udelay(100);
if (tulip_debug > 1)
- netdev_dbg(dev, "tulip_up(), irq==%d\n", dev->irq);
+ netdev_dbg(dev, "tulip_up(), irq==%d\n", tp->pdev->irq);
iowrite32(tp->rx_ring_dma, ioaddr + CSR3);
iowrite32(tp->tx_ring_dma, ioaddr + CSR4);
static int
tulip_open(struct net_device *dev)
{
+ struct tulip_private *tp = netdev_priv(dev);
int retval;
tulip_init_ring (dev);
- retval = request_irq(dev->irq, tulip_interrupt, IRQF_SHARED, dev->name, dev);
+ retval = request_irq(tp->pdev->irq, tulip_interrupt, IRQF_SHARED,
+ dev->name, dev);
if (retval)
goto free_ring;
netdev_dbg(dev, "Shutting down ethercard, status was %02x\n",
ioread32 (ioaddr + CSR5));
- free_irq (dev->irq, dev);
+ free_irq (tp->pdev->irq, dev);
tulip_free_ring (dev);
INIT_WORK(&tp->media_work, tulip_tbl[tp->chip_id].media_task);
- dev->base_addr = (unsigned long)ioaddr;
-
#ifdef CONFIG_TULIP_MWI
if (!force_csr0 && (tp->flags & HAS_PCI_MWI))
tulip_mwi_config (pdev, dev);
for (i = 0; i < 6; i++)
last_phys_addr[i] = dev->dev_addr[i];
last_irq = irq;
- dev->irq = irq;
/* The lower four bits are the media type. */
if (board_idx >= 0 && board_idx < MAX_UNITS) {
tulip_down(dev);
netif_device_detach(dev);
- free_irq(dev->irq, dev);
+ /* FIXME: it needlessly adds an error path. */
+ free_irq(tp->pdev->irq, dev);
save_state:
pci_save_state(pdev);
return retval;
}
- if ((retval = request_irq(dev->irq, tulip_interrupt, IRQF_SHARED, dev->name, dev))) {
+ retval = request_irq(pdev->irq, tulip_interrupt, IRQF_SHARED,
+ dev->name, dev);
+ if (retval) {
pr_err("request_irq failed in resume\n");
return retval;
}
static void poll_tulip (struct net_device *dev)
{
+ struct tulip_private *tp = netdev_priv(dev);
+ const int irq = tp->pdev->irq;
+
/* disable_irq here is not very nice, but with the lockless
interrupt handler we have no other choice. */
- disable_irq(dev->irq);
- tulip_interrupt (dev->irq, dev);
- enable_irq(dev->irq);
+ disable_irq(irq);
+ tulip_interrupt (irq, dev);
+ enable_irq(irq);
}
#endif