+ * When moving to rx_free an SKB is allocated for the slot.
+ *
+ * Also restock the Rx queue via iwl_rx_queue_restock.
+ * This is called as a scheduled work item (except for during initialization)
+ */
+void iwl_rx_allocate(struct iwl_priv *priv)
+{
+ struct iwl_rx_queue *rxq = &priv->rxq;
+ struct list_head *element;
+ struct iwl_rx_mem_buffer *rxb;
+ unsigned long flags;
+ spin_lock_irqsave(&rxq->lock, flags);
+ while (!list_empty(&rxq->rx_used)) {
+ element = rxq->rx_used.next;
+ rxb = list_entry(element, struct iwl_rx_mem_buffer, list);
+
+ /* Alloc a new receive buffer */
+ rxb->skb = alloc_skb(priv->hw_params.rx_buf_size,
+ __GFP_NOWARN | GFP_ATOMIC);
+ if (!rxb->skb) {
+ if (net_ratelimit())
+ printk(KERN_CRIT DRV_NAME
+ ": Can not allocate SKB buffers\n");
+ /* We don't reschedule replenish work here -- we will
+ * call the restock method and if it still needs
+ * more buffers it will schedule replenish */
+ break;
+ }
+ priv->alloc_rxb_skb++;
+ list_del(element);
+
+ /* Get physical address of RB/SKB */
+ rxb->dma_addr =
+ pci_map_single(priv->pci_dev, rxb->skb->data,
+ priv->hw_params.rx_buf_size, PCI_DMA_FROMDEVICE);
+ list_add_tail(&rxb->list, &rxq->rx_free);
+ rxq->free_count++;
+ }
+ spin_unlock_irqrestore(&rxq->lock, flags);
+}
+EXPORT_SYMBOL(iwl_rx_allocate);
+
+void iwl_rx_replenish(struct iwl_priv *priv)
+{
+ unsigned long flags;
+
+ iwl_rx_allocate(priv);
+
+ spin_lock_irqsave(&priv->lock, flags);
+ iwl_rx_queue_restock(priv);
+ spin_unlock_irqrestore(&priv->lock, flags);
+}
+EXPORT_SYMBOL(iwl_rx_replenish);
+
+
+/* Assumes that the skb field of the buffers in 'pool' is kept accurate.
+ * If an SKB has been detached, the POOL needs to have its SKB set to NULL
+ * This free routine walks the list of POOL entries and if SKB is set to
+ * non NULL it is unmapped and freed
+ */
+void iwl_rx_queue_free(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
+{
+ int i;
+ for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) {
+ if (rxq->pool[i].skb != NULL) {
+ pci_unmap_single(priv->pci_dev,
+ rxq->pool[i].dma_addr,
+ priv->hw_params.rx_buf_size,
+ PCI_DMA_FROMDEVICE);
+ dev_kfree_skb(rxq->pool[i].skb);
+ }
+ }
+
+ pci_free_consistent(priv->pci_dev, 4 * RX_QUEUE_SIZE, rxq->bd,
+ rxq->dma_addr);
+ rxq->bd = NULL;
+}
+EXPORT_SYMBOL(iwl_rx_queue_free);
+
+int iwl_rx_queue_alloc(struct iwl_priv *priv)
+{
+ struct iwl_rx_queue *rxq = &priv->rxq;
+ struct pci_dev *dev = priv->pci_dev;
+ int i;
+
+ spin_lock_init(&rxq->lock);
+ INIT_LIST_HEAD(&rxq->rx_free);
+ INIT_LIST_HEAD(&rxq->rx_used);
+
+ /* Alloc the circular buffer of Read Buffer Descriptors (RBDs) */
+ rxq->bd = pci_alloc_consistent(dev, 4 * RX_QUEUE_SIZE, &rxq->dma_addr);
+ if (!rxq->bd)
+ return -ENOMEM;
+
+ /* Fill the rx_used queue with _all_ of the Rx buffers */
+ for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++)
+ list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
+
+ /* Set us so that we have processed and used all buffers, but have
+ * not restocked the Rx queue with fresh buffers */
+ rxq->read = rxq->write = 0;
+ rxq->free_count = 0;
+ rxq->need_update = 0;
+ return 0;
+}
+EXPORT_SYMBOL(iwl_rx_queue_alloc);
+
+void iwl_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
+{
+ unsigned long flags;
+ int i;
+ spin_lock_irqsave(&rxq->lock, flags);
+ INIT_LIST_HEAD(&rxq->rx_free);
+ INIT_LIST_HEAD(&rxq->rx_used);
+ /* Fill the rx_used queue with _all_ of the Rx buffers */
+ for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) {
+ /* In the reset function, these buffers may have been allocated
+ * to an SKB, so we need to unmap and free potential storage */
+ if (rxq->pool[i].skb != NULL) {
+ pci_unmap_single(priv->pci_dev,
+ rxq->pool[i].dma_addr,
+ priv->hw_params.rx_buf_size,
+ PCI_DMA_FROMDEVICE);
+ priv->alloc_rxb_skb--;
+ dev_kfree_skb(rxq->pool[i].skb);
+ rxq->pool[i].skb = NULL;
+ }
+ list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
+ }
+
+ /* Set us so that we have processed and used all buffers, but have
+ * not restocked the Rx queue with fresh buffers */
+ rxq->read = rxq->write = 0;
+ rxq->free_count = 0;
+ spin_unlock_irqrestore(&rxq->lock, flags);
+}
+EXPORT_SYMBOL(iwl_rx_queue_reset);
+
* iwl4965_rx_reply_tx - Handle standard (non-aggregation) Tx response
*/
static void iwl4965_rx_reply_tx(struct iwl_priv *priv,
- struct iwl4965_rx_mem_buffer *rxb)
+ struct iwl_rx_mem_buffer *rxb)
{
struct iwl4965_rx_packet *pkt = (void *)rxb->skb->data;
u16 sequence = le16_to_cpu(pkt->hdr.sequence);
static void iwl4965_rx_reply_alive(struct iwl_priv *priv,
- struct iwl4965_rx_mem_buffer *rxb)
+ struct iwl_rx_mem_buffer *rxb)
{
struct iwl4965_rx_packet *pkt = (void *)rxb->skb->data;
struct iwl4965_alive_resp *palive;
}
static void iwl4965_rx_reply_add_sta(struct iwl_priv *priv,
- struct iwl4965_rx_mem_buffer *rxb)
+ struct iwl_rx_mem_buffer *rxb)
{
struct iwl4965_rx_packet *pkt = (void *)rxb->skb->data;
}
static void iwl4965_rx_reply_error(struct iwl_priv *priv,
- struct iwl4965_rx_mem_buffer *rxb)
+ struct iwl_rx_mem_buffer *rxb)
{
struct iwl4965_rx_packet *pkt = (void *)rxb->skb->data;
#define TX_STATUS_ENTRY(x) case TX_STATUS_FAIL_ ## x: return #x
-static void iwl4965_rx_csa(struct iwl_priv *priv, struct iwl4965_rx_mem_buffer *rxb)
+static void iwl4965_rx_csa(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb)
{
struct iwl4965_rx_packet *pkt = (void *)rxb->skb->data;
struct iwl4965_rxon_cmd *rxon = (void *)&priv->active_rxon;
}
static void iwl4965_rx_spectrum_measure_notif(struct iwl_priv *priv,
- struct iwl4965_rx_mem_buffer *rxb)
+ struct iwl_rx_mem_buffer *rxb)
{
#ifdef CONFIG_IWL4965_SPECTRUM_MEASUREMENT
struct iwl4965_rx_packet *pkt = (void *)rxb->skb->data;
}
static void iwl4965_rx_pm_sleep_notif(struct iwl_priv *priv,
- struct iwl4965_rx_mem_buffer *rxb)
+ struct iwl_rx_mem_buffer *rxb)
{
#ifdef CONFIG_IWLWIFI_DEBUG
struct iwl4965_rx_packet *pkt = (void *)rxb->skb->data;
}
static void iwl4965_rx_pm_debug_statistics_notif(struct iwl_priv *priv,
- struct iwl4965_rx_mem_buffer *rxb)
+ struct iwl_rx_mem_buffer *rxb)
{
struct iwl4965_rx_packet *pkt = (void *)rxb->skb->data;
IWL_DEBUG_RADIO("Dumping %d bytes of unhandled "
}
static void iwl4965_rx_beacon_notif(struct iwl_priv *priv,
- struct iwl4965_rx_mem_buffer *rxb)
+ struct iwl_rx_mem_buffer *rxb)
{
#ifdef CONFIG_IWLWIFI_DEBUG
struct iwl4965_rx_packet *pkt = (void *)rxb->skb->data;
/* Service response to REPLY_SCAN_CMD (0x80) */
static void iwl4965_rx_reply_scan(struct iwl_priv *priv,
- struct iwl4965_rx_mem_buffer *rxb)
+ struct iwl_rx_mem_buffer *rxb)
{
#ifdef CONFIG_IWLWIFI_DEBUG
struct iwl4965_rx_packet *pkt = (void *)rxb->skb->data;
/* Service SCAN_START_NOTIFICATION (0x82) */
static void iwl4965_rx_scan_start_notif(struct iwl_priv *priv,
- struct iwl4965_rx_mem_buffer *rxb)
+ struct iwl_rx_mem_buffer *rxb)
{
struct iwl4965_rx_packet *pkt = (void *)rxb->skb->data;
struct iwl4965_scanstart_notification *notif =
/* Service SCAN_RESULTS_NOTIFICATION (0x83) */
static void iwl4965_rx_scan_results_notif(struct iwl_priv *priv,
- struct iwl4965_rx_mem_buffer *rxb)
+ struct iwl_rx_mem_buffer *rxb)
{
struct iwl4965_rx_packet *pkt = (void *)rxb->skb->data;
struct iwl4965_scanresults_notification *notif =
/* Service SCAN_COMPLETE_NOTIFICATION (0x84) */
static void iwl4965_rx_scan_complete_notif(struct iwl_priv *priv,
- struct iwl4965_rx_mem_buffer *rxb)
+ struct iwl_rx_mem_buffer *rxb)
{
struct iwl4965_rx_packet *pkt = (void *)rxb->skb->data;
struct iwl4965_scancomplete_notification *scan_notif = (void *)pkt->u.raw;
/* Handle notification from uCode that card's power state is changing
* due to software, hardware, or critical temperature RFKILL */
static void iwl4965_rx_card_state_notif(struct iwl_priv *priv,
- struct iwl4965_rx_mem_buffer *rxb)
+ struct iwl_rx_mem_buffer *rxb)
{
struct iwl4965_rx_packet *pkt = (void *)rxb->skb->data;
u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags);
* if the callback returns 1
*/
static void iwl4965_tx_cmd_complete(struct iwl_priv *priv,
- struct iwl4965_rx_mem_buffer *rxb)
+ struct iwl_rx_mem_buffer *rxb)
{
struct iwl4965_rx_packet *pkt = (struct iwl4965_rx_packet *)rxb->skb->data;
u16 sequence = le16_to_cpu(pkt->hdr.sequence);
}
}
-/************************** RX-FUNCTIONS ****************************/
-/*
- * Rx theory of operation
- *
- * Driver allocates a circular buffer of Receive Buffer Descriptors (RBDs),
- * each of which point to Receive Buffers to be filled by 4965. These get
- * used not only for Rx frames, but for any command response or notification
- * from the 4965. The driver and 4965 manage the Rx buffers by means
- * of indexes into the circular buffer.
- *
- * Rx Queue Indexes
- * The host/firmware share two index registers for managing the Rx buffers.
- *
- * The READ index maps to the first position that the firmware may be writing
- * to -- the driver can read up to (but not including) this position and get
- * good data.
- * The READ index is managed by the firmware once the card is enabled.
- *
- * The WRITE index maps to the last position the driver has read from -- the
- * position preceding WRITE is the last slot the firmware can place a packet.
- *
- * The queue is empty (no good data) if WRITE = READ - 1, and is full if
- * WRITE = READ.
- *
- * During initialization, the host sets up the READ queue position to the first
- * INDEX position, and WRITE to the last (READ - 1 wrapped)
- *
- * When the firmware places a packet in a buffer, it will advance the READ index
- * and fire the RX interrupt. The driver can then query the READ index and
- * process as many packets as possible, moving the WRITE index forward as it
- * resets the Rx queue buffers with new memory.
- *
- * The management in the driver is as follows:
- * + A list of pre-allocated SKBs is stored in iwl->rxq->rx_free. When
- * iwl->rxq->free_count drops to or below RX_LOW_WATERMARK, work is scheduled
- * to replenish the iwl->rxq->rx_free.
- * + In iwl4965_rx_replenish (scheduled) if 'processed' != 'read' then the
- * iwl->rxq is replenished and the READ INDEX is updated (updating the
- * 'processed' and 'read' driver indexes as well)
- * + A received packet is processed and handed to the kernel network stack,
- * detached from the iwl->rxq. The driver 'processed' index is updated.
- * + The Host/Firmware iwl->rxq is replenished at tasklet time from the rx_free
- * list. If there are no allocated buffers in iwl->rxq->rx_free, the READ
- * INDEX is not incremented and iwl->status(RX_STALLED) is set. If there
- * were enough free buffers and RX_STALLED is set it is cleared.
- *
- *
- * Driver sequence:
- *
- * iwl4965_rx_queue_alloc() Allocates rx_free
- * iwl4965_rx_replenish() Replenishes rx_free list from rx_used, and calls
- * iwl4965_rx_queue_restock
- * iwl4965_rx_queue_restock() Moves available buffers from rx_free into Rx
- * queue, updates firmware pointers, and updates
- * the WRITE index. If insufficient rx_free buffers
- * are available, schedules iwl4965_rx_replenish
- *
- * -- enable interrupts --
- * ISR - iwl4965_rx() Detach iwl4965_rx_mem_buffers from pool up to the
- * READ INDEX, detaching the SKB from the pool.
- * Moves the packet buffer from queue to rx_used.
- * Calls iwl4965_rx_queue_restock to refill any empty
- * slots.
- * ...
- *
- */
-
-/**
- * iwl4965_rx_queue_space - Return number of free slots available in queue.
- */
-static int iwl4965_rx_queue_space(const struct iwl4965_rx_queue *q)
-{
- int s = q->read - q->write;
- if (s <= 0)
- s += RX_QUEUE_SIZE;
- /* keep some buffer to not confuse full and empty queue */
- s -= 2;
- if (s < 0)
- s = 0;
- return s;
-}
-
-/**
- * iwl4965_rx_queue_update_write_ptr - Update the write pointer for the RX queue
- */
-int iwl4965_rx_queue_update_write_ptr(struct iwl_priv *priv, struct iwl4965_rx_queue *q)
-{
- u32 reg = 0;
- int rc = 0;
- unsigned long flags;
-
- spin_lock_irqsave(&q->lock, flags);
-
- if (q->need_update == 0)
- goto exit_unlock;
-
- /* If power-saving is in use, make sure device is awake */
- if (test_bit(STATUS_POWER_PMI, &priv->status)) {
- reg = iwl_read32(priv, CSR_UCODE_DRV_GP1);
-
- if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) {
- iwl_set_bit(priv, CSR_GP_CNTRL,
- CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
- goto exit_unlock;
- }
-
- rc = iwl_grab_nic_access(priv);
- if (rc)
- goto exit_unlock;
-
- /* Device expects a multiple of 8 */
- iwl_write_direct32(priv, FH_RSCSR_CHNL0_WPTR,
- q->write & ~0x7);
- iwl_release_nic_access(priv);
-
- /* Else device is assumed to be awake */
- } else
- /* Device expects a multiple of 8 */
- iwl_write32(priv, FH_RSCSR_CHNL0_WPTR, q->write & ~0x7);
-
-
- q->need_update = 0;
-
- exit_unlock:
- spin_unlock_irqrestore(&q->lock, flags);
- return rc;
-}
-
-/**
- * iwl4965_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr
- */
-static inline __le32 iwl4965_dma_addr2rbd_ptr(struct iwl_priv *priv,
- dma_addr_t dma_addr)
-{
- return cpu_to_le32((u32)(dma_addr >> 8));
-}
-
-
-/**
- * iwl4965_rx_queue_restock - refill RX queue from pre-allocated pool
- *
- * If there are slots in the RX queue that need to be restocked,
- * and we have free pre-allocated buffers, fill the ranks as much
- * as we can, pulling from rx_free.
- *
- * This moves the 'write' index forward to catch up with 'processed', and
- * also updates the memory address in the firmware to reference the new
- * target buffer.
- */
-static int iwl4965_rx_queue_restock(struct iwl_priv *priv)
-{
- struct iwl4965_rx_queue *rxq = &priv->rxq;
- struct list_head *element;
- struct iwl4965_rx_mem_buffer *rxb;
- unsigned long flags;
- int write, rc;
-
- spin_lock_irqsave(&rxq->lock, flags);
- write = rxq->write & ~0x7;
- while ((iwl4965_rx_queue_space(rxq) > 0) && (rxq->free_count)) {
- /* Get next free Rx buffer, remove from free list */
- element = rxq->rx_free.next;
- rxb = list_entry(element, struct iwl4965_rx_mem_buffer, list);
- list_del(element);
-
- /* Point to Rx buffer via next RBD in circular buffer */
- rxq->bd[rxq->write] = iwl4965_dma_addr2rbd_ptr(priv, rxb->dma_addr);
- rxq->queue[rxq->write] = rxb;
- rxq->write = (rxq->write + 1) & RX_QUEUE_MASK;
- rxq->free_count--;
- }
- spin_unlock_irqrestore(&rxq->lock, flags);
- /* If the pre-allocated buffer pool is dropping low, schedule to
- * refill it */
- if (rxq->free_count <= RX_LOW_WATERMARK)
- queue_work(priv->workqueue, &priv->rx_replenish);
-
-
- /* If we've added more space for the firmware to place data, tell it.
- * Increment device's write pointer in multiples of 8. */
- if ((write != (rxq->write & ~0x7))
- || (abs(rxq->write - rxq->read) > 7)) {
- spin_lock_irqsave(&rxq->lock, flags);
- rxq->need_update = 1;
- spin_unlock_irqrestore(&rxq->lock, flags);
- rc = iwl4965_rx_queue_update_write_ptr(priv, rxq);
- if (rc)
- return rc;
- }
-
- return 0;
-}
-
-/**
- * iwl4965_rx_replenish - Move all used packet from rx_used to rx_free
- *
- * When moving to rx_free an SKB is allocated for the slot.
- *
- * Also restock the Rx queue via iwl4965_rx_queue_restock.
- * This is called as a scheduled work item (except for during initialization)
- */
-static void iwl4965_rx_allocate(struct iwl_priv *priv)
-{
- struct iwl4965_rx_queue *rxq = &priv->rxq;
- struct list_head *element;
- struct iwl4965_rx_mem_buffer *rxb;
- unsigned long flags;
- spin_lock_irqsave(&rxq->lock, flags);
- while (!list_empty(&rxq->rx_used)) {
- element = rxq->rx_used.next;
- rxb = list_entry(element, struct iwl4965_rx_mem_buffer, list);
-
- /* Alloc a new receive buffer */
- rxb->skb =
- alloc_skb(priv->hw_params.rx_buf_size,
- __GFP_NOWARN | GFP_ATOMIC);
- if (!rxb->skb) {
- if (net_ratelimit())
- printk(KERN_CRIT DRV_NAME
- ": Can not allocate SKB buffers\n");
- /* We don't reschedule replenish work here -- we will
- * call the restock method and if it still needs
- * more buffers it will schedule replenish */
- break;
- }
- priv->alloc_rxb_skb++;
- list_del(element);
-
- /* Get physical address of RB/SKB */
- rxb->dma_addr =
- pci_map_single(priv->pci_dev, rxb->skb->data,
- priv->hw_params.rx_buf_size, PCI_DMA_FROMDEVICE);
- list_add_tail(&rxb->list, &rxq->rx_free);
- rxq->free_count++;
- }
- spin_unlock_irqrestore(&rxq->lock, flags);
-}
-
/*
* this should be called while priv->lock is locked
*/
-static void __iwl4965_rx_replenish(void *data)
-{
- struct iwl_priv *priv = data;
-
- iwl4965_rx_allocate(priv);
- iwl4965_rx_queue_restock(priv);
-}
-
-
-void iwl4965_rx_replenish(void *data)
-{
- struct iwl_priv *priv = data;
- unsigned long flags;
-
- iwl4965_rx_allocate(priv);
-
- spin_lock_irqsave(&priv->lock, flags);
- iwl4965_rx_queue_restock(priv);
- spin_unlock_irqrestore(&priv->lock, flags);
-}
-
-/* Assumes that the skb field of the buffers in 'pool' is kept accurate.
- * If an SKB has been detached, the POOL needs to have its SKB set to NULL
- * This free routine walks the list of POOL entries and if SKB is set to
- * non NULL it is unmapped and freed
- */
-static void iwl4965_rx_queue_free(struct iwl_priv *priv, struct iwl4965_rx_queue *rxq)
-{
- int i;
- for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) {
- if (rxq->pool[i].skb != NULL) {
- pci_unmap_single(priv->pci_dev,
- rxq->pool[i].dma_addr,
- priv->hw_params.rx_buf_size,
- PCI_DMA_FROMDEVICE);
- dev_kfree_skb(rxq->pool[i].skb);
- }
- }
-
- pci_free_consistent(priv->pci_dev, 4 * RX_QUEUE_SIZE, rxq->bd,
- rxq->dma_addr);
- rxq->bd = NULL;
-}
-
-int iwl4965_rx_queue_alloc(struct iwl_priv *priv)
-{
- struct iwl4965_rx_queue *rxq = &priv->rxq;
- struct pci_dev *dev = priv->pci_dev;
- int i;
-
- spin_lock_init(&rxq->lock);
- INIT_LIST_HEAD(&rxq->rx_free);
- INIT_LIST_HEAD(&rxq->rx_used);
-
- /* Alloc the circular buffer of Read Buffer Descriptors (RBDs) */
- rxq->bd = pci_alloc_consistent(dev, 4 * RX_QUEUE_SIZE, &rxq->dma_addr);
- if (!rxq->bd)
- return -ENOMEM;
-
- /* Fill the rx_used queue with _all_ of the Rx buffers */
- for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++)
- list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
-
- /* Set us so that we have processed and used all buffers, but have
- * not restocked the Rx queue with fresh buffers */
- rxq->read = rxq->write = 0;
- rxq->free_count = 0;
- rxq->need_update = 0;
- return 0;
-}
-
-void iwl4965_rx_queue_reset(struct iwl_priv *priv, struct iwl4965_rx_queue *rxq)
-{
- unsigned long flags;
- int i;
- spin_lock_irqsave(&rxq->lock, flags);
- INIT_LIST_HEAD(&rxq->rx_free);
- INIT_LIST_HEAD(&rxq->rx_used);
- /* Fill the rx_used queue with _all_ of the Rx buffers */
- for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) {
- /* In the reset function, these buffers may have been allocated
- * to an SKB, so we need to unmap and free potential storage */
- if (rxq->pool[i].skb != NULL) {
- pci_unmap_single(priv->pci_dev,
- rxq->pool[i].dma_addr,
- priv->hw_params.rx_buf_size,
- PCI_DMA_FROMDEVICE);
- priv->alloc_rxb_skb--;
- dev_kfree_skb(rxq->pool[i].skb);
- rxq->pool[i].skb = NULL;
- }
- list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
- }
-
- /* Set us so that we have processed and used all buffers, but have
- * not restocked the Rx queue with fresh buffers */
- rxq->read = rxq->write = 0;
- rxq->free_count = 0;
- spin_unlock_irqrestore(&rxq->lock, flags);
-}
-
-/* Convert linear signal-to-noise ratio into dB */
-static u8 ratio2dB[100] = {
-/* 0 1 2 3 4 5 6 7 8 9 */
- 0, 0, 6, 10, 12, 14, 16, 17, 18, 19, /* 00 - 09 */
- 20, 21, 22, 22, 23, 23, 24, 25, 26, 26, /* 10 - 19 */
- 26, 26, 26, 27, 27, 28, 28, 28, 29, 29, /* 20 - 29 */
- 29, 30, 30, 30, 31, 31, 31, 31, 32, 32, /* 30 - 39 */
- 32, 32, 32, 33, 33, 33, 33, 33, 34, 34, /* 40 - 49 */
- 34, 34, 34, 34, 35, 35, 35, 35, 35, 35, /* 50 - 59 */
- 36, 36, 36, 36, 36, 36, 36, 37, 37, 37, /* 60 - 69 */
- 37, 37, 37, 37, 37, 38, 38, 38, 38, 38, /* 70 - 79 */
- 38, 38, 38, 38, 38, 39, 39, 39, 39, 39, /* 80 - 89 */
- 39, 39, 39, 39, 39, 40, 40, 40, 40, 40 /* 90 - 99 */
-};
-
-/* Calculates a relative dB value from a ratio of linear
- * (i.e. not dB) signal levels.
- * Conversion assumes that levels are voltages (20*log), not powers (10*log). */
-int iwl4965_calc_db_from_ratio(int sig_ratio)
+static void __iwl_rx_replenish(struct iwl_priv *priv)
{
- /* 1000:1 or higher just report as 60 dB */
- if (sig_ratio >= 1000)
- return 60;
-
- /* 100:1 or higher, divide by 10 and use table,
- * add 20 dB to make up for divide by 10 */
- if (sig_ratio >= 100)
- return (20 + (int)ratio2dB[sig_ratio/10]);
-
- /* We shouldn't see this */
- if (sig_ratio < 1)
- return 0;
-
- /* Use table for ratios 1:1 - 99:1 */
- return (int)ratio2dB[sig_ratio];
+ iwl_rx_allocate(priv);
+ iwl_rx_queue_restock(priv);
}
-#define PERFECT_RSSI (-20) /* dBm */
-#define WORST_RSSI (-95) /* dBm */
-#define RSSI_RANGE (PERFECT_RSSI - WORST_RSSI)
-
-/* Calculate an indication of rx signal quality (a percentage, not dBm!).
- * See http://www.ces.clemson.edu/linux/signal_quality.shtml for info
- * about formulas used below. */
-int iwl4965_calc_sig_qual(int rssi_dbm, int noise_dbm)
-{
- int sig_qual;
- int degradation = PERFECT_RSSI - rssi_dbm;
-
- /* If we get a noise measurement, use signal-to-noise ratio (SNR)
- * as indicator; formula is (signal dbm - noise dbm).
- * SNR at or above 40 is a great signal (100%).
- * Below that, scale to fit SNR of 0 - 40 dB within 0 - 100% indicator.
- * Weakest usable signal is usually 10 - 15 dB SNR. */
- if (noise_dbm) {
- if (rssi_dbm - noise_dbm >= 40)
- return 100;
- else if (rssi_dbm < noise_dbm)
- return 0;
- sig_qual = ((rssi_dbm - noise_dbm) * 5) / 2;
-
- /* Else use just the signal level.
- * This formula is a least squares fit of data points collected and
- * compared with a reference system that had a percentage (%) display
- * for signal quality. */
- } else
- sig_qual = (100 * (RSSI_RANGE * RSSI_RANGE) - degradation *
- (15 * RSSI_RANGE + 62 * degradation)) /
- (RSSI_RANGE * RSSI_RANGE);
-
- if (sig_qual > 100)
- sig_qual = 100;
- else if (sig_qual < 1)
- sig_qual = 0;
-
- return sig_qual;
-}
/**
- * iwl4965_rx_handle - Main entry function for receiving responses from uCode
+ * iwl_rx_handle - Main entry function for receiving responses from uCode
*
* Uses the priv->rx_handlers callback function array to invoke
* the appropriate handlers, including command responses,
* frame-received notifications, and other notifications.
*/
-static void iwl4965_rx_handle(struct iwl_priv *priv)
+void iwl_rx_handle(struct iwl_priv *priv)
{
- struct iwl4965_rx_mem_buffer *rxb;
+ struct iwl_rx_mem_buffer *rxb;
struct iwl4965_rx_packet *pkt;
- struct iwl4965_rx_queue *rxq = &priv->rxq;
+ struct iwl_rx_queue *rxq = &priv->rxq;
u32 r, i;
int reclaim;
unsigned long flags;
if (i == r)
IWL_DEBUG(IWL_DL_RX | IWL_DL_ISR, "r = %d, i = %d\n", r, i);
- if (iwl4965_rx_queue_space(rxq) > (RX_QUEUE_SIZE / 2))
+ if (iwl_rx_queue_space(rxq) > (RX_QUEUE_SIZE / 2))
fill_rx = 1;
while (i != r) {
count++;
if (count >= 8) {
priv->rxq.read = i;
- __iwl4965_rx_replenish(priv);
+ __iwl_rx_replenish(priv);
count = 0;
}
}
/* Backtrack one entry */
priv->rxq.read = i;
- iwl4965_rx_queue_restock(priv);
+ iwl_rx_queue_restock(priv);
+}
+/* Convert linear signal-to-noise ratio into dB */
+static u8 ratio2dB[100] = {
+/* 0 1 2 3 4 5 6 7 8 9 */
+ 0, 0, 6, 10, 12, 14, 16, 17, 18, 19, /* 00 - 09 */
+ 20, 21, 22, 22, 23, 23, 24, 25, 26, 26, /* 10 - 19 */
+ 26, 26, 26, 27, 27, 28, 28, 28, 29, 29, /* 20 - 29 */
+ 29, 30, 30, 30, 31, 31, 31, 31, 32, 32, /* 30 - 39 */
+ 32, 32, 32, 33, 33, 33, 33, 33, 34, 34, /* 40 - 49 */
+ 34, 34, 34, 34, 35, 35, 35, 35, 35, 35, /* 50 - 59 */
+ 36, 36, 36, 36, 36, 36, 36, 37, 37, 37, /* 60 - 69 */
+ 37, 37, 37, 37, 37, 38, 38, 38, 38, 38, /* 70 - 79 */
+ 38, 38, 38, 38, 38, 39, 39, 39, 39, 39, /* 80 - 89 */
+ 39, 39, 39, 39, 39, 40, 40, 40, 40, 40 /* 90 - 99 */
+};
+
+/* Calculates a relative dB value from a ratio of linear
+ * (i.e. not dB) signal levels.
+ * Conversion assumes that levels are voltages (20*log), not powers (10*log). */
+int iwl4965_calc_db_from_ratio(int sig_ratio)
+{
+ /* 1000:1 or higher just report as 60 dB */
+ if (sig_ratio >= 1000)
+ return 60;
+
+ /* 100:1 or higher, divide by 10 and use table,
+ * add 20 dB to make up for divide by 10 */
+ if (sig_ratio >= 100)
+ return (20 + (int)ratio2dB[sig_ratio/10]);
+
+ /* We shouldn't see this */
+ if (sig_ratio < 1)
+ return 0;
+
+ /* Use table for ratios 1:1 - 99:1 */
+ return (int)ratio2dB[sig_ratio];
+}
+
+#define PERFECT_RSSI (-20) /* dBm */
+#define WORST_RSSI (-95) /* dBm */
+#define RSSI_RANGE (PERFECT_RSSI - WORST_RSSI)
+
+/* Calculate an indication of rx signal quality (a percentage, not dBm!).
+ * See http://www.ces.clemson.edu/linux/signal_quality.shtml for info
+ * about formulas used below. */
+int iwl4965_calc_sig_qual(int rssi_dbm, int noise_dbm)
+{
+ int sig_qual;
+ int degradation = PERFECT_RSSI - rssi_dbm;
+
+ /* If we get a noise measurement, use signal-to-noise ratio (SNR)
+ * as indicator; formula is (signal dbm - noise dbm).
+ * SNR at or above 40 is a great signal (100%).
+ * Below that, scale to fit SNR of 0 - 40 dB within 0 - 100% indicator.
+ * Weakest usable signal is usually 10 - 15 dB SNR. */
+ if (noise_dbm) {
+ if (rssi_dbm - noise_dbm >= 40)
+ return 100;
+ else if (rssi_dbm < noise_dbm)
+ return 0;
+ sig_qual = ((rssi_dbm - noise_dbm) * 5) / 2;
+
+ /* Else use just the signal level.
+ * This formula is a least squares fit of data points collected and
+ * compared with a reference system that had a percentage (%) display
+ * for signal quality. */
+ } else
+ sig_qual = (100 * (RSSI_RANGE * RSSI_RANGE) - degradation *
+ (15 * RSSI_RANGE + 62 * degradation)) /
+ (RSSI_RANGE * RSSI_RANGE);
+
+ if (sig_qual > 100)
+ sig_qual = 100;
+ else if (sig_qual < 1)
+ sig_qual = 0;
+
+ return sig_qual;
}
/**
/* uCode wakes up after power-down sleep */
if (inta & CSR_INT_BIT_WAKEUP) {
IWL_DEBUG_ISR("Wakeup interrupt\n");
- iwl4965_rx_queue_update_write_ptr(priv, &priv->rxq);
+ iwl_rx_queue_update_write_ptr(priv, &priv->rxq);
iwl4965_tx_queue_update_write_ptr(priv, &priv->txq[0]);
iwl4965_tx_queue_update_write_ptr(priv, &priv->txq[1]);
iwl4965_tx_queue_update_write_ptr(priv, &priv->txq[2]);
* Rx "responses" (frame-received notification), and other
* notifications from uCode come through here*/
if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
- iwl4965_rx_handle(priv);
+ iwl_rx_handle(priv);
handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
}
return;
mutex_lock(&priv->mutex);
- iwl4965_rx_replenish(priv);
+ iwl_rx_replenish(priv);
mutex_unlock(&priv->mutex);
}
iwl4965_dealloc_ucode_pci(priv);
if (priv->rxq.bd)
- iwl4965_rx_queue_free(priv, &priv->rxq);
+ iwl_rx_queue_free(priv, &priv->rxq);
iwl4965_hw_txq_ctx_free(priv);
iwlcore_clear_stations_table(priv);
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff