/*
+ * Copyright (C) 1991,1992 Linus Torvalds
*
- * Copyright (C) 1991, 1992 Linus Torvalds
- */
-
-/*
- * entry.S contains the system-call and fault low-level handling routines.
- * This also contains the timer-interrupt handler, as well as all interrupts
- * and faults that can result in a task-switch.
- *
- * NOTE: This code handles signal-recognition, which happens every time
- * after a timer-interrupt and after each system call.
- *
- * I changed all the .align's to 4 (16 byte alignment), as that's faster
- * on a 486.
+ * entry_32.S contains the system-call and low-level fault and trap handling routines.
*
* Stack layout in 'syscall_exit':
- * ptrace needs to have all regs on the stack.
- * if the order here is changed, it needs to be
- * updated in fork.c:copy_process, signal.c:do_signal,
+ * ptrace needs to have all registers on the stack.
+ * If the order here is changed, it needs to be
+ * updated in fork.c:copy_process(), signal.c:do_signal(),
* ptrace.c and ptrace.h
*
* 0(%esp) - %ebx
* 38(%esp) - %eflags
* 3C(%esp) - %oldesp
* 40(%esp) - %oldss
- *
- * "current" is in register %ebx during any slow entries.
*/
#include <linux/linkage.h>
/* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this. */
#include <linux/elf-em.h>
#define AUDIT_ARCH_I386 (EM_386|__AUDIT_ARCH_LE)
-#define __AUDIT_ARCH_LE 0x40000000
+#define __AUDIT_ARCH_LE 0x40000000
#ifndef CONFIG_AUDITSYSCALL
-#define sysenter_audit syscall_trace_entry
-#define sysexit_audit syscall_exit_work
+# define sysenter_audit syscall_trace_entry
+# define sysexit_audit syscall_exit_work
#endif
.section .entry.text, "ax"
*/
#ifdef CONFIG_PREEMPT
-#define preempt_stop(clobbers) DISABLE_INTERRUPTS(clobbers); TRACE_IRQS_OFF
+# define preempt_stop(clobbers) DISABLE_INTERRUPTS(clobbers); TRACE_IRQS_OFF
#else
-#define preempt_stop(clobbers)
-#define resume_kernel restore_all
+# define preempt_stop(clobbers)
+# define resume_kernel restore_all
#endif
.macro TRACE_IRQS_IRET
#ifdef CONFIG_TRACE_IRQFLAGS
- testl $X86_EFLAGS_IF,PT_EFLAGS(%esp) # interrupts off?
- jz 1f
+ testl $X86_EFLAGS_IF, PT_EFLAGS(%esp) # interrupts off?
+ jz 1f
TRACE_IRQS_ON
1:
#endif
/* unfortunately push/pop can't be no-op */
.macro PUSH_GS
- pushl $0
+ pushl $0
.endm
.macro POP_GS pop=0
- addl $(4 + \pop), %esp
+ addl $(4 + \pop), %esp
.endm
.macro POP_GS_EX
.endm
#else /* CONFIG_X86_32_LAZY_GS */
.macro PUSH_GS
- pushl %gs
+ pushl %gs
.endm
.macro POP_GS pop=0
-98: popl %gs
+98: popl %gs
.if \pop <> 0
add $\pop, %esp
.endif
.endm
.macro POP_GS_EX
.pushsection .fixup, "ax"
-99: movl $0, (%esp)
- jmp 98b
+99: movl $0, (%esp)
+ jmp 98b
.popsection
- _ASM_EXTABLE(98b,99b)
+ _ASM_EXTABLE(98b, 99b)
.endm
.macro PTGS_TO_GS
-98: mov PT_GS(%esp), %gs
+98: mov PT_GS(%esp), %gs
.endm
.macro PTGS_TO_GS_EX
.pushsection .fixup, "ax"
-99: movl $0, PT_GS(%esp)
- jmp 98b
+99: movl $0, PT_GS(%esp)
+ jmp 98b
.popsection
- _ASM_EXTABLE(98b,99b)
+ _ASM_EXTABLE(98b, 99b)
.endm
.macro GS_TO_REG reg
- movl %gs, \reg
+ movl %gs, \reg
.endm
.macro REG_TO_PTGS reg
- movl \reg, PT_GS(%esp)
+ movl \reg, PT_GS(%esp)
.endm
.macro SET_KERNEL_GS reg
- movl $(__KERNEL_STACK_CANARY), \reg
- movl \reg, %gs
+ movl $(__KERNEL_STACK_CANARY), \reg
+ movl \reg, %gs
.endm
-#endif /* CONFIG_X86_32_LAZY_GS */
+#endif /* CONFIG_X86_32_LAZY_GS */
.macro SAVE_ALL
cld
PUSH_GS
- pushl %fs
- pushl %es
- pushl %ds
- pushl %eax
- pushl %ebp
- pushl %edi
- pushl %esi
- pushl %edx
- pushl %ecx
- pushl %ebx
- movl $(__USER_DS), %edx
- movl %edx, %ds
- movl %edx, %es
- movl $(__KERNEL_PERCPU), %edx
- movl %edx, %fs
+ pushl %fs
+ pushl %es
+ pushl %ds
+ pushl %eax
+ pushl %ebp
+ pushl %edi
+ pushl %esi
+ pushl %edx
+ pushl %ecx
+ pushl %ebx
+ movl $(__USER_DS), %edx
+ movl %edx, %ds
+ movl %edx, %es
+ movl $(__KERNEL_PERCPU), %edx
+ movl %edx, %fs
SET_KERNEL_GS %edx
.endm
.macro RESTORE_INT_REGS
- popl %ebx
- popl %ecx
- popl %edx
- popl %esi
- popl %edi
- popl %ebp
- popl %eax
+ popl %ebx
+ popl %ecx
+ popl %edx
+ popl %esi
+ popl %edi
+ popl %ebp
+ popl %eax
.endm
.macro RESTORE_REGS pop=0
RESTORE_INT_REGS
-1: popl %ds
-2: popl %es
-3: popl %fs
+1: popl %ds
+2: popl %es
+3: popl %fs
POP_GS \pop
.pushsection .fixup, "ax"
-4: movl $0, (%esp)
- jmp 1b
-5: movl $0, (%esp)
- jmp 2b
-6: movl $0, (%esp)
- jmp 3b
+4: movl $0, (%esp)
+ jmp 1b
+5: movl $0, (%esp)
+ jmp 2b
+6: movl $0, (%esp)
+ jmp 3b
.popsection
- _ASM_EXTABLE(1b,4b)
- _ASM_EXTABLE(2b,5b)
- _ASM_EXTABLE(3b,6b)
+ _ASM_EXTABLE(1b, 4b)
+ _ASM_EXTABLE(2b, 5b)
+ _ASM_EXTABLE(3b, 6b)
POP_GS_EX
.endm
ENTRY(ret_from_fork)
- pushl %eax
- call schedule_tail
+ pushl %eax
+ call schedule_tail
GET_THREAD_INFO(%ebp)
- popl %eax
- pushl $0x0202 # Reset kernel eflags
+ popl %eax
+ pushl $0x0202 # Reset kernel eflags
popfl
- jmp syscall_exit
+ jmp syscall_exit
END(ret_from_fork)
ENTRY(ret_from_kernel_thread)
- pushl %eax
- call schedule_tail
+ pushl %eax
+ call schedule_tail
GET_THREAD_INFO(%ebp)
- popl %eax
- pushl $0x0202 # Reset kernel eflags
+ popl %eax
+ pushl $0x0202 # Reset kernel eflags
popfl
- movl PT_EBP(%esp),%eax
- call *PT_EBX(%esp)
- movl $0,PT_EAX(%esp)
- jmp syscall_exit
+ movl PT_EBP(%esp), %eax
+ call *PT_EBX(%esp)
+ movl $0, PT_EAX(%esp)
+ jmp syscall_exit
ENDPROC(ret_from_kernel_thread)
/*
ret_from_intr:
GET_THREAD_INFO(%ebp)
#ifdef CONFIG_VM86
- movl PT_EFLAGS(%esp), %eax # mix EFLAGS and CS
- movb PT_CS(%esp), %al
- andl $(X86_EFLAGS_VM | SEGMENT_RPL_MASK), %eax
+ movl PT_EFLAGS(%esp), %eax # mix EFLAGS and CS
+ movb PT_CS(%esp), %al
+ andl $(X86_EFLAGS_VM | SEGMENT_RPL_MASK), %eax
#else
/*
* We can be coming here from child spawned by kernel_thread().
*/
- movl PT_CS(%esp), %eax
- andl $SEGMENT_RPL_MASK, %eax
+ movl PT_CS(%esp), %eax
+ andl $SEGMENT_RPL_MASK, %eax
#endif
- cmpl $USER_RPL, %eax
- jb resume_kernel # not returning to v8086 or userspace
+ cmpl $USER_RPL, %eax
+ jb resume_kernel # not returning to v8086 or userspace
ENTRY(resume_userspace)
LOCKDEP_SYS_EXIT
- DISABLE_INTERRUPTS(CLBR_ANY) # make sure we don't miss an interrupt
- # setting need_resched or sigpending
- # between sampling and the iret
+ DISABLE_INTERRUPTS(CLBR_ANY) # make sure we don't miss an interrupt
+ # setting need_resched or sigpending
+ # between sampling and the iret
TRACE_IRQS_OFF
- movl TI_flags(%ebp), %ecx
- andl $_TIF_WORK_MASK, %ecx # is there any work to be done on
- # int/exception return?
- jne work_pending
- jmp restore_all
+ movl TI_flags(%ebp), %ecx
+ andl $_TIF_WORK_MASK, %ecx # is there any work to be done on
+ # int/exception return?
+ jne work_pending
+ jmp restore_all
END(ret_from_exception)
#ifdef CONFIG_PREEMPT
ENTRY(resume_kernel)
DISABLE_INTERRUPTS(CLBR_ANY)
need_resched:
- cmpl $0,PER_CPU_VAR(__preempt_count)
- jnz restore_all
- testl $X86_EFLAGS_IF,PT_EFLAGS(%esp) # interrupts off (exception path) ?
- jz restore_all
- call preempt_schedule_irq
- jmp need_resched
+ cmpl $0, PER_CPU_VAR(__preempt_count)
+ jnz restore_all
+ testl $X86_EFLAGS_IF, PT_EFLAGS(%esp) # interrupts off (exception path) ?
+ jz restore_all
+ call preempt_schedule_irq
+ jmp need_resched
END(resume_kernel)
#endif
-/* SYSENTER_RETURN points to after the "sysenter" instruction in
- the vsyscall page. See vsyscall-sysentry.S, which defines the symbol. */
+/*
+ * SYSENTER_RETURN points to after the SYSENTER instruction
+ * in the vsyscall page. See vsyscall-sysentry.S, which defines
+ * the symbol.
+ */
- # sysenter call handler stub
+ # SYSENTER call handler stub
ENTRY(entry_SYSENTER_32)
- movl TSS_sysenter_sp0(%esp),%esp
+ movl TSS_sysenter_sp0(%esp), %esp
sysenter_past_esp:
/*
* Interrupts are disabled here, but we can't trace it until
* enough kernel state to call TRACE_IRQS_OFF can be called - but
* we immediately enable interrupts at that point anyway.
*/
- pushl $__USER_DS
- pushl %ebp
+ pushl $__USER_DS
+ pushl %ebp
pushfl
- orl $X86_EFLAGS_IF, (%esp)
- pushl $__USER_CS
+ orl $X86_EFLAGS_IF, (%esp)
+ pushl $__USER_CS
/*
* Push current_thread_info()->sysenter_return to the stack.
* A tiny bit of offset fixup is necessary: TI_sysenter_return
* TOP_OF_KERNEL_STACK_PADDING takes us to the top of the stack;
* and THREAD_SIZE takes us to the bottom.
*/
- pushl ((TI_sysenter_return) - THREAD_SIZE + TOP_OF_KERNEL_STACK_PADDING + 4*4)(%esp)
+ pushl ((TI_sysenter_return) - THREAD_SIZE + TOP_OF_KERNEL_STACK_PADDING + 4*4)(%esp)
- pushl %eax
+ pushl %eax
SAVE_ALL
ENABLE_INTERRUPTS(CLBR_NONE)
* Load the potential sixth argument from user stack.
* Careful about security.
*/
- cmpl $__PAGE_OFFSET-3,%ebp
- jae syscall_fault
+ cmpl $__PAGE_OFFSET-3, %ebp
+ jae syscall_fault
ASM_STAC
-1: movl (%ebp),%ebp
+1: movl (%ebp), %ebp
ASM_CLAC
- movl %ebp,PT_EBP(%esp)
- _ASM_EXTABLE(1b,syscall_fault)
+ movl %ebp, PT_EBP(%esp)
+ _ASM_EXTABLE(1b, syscall_fault)
GET_THREAD_INFO(%ebp)
- testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%ebp)
- jnz sysenter_audit
+ testl $_TIF_WORK_SYSCALL_ENTRY, TI_flags(%ebp)
+ jnz sysenter_audit
sysenter_do_call:
- cmpl $(NR_syscalls), %eax
- jae sysenter_badsys
- call *sys_call_table(,%eax,4)
+ cmpl $(NR_syscalls), %eax
+ jae sysenter_badsys
+ call *sys_call_table(, %eax, 4)
sysenter_after_call:
- movl %eax,PT_EAX(%esp)
+ movl %eax, PT_EAX(%esp)
LOCKDEP_SYS_EXIT
DISABLE_INTERRUPTS(CLBR_ANY)
TRACE_IRQS_OFF
- movl TI_flags(%ebp), %ecx
- testl $_TIF_ALLWORK_MASK, %ecx
- jnz sysexit_audit
+ movl TI_flags(%ebp), %ecx
+ testl $_TIF_ALLWORK_MASK, %ecx
+ jnz sysexit_audit
sysenter_exit:
/* if something modifies registers it must also disable sysexit */
- movl PT_EIP(%esp), %edx
- movl PT_OLDESP(%esp), %ecx
- xorl %ebp,%ebp
+ movl PT_EIP(%esp), %edx
+ movl PT_OLDESP(%esp), %ecx
+ xorl %ebp, %ebp
TRACE_IRQS_ON
-1: mov PT_FS(%esp), %fs
+1: mov PT_FS(%esp), %fs
PTGS_TO_GS
ENABLE_INTERRUPTS_SYSEXIT
#ifdef CONFIG_AUDITSYSCALL
sysenter_audit:
- testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%ebp)
- jnz syscall_trace_entry
- /* movl PT_EAX(%esp), %eax already set, syscall number: 1st arg to audit */
- movl PT_EBX(%esp), %edx /* ebx/a0: 2nd arg to audit */
- /* movl PT_ECX(%esp), %ecx already set, a1: 3nd arg to audit */
- pushl PT_ESI(%esp) /* a3: 5th arg */
- pushl PT_EDX+4(%esp) /* a2: 4th arg */
- call __audit_syscall_entry
- popl %ecx /* get that remapped edx off the stack */
- popl %ecx /* get that remapped esi off the stack */
- movl PT_EAX(%esp),%eax /* reload syscall number */
- jmp sysenter_do_call
+ testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT), TI_flags(%ebp)
+ jnz syscall_trace_entry
+ /* movl PT_EAX(%esp), %eax already set, syscall number: 1st arg to audit */
+ movl PT_EBX(%esp), %edx /* ebx/a0: 2nd arg to audit */
+ /* movl PT_ECX(%esp), %ecx already set, a1: 3nd arg to audit */
+ pushl PT_ESI(%esp) /* a3: 5th arg */
+ pushl PT_EDX+4(%esp) /* a2: 4th arg */
+ call __audit_syscall_entry
+ popl %ecx /* get that remapped edx off the stack */
+ popl %ecx /* get that remapped esi off the stack */
+ movl PT_EAX(%esp), %eax /* reload syscall number */
+ jmp sysenter_do_call
sysexit_audit:
- testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %ecx
- jnz syscall_exit_work
+ testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %ecx
+ jnz syscall_exit_work
TRACE_IRQS_ON
ENABLE_INTERRUPTS(CLBR_ANY)
- movl %eax,%edx /* second arg, syscall return value */
- cmpl $-MAX_ERRNO,%eax /* is it an error ? */
- setbe %al /* 1 if so, 0 if not */
- movzbl %al,%eax /* zero-extend that */
- call __audit_syscall_exit
+ movl %eax, %edx /* second arg, syscall return value */
+ cmpl $-MAX_ERRNO, %eax /* is it an error ? */
+ setbe %al /* 1 if so, 0 if not */
+ movzbl %al, %eax /* zero-extend that */
+ call __audit_syscall_exit
DISABLE_INTERRUPTS(CLBR_ANY)
TRACE_IRQS_OFF
- movl TI_flags(%ebp), %ecx
- testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %ecx
- jnz syscall_exit_work
- movl PT_EAX(%esp),%eax /* reload syscall return value */
- jmp sysenter_exit
+ movl TI_flags(%ebp), %ecx
+ testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %ecx
+ jnz syscall_exit_work
+ movl PT_EAX(%esp), %eax /* reload syscall return value */
+ jmp sysenter_exit
#endif
-.pushsection .fixup,"ax"
-2: movl $0,PT_FS(%esp)
- jmp 1b
+.pushsection .fixup, "ax"
+2: movl $0, PT_FS(%esp)
+ jmp 1b
.popsection
- _ASM_EXTABLE(1b,2b)
+ _ASM_EXTABLE(1b, 2b)
PTGS_TO_GS_EX
ENDPROC(entry_SYSENTER_32)
# system call handler stub
ENTRY(entry_INT80_32)
ASM_CLAC
- pushl %eax # save orig_eax
+ pushl %eax # save orig_eax
SAVE_ALL
GET_THREAD_INFO(%ebp)
- # system call tracing in operation / emulation
- testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%ebp)
- jnz syscall_trace_entry
- cmpl $(NR_syscalls), %eax
- jae syscall_badsys
+ # system call tracing in operation / emulation
+ testl $_TIF_WORK_SYSCALL_ENTRY, TI_flags(%ebp)
+ jnz syscall_trace_entry
+ cmpl $(NR_syscalls), %eax
+ jae syscall_badsys
syscall_call:
- call *sys_call_table(,%eax,4)
+ call *sys_call_table(, %eax, 4)
syscall_after_call:
- movl %eax,PT_EAX(%esp) # store the return value
+ movl %eax, PT_EAX(%esp) # store the return value
syscall_exit:
LOCKDEP_SYS_EXIT
- DISABLE_INTERRUPTS(CLBR_ANY) # make sure we don't miss an interrupt
- # setting need_resched or sigpending
- # between sampling and the iret
+ DISABLE_INTERRUPTS(CLBR_ANY) # make sure we don't miss an interrupt
+ # setting need_resched or sigpending
+ # between sampling and the iret
TRACE_IRQS_OFF
- movl TI_flags(%ebp), %ecx
- testl $_TIF_ALLWORK_MASK, %ecx # current->work
- jnz syscall_exit_work
+ movl TI_flags(%ebp), %ecx
+ testl $_TIF_ALLWORK_MASK, %ecx # current->work
+ jnz syscall_exit_work
restore_all:
TRACE_IRQS_IRET
restore_all_notrace:
#ifdef CONFIG_X86_ESPFIX32
- movl PT_EFLAGS(%esp), %eax # mix EFLAGS, SS and CS
- # Warning: PT_OLDSS(%esp) contains the wrong/random values if we
- # are returning to the kernel.
- # See comments in process.c:copy_thread() for details.
- movb PT_OLDSS(%esp), %ah
- movb PT_CS(%esp), %al
- andl $(X86_EFLAGS_VM | (SEGMENT_TI_MASK << 8) | SEGMENT_RPL_MASK), %eax
- cmpl $((SEGMENT_LDT << 8) | USER_RPL), %eax
- je ldt_ss # returning to user-space with LDT SS
+ movl PT_EFLAGS(%esp), %eax # mix EFLAGS, SS and CS
+ /*
+ * Warning: PT_OLDSS(%esp) contains the wrong/random values if we
+ * are returning to the kernel.
+ * See comments in process.c:copy_thread() for details.
+ */
+ movb PT_OLDSS(%esp), %ah
+ movb PT_CS(%esp), %al
+ andl $(X86_EFLAGS_VM | (SEGMENT_TI_MASK << 8) | SEGMENT_RPL_MASK), %eax
+ cmpl $((SEGMENT_LDT << 8) | USER_RPL), %eax
+ je ldt_ss # returning to user-space with LDT SS
#endif
restore_nocheck:
- RESTORE_REGS 4 # skip orig_eax/error_code
+ RESTORE_REGS 4 # skip orig_eax/error_code
irq_return:
INTERRUPT_RETURN
-.section .fixup,"ax"
-ENTRY(iret_exc)
- pushl $0 # no error code
- pushl $do_iret_error
- jmp error_code
+.section .fixup, "ax"
+ENTRY(iret_exc )
+ pushl $0 # no error code
+ pushl $do_iret_error
+ jmp error_code
.previous
- _ASM_EXTABLE(irq_return,iret_exc)
+ _ASM_EXTABLE(irq_return, iret_exc)
#ifdef CONFIG_X86_ESPFIX32
ldt_ss:
* is still available to implement the setting of the high
* 16-bits in the INTERRUPT_RETURN paravirt-op.
*/
- cmpl $0, pv_info+PARAVIRT_enabled
- jne restore_nocheck
+ cmpl $0, pv_info+PARAVIRT_enabled
+ jne restore_nocheck
#endif
/*
* a base address that matches for the difference.
*/
#define GDT_ESPFIX_SS PER_CPU_VAR(gdt_page) + (GDT_ENTRY_ESPFIX_SS * 8)
- mov %esp, %edx /* load kernel esp */
- mov PT_OLDESP(%esp), %eax /* load userspace esp */
- mov %dx, %ax /* eax: new kernel esp */
- sub %eax, %edx /* offset (low word is 0) */
+ mov %esp, %edx /* load kernel esp */
+ mov PT_OLDESP(%esp), %eax /* load userspace esp */
+ mov %dx, %ax /* eax: new kernel esp */
+ sub %eax, %edx /* offset (low word is 0) */
shr $16, %edx
- mov %dl, GDT_ESPFIX_SS + 4 /* bits 16..23 */
- mov %dh, GDT_ESPFIX_SS + 7 /* bits 24..31 */
- pushl $__ESPFIX_SS
- pushl %eax /* new kernel esp */
- /* Disable interrupts, but do not irqtrace this section: we
+ mov %dl, GDT_ESPFIX_SS + 4 /* bits 16..23 */
+ mov %dh, GDT_ESPFIX_SS + 7 /* bits 24..31 */
+ pushl $__ESPFIX_SS
+ pushl %eax /* new kernel esp */
+ /*
+ * Disable interrupts, but do not irqtrace this section: we
* will soon execute iret and the tracer was already set to
- * the irqstate after the iret */
+ * the irqstate after the IRET:
+ */
DISABLE_INTERRUPTS(CLBR_EAX)
- lss (%esp), %esp /* switch to espfix segment */
- jmp restore_nocheck
+ lss (%esp), %esp /* switch to espfix segment */
+ jmp restore_nocheck
#endif
ENDPROC(entry_INT80_32)
ALIGN
work_pending:
testb $_TIF_NEED_RESCHED, %cl
- jz work_notifysig
+ jz work_notifysig
work_resched:
- call schedule
+ call schedule
LOCKDEP_SYS_EXIT
- DISABLE_INTERRUPTS(CLBR_ANY) # make sure we don't miss an interrupt
- # setting need_resched or sigpending
- # between sampling and the iret
+ DISABLE_INTERRUPTS(CLBR_ANY) # make sure we don't miss an interrupt
+ # setting need_resched or sigpending
+ # between sampling and the iret
TRACE_IRQS_OFF
- movl TI_flags(%ebp), %ecx
- andl $_TIF_WORK_MASK, %ecx # is there any work to be done other
- # than syscall tracing?
- jz restore_all
+ movl TI_flags(%ebp), %ecx
+ andl $_TIF_WORK_MASK, %ecx # is there any work to be done other
+ # than syscall tracing?
+ jz restore_all
testb $_TIF_NEED_RESCHED, %cl
- jnz work_resched
+ jnz work_resched
-work_notifysig: # deal with pending signals and
- # notify-resume requests
+work_notifysig: # deal with pending signals and
+ # notify-resume requests
#ifdef CONFIG_VM86
- testl $X86_EFLAGS_VM, PT_EFLAGS(%esp)
- movl %esp, %eax
- jnz work_notifysig_v86 # returning to kernel-space or
- # vm86-space
+ testl $X86_EFLAGS_VM, PT_EFLAGS(%esp)
+ movl %esp, %eax
+ jnz work_notifysig_v86 # returning to kernel-space or
+ # vm86-space
1:
#else
- movl %esp, %eax
+ movl %esp, %eax
#endif
TRACE_IRQS_ON
ENABLE_INTERRUPTS(CLBR_NONE)
- movb PT_CS(%esp), %bl
+ movb PT_CS(%esp), %bl
andb $SEGMENT_RPL_MASK, %bl
cmpb $USER_RPL, %bl
- jb resume_kernel
- xorl %edx, %edx
- call do_notify_resume
- jmp resume_userspace
+ jb resume_kernel
+ xorl %edx, %edx
+ call do_notify_resume
+ jmp resume_userspace
#ifdef CONFIG_VM86
ALIGN
work_notifysig_v86:
- pushl %ecx # save ti_flags for do_notify_resume
- call save_v86_state # %eax contains pt_regs pointer
- popl %ecx
- movl %eax, %esp
- jmp 1b
+ pushl %ecx # save ti_flags for do_notify_resume
+ call save_v86_state # %eax contains pt_regs pointer
+ popl %ecx
+ movl %eax, %esp
+ jmp 1b
#endif
END(work_pending)
# perform syscall exit tracing
ALIGN
syscall_trace_entry:
- movl $-ENOSYS,PT_EAX(%esp)
- movl %esp, %eax
- call syscall_trace_enter
+ movl $-ENOSYS, PT_EAX(%esp)
+ movl %esp, %eax
+ call syscall_trace_enter
/* What it returned is what we'll actually use. */
- cmpl $(NR_syscalls), %eax
- jnae syscall_call
- jmp syscall_exit
+ cmpl $(NR_syscalls), %eax
+ jnae syscall_call
+ jmp syscall_exit
END(syscall_trace_entry)
# perform syscall exit tracing
ALIGN
syscall_exit_work:
- testl $_TIF_WORK_SYSCALL_EXIT, %ecx
- jz work_pending
+ testl $_TIF_WORK_SYSCALL_EXIT, %ecx
+ jz work_pending
TRACE_IRQS_ON
- ENABLE_INTERRUPTS(CLBR_ANY) # could let syscall_trace_leave() call
- # schedule() instead
- movl %esp, %eax
- call syscall_trace_leave
- jmp resume_userspace
+ ENABLE_INTERRUPTS(CLBR_ANY) # could let syscall_trace_leave() call
+ # schedule() instead
+ movl %esp, %eax
+ call syscall_trace_leave
+ jmp resume_userspace
END(syscall_exit_work)
syscall_fault:
ASM_CLAC
GET_THREAD_INFO(%ebp)
- movl $-EFAULT,PT_EAX(%esp)
- jmp resume_userspace
+ movl $-EFAULT, PT_EAX(%esp)
+ jmp resume_userspace
END(syscall_fault)
syscall_badsys:
- movl $-ENOSYS,%eax
- jmp syscall_after_call
+ movl $-ENOSYS, %eax
+ jmp syscall_after_call
END(syscall_badsys)
sysenter_badsys:
- movl $-ENOSYS,%eax
- jmp sysenter_after_call
+ movl $-ENOSYS, %eax
+ jmp sysenter_after_call
END(sysenter_badsys)
.macro FIXUP_ESPFIX_STACK
*/
#ifdef CONFIG_X86_ESPFIX32
/* fixup the stack */
- mov GDT_ESPFIX_SS + 4, %al /* bits 16..23 */
- mov GDT_ESPFIX_SS + 7, %ah /* bits 24..31 */
+ mov GDT_ESPFIX_SS + 4, %al /* bits 16..23 */
+ mov GDT_ESPFIX_SS + 7, %ah /* bits 24..31 */
shl $16, %eax
- addl %esp, %eax /* the adjusted stack pointer */
- pushl $__KERNEL_DS
- pushl %eax
- lss (%esp), %esp /* switch to the normal stack segment */
+ addl %esp, %eax /* the adjusted stack pointer */
+ pushl $__KERNEL_DS
+ pushl %eax
+ lss (%esp), %esp /* switch to the normal stack segment */
#endif
.endm
.macro UNWIND_ESPFIX_STACK
#ifdef CONFIG_X86_ESPFIX32
- movl %ss, %eax
+ movl %ss, %eax
/* see if on espfix stack */
- cmpw $__ESPFIX_SS, %ax
- jne 27f
- movl $__KERNEL_DS, %eax
- movl %eax, %ds
- movl %eax, %es
+ cmpw $__ESPFIX_SS, %ax
+ jne 27f
+ movl $__KERNEL_DS, %eax
+ movl %eax, %ds
+ movl %eax, %es
/* switch to normal stack */
FIXUP_ESPFIX_STACK
27:
ENTRY(irq_entries_start)
vector=FIRST_EXTERNAL_VECTOR
.rept (FIRST_SYSTEM_VECTOR - FIRST_EXTERNAL_VECTOR)
- pushl $(~vector+0x80) /* Note: always in signed byte range */
+ pushl $(~vector+0x80) /* Note: always in signed byte range */
vector=vector+1
jmp common_interrupt
.align 8
.p2align CONFIG_X86_L1_CACHE_SHIFT
common_interrupt:
ASM_CLAC
- addl $-0x80,(%esp) /* Adjust vector into the [-256,-1] range */
+ addl $-0x80, (%esp) /* Adjust vector into the [-256, -1] range */
SAVE_ALL
TRACE_IRQS_OFF
- movl %esp,%eax
- call do_IRQ
- jmp ret_from_intr
+ movl %esp, %eax
+ call do_IRQ
+ jmp ret_from_intr
ENDPROC(common_interrupt)
#define BUILD_INTERRUPT3(name, nr, fn) \
ENTRY(name) \
ASM_CLAC; \
- pushl $~(nr); \
+ pushl $~(nr); \
SAVE_ALL; \
TRACE_IRQS_OFF \
- movl %esp,%eax; \
- call fn; \
- jmp ret_from_intr; \
+ movl %esp, %eax; \
+ call fn; \
+ jmp ret_from_intr; \
ENDPROC(name)
#ifdef CONFIG_TRACING
-#define TRACE_BUILD_INTERRUPT(name, nr) \
- BUILD_INTERRUPT3(trace_##name, nr, smp_trace_##name)
+# define TRACE_BUILD_INTERRUPT(name, nr) BUILD_INTERRUPT3(trace_##name, nr, smp_trace_##name)
#else
-#define TRACE_BUILD_INTERRUPT(name, nr)
+# define TRACE_BUILD_INTERRUPT(name, nr)
#endif
-#define BUILD_INTERRUPT(name, nr) \
- BUILD_INTERRUPT3(name, nr, smp_##name); \
+#define BUILD_INTERRUPT(name, nr) \
+ BUILD_INTERRUPT3(name, nr, smp_##name); \
TRACE_BUILD_INTERRUPT(name, nr)
/* The include is where all of the SMP etc. interrupts come from */
ENTRY(coprocessor_error)
ASM_CLAC
- pushl $0
- pushl $do_coprocessor_error
- jmp error_code
+ pushl $0
+ pushl $do_coprocessor_error
+ jmp error_code
END(coprocessor_error)
ENTRY(simd_coprocessor_error)
ASM_CLAC
- pushl $0
+ pushl $0
#ifdef CONFIG_X86_INVD_BUG
/* AMD 486 bug: invd from userspace calls exception 19 instead of #GP */
- ALTERNATIVE "pushl $do_general_protection", \
- "pushl $do_simd_coprocessor_error", \
+ ALTERNATIVE "pushl $do_general_protection", \
+ "pushl $do_simd_coprocessor_error", \
X86_FEATURE_XMM
#else
- pushl $do_simd_coprocessor_error
+ pushl $do_simd_coprocessor_error
#endif
- jmp error_code
+ jmp error_code
END(simd_coprocessor_error)
ENTRY(device_not_available)
ASM_CLAC
- pushl $-1 # mark this as an int
- pushl $do_device_not_available
- jmp error_code
+ pushl $-1 # mark this as an int
+ pushl $do_device_not_available
+ jmp error_code
END(device_not_available)
#ifdef CONFIG_PARAVIRT
ENTRY(overflow)
ASM_CLAC
- pushl $0
- pushl $do_overflow
- jmp error_code
+ pushl $0
+ pushl $do_overflow
+ jmp error_code
END(overflow)
ENTRY(bounds)
ASM_CLAC
- pushl $0
- pushl $do_bounds
- jmp error_code
+ pushl $0
+ pushl $do_bounds
+ jmp error_code
END(bounds)
ENTRY(invalid_op)
ASM_CLAC
- pushl $0
- pushl $do_invalid_op
- jmp error_code
+ pushl $0
+ pushl $do_invalid_op
+ jmp error_code
END(invalid_op)
ENTRY(coprocessor_segment_overrun)
ASM_CLAC
- pushl $0
- pushl $do_coprocessor_segment_overrun
- jmp error_code
+ pushl $0
+ pushl $do_coprocessor_segment_overrun
+ jmp error_code
END(coprocessor_segment_overrun)
ENTRY(invalid_TSS)
ASM_CLAC
- pushl $do_invalid_TSS
- jmp error_code
+ pushl $do_invalid_TSS
+ jmp error_code
END(invalid_TSS)
ENTRY(segment_not_present)
ASM_CLAC
- pushl $do_segment_not_present
- jmp error_code
+ pushl $do_segment_not_present
+ jmp error_code
END(segment_not_present)
ENTRY(stack_segment)
ASM_CLAC
- pushl $do_stack_segment
- jmp error_code
+ pushl $do_stack_segment
+ jmp error_code
END(stack_segment)
ENTRY(alignment_check)
ASM_CLAC
- pushl $do_alignment_check
- jmp error_code
+ pushl $do_alignment_check
+ jmp error_code
END(alignment_check)
ENTRY(divide_error)
ASM_CLAC
- pushl $0 # no error code
- pushl $do_divide_error
- jmp error_code
+ pushl $0 # no error code
+ pushl $do_divide_error
+ jmp error_code
END(divide_error)
#ifdef CONFIG_X86_MCE
ENTRY(machine_check)
ASM_CLAC
- pushl $0
- pushl machine_check_vector
- jmp error_code
+ pushl $0
+ pushl machine_check_vector
+ jmp error_code
END(machine_check)
#endif
ENTRY(spurious_interrupt_bug)
ASM_CLAC
- pushl $0
- pushl $do_spurious_interrupt_bug
- jmp error_code
+ pushl $0
+ pushl $do_spurious_interrupt_bug
+ jmp error_code
END(spurious_interrupt_bug)
#ifdef CONFIG_XEN
-/* Xen doesn't set %esp to be precisely what the normal sysenter
- entrypoint expects, so fix it up before using the normal path. */
+/*
+ * Xen doesn't set %esp to be precisely what the normal SYSENTER
+ * entry point expects, so fix it up before using the normal path.
+ */
ENTRY(xen_sysenter_target)
- addl $5*4, %esp /* remove xen-provided frame */
- jmp sysenter_past_esp
+ addl $5*4, %esp /* remove xen-provided frame */
+ jmp sysenter_past_esp
ENTRY(xen_hypervisor_callback)
- pushl $-1 /* orig_ax = -1 => not a system call */
+ pushl $-1 /* orig_ax = -1 => not a system call */
SAVE_ALL
TRACE_IRQS_OFF
- /* Check to see if we got the event in the critical
- region in xen_iret_direct, after we've reenabled
- events and checked for pending events. This simulates
- iret instruction's behaviour where it delivers a
- pending interrupt when enabling interrupts. */
- movl PT_EIP(%esp),%eax
- cmpl $xen_iret_start_crit,%eax
- jb 1f
- cmpl $xen_iret_end_crit,%eax
- jae 1f
+ /*
+ * Check to see if we got the event in the critical
+ * region in xen_iret_direct, after we've reenabled
+ * events and checked for pending events. This simulates
+ * iret instruction's behaviour where it delivers a
+ * pending interrupt when enabling interrupts:
+ */
+ movl PT_EIP(%esp), %eax
+ cmpl $xen_iret_start_crit, %eax
+ jb 1f
+ cmpl $xen_iret_end_crit, %eax
+ jae 1f
- jmp xen_iret_crit_fixup
+ jmp xen_iret_crit_fixup
ENTRY(xen_do_upcall)
-1: mov %esp, %eax
- call xen_evtchn_do_upcall
+1: mov %esp, %eax
+ call xen_evtchn_do_upcall
#ifndef CONFIG_PREEMPT
- call xen_maybe_preempt_hcall
+ call xen_maybe_preempt_hcall
#endif
- jmp ret_from_intr
+ jmp ret_from_intr
ENDPROC(xen_hypervisor_callback)
-# Hypervisor uses this for application faults while it executes.
-# We get here for two reasons:
-# 1. Fault while reloading DS, ES, FS or GS
-# 2. Fault while executing IRET
-# Category 1 we fix up by reattempting the load, and zeroing the segment
-# register if the load fails.
-# Category 2 we fix up by jumping to do_iret_error. We cannot use the
-# normal Linux return path in this case because if we use the IRET hypercall
-# to pop the stack frame we end up in an infinite loop of failsafe callbacks.
-# We distinguish between categories by maintaining a status value in EAX.
+/*
+ * Hypervisor uses this for application faults while it executes.
+ * We get here for two reasons:
+ * 1. Fault while reloading DS, ES, FS or GS
+ * 2. Fault while executing IRET
+ * Category 1 we fix up by reattempting the load, and zeroing the segment
+ * register if the load fails.
+ * Category 2 we fix up by jumping to do_iret_error. We cannot use the
+ * normal Linux return path in this case because if we use the IRET hypercall
+ * to pop the stack frame we end up in an infinite loop of failsafe callbacks.
+ * We distinguish between categories by maintaining a status value in EAX.
+ */
ENTRY(xen_failsafe_callback)
- pushl %eax
- movl $1,%eax
-1: mov 4(%esp),%ds
-2: mov 8(%esp),%es
-3: mov 12(%esp),%fs
-4: mov 16(%esp),%gs
+ pushl %eax
+ movl $1, %eax
+1: mov 4(%esp), %ds
+2: mov 8(%esp), %es
+3: mov 12(%esp), %fs
+4: mov 16(%esp), %gs
/* EAX == 0 => Category 1 (Bad segment)
EAX != 0 => Category 2 (Bad IRET) */
- testl %eax,%eax
- popl %eax
- lea 16(%esp),%esp
- jz 5f
- jmp iret_exc
-5: pushl $-1 /* orig_ax = -1 => not a system call */
+ testl %eax, %eax
+ popl %eax
+ lea 16(%esp), %esp
+ jz 5f
+ jmp iret_exc
+5: pushl $-1 /* orig_ax = -1 => not a system call */
SAVE_ALL
- jmp ret_from_exception
-
-.section .fixup,"ax"
-6: xorl %eax,%eax
- movl %eax,4(%esp)
- jmp 1b
-7: xorl %eax,%eax
- movl %eax,8(%esp)
- jmp 2b
-8: xorl %eax,%eax
- movl %eax,12(%esp)
- jmp 3b
-9: xorl %eax,%eax
- movl %eax,16(%esp)
- jmp 4b
+ jmp ret_from_exception
+
+.section .fixup, "ax"
+6: xorl %eax, %eax
+ movl %eax, 4(%esp)
+ jmp 1b
+7: xorl %eax, %eax
+ movl %eax, 8(%esp)
+ jmp 2b
+8: xorl %eax, %eax
+ movl %eax, 12(%esp)
+ jmp 3b
+9: xorl %eax, %eax
+ movl %eax, 16(%esp)
+ jmp 4b
.previous
- _ASM_EXTABLE(1b,6b)
- _ASM_EXTABLE(2b,7b)
- _ASM_EXTABLE(3b,8b)
- _ASM_EXTABLE(4b,9b)
+ _ASM_EXTABLE(1b, 6b)
+ _ASM_EXTABLE(2b, 7b)
+ _ASM_EXTABLE(3b, 8b)
+ _ASM_EXTABLE(4b, 9b)
ENDPROC(xen_failsafe_callback)
BUILD_INTERRUPT3(xen_hvm_callback_vector, HYPERVISOR_CALLBACK_VECTOR,
xen_evtchn_do_upcall)
-#endif /* CONFIG_XEN */
+#endif /* CONFIG_XEN */
#if IS_ENABLED(CONFIG_HYPERV)
END(mcount)
ENTRY(ftrace_caller)
- pushl %eax
- pushl %ecx
- pushl %edx
- pushl $0 /* Pass NULL as regs pointer */
- movl 4*4(%esp), %eax
- movl 0x4(%ebp), %edx
- movl function_trace_op, %ecx
- subl $MCOUNT_INSN_SIZE, %eax
+ pushl %eax
+ pushl %ecx
+ pushl %edx
+ pushl $0 /* Pass NULL as regs pointer */
+ movl 4*4(%esp), %eax
+ movl 0x4(%ebp), %edx
+ movl function_trace_op, %ecx
+ subl $MCOUNT_INSN_SIZE, %eax
.globl ftrace_call
ftrace_call:
- call ftrace_stub
+ call ftrace_stub
- addl $4,%esp /* skip NULL pointer */
- popl %edx
- popl %ecx
- popl %eax
+ addl $4, %esp /* skip NULL pointer */
+ popl %edx
+ popl %ecx
+ popl %eax
ftrace_ret:
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
.globl ftrace_graph_call
ftrace_graph_call:
- jmp ftrace_stub
+ jmp ftrace_stub
#endif
.globl ftrace_stub
* as the current return ip is. We move the return ip into the
* ip location, and move flags into the return ip location.
*/
- pushl 4(%esp) /* save return ip into ip slot */
-
- pushl $0 /* Load 0 into orig_ax */
- pushl %gs
- pushl %fs
- pushl %es
- pushl %ds
- pushl %eax
- pushl %ebp
- pushl %edi
- pushl %esi
- pushl %edx
- pushl %ecx
- pushl %ebx
-
- movl 13*4(%esp), %eax /* Get the saved flags */
- movl %eax, 14*4(%esp) /* Move saved flags into regs->flags location */
- /* clobbering return ip */
- movl $__KERNEL_CS,13*4(%esp)
-
- movl 12*4(%esp), %eax /* Load ip (1st parameter) */
- subl $MCOUNT_INSN_SIZE, %eax /* Adjust ip */
- movl 0x4(%ebp), %edx /* Load parent ip (2nd parameter) */
- movl function_trace_op, %ecx /* Save ftrace_pos in 3rd parameter */
- pushl %esp /* Save pt_regs as 4th parameter */
+ pushl 4(%esp) /* save return ip into ip slot */
+
+ pushl $0 /* Load 0 into orig_ax */
+ pushl %gs
+ pushl %fs
+ pushl %es
+ pushl %ds
+ pushl %eax
+ pushl %ebp
+ pushl %edi
+ pushl %esi
+ pushl %edx
+ pushl %ecx
+ pushl %ebx
+
+ movl 13*4(%esp), %eax /* Get the saved flags */
+ movl %eax, 14*4(%esp) /* Move saved flags into regs->flags location */
+ /* clobbering return ip */
+ movl $__KERNEL_CS, 13*4(%esp)
+
+ movl 12*4(%esp), %eax /* Load ip (1st parameter) */
+ subl $MCOUNT_INSN_SIZE, %eax /* Adjust ip */
+ movl 0x4(%ebp), %edx /* Load parent ip (2nd parameter) */
+ movl function_trace_op, %ecx /* Save ftrace_pos in 3rd parameter */
+ pushl %esp /* Save pt_regs as 4th parameter */
GLOBAL(ftrace_regs_call)
- call ftrace_stub
-
- addl $4, %esp /* Skip pt_regs */
- movl 14*4(%esp), %eax /* Move flags back into cs */
- movl %eax, 13*4(%esp) /* Needed to keep addl from modifying flags */
- movl 12*4(%esp), %eax /* Get return ip from regs->ip */
- movl %eax, 14*4(%esp) /* Put return ip back for ret */
-
- popl %ebx
- popl %ecx
- popl %edx
- popl %esi
- popl %edi
- popl %ebp
- popl %eax
- popl %ds
- popl %es
- popl %fs
- popl %gs
- addl $8, %esp /* Skip orig_ax and ip */
- popf /* Pop flags at end (no addl to corrupt flags) */
- jmp ftrace_ret
+ call ftrace_stub
+
+ addl $4, %esp /* Skip pt_regs */
+ movl 14*4(%esp), %eax /* Move flags back into cs */
+ movl %eax, 13*4(%esp) /* Needed to keep addl from modifying flags */
+ movl 12*4(%esp), %eax /* Get return ip from regs->ip */
+ movl %eax, 14*4(%esp) /* Put return ip back for ret */
+
+ popl %ebx
+ popl %ecx
+ popl %edx
+ popl %esi
+ popl %edi
+ popl %ebp
+ popl %eax
+ popl %ds
+ popl %es
+ popl %fs
+ popl %gs
+ addl $8, %esp /* Skip orig_ax and ip */
+ popf /* Pop flags at end (no addl to corrupt flags) */
+ jmp ftrace_ret
popf
- jmp ftrace_stub
+ jmp ftrace_stub
#else /* ! CONFIG_DYNAMIC_FTRACE */
ENTRY(mcount)
- cmpl $__PAGE_OFFSET, %esp
- jb ftrace_stub /* Paging not enabled yet? */
+ cmpl $__PAGE_OFFSET, %esp
+ jb ftrace_stub /* Paging not enabled yet? */
- cmpl $ftrace_stub, ftrace_trace_function
- jnz trace
+ cmpl $ftrace_stub, ftrace_trace_function
+ jnz trace
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
- cmpl $ftrace_stub, ftrace_graph_return
- jnz ftrace_graph_caller
+ cmpl $ftrace_stub, ftrace_graph_return
+ jnz ftrace_graph_caller
- cmpl $ftrace_graph_entry_stub, ftrace_graph_entry
- jnz ftrace_graph_caller
+ cmpl $ftrace_graph_entry_stub, ftrace_graph_entry
+ jnz ftrace_graph_caller
#endif
.globl ftrace_stub
ftrace_stub:
/* taken from glibc */
trace:
- pushl %eax
- pushl %ecx
- pushl %edx
- movl 0xc(%esp), %eax
- movl 0x4(%ebp), %edx
- subl $MCOUNT_INSN_SIZE, %eax
-
- call *ftrace_trace_function
-
- popl %edx
- popl %ecx
- popl %eax
- jmp ftrace_stub
+ pushl %eax
+ pushl %ecx
+ pushl %edx
+ movl 0xc(%esp), %eax
+ movl 0x4(%ebp), %edx
+ subl $MCOUNT_INSN_SIZE, %eax
+
+ call *ftrace_trace_function
+
+ popl %edx
+ popl %ecx
+ popl %eax
+ jmp ftrace_stub
END(mcount)
#endif /* CONFIG_DYNAMIC_FTRACE */
#endif /* CONFIG_FUNCTION_TRACER */
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
ENTRY(ftrace_graph_caller)
- pushl %eax
- pushl %ecx
- pushl %edx
- movl 0xc(%esp), %eax
- lea 0x4(%ebp), %edx
- movl (%ebp), %ecx
- subl $MCOUNT_INSN_SIZE, %eax
- call prepare_ftrace_return
- popl %edx
- popl %ecx
- popl %eax
+ pushl %eax
+ pushl %ecx
+ pushl %edx
+ movl 0xc(%esp), %eax
+ lea 0x4(%ebp), %edx
+ movl (%ebp), %ecx
+ subl $MCOUNT_INSN_SIZE, %eax
+ call prepare_ftrace_return
+ popl %edx
+ popl %ecx
+ popl %eax
ret
END(ftrace_graph_caller)
.globl return_to_handler
return_to_handler:
- pushl %eax
- pushl %edx
- movl %ebp, %eax
- call ftrace_return_to_handler
- movl %eax, %ecx
- popl %edx
- popl %eax
- jmp *%ecx
+ pushl %eax
+ pushl %edx
+ movl %ebp, %eax
+ call ftrace_return_to_handler
+ movl %eax, %ecx
+ popl %edx
+ popl %eax
+ jmp *%ecx
#endif
#ifdef CONFIG_TRACING
ENTRY(trace_page_fault)
ASM_CLAC
- pushl $trace_do_page_fault
- jmp error_code
+ pushl $trace_do_page_fault
+ jmp error_code
END(trace_page_fault)
#endif
ENTRY(page_fault)
ASM_CLAC
- pushl $do_page_fault
+ pushl $do_page_fault
ALIGN
error_code:
/* the function address is in %gs's slot on the stack */
- pushl %fs
- pushl %es
- pushl %ds
- pushl %eax
- pushl %ebp
- pushl %edi
- pushl %esi
- pushl %edx
- pushl %ecx
- pushl %ebx
+ pushl %fs
+ pushl %es
+ pushl %ds
+ pushl %eax
+ pushl %ebp
+ pushl %edi
+ pushl %esi
+ pushl %edx
+ pushl %ecx
+ pushl %ebx
cld
- movl $(__KERNEL_PERCPU), %ecx
- movl %ecx, %fs
+ movl $(__KERNEL_PERCPU), %ecx
+ movl %ecx, %fs
UNWIND_ESPFIX_STACK
GS_TO_REG %ecx
- movl PT_GS(%esp), %edi # get the function address
- movl PT_ORIG_EAX(%esp), %edx # get the error code
- movl $-1, PT_ORIG_EAX(%esp) # no syscall to restart
+ movl PT_GS(%esp), %edi # get the function address
+ movl PT_ORIG_EAX(%esp), %edx # get the error code
+ movl $-1, PT_ORIG_EAX(%esp) # no syscall to restart
REG_TO_PTGS %ecx
SET_KERNEL_GS %ecx
- movl $(__USER_DS), %ecx
- movl %ecx, %ds
- movl %ecx, %es
+ movl $(__USER_DS), %ecx
+ movl %ecx, %ds
+ movl %ecx, %es
TRACE_IRQS_OFF
- movl %esp,%eax # pt_regs pointer
- call *%edi
- jmp ret_from_exception
+ movl %esp, %eax # pt_regs pointer
+ call *%edi
+ jmp ret_from_exception
END(page_fault)
/*
* the instruction that would have done it for sysenter.
*/
.macro FIX_STACK offset ok label
- cmpw $__KERNEL_CS, 4(%esp)
- jne \ok
+ cmpw $__KERNEL_CS, 4(%esp)
+ jne \ok
\label:
- movl TSS_sysenter_sp0 + \offset(%esp), %esp
+ movl TSS_sysenter_sp0 + \offset(%esp), %esp
pushfl
- pushl $__KERNEL_CS
- pushl $sysenter_past_esp
+ pushl $__KERNEL_CS
+ pushl $sysenter_past_esp
.endm
ENTRY(debug)
ASM_CLAC
- cmpl $entry_SYSENTER_32,(%esp)
- jne debug_stack_correct
+ cmpl $entry_SYSENTER_32, (%esp)
+ jne debug_stack_correct
FIX_STACK 12, debug_stack_correct, debug_esp_fix_insn
debug_stack_correct:
- pushl $-1 # mark this as an int
+ pushl $-1 # mark this as an int
SAVE_ALL
TRACE_IRQS_OFF
- xorl %edx,%edx # error code 0
- movl %esp,%eax # pt_regs pointer
- call do_debug
- jmp ret_from_exception
+ xorl %edx, %edx # error code 0
+ movl %esp, %eax # pt_regs pointer
+ call do_debug
+ jmp ret_from_exception
END(debug)
/*
ENTRY(nmi)
ASM_CLAC
#ifdef CONFIG_X86_ESPFIX32
- pushl %eax
- movl %ss, %eax
- cmpw $__ESPFIX_SS, %ax
- popl %eax
- je nmi_espfix_stack
+ pushl %eax
+ movl %ss, %eax
+ cmpw $__ESPFIX_SS, %ax
+ popl %eax
+ je nmi_espfix_stack
#endif
- cmpl $entry_SYSENTER_32,(%esp)
- je nmi_stack_fixup
- pushl %eax
- movl %esp,%eax
- /* Do not access memory above the end of our stack page,
+ cmpl $entry_SYSENTER_32, (%esp)
+ je nmi_stack_fixup
+ pushl %eax
+ movl %esp, %eax
+ /*
+ * Do not access memory above the end of our stack page,
* it might not exist.
*/
- andl $(THREAD_SIZE-1),%eax
- cmpl $(THREAD_SIZE-20),%eax
- popl %eax
- jae nmi_stack_correct
- cmpl $entry_SYSENTER_32,12(%esp)
- je nmi_debug_stack_check
+ andl $(THREAD_SIZE-1), %eax
+ cmpl $(THREAD_SIZE-20), %eax
+ popl %eax
+ jae nmi_stack_correct
+ cmpl $entry_SYSENTER_32, 12(%esp)
+ je nmi_debug_stack_check
nmi_stack_correct:
- pushl %eax
+ pushl %eax
SAVE_ALL
- xorl %edx,%edx # zero error code
- movl %esp,%eax # pt_regs pointer
- call do_nmi
- jmp restore_all_notrace
+ xorl %edx, %edx # zero error code
+ movl %esp, %eax # pt_regs pointer
+ call do_nmi
+ jmp restore_all_notrace
nmi_stack_fixup:
FIX_STACK 12, nmi_stack_correct, 1
- jmp nmi_stack_correct
+ jmp nmi_stack_correct
nmi_debug_stack_check:
- cmpw $__KERNEL_CS,16(%esp)
- jne nmi_stack_correct
- cmpl $debug,(%esp)
- jb nmi_stack_correct
- cmpl $debug_esp_fix_insn,(%esp)
- ja nmi_stack_correct
+ cmpw $__KERNEL_CS, 16(%esp)
+ jne nmi_stack_correct
+ cmpl $debug, (%esp)
+ jb nmi_stack_correct
+ cmpl $debug_esp_fix_insn, (%esp)
+ ja nmi_stack_correct
FIX_STACK 24, nmi_stack_correct, 1
- jmp nmi_stack_correct
+ jmp nmi_stack_correct
#ifdef CONFIG_X86_ESPFIX32
nmi_espfix_stack:
/*
* create the pointer to lss back
*/
- pushl %ss
- pushl %esp
- addl $4, (%esp)
+ pushl %ss
+ pushl %esp
+ addl $4, (%esp)
/* copy the iret frame of 12 bytes */
.rept 3
- pushl 16(%esp)
+ pushl 16(%esp)
.endr
- pushl %eax
+ pushl %eax
SAVE_ALL
- FIXUP_ESPFIX_STACK # %eax == %esp
- xorl %edx,%edx # zero error code
- call do_nmi
+ FIXUP_ESPFIX_STACK # %eax == %esp
+ xorl %edx, %edx # zero error code
+ call do_nmi
RESTORE_REGS
- lss 12+4(%esp), %esp # back to espfix stack
- jmp irq_return
+ lss 12+4(%esp), %esp # back to espfix stack
+ jmp irq_return
#endif
END(nmi)
ENTRY(int3)
ASM_CLAC
- pushl $-1 # mark this as an int
+ pushl $-1 # mark this as an int
SAVE_ALL
TRACE_IRQS_OFF
- xorl %edx,%edx # zero error code
- movl %esp,%eax # pt_regs pointer
- call do_int3
- jmp ret_from_exception
+ xorl %edx, %edx # zero error code
+ movl %esp, %eax # pt_regs pointer
+ call do_int3
+ jmp ret_from_exception
END(int3)
ENTRY(general_protection)
- pushl $do_general_protection
- jmp error_code
+ pushl $do_general_protection
+ jmp error_code
END(general_protection)
#ifdef CONFIG_KVM_GUEST
ENTRY(async_page_fault)
ASM_CLAC
- pushl $do_async_page_fault
- jmp error_code
+ pushl $do_async_page_fault
+ jmp error_code
END(async_page_fault)
#endif
-
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff