--- /dev/null
+SMIA/SMIA++ sensor
+
+SMIA (Standard Mobile Imaging Architecture) is an image sensor standard
+defined jointly by Nokia and ST. SMIA++, defined by Nokia, is an extension
+of that. These definitions are valid for both types of sensors.
+
+More detailed documentation can be found in
+Documentation/devicetree/bindings/media/video-interfaces.txt .
+
+
+Mandatory properties
+--------------------
+
+- compatible: "nokia,smia"
+- reg: I2C address (0x10, or an alternative address)
+- vana-supply: Analogue voltage supply (VANA), typically 2,8 volts (sensor
+ dependent).
+- clocks: External clock to the sensor
+- clock-frequency: Frequency of the external clock to the sensor
+- link-frequencies: List of allowed data link frequencies. An array of
+ 64-bit elements.
+
+
+Optional properties
+-------------------
+
+- nokia,nvm-size: The size of the NVM, in bytes. If the size is not given,
+ the NVM contents will not be read.
+- reset-gpios: XSHUTDOWN GPIO
+
+
+Endpoint node mandatory properties
+----------------------------------
+
+- clock-lanes: <0>
+- data-lanes: <1..n>
+- remote-endpoint: A phandle to the bus receiver's endpoint node.
+
+
+Example
+-------
+
+&i2c2 {
+ clock-frequency = <400000>;
+
+ smiapp_1: camera@10 {
+ compatible = "nokia,smia";
+ reg = <0x10>;
+ reset-gpios = <&gpio3 20 0>;
+ vana-supply = <&vaux3>;
+ clocks = <&omap3_isp 0>;
+ clock-frequency = <9600000>;
+ nokia,nvm-size = <512>; /* 8 * 64 */
+ link-frequencies = /bits/ 64 <199200000 210000000 499200000>;
+ port {
+ smiapp_1_1: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ remote-endpoint = <&csi2a_ep>;
+ };
+ };
+ };
+};
F: drivers/media/i2c/smiapp-pll.c
F: drivers/media/i2c/smiapp-pll.h
F: include/uapi/linux/smiapp.h
+F: Documentation/devicetree/bindings/media/i2c/nokia,smia.txt
SMM665 HARDWARE MONITOR DRIVER
M: Guenter Roeck <linux@roeck-us.net>