net: dsa: b53: Include IMP/CPU port in dumb forwarding mode

Since Broadcom tags are not enabled in b53 (DSA_PROTO_TAG_NONE), we need
to make sure that the IMP/CPU port is included in the forwarding
decision.

Without this change, switching between non-management ports would work,
but not between management ports and non-management ports thus breaking
the default state in which DSA switch are brought up.

Fixes: 967dd82ffc52 ("net: dsa: b53: Add support for Broadcom RoboSwitch")
Reported-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 8cf4801994e883be64010934a0413cfbdb86ed16..ca7f3b005a29647cba725c6fcf4c0b242d607bdf 100644 (file)
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -326,6 +326,7 @@ static void b53_get_vlan_entry(struct b53_device *dev, u16 vid,
 
 static void b53_set_forwarding(struct b53_device *dev, int enable)
 {
+       struct dsa_switch *ds = dev->ds;
        u8 mgmt;
 
        b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
@@ -336,6 +337,15 @@ static void b53_set_forwarding(struct b53_device *dev, int enable)
                mgmt &= ~SM_SW_FWD_EN;
 
        b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt);
+
+       /* Include IMP port in dumb forwarding mode when no tagging protocol is
+        * set
+        */
+       if (ds->ops->get_tag_protocol(ds) == DSA_TAG_PROTO_NONE) {
+               b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, &mgmt);
+               mgmt |= B53_MII_DUMB_FWDG_EN;
+               b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, mgmt);
+       }
 }
 
 static void b53_enable_vlan(struct b53_device *dev, bool enable)

diff --git a/drivers/net/dsa/b53/b53_regs.h b/drivers/net/dsa/b53/b53_regs.h
index 9fd24c418fa4256e8517d5dec1dfa97681ba72db..f2a060e7a637757d01ada120efc9827d6865f21a 100644 (file)
--- a/drivers/net/dsa/b53/b53_regs.h
+++ b/drivers/net/dsa/b53/b53_regs.h
@@ -104,6 +104,10 @@
 #define  B53_UC_FWD_EN                 BIT(6)
 #define  B53_MC_FWD_EN                 BIT(7)
 
+/* Switch control (8 bit) */
+#define B53_SWITCH_CTRL                        0x22
+#define  B53_MII_DUMB_FWDG_EN          BIT(6)
+
 /* (16 bit) */
 #define B53_UC_FLOOD_MASK              0x32
 #define B53_MC_FLOOD_MASK              0x34