ARM: dts: am437x-idk: Add Industrial input support

The SN65HVS882 is available on the AM437x IDK and is attached to SPI1.
Input is attached to the I/O header.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts
index 25ce611c65688298db6844213c5bacee6225e7a6..fff7ef6661a7dd7cdc065bfc16a380e983cb7242 100644 (file)
--- a/arch/arm/boot/dts/am437x-idk-evm.dts
+++ b/arch/arm/boot/dts/am437x-idk-evm.dts
@@ -178,6 +178,24 @@
                >;
        };
 
+       spi1_pins_default: spi1_pins_default {
+               pinctrl-single,pins = <
+                       AM4372_IOPAD(0x908, PIN_INPUT | MUX_MODE2)      /* mii1_col.spi1_sclk */
+                       AM4372_IOPAD(0x910, PIN_INPUT | MUX_MODE2)      /* mii1_rx_er.spi1_d1 */
+                       AM4372_IOPAD(0x944, PIN_OUTPUT | MUX_MODE2)     /* rmii1_ref_clk.spi1_cs0 */
+                       AM4372_IOPAD(0x90c, PIN_OUTPUT | MUX_MODE7)     /* mii1_crs.gpio3_1 */
+               >;
+       };
+
+       spi1_pins_sleep: spi1_pins_sleep {
+               pinctrl-single,pins = <
+                       AM4372_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)
+                       AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+                       AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
+                       AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+               >;
+       };
+
        ecap0_pins_default: backlight_pins_default {
                pinctrl-single,pins = <
                        AM4372_IOPAD(0x964, PIN_OUTPUT | MUX_MODE0) /* ecap0_in_pwm0_out.ecap0_in_pwm0_out */
@@ -292,6 +310,26 @@
        clock-frequency = <100000>;
 };
 
+&spi1 {
+       status = "okay";
+       pinctrl-names = "default", "sleep";
+       pinctrl-0 = <&spi1_pins_default>;
+       pinctrl-1 = <&spi1_pins_sleep>;
+       ti,pindir-d0-out-d1-in;
+
+       sn65hvs882: sn65hvs882@0 {
+               compatible = "pisosr-gpio";
+               gpio-controller;
+               #gpio-cells = <2>;
+
+               load-gpios = <&gpio3 1 GPIO_ACTIVE_LOW>;
+
+               reg = <0>;
+               spi-max-frequency = <1000000>;
+               spi-cpol;
+       };
+};
+
 &epwmss0 {
        status = "okay";
 };
@@ -310,6 +348,10 @@
        status = "okay";
 };
 
+&gpio3 {
+       status = "okay";
+};
+
 &gpio4 {
        status = "okay";
 };