staging: comedi: ni_labpc_common: tidy up block comments

Fix the checkpatch.pl issues:
WARNING: Block comments use a trailing */ on a separate line

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/comedi/drivers/ni_labpc_common.c b/drivers/staging/comedi/drivers/ni_labpc_common.c
index 55ab05e3196b9fffd43efa8ace91adc218d95261..b0dfb8eed16dcc0211cfb135737f760fc2be8ebd 100644 (file)
--- a/drivers/staging/comedi/drivers/ni_labpc_common.c
+++ b/drivers/staging/comedi/drivers/ni_labpc_common.c
@@ -84,8 +84,10 @@ static const struct comedi_lrange range_labpc_ao = {
        }
 };
 
-/* functions that do inb/outb and readb/writeb so we can use
- * function pointers to decide which to use */
+/*
+ * functions that do inb/outb and readb/writeb so we can use
+ * function pointers to decide which to use
+ */
 static unsigned int labpc_inb(struct comedi_device *dev, unsigned long reg)
 {
        return inb(dev->iobase + reg);
@@ -656,19 +658,24 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 
        /* figure out what method we will use to transfer data */
        if (devpriv->dma &&
-           /* dma unsafe at RT priority,
-            * and too much setup time for CMDF_WAKE_EOS */
-           (cmd->flags & (CMDF_WAKE_EOS | CMDF_PRIORITY)) == 0)
+           (cmd->flags & (CMDF_WAKE_EOS | CMDF_PRIORITY)) == 0) {
+               /*
+                * dma unsafe at RT priority,
+                * and too much setup time for CMDF_WAKE_EOS
+                */
                xfer = isa_dma_transfer;
-       else if (/* pc-plus has no fifo-half full interrupt */
-                board->is_labpc1200 &&
-                /* wake-end-of-scan should interrupt on fifo not empty */
-                (cmd->flags & CMDF_WAKE_EOS) == 0 &&
-                /* make sure we are taking more than just a few points */
-                (cmd->stop_src != TRIG_COUNT || devpriv->count > 256))
+       } else if (board->is_labpc1200 &&
+                  (cmd->flags & CMDF_WAKE_EOS) == 0 &&
+                  (cmd->stop_src != TRIG_COUNT || devpriv->count > 256)) {
+               /*
+                * pc-plus has no fifo-half full interrupt
+                * wake-end-of-scan should interrupt on fifo not empty
+                * make sure we are taking more than just a few points
+                */
                xfer = fifo_half_full_transfer;
-       else
+       } else {
                xfer = fifo_not_empty_transfer;
+       }
        devpriv->current_transfer = xfer;
 
        labpc_ai_set_chan_and_gain(dev, mode, chan, range, aref);
@@ -679,9 +686,11 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
        /* manual says to set scan enable bit on second pass */
        if (mode == MODE_MULT_CHAN_UP || mode == MODE_MULT_CHAN_DOWN) {
                devpriv->cmd1 |= CMD1_SCANEN;
-               /* need a brief delay before enabling scan, or scan
-                * list will get screwed when you switch
-                * between scan up to scan down mode - dunno why */
+               /*
+                * Need a brief delay before enabling scan, or scan
+                * list will get screwed when you switch between
+                * scan up to scan down mode - dunno why.
+                */
                udelay(1);
                devpriv->write_byte(dev, devpriv->cmd1, CMD1_REG);
        }
@@ -728,8 +737,10 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
        devpriv->cmd4 = 0;
        if (cmd->convert_src != TRIG_EXT)
                devpriv->cmd4 |= CMD4_ECLKRCV;
-       /* XXX should discard first scan when using interval scanning
-        * since manual says it is not synced with scan clock */
+       /*
+        * XXX should discard first scan when using interval scanning
+        * since manual says it is not synced with scan clock.
+        */
        if (!labpc_use_continuous_mode(cmd, mode)) {
                devpriv->cmd4 |= CMD4_INTSCAN;
                if (cmd->scan_begin_src == TRIG_EXT)
@@ -795,8 +806,10 @@ static int labpc_drain_fifo(struct comedi_device *dev)
        return 0;
 }
 
-/* makes sure all data acquired by board is transferred to comedi (used
- * when acquisition is terminated by stop_src == TRIG_EXT). */
+/*
+ * Makes sure all data acquired by board is transferred to comedi (used
+ * when acquisition is terminated by stop_src == TRIG_EXT).
+ */
 static void labpc_drain_dregs(struct comedi_device *dev)
 {
        struct labpc_private *devpriv = dev->private;
@@ -907,9 +920,11 @@ static int labpc_ao_insn_write(struct comedi_device *dev,
 
        channel = CR_CHAN(insn->chanspec);
 
-       /* turn off pacing of analog output channel */
-       /* note: hardware bug in daqcard-1200 means pacing cannot
-        * be independently enabled/disabled for its the two channels */
+       /*
+        * Turn off pacing of analog output channel.
+        * NOTE: hardware bug in daqcard-1200 means pacing cannot
+        * be independently enabled/disabled for its the two channels.
+        */
        spin_lock_irqsave(&dev->spinlock, flags);
        devpriv->cmd2 &= ~CMD2_LDAC(channel);
        devpriv->write_byte(dev, devpriv->cmd2, CMD2_REG);