This includes both the OEM SecureEdge products as well as the
SME product line.
-config SH_HS7751RVOIP
- bool "HS7751RVOIP"
- depends on CPU_SUBTYPE_SH7751R
- help
- Select HS7751RVOIP if configuring for a Renesas Technology
- Sales VoIP board.
-
config SH_7710VOIPGW
bool "SH7710-VOIP-GW"
depends on CPU_SUBTYPE_SH7710
machdir-$(CONFIG_SH_MPC1211) += mpc1211
machdir-$(CONFIG_SH_SH03) += sh03
machdir-$(CONFIG_SH_SECUREEDGE5410) += snapgear
-machdir-$(CONFIG_SH_HS7751RVOIP) += renesas/hs7751rvoip
machdir-$(CONFIG_SH_RTS7751R2D) += renesas/rts7751r2d
machdir-$(CONFIG_SH_7751_SYSTEMH) += renesas/systemh
machdir-$(CONFIG_SH_EDOSK7705) += renesas/edosk7705
+++ /dev/null
-if SH_HS7751RVOIP
-
-menu "HS7751RVoIP options"
-
-config HS7751RVOIP_CODEC
- bool "Support VoIP Codec section"
- help
- Selecting this option will support CODEC section.
-
-endmenu
-
-endif
+++ /dev/null
-#
-# Makefile for the HS7751RVoIP specific parts of the kernel
-#
-
-obj-y := setup.o io.o irq.o
-
-obj-$(CONFIG_PCI) += pci.o
-
+++ /dev/null
-/*
- * linux/arch/sh/boards/renesas/hs7751rvoip/io.c
- *
- * Copyright (C) 2001 Ian da Silva, Jeremy Siegel
- * Based largely on io_se.c.
- *
- * I/O routine for Renesas Technology sales HS7751RVoIP
- *
- * Initial version only to support LAN access; some
- * placeholder code from io_hs7751rvoip.c left in with the
- * expectation of later SuperIO and PCMCIA access.
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <asm/io.h>
-#include <asm/hs7751rvoip.h>
-#include <asm/addrspace.h>
-
-extern void *area6_io8_base; /* Area 6 8bit I/O Base address */
-extern void *area5_io16_base; /* Area 5 16bit I/O Base address */
-
-/*
- * The 7751R HS7751RVoIP uses the built-in PCI controller (PCIC)
- * of the 7751R processor, and has a SuperIO accessible via the PCI.
- * The board also includes a PCMCIA controller on its memory bus,
- * like the other Solution Engine boards.
- */
-
-#define CODEC_IO_BASE 0x1000
-#define CODEC_IOMAP(a) ((unsigned long)area6_io8_base + ((a) - CODEC_IO_BASE))
-
-static inline unsigned long port2adr(unsigned int port)
-{
- if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6)
- if (port == 0x3f6)
- return ((unsigned long)area5_io16_base + 0x0c);
- else
- return ((unsigned long)area5_io16_base + 0x800 +
- ((port-0x1f0) << 1));
- else
- maybebadio((unsigned long)port);
- return port;
-}
-
-/* The 7751R HS7751RVoIP seems to have everything hooked */
-/* up pretty normally (nothing on high-bytes only...) so this */
-/* shouldn't be needed */
-static inline int shifted_port(unsigned long port)
-{
- /* For IDE registers, value is not shifted */
- if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6)
- return 0;
- else
- return 1;
-}
-
-#if defined(CONFIG_HS7751RVOIP_CODEC)
-#define codec_port(port) \
- ((CODEC_IO_BASE <= (port)) && ((port) < (CODEC_IO_BASE + 0x20)))
-#else
-#define codec_port(port) (0)
-#endif
-
-/*
- * General outline: remap really low stuff [eventually] to SuperIO,
- * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
- * is mapped through the PCI IO window. Stuff with high bits (PXSEG)
- * should be way beyond the window, and is used w/o translation for
- * compatibility.
- */
-unsigned char hs7751rvoip_inb(unsigned long port)
-{
- if (PXSEG(port))
- return ctrl_inb(port);
- else if (codec_port(port))
- return ctrl_inb(CODEC_IOMAP(port));
- else if (is_pci_ioaddr(port) || shifted_port(port))
- return ctrl_inb(pci_ioaddr(port));
- else
- return ctrl_inw(port2adr(port)) & 0xff;
-}
-
-unsigned char hs7751rvoip_inb_p(unsigned long port)
-{
- unsigned char v;
-
- if (PXSEG(port))
- v = ctrl_inb(port);
- else if (codec_port(port))
- v = ctrl_inb(CODEC_IOMAP(port));
- else if (is_pci_ioaddr(port) || shifted_port(port))
- v = ctrl_inb(pci_ioaddr(port));
- else
- v = ctrl_inw(port2adr(port)) & 0xff;
- ctrl_delay();
- return v;
-}
-
-unsigned short hs7751rvoip_inw(unsigned long port)
-{
- if (PXSEG(port))
- return ctrl_inw(port);
- else if (is_pci_ioaddr(port) || shifted_port(port))
- return ctrl_inw(pci_ioaddr(port));
- else
- maybebadio(port);
- return 0;
-}
-
-unsigned int hs7751rvoip_inl(unsigned long port)
-{
- if (PXSEG(port))
- return ctrl_inl(port);
- else if (is_pci_ioaddr(port) || shifted_port(port))
- return ctrl_inl(pci_ioaddr(port));
- else
- maybebadio(port);
- return 0;
-}
-
-void hs7751rvoip_outb(unsigned char value, unsigned long port)
-{
-
- if (PXSEG(port))
- ctrl_outb(value, port);
- else if (codec_port(port))
- ctrl_outb(value, CODEC_IOMAP(port));
- else if (is_pci_ioaddr(port) || shifted_port(port))
- ctrl_outb(value, pci_ioaddr(port));
- else
- ctrl_outb(value, port2adr(port));
-}
-
-void hs7751rvoip_outb_p(unsigned char value, unsigned long port)
-{
- if (PXSEG(port))
- ctrl_outb(value, port);
- else if (codec_port(port))
- ctrl_outb(value, CODEC_IOMAP(port));
- else if (is_pci_ioaddr(port) || shifted_port(port))
- ctrl_outb(value, pci_ioaddr(port));
- else
- ctrl_outw(value, port2adr(port));
-
- ctrl_delay();
-}
-
-void hs7751rvoip_outw(unsigned short value, unsigned long port)
-{
- if (PXSEG(port))
- ctrl_outw(value, port);
- else if (is_pci_ioaddr(port) || shifted_port(port))
- ctrl_outw(value, pci_ioaddr(port));
- else
- maybebadio(port);
-}
-
-void hs7751rvoip_outl(unsigned int value, unsigned long port)
-{
- if (PXSEG(port))
- ctrl_outl(value, port);
- else if (is_pci_ioaddr(port) || shifted_port(port))
- ctrl_outl(value, pci_ioaddr(port));
- else
- maybebadio(port);
-}
-
-void hs7751rvoip_insb(unsigned long port, void *addr, unsigned long count)
-{
- u8 *buf = addr;
-
- if (PXSEG(port))
- while (count--)
- *buf++ = ctrl_inb(port);
- else if (codec_port(port))
- while (count--)
- *buf++ = ctrl_inb(CODEC_IOMAP(port));
- else if (is_pci_ioaddr(port) || shifted_port(port)) {
- volatile u8 *bp = (volatile u8 *)pci_ioaddr(port);
-
- while (count--)
- *buf++ = *bp;
- } else {
- volatile u16 *p = (volatile u16 *)port2adr(port);
-
- while (count--)
- *buf++ = *p & 0xff;
- }
-}
-
-void hs7751rvoip_insw(unsigned long port, void *addr, unsigned long count)
-{
- volatile u16 *p;
- u16 *buf = addr;
-
- if (PXSEG(port))
- p = (volatile u16 *)port;
- else if (is_pci_ioaddr(port) || shifted_port(port))
- p = (volatile u16 *)pci_ioaddr(port);
- else
- p = (volatile u16 *)port2adr(port);
- while (count--)
- *buf++ = *p;
-}
-
-void hs7751rvoip_insl(unsigned long port, void *addr, unsigned long count)
-{
-
- if (is_pci_ioaddr(port) || shifted_port(port)) {
- volatile u32 *p = (volatile u32 *)pci_ioaddr(port);
- u32 *buf = addr;
-
- while (count--)
- *buf++ = *p;
- } else
- maybebadio(port);
-}
-
-void hs7751rvoip_outsb(unsigned long port, const void *addr, unsigned long count)
-{
- const u8 *buf = addr;
-
- if (PXSEG(port))
- while (count--)
- ctrl_outb(*buf++, port);
- else if (codec_port(port))
- while (count--)
- ctrl_outb(*buf++, CODEC_IOMAP(port));
- else if (is_pci_ioaddr(port) || shifted_port(port)) {
- volatile u8 *bp = (volatile u8 *)pci_ioaddr(port);
-
- while (count--)
- *bp = *buf++;
- } else {
- volatile u16 *p = (volatile u16 *)port2adr(port);
-
- while (count--)
- *p = *buf++;
- }
-}
-
-void hs7751rvoip_outsw(unsigned long port, const void *addr, unsigned long count)
-{
- volatile u16 *p;
- const u16 *buf = addr;
-
- if (PXSEG(port))
- p = (volatile u16 *)port;
- else if (is_pci_ioaddr(port) || shifted_port(port))
- p = (volatile u16 *)pci_ioaddr(port);
- else
- p = (volatile u16 *)port2adr(port);
-
- while (count--)
- *p = *buf++;
-}
-
-void hs7751rvoip_outsl(unsigned long port, const void *addr, unsigned long count)
-{
- const u32 *buf = addr;
-
- if (is_pci_ioaddr(port) || shifted_port(port)) {
- volatile u32 *p = (volatile u32 *)pci_ioaddr(port);
-
- while (count--)
- *p = *buf++;
- } else
- maybebadio(port);
-}
-
-void __iomem *hs7751rvoip_ioport_map(unsigned long port, unsigned int size)
-{
- if (PXSEG(port))
- return (void __iomem *)port;
- else if (unlikely(codec_port(port) && (size == 1)))
- return (void __iomem *)CODEC_IOMAP(port);
- else if (is_pci_ioaddr(port))
- return (void __iomem *)pci_ioaddr(port);
-
- return (void __iomem *)port2adr(port);
-}
+++ /dev/null
-/*
- * linux/arch/sh/boards/renesas/hs7751rvoip/irq.c
- *
- * Copyright (C) 2000 Kazumoto Kojima
- *
- * Renesas Technology Sales HS7751RVoIP Support.
- *
- * Modified for HS7751RVoIP by
- * Atom Create Engineering Co., Ltd. 2002.
- * Lineo uSolutions, Inc. 2003.
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/hs7751rvoip.h>
-
-static int mask_pos[] = {8, 9, 10, 11, 12, 13, 0, 1, 2, 3, 4, 5, 6, 7};
-
-static void enable_hs7751rvoip_irq(unsigned int irq);
-static void disable_hs7751rvoip_irq(unsigned int irq);
-
-/* shutdown is same as "disable" */
-#define shutdown_hs7751rvoip_irq disable_hs7751rvoip_irq
-
-static void ack_hs7751rvoip_irq(unsigned int irq);
-static void end_hs7751rvoip_irq(unsigned int irq);
-
-static unsigned int startup_hs7751rvoip_irq(unsigned int irq)
-{
- enable_hs7751rvoip_irq(irq);
- return 0; /* never anything pending */
-}
-
-static void disable_hs7751rvoip_irq(unsigned int irq)
-{
- unsigned short val;
- unsigned short mask = 0xffff ^ (0x0001 << mask_pos[irq]);
-
- /* Set the priority in IPR to 0 */
- val = ctrl_inw(IRLCNTR3);
- val &= mask;
- ctrl_outw(val, IRLCNTR3);
-}
-
-static void enable_hs7751rvoip_irq(unsigned int irq)
-{
- unsigned short val;
- unsigned short value = (0x0001 << mask_pos[irq]);
-
- /* Set priority in IPR back to original value */
- val = ctrl_inw(IRLCNTR3);
- val |= value;
- ctrl_outw(val, IRLCNTR3);
-}
-
-static void ack_hs7751rvoip_irq(unsigned int irq)
-{
- disable_hs7751rvoip_irq(irq);
-}
-
-static void end_hs7751rvoip_irq(unsigned int irq)
-{
- if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
- enable_hs7751rvoip_irq(irq);
-}
-
-static struct hw_interrupt_type hs7751rvoip_irq_type = {
- .typename = "HS7751RVoIP IRQ",
- .startup = startup_hs7751rvoip_irq,
- .shutdown = shutdown_hs7751rvoip_irq,
- .enable = enable_hs7751rvoip_irq,
- .disable = disable_hs7751rvoip_irq,
- .ack = ack_hs7751rvoip_irq,
- .end = end_hs7751rvoip_irq,
-};
-
-static void make_hs7751rvoip_irq(unsigned int irq)
-{
- disable_irq_nosync(irq);
- irq_desc[irq].chip = &hs7751rvoip_irq_type;
- disable_hs7751rvoip_irq(irq);
-}
-
-/*
- * Initialize IRQ setting
- */
-void __init init_hs7751rvoip_IRQ(void)
-{
- int i;
-
- /* IRL0=ON HOOK1
- * IRL1=OFF HOOK1
- * IRL2=ON HOOK2
- * IRL3=OFF HOOK2
- * IRL4=Ringing Detection
- * IRL5=CODEC
- * IRL6=Ethernet
- * IRL7=Ethernet Hub
- * IRL8=USB Communication
- * IRL9=USB Connection
- * IRL10=USB DMA
- * IRL11=CF Card
- * IRL12=PCMCIA
- * IRL13=PCI Slot
- */
- ctrl_outw(0x9876, IRLCNTR1);
- ctrl_outw(0xdcba, IRLCNTR2);
- ctrl_outw(0x0050, IRLCNTR4);
- ctrl_outw(0x4321, IRLCNTR5);
-
- for (i=0; i<14; i++)
- make_hs7751rvoip_irq(i);
-}
+++ /dev/null
-/*
- * linux/arch/sh/boards/renesas/hs7751rvoip/pci.c
- *
- * Author: Ian DaSilva (idasilva@mvista.com)
- *
- * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * PCI initialization for the Renesas SH7751R HS7751RVoIP board
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <linux/module.h>
-
-#include <asm/io.h>
-#include "../../../drivers/pci/pci-sh7751.h"
-#include <asm/hs7751rvoip/hs7751rvoip.h>
-
-#define PCIMCR_MRSET_OFF 0xBFFFFFFF
-#define PCIMCR_RFSH_OFF 0xFFFFFFFB
-
-/*
- * Only long word accesses of the PCIC's internal local registers and the
- * configuration registers from the CPU is supported.
- */
-#define PCIC_WRITE(x,v) writel((v), PCI_REG(x))
-#define PCIC_READ(x) readl(PCI_REG(x))
-
-/*
- * Description: This function sets up and initializes the pcic, sets
- * up the BARS, maps the DRAM into the address space etc, etc.
- */
-int __init pcibios_init_platform(void)
-{
- unsigned long bcr1, wcr1, wcr2, wcr3, mcr;
- unsigned short bcr2, bcr3;
-
- /*
- * Initialize the slave bus controller on the pcic. The values used
- * here should not be hardcoded, but they should be taken from the bsc
- * on the processor, to make this function as generic as possible.
- * (i.e. Another sbc may usr different SDRAM timing settings -- in order
- * for the pcic to work, its settings need to be exactly the same.)
- */
- bcr1 = (*(volatile unsigned long *)(SH7751_BCR1));
- bcr2 = (*(volatile unsigned short *)(SH7751_BCR2));
- bcr3 = (*(volatile unsigned short *)(SH7751_BCR3));
- wcr1 = (*(volatile unsigned long *)(SH7751_WCR1));
- wcr2 = (*(volatile unsigned long *)(SH7751_WCR2));
- wcr3 = (*(volatile unsigned long *)(SH7751_WCR3));
- mcr = (*(volatile unsigned long *)(SH7751_MCR));
-
- bcr1 = bcr1 | 0x00080000; /* Enable Bit 19, BREQEN */
- (*(volatile unsigned long *)(SH7751_BCR1)) = bcr1;
-
- bcr1 = bcr1 | 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */
- PCIC_WRITE(SH7751_PCIBCR1, bcr1); /* PCIC BCR1 */
- PCIC_WRITE(SH7751_PCIBCR2, bcr2); /* PCIC BCR2 */
- PCIC_WRITE(SH7751_PCIBCR3, bcr3); /* PCIC BCR3 */
- PCIC_WRITE(SH7751_PCIWCR1, wcr1); /* PCIC WCR1 */
- PCIC_WRITE(SH7751_PCIWCR2, wcr2); /* PCIC WCR2 */
- PCIC_WRITE(SH7751_PCIWCR3, wcr3); /* PCIC WCR3 */
- mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
- PCIC_WRITE(SH7751_PCIMCR, mcr); /* PCIC MCR */
-
- /* Enable all interrupts, so we know what to fix */
- PCIC_WRITE(SH7751_PCIINTM, 0x0000c3ff);
- PCIC_WRITE(SH7751_PCIAINTM, 0x0000380f);
-
- /* Set up standard PCI config registers */
- PCIC_WRITE(SH7751_PCICONF1, 0xFB900047); /* Bus Master, Mem & I/O access */
- PCIC_WRITE(SH7751_PCICONF2, 0x00000000); /* PCI Class code & Revision ID */
- PCIC_WRITE(SH7751_PCICONF4, 0xab000001); /* PCI I/O address (local regs) */
- PCIC_WRITE(SH7751_PCICONF5, 0x0c000000); /* PCI MEM address (local RAM) */
- PCIC_WRITE(SH7751_PCICONF6, 0xd0000000); /* PCI MEM address (unused) */
- PCIC_WRITE(SH7751_PCICONF11, 0x35051054); /* PCI Subsystem ID & Vendor ID */
- PCIC_WRITE(SH7751_PCILSR0, 0x03f00000); /* MEM (full 64M exposed) */
- PCIC_WRITE(SH7751_PCILSR1, 0x00000000); /* MEM (unused) */
- PCIC_WRITE(SH7751_PCILAR0, 0x0c000000); /* MEM (direct map from PCI) */
- PCIC_WRITE(SH7751_PCILAR1, 0x00000000); /* MEM (unused) */
-
- /* Now turn it on... */
- PCIC_WRITE(SH7751_PCICR, 0xa5000001);
-
- /*
- * Set PCIMBR and PCIIOBR here, assuming a single window
- * (16M MEM, 256K IO) is enough. If a larger space is
- * needed, the readx/writex and inx/outx functions will
- * have to do more (e.g. setting registers for each call).
- */
-
- /*
- * Set the MBR so PCI address is one-to-one with window,
- * meaning all calls go straight through... use ifdef to
- * catch erroneous assumption.
- */
- BUG_ON(PCIBIOS_MIN_MEM != SH7751_PCI_MEMORY_BASE);
-
- PCIC_WRITE(SH7751_PCIMBR, PCIBIOS_MIN_MEM);
-
- /* Set IOBR for window containing area specified in pci.h */
- PCIC_WRITE(SH7751_PCIIOBR, (PCIBIOS_MIN_IO & SH7751_PCIIOBR_MASK));
-
- /* All done, may as well say so... */
- printk("SH7751R PCI: Finished initialization of the PCI controller\n");
-
- return 1;
-}
-
-int __init pcibios_map_platform_irq(u8 slot, u8 pin)
-{
- switch (slot) {
- case 0: return IRQ_PCISLOT; /* PCI Extend slot */
- case 1: return IRQ_PCMCIA; /* PCI Cardbus Bridge */
- case 2: return IRQ_PCIETH; /* Realtek Ethernet controller */
- case 3: return IRQ_PCIHUB; /* Realtek Ethernet Hub controller */
- default:
- printk("PCI: Bad IRQ mapping request for slot %d\n", slot);
- return -1;
- }
-}
-
-static struct resource sh7751_io_resource = {
- .name = "SH7751_IO",
- .start = 0x4000,
- .end = 0x4000 + SH7751_PCI_IO_SIZE - 1,
- .flags = IORESOURCE_IO
-};
-
-static struct resource sh7751_mem_resource = {
- .name = "SH7751_mem",
- .start = SH7751_PCI_MEMORY_BASE,
- .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
- .flags = IORESOURCE_MEM
-};
-
-extern struct pci_ops sh7751_pci_ops;
-
-struct pci_channel board_pci_channels[] = {
- { &sh7751_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
- { NULL, NULL, NULL, 0, 0 },
-};
-EXPORT_SYMBOL(board_pci_channels);
+++ /dev/null
-/*
- * Renesas Technology Sales HS7751RVoIP Support.
- *
- * Copyright (C) 2000 Kazumoto Kojima
- *
- * Modified for HS7751RVoIP by
- * Atom Create Engineering Co., Ltd. 2002.
- * Lineo uSolutions, Inc. 2003.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/mm.h>
-#include <linux/pm.h>
-#include <asm/hs7751rvoip.h>
-#include <asm/io.h>
-#include <asm/machvec.h>
-
-static void hs7751rvoip_power_off(void)
-{
- ctrl_outw(ctrl_inw(PA_OUTPORTR) & 0xffdf, PA_OUTPORTR);
-}
-
-void *area5_io8_base;
-void *area6_io8_base;
-void *area5_io16_base;
-void *area6_io16_base;
-
-static int __init hs7751rvoip_cf_init(void)
-{
- pgprot_t prot;
- unsigned long paddrbase;
-
- /* open I/O area window */
- paddrbase = virt_to_phys((void *)(PA_AREA5_IO+0x00000800));
- prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_COM16);
- area5_io16_base = p3_ioremap(paddrbase, PAGE_SIZE, prot.pgprot);
- if (!area5_io16_base) {
- printk("allocate_cf_area : can't open CF I/O window!\n");
- return -ENOMEM;
- }
-
- /* XXX : do we need attribute and common-memory area also? */
-
- paddrbase = virt_to_phys((void *)PA_AREA6_IO);
-#if defined(CONFIG_HS7751RVOIP_CODEC)
- prot = PAGE_KERNEL_PCC(0, _PAGE_PCC_COM8);
-#else
- prot = PAGE_KERNEL_PCC(0, _PAGE_PCC_IO8);
-#endif
- area6_io8_base = p3_ioremap(paddrbase, PAGE_SIZE, prot.pgprot);
- if (!area6_io8_base) {
- printk("allocate_cf_area : can't open CODEC I/O 8bit window!\n");
- return -ENOMEM;
- }
- prot = PAGE_KERNEL_PCC(0, _PAGE_PCC_IO16);
- area6_io16_base = p3_ioremap(paddrbase, PAGE_SIZE, prot.pgprot);
- if (!area6_io16_base) {
- printk("allocate_cf_area : can't open CODEC I/O 16bit window!\n");
- return -ENOMEM;
- }
-
- return 0;
-}
-device_initcall(hs7751rvoip_cf_init);
-
-/*
- * Initialize the board
- */
-static void __init hs7751rvoip_setup(char **cmdline_p)
-{
- ctrl_outb(0xf0, PA_OUTPORTR);
- pm_power_off = hs7751rvoip_power_off;
-
- printk(KERN_INFO "Renesas Technology Sales HS7751RVoIP-2 support.\n");
-}
-
-static struct sh_machine_vector mv_hs7751rvoip __initmv = {
- .mv_name = "HS7751RVoIP",
- .mv_setup = hs7751rvoip_setup,
- .mv_nr_irqs = 72,
-
- .mv_inb = hs7751rvoip_inb,
- .mv_inw = hs7751rvoip_inw,
- .mv_inl = hs7751rvoip_inl,
- .mv_outb = hs7751rvoip_outb,
- .mv_outw = hs7751rvoip_outw,
- .mv_outl = hs7751rvoip_outl,
-
- .mv_inb_p = hs7751rvoip_inb_p,
- .mv_inw_p = hs7751rvoip_inw,
- .mv_inl_p = hs7751rvoip_inl,
- .mv_outb_p = hs7751rvoip_outb_p,
- .mv_outw_p = hs7751rvoip_outw,
- .mv_outl_p = hs7751rvoip_outl,
-
- .mv_insb = hs7751rvoip_insb,
- .mv_insw = hs7751rvoip_insw,
- .mv_insl = hs7751rvoip_insl,
- .mv_outsb = hs7751rvoip_outsb,
- .mv_outsw = hs7751rvoip_outsw,
- .mv_outsl = hs7751rvoip_outsl,
-
- .mv_init_irq = init_hs7751rvoip_IRQ,
- .mv_ioport_map = hs7751rvoip_ioport_map,
-};
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18
-# Tue Oct 3 13:04:52 2006
-#
-CONFIG_SUPERH=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System type
-#
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_EC3104 is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_BIGSUR is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-CONFIG_SH_HS7751RVOIP=y
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_R7780RP is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
-CONFIG_CPU_SH4=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
-# CONFIG_CPU_SUBTYPE_SH7705 is not set
-# CONFIG_CPU_SUBTYPE_SH7706 is not set
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
-# CONFIG_CPU_SUBTYPE_SH7709 is not set
-# CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7750 is not set
-# CONFIG_CPU_SUBTYPE_SH7091 is not set
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
-# CONFIG_CPU_SUBTYPE_SH7751 is not set
-CONFIG_CPU_SUBTYPE_SH7751R=y
-# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7770 is not set
-# CONFIG_CPU_SUBTYPE_SH7780 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
-# CONFIG_CPU_SUBTYPE_SH7343 is not set
-
-#
-# Memory management options
-#
-CONFIG_MMU=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_MEMORY_SIZE=0x04000000
-CONFIG_VSYSCALL=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-
-#
-# Cache configuration
-#
-# CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
-
-#
-# Processor features
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SH_FPU=y
-# CONFIG_SH_DSP is not set
-# CONFIG_SH_STORE_QUEUES is not set
-CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_SR_RB=y
-
-#
-# Timer support
-#
-CONFIG_SH_TMU=y
-
-#
-# HS7751RVoIP options
-#
-CONFIG_HS7751RVOIP_CODEC=y
-CONFIG_SH_PCLK_FREQ=60000000
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# DMA support
-#
-# CONFIG_SH_DMA is not set
-
-#
-# Companion Chips
-#
-# CONFIG_HD6446X_SERIES is not set
-
-#
-# Kernel features
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_KEXEC is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
-CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
-
-#
-# Boot options
-#
-CONFIG_ZERO_PAGE_OFFSET=0x00001000
-CONFIG_BOOT_LINK_OFFSET=0x00800000
-# CONFIG_UBC_WAKEUP is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="mem=64M console=ttySC1,115200 root=/dev/hda1"
-
-#
-# Bus options
-#
-# CONFIG_PCI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_MULTIPLE_TABLES is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
-# CONFIG_IP_ROUTE_VERBOSE is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=1
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_STNIC is not set
-# CONFIG_SMC91X is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=2
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_KGDB is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
PCI_COMMAND, cmdstat | PCI_COMMAND_IO |
PCI_COMMAND_MEMORY |
PCI_COMMAND_MASTER);
-#if !defined(CONFIG_SH_HS7751RVOIP) && !defined(CONFIG_SH_RTS7751R2D)
early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
PCI_LATENCY_TIMER, 0x80);
-#endif
/* Allocate PCI I/O and/or memory space */
pciauto_setup_bars(hose, top_bus, current_bus, pci_devfn, PCI_BASE_ADDRESS_5);
DREAMCAST SH_DREAMCAST
MPC1211 SH_MPC1211
SNAPGEAR SH_SECUREEDGE5410
-HS7751RVOIP SH_HS7751RVOIP
EDOSK7705 SH_EDOSK7705
SH4202_MICRODEV SH_SH4202_MICRODEV
SH03 SH_SH03
+++ /dev/null
-#ifndef __ASM_SH_RENESAS_HS7751RVOIP_H
-#define __ASM_SH_RENESAS_HS7751RVOIP_H
-
-/*
- * linux/include/asm-sh/hs7751rvoip/hs7751rvoip.h
- *
- * Copyright (C) 2000 Atom Create Engineering Co., Ltd.
- *
- * Renesas Technology Sales HS7751RVoIP support
- */
-
-/* Box specific addresses. */
-
-#define PA_BCR 0xa4000000 /* FPGA */
-#define PA_SLICCNTR1 0xa4000006 /* SLIC PIO Control 1 */
-#define PA_SLICCNTR2 0xa4000008 /* SLIC PIO Control 2 */
-#define PA_DMACNTR 0xa400000a /* USB DMA Control */
-#define PA_INPORTR 0xa400000c /* Input Port Register */
-#define PA_OUTPORTR 0xa400000e /* Output Port Reguster */
-#define PA_VERREG 0xa4000014 /* FPGA Version Register */
-
-#define PA_IDE_OFFSET 0x1f0 /* CF IDE Offset */
-
-#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */
-#define IRLCNTR2 (PA_BCR + 2) /* Interrupt Control Register2 */
-#define IRLCNTR3 (PA_BCR + 4) /* Interrupt Control Register3 */
-#define IRLCNTR4 (PA_BCR + 16) /* Interrupt Control Register4 */
-#define IRLCNTR5 (PA_BCR + 18) /* Interrupt Control Register5 */
-
-#define IRQ_PCIETH 6 /* PCI Ethernet IRQ */
-#define IRQ_PCIHUB 7 /* PCI Ethernet Hub IRQ */
-#define IRQ_USBCOM 8 /* USB Comunication IRQ */
-#define IRQ_USBCON 9 /* USB Connect IRQ */
-#define IRQ_USBDMA 10 /* USB DMA IRQ */
-#define IRQ_CFCARD 11 /* CF Card IRQ */
-#define IRQ_PCMCIA 12 /* PCMCIA IRQ */
-#define IRQ_PCISLOT 13 /* PCI Slot #1 IRQ */
-#define IRQ_ONHOOK1 0 /* ON HOOK1 IRQ */
-#define IRQ_OFFHOOK1 1 /* OFF HOOK1 IRQ */
-#define IRQ_ONHOOK2 2 /* ON HOOK2 IRQ */
-#define IRQ_OFFHOOK2 3 /* OFF HOOK2 IRQ */
-#define IRQ_RINGING 4 /* Ringing IRQ */
-#define IRQ_CODEC 5 /* CODEC IRQ */
-
-#define __IO_PREFIX hs7751rvoip
-#include <asm/io_generic.h>
-
-/* arch/sh/boards/renesas/hs7751rvoip/irq.c */
-void init_hs7751rvoip_IRQ(void);
-
-/* arch/sh/boards/renesas/hs7751rvoip/io.c */
-void *hs7751rvoip_ioremap(unsigned long, unsigned long);
-
-#endif /* __ASM_SH_RENESAS_HS7751RVOIP */
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff