[MMC] Fix sdhci PIO routines

The sdhci controllers operate with blocks, not bytes. The PIO routines must
therefore make sure that the minimum unit transfered is a complete block.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index b9aa60aed7f04666e111432cdca4d9caa0ef64ae..8e480140cd289d1bb9550bae7a6682cb89ed77d2 100644 (file)
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sdhci.c
@@ -8,12 +8,6 @@
  * published by the Free Software Foundation.
  */
 
- /*
-  * Note that PIO transfer is rather crappy atm. The buffer full/empty
-  * interrupts aren't reliable so we currently transfer the entire buffer
-  * directly. Patches to solve the problem are welcome.
-  */
-
 #include <linux/delay.h>
 #include <linux/highmem.h>
 #include <linux/pci.h>
@@ -128,7 +122,7 @@ static void sdhci_init(struct sdhci_host *host)
                SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_INDEX |
                SDHCI_INT_END_BIT | SDHCI_INT_CRC | SDHCI_INT_TIMEOUT |
                SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT |
-               SDHCI_INT_BUF_EMPTY | SDHCI_INT_BUF_FULL |
+               SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL |
                SDHCI_INT_DMA_END | SDHCI_INT_DATA_END | SDHCI_INT_RESPONSE;
 
        writel(intmask, host->ioaddr + SDHCI_INT_ENABLE);
@@ -189,79 +183,96 @@ static inline int sdhci_next_sg(struct sdhci_host* host)
        return host->num_sg;
 }
 
-static void sdhci_transfer_pio(struct sdhci_host *host)
+static void sdhci_read_block_pio(struct sdhci_host *host)
 {
+       int blksize, chunk_remain;
+       u32 data;
        char *buffer;
-       u32 mask;
-       int bytes, size;
-       unsigned long max_jiffies;
+       int size;
 
-       BUG_ON(!host->data);
+       DBG("PIO reading\n");
 
-       if (host->num_sg == 0)
-               return;
-
-       bytes = 0;
-       if (host->data->flags & MMC_DATA_READ)
-               mask = SDHCI_DATA_AVAILABLE;
-       else
-               mask = SDHCI_SPACE_AVAILABLE;
+       blksize = host->data->blksz;
+       chunk_remain = 0;
+       data = 0;
 
        buffer = sdhci_kmap_sg(host) + host->offset;
 
-       /* Transfer shouldn't take more than 5 s */
-       max_jiffies = jiffies + HZ * 5;
+       while (blksize) {
+               if (chunk_remain == 0) {
+                       data = readl(host->ioaddr + SDHCI_BUFFER);
+                       chunk_remain = min(blksize, 4);
+               }
 
-       while (host->size > 0) {
-               if (time_after(jiffies, max_jiffies)) {
-                       printk(KERN_ERR "%s: PIO transfer stalled. "
-                               "Please report this to "
-                               BUGMAIL ".\n", mmc_hostname(host->mmc));
-                       sdhci_dumpregs(host);
+               size = min(host->size, host->remain);
+               size = min(size, chunk_remain);
 
-                       sdhci_kunmap_sg(host);
+               chunk_remain -= size;
+               blksize -= size;
+               host->offset += size;
+               host->remain -= size;
+               host->size -= size;
+               while (size) {
+                       *buffer = data & 0xFF;
+                       buffer++;
+                       data >>= 8;
+                       size--;
+               }
 
-                       host->data->error = MMC_ERR_FAILED;
-                       sdhci_finish_data(host);
-                       return;
+               if (host->remain == 0) {
+                       sdhci_kunmap_sg(host);
+                       if (sdhci_next_sg(host) == 0) {
+                               BUG_ON(blksize != 0);
+                               return;
+                       }
+                       buffer = sdhci_kmap_sg(host);
                }
+       }
 
-               if (!(readl(host->ioaddr + SDHCI_PRESENT_STATE) & mask))
-                       continue;
+       sdhci_kunmap_sg(host);
+}
 
-               size = min(host->size, host->remain);
+static void sdhci_write_block_pio(struct sdhci_host *host)
+{
+       int blksize, chunk_remain;
+       u32 data;
+       char *buffer;
+       int bytes, size;
 
-               if (size >= 4) {
-                       if (host->data->flags & MMC_DATA_READ)
-                               *(u32*)buffer = readl(host->ioaddr + SDHCI_BUFFER);
-                       else
-                               writel(*(u32*)buffer, host->ioaddr + SDHCI_BUFFER);
-                       size = 4;
-               } else if (size >= 2) {
-                       if (host->data->flags & MMC_DATA_READ)
-                               *(u16*)buffer = readw(host->ioaddr + SDHCI_BUFFER);
-                       else
-                               writew(*(u16*)buffer, host->ioaddr + SDHCI_BUFFER);
-                       size = 2;
-               } else {
-                       if (host->data->flags & MMC_DATA_READ)
-                               *(u8*)buffer = readb(host->ioaddr + SDHCI_BUFFER);
-                       else
-                               writeb(*(u8*)buffer, host->ioaddr + SDHCI_BUFFER);
-                       size = 1;
-               }
+       DBG("PIO writing\n");
+
+       blksize = host->data->blksz;
+       chunk_remain = 4;
+       data = 0;
+
+       bytes = 0;
+       buffer = sdhci_kmap_sg(host) + host->offset;
+
+       while (blksize) {
+               size = min(host->size, host->remain);
+               size = min(size, chunk_remain);
 
-               buffer += size;
+               chunk_remain -= size;
+               blksize -= size;
                host->offset += size;
                host->remain -= size;
-
-               bytes += size;
                host->size -= size;
+               while (size) {
+                       data >>= 8;
+                       data |= (u32)*buffer << 24;
+                       buffer++;
+                       size--;
+               }
+
+               if (chunk_remain == 0) {
+                       writel(data, host->ioaddr + SDHCI_BUFFER);
+                       chunk_remain = min(blksize, 4);
+               }
 
                if (host->remain == 0) {
                        sdhci_kunmap_sg(host);
                        if (sdhci_next_sg(host) == 0) {
-                               DBG("PIO transfer: %d bytes\n", bytes);
+                               BUG_ON(blksize != 0);
                                return;
                        }
                        buffer = sdhci_kmap_sg(host);
@@ -269,8 +280,35 @@ static void sdhci_transfer_pio(struct sdhci_host *host)
        }
 
        sdhci_kunmap_sg(host);
+}
+
+static void sdhci_transfer_pio(struct sdhci_host *host)
+{
+       u32 mask;
+
+       BUG_ON(!host->data);
+
+       if (host->size == 0)
+               return;
+
+       if (host->data->flags & MMC_DATA_READ)
+               mask = SDHCI_DATA_AVAILABLE;
+       else
+               mask = SDHCI_SPACE_AVAILABLE;
+
+       while (readl(host->ioaddr + SDHCI_PRESENT_STATE) & mask) {
+               if (host->data->flags & MMC_DATA_READ)
+                       sdhci_read_block_pio(host);
+               else
+                       sdhci_write_block_pio(host);
+
+               if (host->size == 0)
+                       break;
+
+               BUG_ON(host->num_sg == 0);
+       }
 
-       DBG("PIO transfer: %d bytes\n", bytes);
+       DBG("PIO transfer complete.\n");
 }
 
 static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data)
@@ -863,7 +901,7 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
        if (host->data->error != MMC_ERR_NONE)
                sdhci_finish_data(host);
        else {
-               if (intmask & (SDHCI_INT_BUF_FULL | SDHCI_INT_BUF_EMPTY))
+               if (intmask & (SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL))
                        sdhci_transfer_pio(host);
 
                if (intmask & SDHCI_INT_DATA_END)

diff --git a/drivers/mmc/sdhci.h b/drivers/mmc/sdhci.h
index a8f45215ef3af833b41cc0c97f13a250c30eb779..f8df28f8d6dd0c38558567db58b7cc75d9120e5d 100644 (file)
--- a/drivers/mmc/sdhci.h
+++ b/drivers/mmc/sdhci.h
@@ -95,8 +95,8 @@
 #define  SDHCI_INT_RESPONSE    0x00000001
 #define  SDHCI_INT_DATA_END    0x00000002
 #define  SDHCI_INT_DMA_END     0x00000008
-#define  SDHCI_INT_BUF_EMPTY   0x00000010
-#define  SDHCI_INT_BUF_FULL    0x00000020
+#define  SDHCI_INT_SPACE_AVAIL 0x00000010
+#define  SDHCI_INT_DATA_AVAIL  0x00000020
 #define  SDHCI_INT_CARD_INSERT 0x00000040
 #define  SDHCI_INT_CARD_REMOVE 0x00000080
 #define  SDHCI_INT_CARD_INT    0x00000100
@@ -116,7 +116,7 @@
 #define  SDHCI_INT_CMD_MASK    (SDHCI_INT_RESPONSE | SDHCI_INT_TIMEOUT | \
                SDHCI_INT_CRC | SDHCI_INT_END_BIT | SDHCI_INT_INDEX)
 #define  SDHCI_INT_DATA_MASK   (SDHCI_INT_DATA_END | SDHCI_INT_DMA_END | \
-               SDHCI_INT_BUF_EMPTY | SDHCI_INT_BUF_FULL | \
+               SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | \
                SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_DATA_CRC | \
                SDHCI_INT_DATA_END_BIT)