#include <linux/module.h>
#include <linux/kernel.h>
-//#include <linux/config.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/netdevice.h>
#include <linux/pci.h>
-//#include <linux/usb.h>
#include <linux/etherdevice.h>
#include <linux/delay.h>
#include <linux/rtnetlink.h> //for rtnl_lock()
#define COMP_EVENTS BIT19 // Event handling
#define COMP_RF BIT20 // For RF.
-//1!!!!!!!!!!!!!!!!!!!!!!!!!!!
-//1//1Attention Please!!!<11n or 8190 specific code should be put below this line>
-//1!!!!!!!!!!!!!!!!!!!!!!!!!!!
+
+/* 11n or 8190 specific code should be put below this line */
+
#define COMP_FIRMWARE BIT21 //for firmware downloading
#define COMP_HT BIT22 // For 802.11n HT related information. by Emily 2006-8-11
#define MAX_FIRMWARE_INFORMATION_SIZE 32 /*2006/04/30 by Emily forRTL8190*/
#define MAX_802_11_HEADER_LENGTH (40 + MAX_FIRMWARE_INFORMATION_SIZE)
#define ENCRYPTION_MAX_OVERHEAD 128
-//#define USB_HWDESC_HEADER_LEN sizeof(tx_desc_819x_usb)
-//#define TX_PACKET_SHIFT_BYTES (USB_HWDESC_HEADER_LEN + sizeof(tx_fwinfo_819x_usb))
#define MAX_FRAGMENT_COUNT 8
#define MAX_TRANSMIT_BUFFER_SIZE (1600+(MAX_802_11_HEADER_LENGTH+ENCRYPTION_MAX_OVERHEAD)*MAX_FRAGMENT_COUNT)
u8 firmware_buf[MAX_FW_INIT_STEP][RTL8190_MAX_FIRMWARE_CODE_SIZE];
u16 firmware_buf_size[MAX_FW_INIT_STEP];
}rt_firmware, *prt_firmware;
-//+by amy 080507
+
#define MAX_RECEIVE_BUFFER_SIZE 9100 // Add this to 9100 bytes to receive A-MSDU from RT-AP
/* Firmware Queue Layout */
#define RSVD_FW_QUEUE_PAGE_BCN_SHIFT 0x00
#define RSVD_FW_QUEUE_PAGE_PUB_SHIFT 0x08
-//8187B Security
-//#define RWCAM 0xA0 // Software read/write CAM config
-//#define WCAMI 0xA4 // Software write CAM input content
-//#define RCAMO 0xA8 // Output value from CAM according to 0xa0 setting
#define DCAM 0xAC // Debug CAM Interface
#define AESMSK_FC 0xB2 // AES Mask register for frame control (0xB2~0xB3). Added by Annie, 2006-03-06.
#define CAM_CONTENT_COUNT 8
-//#define CFG_DEFAULT_KEY BIT5
#define CFG_VALID BIT15
-#if 0
-//----------------------------------------------------------------------------
-// 8187B WPA Config Register (offset 0xb0, 1 byte)
-//----------------------------------------------------------------------------
-#define SCR_UseDK 0x01
-#define SCR_TxSecEnable 0x02
-#define SCR_RxSecEnable 0x04
-
-//----------------------------------------------------------------------------
-// 8187B CAM Config Setting (offset 0xb0, 1 byte)
-//----------------------------------------------------------------------------
-#define CAM_VALID 0x8000
-#define CAM_NOTVALID 0x0000
-#define CAM_USEDK 0x0020
-
-
-#define CAM_NONE 0x0
-#define CAM_WEP40 0x01
-#define CAM_TKIP 0x02
-#define CAM_AES 0x04
-#define CAM_WEP104 0x05
-
-//#define CAM_SIZE 16
-#define TOTAL_CAM_ENTRY 16
-#define CAM_ENTRY_LEN_IN_DW 6 // 6, unit: in u4byte. Added by Annie, 2006-05-25.
-#define CAM_ENTRY_LEN_IN_BYTE (CAM_ENTRY_LEN_IN_DW*sizeof(u32)) // 24, unit: in u1byte. Added by Annie, 2006-05-25.
-
-#define CAM_CONFIG_USEDK 1
-#define CAM_CONFIG_NO_USEDK 0
-
-#define CAM_WRITE 0x00010000
-#define CAM_READ 0x00000000
-#define CAM_POLLINIG 0x80000000
-
-//=================================================================
-//=================================================================
-
-#endif
#define EPROM_93c46 0
#define EPROM_93c56 1
unsigned char buf[0xff];
}rtl_reg_debug;
-#if 0
-
-typedef struct tx_pendingbuf
-{
- struct ieee80211_txb *txb;
- short ispending;
- short descfrag;
-} tx_pendigbuf;
-
-#endif
-
typedef struct _rt_9x_tx_rate_history {
u32 cck[4];
u32 ofdm[8];
{
unsigned long txrdu;
unsigned long rxrdu;
- //unsigned long rxnolast;
- //unsigned long rxnodata;
-// unsigned long rxreset;
-// unsigned long rxnopointer;
unsigned long rxok;
unsigned long rxframgment;
unsigned long rxcmdpkt[4]; //08/05/08 amy rx cmd element txfeedback/bcn report/cfg set/query
unsigned long txnperr;
unsigned long txnpdrop;
unsigned long txresumed;
-// unsigned long rxerr;
unsigned long rxoverflow;
unsigned long rxint;
unsigned long txnpokint;
-// unsigned long txhpokint;
-// unsigned long txhperr;
unsigned long ints;
unsigned long shints;
unsigned long txoverflow;
-// unsigned long rxdmafail;
-// unsigned long txbeacon;
-// unsigned long txbeaconerr;
unsigned long txlpokint;
unsigned long txlpdrop;
unsigned long txlperr;
u32 Slide_Beacon_Total; //cosa add for beacon rssi
RT_SMOOTH_DATA_4RF cck_adc_pwdb;
u32 CurrentShowTxate;
-
-
} Stats;
#define HAL_PRIME_CHNL_OFFSET_LOWER 1
#define HAL_PRIME_CHNL_OFFSET_UPPER 2
-//+by amy 080507
-
typedef struct ChnlAccessSetting {
u16 SIFS_Timer;
u16 DIFS_Timer;
RT_CID_COREGA = 14,
}RT_CUSTOMER_ID, *PRT_CUSTOMER_ID;
-//================================================================================
-// LED customization.
-//================================================================================
+/* LED customization. */
typedef enum _LED_STRATEGY_8190{
SW_LED_MODE0, // SW control 1 LED via GPIO0. It is default option.
struct work_struct reset_wq;
-/**********************************************************/
//for rtl819xPci
// Data Rate Config. Added by Annie, 2006-04-13.
u16 basic_rate;
struct workqueue_struct *priv_wq;
}r8192_priv;
-// for rtl8187
-// now mirging to rtl8187B
-/*
-typedef enum{
- LOW_PRIORITY = 0x02,
- NORM_PRIORITY
- } priority_t;
-*/
-//for rtl8187B
-#if 0
-typedef enum{
- BULK_PRIORITY = 0x01,
- //RSVD0,
- //RSVD1,
- LOW_PRIORITY,
- NORM_PRIORITY,
- VO_PRIORITY,
- VI_PRIORITY, //0x05
- BE_PRIORITY,
- BK_PRIORITY,
- CMD_PRIORITY,//0x8
- RSVD3,
- BEACON_PRIORITY, //0x0A
- HIGH_PRIORITY,
- MANAGE_PRIORITY,
- RSVD4,
- RSVD5,
- UART_PRIORITY //0x0F
-} priority_t;
-#endif
typedef enum{
NIC_8192E = 1,
- } nic_t;
-
-
-#if 0 //defined in Qos.h
-//typedef u32 AC_CODING;
-#define AC0_BE 0 // ACI: 0x00 // Best Effort
-#define AC1_BK 1 // ACI: 0x01 // Background
-#define AC2_VI 2 // ACI: 0x10 // Video
-#define AC3_VO 3 // ACI: 0x11 // Voice
-#define AC_MAX 4 // Max: define total number; Should not to be used as a real enum.
-
-//
-// ECWmin/ECWmax field.
-// Ref: WMM spec 2.2.2: WME Parameter Element, p.13.
-//
-typedef union _ECW{
- u8 charData;
- struct
- {
- u8 ECWmin:4;
- u8 ECWmax:4;
- }f; // Field
-}ECW, *PECW;
-
-//
-// ACI/AIFSN Field.
-// Ref: WMM spec 2.2.2: WME Parameter Element, p.12.
-//
-typedef union _ACI_AIFSN{
- u8 charData;
-
- struct
- {
- u8 AIFSN:4;
- u8 ACM:1;
- u8 ACI:2;
- u8 Reserved:1;
- }f; // Field
-}ACI_AIFSN, *PACI_AIFSN;
+} nic_t;
-//
-// AC Parameters Record Format.
-// Ref: WMM spec 2.2.2: WME Parameter Element, p.12.
-//
-typedef union _AC_PARAM{
- u32 longData;
- u8 charData[4];
-
- struct
- {
- ACI_AIFSN AciAifsn;
- ECW Ecw;
- u16 TXOPLimit;
- }f; // Field
-}AC_PARAM, *PAC_PARAM;
-
-#endif
bool init_firmware(struct net_device *dev);
short rtl8192_tx(struct net_device *dev, struct sk_buff* skb);
u32 read_cam(struct net_device *dev, u8 addr);
void rtl8192_tx_enable(struct net_device *);
void rtl8192_disassociate(struct net_device *dev);
-//void fix_rx_fifo(struct net_device *dev);
void rtl8185_set_rf_pins_enable(struct net_device *dev,u32 a);
void rtl8192_set_anaparam(struct net_device *dev,u32 a);
void write_phy_ofdm(struct net_device *dev, u8 adr, u32 data);
void rtl8185_tx_antenna(struct net_device *dev, u8 ant);
void rtl8187_set_rxconf(struct net_device *dev);
-//short check_nic_enough_desc(struct net_device *dev, priority_t priority);
void CamResetAllEntry(struct net_device* dev);
void EnableHWSecurityConfig8192(struct net_device *dev);
void setKey(struct net_device *dev, u8 EntryNo, u8 KeyIndex, u16 KeyType, const u8 *MacAddr, u8 DefaultKey, u32 *KeyContent );
projects / GitHub / MotorolaMobilityLLC / kernel-slsi.git / commitdiff