ARM: shmobile: timer: Drop support for Cortex A8

Commit edf4100906044225 ("ARM: shmobile: sh7372 dtsi: Remove Legacy
file") removed the DTS for the last shmobile SoC with a Cortex A8 CPU
core (sh7372 aka SH-Mobile AP4), hence drop support for it in the
loops-per-jiffy preset code.

As "div" is always 1 for supported contemporary ARM processors, we can
simplify the code:
  - Absorb shmobile_setup_delay_hz(), which was always called with
    mult = div = 1,
  - Return earlier if the Cortex A7/A15 arch timer exists and support is
    enabled.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c
index 67d79f9c6bad5be8be0418a331d90f4be42e94f7..6196a638038530481da95f6938bdf8198c56c880 100644 (file)
--- a/arch/arm/mach-shmobile/timer.c
+++ b/arch/arm/mach-shmobile/timer.c
@@ -20,28 +20,9 @@
 
 #include "common.h"
 
-static void __init shmobile_setup_delay_hz(unsigned int max_cpu_core_hz,
-                                          unsigned int mult, unsigned int div)
-{
-       /* calculate a worst-case loops-per-jiffy value
-        * based on maximum cpu core hz setting and the
-        * __delay() implementation in arch/arm/lib/delay.S
-        *
-        * this will result in a longer delay than expected
-        * when the cpu core runs on lower frequencies.
-        */
-
-       unsigned int value = HZ * div / mult;
-
-       if (!preset_lpj)
-               preset_lpj = max_cpu_core_hz / value;
-}
-
 void __init shmobile_init_delay(void)
 {
        struct device_node *np, *cpus;
-       unsigned int div = 0;
-       bool has_arch_timer = false;
        u32 max_freq = 0;
 
        cpus = of_find_node_by_path("/cpus");
@@ -51,25 +32,32 @@ void __init shmobile_init_delay(void)
        for_each_child_of_node(cpus, np) {
                u32 freq;
 
+               if (IS_ENABLED(CONFIG_ARM_ARCH_TIMER) &&
+                   (of_device_is_compatible(np, "arm,cortex-a7") ||
+                    of_device_is_compatible(np, "arm,cortex-a15"))) {
+                       of_node_put(np);
+                       of_node_put(cpus);
+                       return;
+               }
+
                if (!of_property_read_u32(np, "clock-frequency", &freq))
                        max_freq = max(max_freq, freq);
-
-               if (of_device_is_compatible(np, "arm,cortex-a8")) {
-                       div = 2;
-               } else if (of_device_is_compatible(np, "arm,cortex-a9")) {
-                       div = 1;
-               } else if (of_device_is_compatible(np, "arm,cortex-a7") ||
-                        of_device_is_compatible(np, "arm,cortex-a15")) {
-                       div = 1;
-                       has_arch_timer = true;
-               }
        }
 
        of_node_put(cpus);
 
-       if (!max_freq || !div)
+       if (!max_freq)
                return;
 
-       if (!has_arch_timer || !IS_ENABLED(CONFIG_ARM_ARCH_TIMER))
-               shmobile_setup_delay_hz(max_freq, 1, div);
+       /*
+        * Calculate a worst-case loops-per-jiffy value
+        * based on maximum cpu core hz setting and the
+        * __delay() implementation in arch/arm/lib/delay.S.
+        *
+        * This will result in a longer delay than expected
+        * when the cpu core runs on lower frequencies.
+        */
+
+       if (!preset_lpj)
+               preset_lpj = max_freq / HZ;
 }