[MTD] NAND use symbols instead of literals
authorDavid A. Marlin <dmarlin@redhat.com>
Sun, 23 Jan 2005 18:30:53 +0000 (18:30 +0000)
committerThomas Gleixner <tglx@mtd.linutronix.de>
Mon, 23 May 2005 09:32:36 +0000 (11:32 +0200)
Replace some literals with defined symbols.

Signed-off-by: David A. Marlin <dmarlin@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
drivers/mtd/nand/nand_base.c

index 68a6014f55609c3a371691be647326bf104365ad..9f7c42ceecfac7397ec2c3babbc0667b25b8d0f1 100644 (file)
@@ -55,7 +55,7 @@
  *     The AG-AND chips have nice features for speed improvement,
  *     which are not supported yet. Read / program 4 pages in one go.
  *
- * $Id: nand_base.c,v 1.128 2005/01/18 16:14:56 gleixner Exp $
+ * $Id: nand_base.c,v 1.129 2005/01/23 18:30:50 dmarlin Exp $
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -480,7 +480,7 @@ static int nand_check_wp (struct mtd_info *mtd)
        struct nand_chip *this = mtd->priv;
        /* Check the WP bit */
        this->cmdfunc (mtd, NAND_CMD_STATUS, -1, -1);
-       return (this->read_byte(mtd) & 0x80) ? 0 : 1; 
+       return (this->read_byte(mtd) & NAND_STATUS_WP) ? 0 : 1; 
 }
 
 /**
@@ -585,7 +585,7 @@ static void nand_command (struct mtd_info *mtd, unsigned command, int column, in
                this->hwcontrol(mtd, NAND_CTL_SETCLE);
                this->write_byte(mtd, NAND_CMD_STATUS);
                this->hwcontrol(mtd, NAND_CTL_CLRCLE);
-               while ( !(this->read_byte(mtd) & 0x40));
+               while ( !(this->read_byte(mtd) & NAND_STATUS_READY));
                return;
 
        /* This applies to read commands */     
@@ -692,7 +692,7 @@ static void nand_command_lp (struct mtd_info *mtd, unsigned command, int column,
                this->hwcontrol(mtd, NAND_CTL_SETCLE);
                this->write_byte(mtd, NAND_CMD_STATUS);
                this->hwcontrol(mtd, NAND_CTL_CLRCLE);
-               while ( !(this->read_byte(mtd) & 0x40));
+               while ( !(this->read_byte(mtd) & NAND_STATUS_READY));
                return;
 
        case NAND_CMD_READ0:
@@ -897,7 +897,7 @@ static int nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int pa
                /* call wait ready function */
                status = this->waitfunc (mtd, this, FL_WRITING);
                /* See if device thinks it succeeded */
-               if (status & 0x01) {
+               if (status & NAND_STATUS_FAIL) {
                        DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write, page 0x%08x, ", __FUNCTION__, page);
                        return -EIO;
                }
@@ -1758,7 +1758,7 @@ static int nand_write_oob (struct mtd_info *mtd, loff_t to, size_t len, size_t *
        status = this->waitfunc (mtd, this, FL_WRITING);
 
        /* See if device thinks it succeeded */
-       if (status & 0x01) {
+       if (status & NAND_STATUS_FAIL) {
                DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: " "Failed write, page 0x%08x\n", page);
                ret = -EIO;
                goto out;
@@ -2104,7 +2104,7 @@ int nand_erase_nand (struct mtd_info *mtd, struct erase_info *instr, int allowbb
                status = this->waitfunc (mtd, this, FL_ERASING);
 
                /* See if block erase succeeded */
-               if (status & 0x01) {
+               if (status & NAND_STATUS_FAIL) {
                        DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: " "Failed erase, page 0x%08x\n", page);
                        instr->state = MTD_ERASE_FAILED;
                        instr->fail_addr = (page << this->page_shift);