pata_hpt37x: Further small fixes
authorAlan Cox <alan@lxorguk.ukuu.org.uk>
Thu, 26 Apr 2007 07:19:25 +0000 (00:19 -0700)
committerJeff Garzik <jeff@garzik.org>
Sat, 28 Apr 2007 19:16:39 +0000 (15:16 -0400)
Further HPT37x changes

- No 66MHz 370/370A
- Remove dead special case check now we use the DPLL (as per the IDE driver)

Pointed out by Sergei

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
drivers/ata/pata_hpt37x.c

index fe1b482d5291ab2ab8e98a39b95777aa22ce5127..41d8312963474447feb7faf6284a80efaa00cc53 100644 (file)
@@ -26,7 +26,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME       "pata_hpt37x"
-#define DRV_VERSION    "0.6.4"
+#define DRV_VERSION    "0.6.5"
 
 struct hpt_clock {
        u8      xfer_speed;
@@ -130,7 +130,7 @@ static const struct hpt_chip hpt370 = {
                hpt37x_timings_33,
                NULL,
                NULL,
-               hpt37x_timings_66
+               NULL
        }
 };
 
@@ -141,7 +141,7 @@ static const struct hpt_chip hpt370a = {
                hpt37x_timings_33,
                NULL,
                hpt37x_timings_50,
-               hpt37x_timings_66
+               NULL
        }
 };
 
@@ -1018,8 +1018,8 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
                                        return -ENODEV;
                                port = &info_hpt372;
                                chip_table = &hpt371;
-                               /* Single channel device, paster is not present
-                                  but the NIOS (or us for non x86) must mark it
+                               /* Single channel device, master is not present
+                                  but the BIOS (or us for non x86) must mark it
                                   absent */
                                pci_read_config_byte(dev, 0x50, &mcr1);
                                mcr1 &= ~0x04;
@@ -1131,16 +1131,11 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
        } else {
                port->private_data = (void *)chip_table->clocks[clock_slot];
                /*
-                *      Perform a final fixup. The 371 and 372 clock determines
-                *      if UDMA133 is available. (FIXME: should we use DPLL then ?)
-                */
+                *      Perform a final fixup. Note that we will have used the
+                *      DPLL on the HPT372 which means we don't have to worry
+                *      about lack of UDMA133 support on lower clocks
+                */
 
-               if (clock_slot == 2 && chip_table == &hpt372) { /* 50Mhz */
-                       printk(KERN_WARNING "pata_hpt37x: No UDMA133 support available with 50MHz bus clock.\n");
-                       if (port == &info_hpt372)
-                               port = &info_hpt372_50;
-                       else BUG();
-               }
                if (clock_slot < 2 && port == &info_hpt370)
                        port = &info_hpt370_33;
                if (clock_slot < 2 && port == &info_hpt370a)