#define DMA_PBL_X8_DISABLE 0x00
#define DMA_PBL_X8_ENABLE 0x01
-
/* MAC register offsets */
#define MAC_TCR 0x0000
#define MAC_RCR 0x0004
#define MTL_Q_DISABLED 0x00
#define MTL_Q_ENABLED 0x02
-
/* MTL traffic class register offsets
* Multiple traffic classes can be active. The first class has registers
* that begin at 0x1100. Each subsequent queue has registers that
#define MTL_TSA_SP 0x00
#define MTL_TSA_ETS 0x02
-
/* PCS MMD select register offset
* The MMD select register is used for accessing PCS registers
* when the underlying APB3 interface is using indirect addressing.
*/
#define PCS_MMD_SELECT 0xff
-
/* Descriptor/Packet entry bit positions and sizes */
#define RX_PACKET_ERRORS_CRC_INDEX 2
#define RX_PACKET_ERRORS_CRC_WIDTH 1
#define MDIO_AN_COMP_STAT 0x0030
#endif
-
/* Bit setting and getting macros
* The get macro will extract the current bit field value from within
* the variable
((0x1 << (_width)) - 1)) << (_index))); \
} while (0)
-
/* Bit setting and getting macros based on register fields
* The get macro uses the bit field definitions formed using the input
* names to extract the current bit field value from within the
_prefix##_##_field##_INDEX, \
_prefix##_##_field##_WIDTH, (_val))
-
/* Macros for reading or writing registers
* The ioread macros will get bit fields or full values using the
* register definitions formed using the input names
XGMAC_IOWRITE((_pdata), _reg, reg_val); \
} while (0)
-
/* Macros for reading or writing MTL queue or traffic class registers
* Similar to the standard read and write macros except that the
* base register value is calculated by the queue or traffic class number
XGMAC_MTL_IOWRITE((_pdata), (_n), _reg, reg_val); \
} while (0)
-
/* Macros for reading or writing DMA channel registers
* Similar to the standard read and write macros except that the
* base register value is obtained from the ring
XGMAC_DMA_IOWRITE((_channel), _reg, reg_val); \
} while (0)
-
/* Macros for building, reading or writing register values or bits
* within the register values of XPCS registers.
*/
#define XPCS_IOREAD(_pdata, _off) \
ioread32((_pdata)->xpcs_regs + (_off))
-
/* Macros for building, reading or writing register values or bits
* using MDIO. Different from above because of the use of standardized
* Linux include values. No shifting is performed with the bit
#include "xgbe.h"
#include "xgbe-common.h"
-
static void xgbe_unmap_skb(struct xgbe_prv_data *, struct xgbe_ring_data *);
static void xgbe_free_ring(struct xgbe_prv_data *pdata,
/* Allocate skb & assign to each rdesc */
skb = dev_alloc_skb(pdata->rx_buf_size);
- if (skb == NULL) {
- netdev_alert(pdata->netdev,
- "failed to allocate skb\n");
+ if (skb == NULL)
break;
- }
skb_dma = dma_map_single(pdata->dev, skb->data,
pdata->rx_buf_size, DMA_FROM_DEVICE);
if (dma_mapping_error(pdata->dev, skb_dma)) {