[media] V4L: atmel-isi: convert to the new mbus-config subdev operations
authorGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Wed, 27 Jul 2011 15:18:37 +0000 (12:18 -0300)
committerMauro Carvalho Chehab <mchehab@redhat.com>
Thu, 3 Nov 2011 20:27:42 +0000 (18:27 -0200)
Switch from soc-camera specific .{query,set}_bus_param() to V4L2
subdevice .[gs]_mbus_config() operations.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/video/atmel-isi.c

index 774715d2f84f33a52cc4b9fd98fbf667b2630abf..06f6595a1c9a8faa97ff734c383875d6a545abb0 100644 (file)
@@ -94,6 +94,7 @@ struct atmel_isi {
        unsigned int                    irq;
 
        struct isi_platform_data        *pdata;
+       u16                             width_flags;    /* max 12 bits */
 
        struct list_head                video_buffer_list;
        struct frame_buffer             *active;
@@ -647,50 +648,42 @@ static bool isi_camera_packing_supported(const struct soc_mbus_pixelfmt *fmt)
                 fmt->packing == SOC_MBUS_PACKING_EXTEND16);
 }
 
-static unsigned long make_bus_param(struct atmel_isi *isi)
-{
-       unsigned long flags;
-       /*
-        * Platform specified synchronization and pixel clock polarities are
-        * only a recommendation and are only used during probing. Atmel ISI
-        * camera interface only works in master mode, i.e., uses HSYNC and
-        * VSYNC signals from the sensor
-        */
-       flags = SOCAM_MASTER |
-               SOCAM_HSYNC_ACTIVE_HIGH |
-               SOCAM_HSYNC_ACTIVE_LOW |
-               SOCAM_VSYNC_ACTIVE_HIGH |
-               SOCAM_VSYNC_ACTIVE_LOW |
-               SOCAM_PCLK_SAMPLE_RISING |
-               SOCAM_PCLK_SAMPLE_FALLING |
-               SOCAM_DATA_ACTIVE_HIGH;
-
-       if (isi->pdata->data_width_flags & ISI_DATAWIDTH_10)
-               flags |= SOCAM_DATAWIDTH_10;
-
-       if (isi->pdata->data_width_flags & ISI_DATAWIDTH_8)
-               flags |= SOCAM_DATAWIDTH_8;
-
-       if (flags & SOCAM_DATAWIDTH_MASK)
-               return flags;
-
-       return 0;
-}
+#define ISI_BUS_PARAM (V4L2_MBUS_MASTER |      \
+               V4L2_MBUS_HSYNC_ACTIVE_HIGH |   \
+               V4L2_MBUS_HSYNC_ACTIVE_LOW |    \
+               V4L2_MBUS_VSYNC_ACTIVE_HIGH |   \
+               V4L2_MBUS_VSYNC_ACTIVE_LOW |    \
+               V4L2_MBUS_PCLK_SAMPLE_RISING |  \
+               V4L2_MBUS_PCLK_SAMPLE_FALLING | \
+               V4L2_MBUS_DATA_ACTIVE_HIGH)
 
 static int isi_camera_try_bus_param(struct soc_camera_device *icd,
                                    unsigned char buswidth)
 {
+       struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
        struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
        struct atmel_isi *isi = ici->priv;
-       unsigned long camera_flags;
+       struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,};
+       unsigned long common_flags;
        int ret;
 
-       camera_flags = icd->ops->query_bus_param(icd);
-       ret = soc_camera_bus_param_compatible(camera_flags,
-                                       make_bus_param(isi));
-       if (!ret)
-               return -EINVAL;
-       return 0;
+       ret = v4l2_subdev_call(sd, video, g_mbus_config, &cfg);
+       if (!ret) {
+               common_flags = soc_mbus_config_compatible(&cfg,
+                                                         ISI_BUS_PARAM);
+               if (!common_flags) {
+                       dev_warn(icd->parent,
+                                "Flags incompatible: camera 0x%x, host 0x%x\n",
+                                cfg.flags, ISI_BUS_PARAM);
+                       return -EINVAL;
+               }
+       } else if (ret != -ENOIOCTLCMD) {
+               return ret;
+       }
+
+       if ((1 << (buswidth - 1)) & isi->width_flags)
+               return 0;
+       return -EINVAL;
 }
 
 
@@ -812,59 +805,71 @@ static int isi_camera_querycap(struct soc_camera_host *ici,
 
 static int isi_camera_set_bus_param(struct soc_camera_device *icd, u32 pixfmt)
 {
+       struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
        struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
        struct atmel_isi *isi = ici->priv;
-       unsigned long bus_flags, camera_flags, common_flags;
+       struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,};
+       unsigned long common_flags;
        int ret;
        u32 cfg1 = 0;
 
-       camera_flags = icd->ops->query_bus_param(icd);
-
-       bus_flags = make_bus_param(isi);
-       common_flags = soc_camera_bus_param_compatible(camera_flags, bus_flags);
-       dev_dbg(icd->parent, "Flags cam: 0x%lx host: 0x%lx common: 0x%lx\n",
-               camera_flags, bus_flags, common_flags);
-       if (!common_flags)
-               return -EINVAL;
+       ret = v4l2_subdev_call(sd, video, g_mbus_config, &cfg);
+       if (!ret) {
+               common_flags = soc_mbus_config_compatible(&cfg,
+                                                         ISI_BUS_PARAM);
+               if (!common_flags) {
+                       dev_warn(icd->parent,
+                                "Flags incompatible: camera 0x%x, host 0x%x\n",
+                                cfg.flags, ISI_BUS_PARAM);
+                       return -EINVAL;
+               }
+       } else if (ret != -ENOIOCTLCMD) {
+               return ret;
+       } else {
+               common_flags = ISI_BUS_PARAM;
+       }
+       dev_dbg(icd->parent, "Flags cam: 0x%x host: 0x%x common: 0x%lx\n",
+               cfg.flags, ISI_BUS_PARAM, common_flags);
 
        /* Make choises, based on platform preferences */
-       if ((common_flags & SOCAM_HSYNC_ACTIVE_HIGH) &&
-           (common_flags & SOCAM_HSYNC_ACTIVE_LOW)) {
+       if ((common_flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH) &&
+           (common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)) {
                if (isi->pdata->hsync_act_low)
-                       common_flags &= ~SOCAM_HSYNC_ACTIVE_HIGH;
+                       common_flags &= ~V4L2_MBUS_HSYNC_ACTIVE_HIGH;
                else
-                       common_flags &= ~SOCAM_HSYNC_ACTIVE_LOW;
+                       common_flags &= ~V4L2_MBUS_HSYNC_ACTIVE_LOW;
        }
 
-       if ((common_flags & SOCAM_VSYNC_ACTIVE_HIGH) &&
-           (common_flags & SOCAM_VSYNC_ACTIVE_LOW)) {
+       if ((common_flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH) &&
+           (common_flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)) {
                if (isi->pdata->vsync_act_low)
-                       common_flags &= ~SOCAM_VSYNC_ACTIVE_HIGH;
+                       common_flags &= ~V4L2_MBUS_VSYNC_ACTIVE_HIGH;
                else
-                       common_flags &= ~SOCAM_VSYNC_ACTIVE_LOW;
+                       common_flags &= ~V4L2_MBUS_VSYNC_ACTIVE_LOW;
        }
 
-       if ((common_flags & SOCAM_PCLK_SAMPLE_RISING) &&
-           (common_flags & SOCAM_PCLK_SAMPLE_FALLING)) {
+       if ((common_flags & V4L2_MBUS_PCLK_SAMPLE_RISING) &&
+           (common_flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)) {
                if (isi->pdata->pclk_act_falling)
-                       common_flags &= ~SOCAM_PCLK_SAMPLE_RISING;
+                       common_flags &= ~V4L2_MBUS_PCLK_SAMPLE_RISING;
                else
-                       common_flags &= ~SOCAM_PCLK_SAMPLE_FALLING;
+                       common_flags &= ~V4L2_MBUS_PCLK_SAMPLE_FALLING;
        }
 
-       ret = icd->ops->set_bus_param(icd, common_flags);
-       if (ret < 0) {
-               dev_dbg(icd->parent, "Camera set_bus_param(%lx) returned %d\n",
+       cfg.flags = common_flags;
+       ret = v4l2_subdev_call(sd, video, s_mbus_config, &cfg);
+       if (ret < 0 && ret != -ENOIOCTLCMD) {
+               dev_dbg(icd->parent, "camera s_mbus_config(0x%lx) returned %d\n",
                        common_flags, ret);
                return ret;
        }
 
        /* set bus param for ISI */
-       if (common_flags & SOCAM_HSYNC_ACTIVE_LOW)
+       if (common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)
                cfg1 |= ISI_CFG1_HSYNC_POL_ACTIVE_LOW;
-       if (common_flags & SOCAM_VSYNC_ACTIVE_LOW)
+       if (common_flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)
                cfg1 |= ISI_CFG1_VSYNC_POL_ACTIVE_LOW;
-       if (common_flags & SOCAM_PCLK_SAMPLE_FALLING)
+       if (common_flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)
                cfg1 |= ISI_CFG1_PIXCLK_POL_ACTIVE_FALLING;
 
        if (isi->pdata->has_emb_sync)
@@ -983,6 +988,11 @@ static int __devinit atmel_isi_probe(struct platform_device *pdev)
                goto err_ioremap;
        }
 
+       if (pdata->data_width_flags & ISI_DATAWIDTH_8)
+               isi->width_flags = 1 << 7;
+       if (pdata->data_width_flags & ISI_DATAWIDTH_10)
+               isi->width_flags |= 1 << 9;
+
        isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS);
 
        irq = platform_get_irq(pdev, 0);