ASoC: remove trigger delay in Freescale MPC8610 sound driver

Remove the delay from the trigger function in the Freescale MPC8610 sound
driver when capture is started.  This delay was used to ensure that the DMA
controller was active when ALSA call the .pointer function to request a
DMA transfer status.  A better approach is for the .pointer function to detect
that DMA has not started, and return zero instead.  This change eliminates
the need for the delay.

Also add some related code to check for a DMA programming error, and report
XRUN if it occurs.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

diff --git a/sound/soc/fsl/fsl_dma.c b/sound/soc/fsl/fsl_dma.c
index b3eb8570cd7bf4a4073082fffdc9f3dbb71d9521..2c4892c853cf8d0c06e6be365f15baec1ca224ed 100644 (file)
--- a/sound/soc/fsl/fsl_dma.c
+++ b/sound/soc/fsl/fsl_dma.c
@@ -697,6 +697,23 @@ static snd_pcm_uframes_t fsl_dma_pointer(struct snd_pcm_substream *substream)
        else
                position = in_be32(&dma_channel->dar);
 
+       /*
+        * When capture is started, the SSI immediately starts to fill its FIFO.
+        * This means that the DMA controller is not started until the FIFO is
+        * full.  However, ALSA calls this function before that happens, when
+        * MR.DAR is still zero.  In this case, just return zero to indicate
+        * that nothing has been received yet.
+        */
+       if (!position)
+               return 0;
+
+       if ((position < dma_private->dma_buf_phys) ||
+           (position > dma_private->dma_buf_end)) {
+               dev_err(substream->pcm->card->dev,
+                       "dma pointer is out of range, halting stream\n");
+               return SNDRV_PCM_POS_XRUN;
+       }
+
        frames = bytes_to_frames(runtime, position - dma_private->dma_buf_phys);
 
        /*

diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index 169bca295b7831f263739042aa1ed3645d59c99a..72823a2b33d62f95694e8e880e4de1a4f1031f82 100644 (file)
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -466,28 +466,12 @@ static int fsl_ssi_trigger(struct snd_pcm_substream *substream, int cmd,
        case SNDRV_PCM_TRIGGER_START:
                clrbits32(&ssi->scr, CCSR_SSI_SCR_SSIEN);
        case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
-               if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+               if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
                        setbits32(&ssi->scr,
                                CCSR_SSI_SCR_SSIEN | CCSR_SSI_SCR_TE);
-               } else {
-                       long timeout = jiffies + 10;
-
+               else
                        setbits32(&ssi->scr,
                                CCSR_SSI_SCR_SSIEN | CCSR_SSI_SCR_RE);
-
-                       /* Wait until the SSI has filled its FIFO. Without this
-                        * delay, ALSA complains about overruns.  When the FIFO
-                        * is full, the DMA controller initiates its first
-                        * transfer.  Until then, however, the DMA's DAR
-                        * register is zero, which translates to an
-                        * out-of-bounds pointer.  This makes ALSA think an
-                        * overrun has occurred.
-                        */
-                       while (!(in_be32(&ssi->sisr) & CCSR_SSI_SISR_RFF0) &&
-                              (jiffies < timeout));
-                       if (!(in_be32(&ssi->sisr) & CCSR_SSI_SISR_RFF0))
-                               return -EIO;
-               }
                break;
 
        case SNDRV_PCM_TRIGGER_STOP: