[PATCH] ohci1394, sbp2: fix "scsi_add_device failed" with PL-3507 based devices
authorStefan Richter <stefanr@s5r6.in-berlin.de>
Mon, 15 May 2006 20:09:46 +0000 (22:09 +0200)
committerLinus Torvalds <torvalds@g5.osdl.org>
Thu, 18 May 2006 04:32:22 +0000 (21:32 -0700)
Re-enable posted writes for status FIFO.

Besides bringing back a very minor bandwidth tweak from Linux 2.6.15.x
and older, this also fixes an interoperability regression since 2.6.16:

   http://bugzilla.kernel.org/show_bug.cgi?id=6356
   (sbp2: scsi_add_device failed. IEEE1394 HD is not working anymore.)

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Tested-by: Vanei Heidemann <linux@javanei.com.br>
Tested-by: Martin Putzlocher <mputzi@gmx.de> (chip type unconfirmed)
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
drivers/ieee1394/ohci1394.c
drivers/ieee1394/sbp2.c

index 19222878aae92943f5528d09e67582a517048024..11f13778f13915e35bea6075dae7676e717952f9 100644 (file)
@@ -553,7 +553,7 @@ static void ohci_initialize(struct ti_ohci *ohci)
         * register content.
         * To actually enable physical responses is the job of our interrupt
         * handler which programs the physical request filter. */
-       reg_write(ohci, OHCI1394_PhyUpperBound, 0xffff0000);
+       reg_write(ohci, OHCI1394_PhyUpperBound, 0x01000000);
 
        DBGMSG("physUpperBoundOffset=%08x",
               reg_read(ohci, OHCI1394_PhyUpperBound));
index 73555806c483304fbb8a549326b0610d15cf4f5f..8a23fb54c6939bdbdac285570a45974e74740b48 100644 (file)
@@ -835,11 +835,16 @@ static struct scsi_id_instance_data *sbp2_alloc_device(struct unit_directory *ud
 
        /* Register the status FIFO address range. We could use the same FIFO
         * for targets at different nodes. However we need different FIFOs per
-        * target in order to support multi-unit devices. */
+        * target in order to support multi-unit devices.
+        * The FIFO is located out of the local host controller's physical range
+        * but, if possible, within the posted write area. Status writes will
+        * then be performed as unified transactions. This slightly reduces
+        * bandwidth usage, and some Prolific based devices seem to require it.
+        */
        scsi_id->status_fifo_addr = hpsb_allocate_and_register_addrspace(
                        &sbp2_highlevel, ud->ne->host, &sbp2_ops,
                        sizeof(struct sbp2_status_block), sizeof(quadlet_t),
-                       ~0ULL, ~0ULL);
+                       0x010000000000ULL, CSR1212_ALL_SPACE_END);
        if (!scsi_id->status_fifo_addr) {
                SBP2_ERR("failed to allocate status FIFO address range");
                goto failed_alloc;