static inline void bq24190_sysfs_remove_group(struct bq24190_dev_info *bdi) {}
#endif
-/*
- * According to the "Host Mode and default Mode" section of the
- * manual, a write to any register causes the bq24190 to switch
- * from default mode to host mode. It will switch back to default
- * mode after a WDT timeout unless the WDT is turned off as well.
- * So, by simply turning off the WDT, we accomplish both with the
- * same write.
- */
-static int bq24190_set_mode_host(struct bq24190_dev_info *bdi)
+static int bq24190_set_config(struct bq24190_dev_info *bdi)
{
int ret;
u8 v;
bdi->watchdog = ((v & BQ24190_REG_CTTC_WATCHDOG_MASK) >>
BQ24190_REG_CTTC_WATCHDOG_SHIFT);
+
+ /*
+ * According to the "Host Mode and default Mode" section of the
+ * manual, a write to any register causes the bq24190 to switch
+ * from default mode to host mode. It will switch back to default
+ * mode after a WDT timeout unless the WDT is turned off as well.
+ * So, by simply turning off the WDT, we accomplish both with the
+ * same write.
+ */
v &= ~BQ24190_REG_CTTC_WATCHDOG_MASK;
- return bq24190_write(bdi, BQ24190_REG_CTTC, v);
+ ret = bq24190_write(bdi, BQ24190_REG_CTTC, v);
+ if (ret < 0)
+ return ret;
+
+ return 0;
}
static int bq24190_register_reset(struct bq24190_dev_info *bdi)
if (ret < 0)
return ret;
- ret = bq24190_set_mode_host(bdi);
+ ret = bq24190_set_config(bdi);
if (ret < 0)
return ret;
return bq24190_read(bdi, BQ24190_REG_SS, &bdi->ss_reg);
}
+static int bq24190_get_config(struct bq24190_dev_info *bdi)
+{
+ return 0;
+}
+
static int bq24190_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
i2c_set_clientdata(client, bdi);
- if (!client->irq) {
+ if (client->irq <= 0) {
dev_err(dev, "Can't get irq info\n");
return -EINVAL;
}
goto out_pmrt;
}
- ret = bq24190_hw_init(bdi);
- if (ret < 0) {
- dev_err(dev, "Hardware init failed\n");
- goto out_pmrt;
- }
-
charger_cfg.drv_data = bdi;
charger_cfg.supplied_to = bq24190_charger_supplied_to;
charger_cfg.num_supplicants = ARRAY_SIZE(bq24190_charger_supplied_to),
}
}
+ ret = bq24190_get_config(bdi);
+ if (ret < 0) {
+ dev_err(dev, "Can't get devicetree config\n");
+ goto out_charger;
+ }
+
+ ret = bq24190_hw_init(bdi);
+ if (ret < 0) {
+ dev_err(dev, "Hardware init failed\n");
+ goto out_charger;
+ }
+
ret = bq24190_sysfs_create_group(bdi);
- if (ret) {
+ if (ret < 0) {
dev_err(dev, "Can't create sysfs entries\n");
goto out_charger;
}
}
bq24190_register_reset(bdi);
- bq24190_set_mode_host(bdi);
+ bq24190_set_config(bdi);
bq24190_read(bdi, BQ24190_REG_SS, &bdi->ss_reg);
if (error >= 0) {