--- /dev/null
+Cirrus Logic CS4271 DT bindings
+
+This driver supports both the I2C and the SPI bus.
+
+Required properties:
+
+ - compatible: "cirrus,cs4271"
+
+For required properties on SPI, please consult
+Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Required properties on I2C:
+
+ - reg: the i2c address
+
+
+Optional properties:
+
+ - reset-gpio: a GPIO spec to define which pin is connected to the chip's
+ !RESET pin
+
+Examples:
+
+ codec_i2c: cs4271@10 {
+ compatible = "cirrus,cs4271";
+ reg = <0x10>;
+ reset-gpio = <&gpio 23 0>;
+ };
+
+ codec_spi: cs4271@0 {
+ compatible = "cirrus,cs4271";
+ reg = <0x0>;
+ reset-gpio = <&gpio 23 0>;
+ spi-max-frequency = <6000000>;
+ };
+
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/delay.h>
-#include <sound/pcm.h>
-#include <sound/soc.h>
-#include <sound/tlv.h>
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/spi/spi.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/tlv.h>
#include <sound/cs4271.h>
#define CS4271_PCM_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \
#define cs4271_soc_resume NULL
#endif /* CONFIG_PM */
+#ifdef CONFIG_OF
+static const struct of_device_id cs4271_dt_ids[] = {
+ { .compatible = "cirrus,cs4271", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, cs4271_dt_ids);
+#endif
+
static int cs4271_probe(struct snd_soc_codec *codec)
{
struct cs4271_private *cs4271 = snd_soc_codec_get_drvdata(codec);
int ret;
int gpio_nreset = -EINVAL;
+#ifdef CONFIG_OF
+ if (of_match_device(cs4271_dt_ids, codec->dev))
+ gpio_nreset = of_get_named_gpio(codec->dev->of_node,
+ "reset-gpio", 0);
+#endif
+
if (cs4271plat && gpio_is_valid(cs4271plat->gpio_nreset))
gpio_nreset = cs4271plat->gpio_nreset;
.driver = {
.name = "cs4271",
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(cs4271_dt_ids),
},
.probe = cs4271_spi_probe,
.remove = __devexit_p(cs4271_spi_remove),
.driver = {
.name = "cs4271",
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(cs4271_dt_ids),
},
.id_table = cs4271_i2c_id,
.probe = cs4271_i2c_probe,