arcnet: com90xx: Use arcnet_readb/writeb routines

Simplify and make consistent the current uses of readb/writeb
by using the newly introduced arcnet_<I/O> equivalents.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>

diff --git a/drivers/net/arcnet/com90xx.c b/drivers/net/arcnet/com90xx.c
index f1cfeb0e134328da0a8bdc17759bcb55cdf58a9e..a97d086a8f51118adab22a4e8133147264af0c94 100644 (file)
--- a/drivers/net/arcnet/com90xx.c
+++ b/drivers/net/arcnet/com90xx.c
@@ -88,6 +88,8 @@ static int numcards;
 #define COM9026_REG_W_ADDR_LO  14      /* Control registers for said */
 #define COM9026_REG_W_ADDR_HI  15
 
+#define COM9026_REG_R_STATION  1       /* Station ID */
+
 static int com90xx_skip_probe __initdata = 0;
 
 /* Module parameters */
@@ -239,9 +241,10 @@ static void __init com90xx_probe(void)
                                numprint = 0;
                        goto out1;
                }
-               if (readb(base) != TESTvalue) {
+               if (arcnet_readb(base, COM9026_REG_R_STATUS) != TESTvalue) {
                        arc_cont(D_INIT_REASONS, "(%02Xh != %02Xh)\n",
-                                readb(base), TESTvalue);
+                                arcnet_readb(base, COM9026_REG_R_STATUS),
+                                TESTvalue);
                        arc_cont(D_INIT_REASONS, "S3: ");
                        if (BUGLVL(D_INIT_REASONS))
                                numprint = 0;
@@ -252,8 +255,8 @@ static void __init com90xx_probe(void)
                 * in another pass through this loop, they will be discarded
                 * because *cptr != TESTvalue.
                 */
-               writeb(0x42, base);
-               if (readb(base) != 0x42) {
+               arcnet_writeb(0x42, base, COM9026_REG_W_INTMASK);
+               if (arcnet_readb(base, COM9026_REG_R_STATUS) != 0x42) {
                        arc_cont(D_INIT_REASONS, "(read only)\n");
                        arc_cont(D_INIT_REASONS, "S3: ");
                        goto out2;
@@ -384,7 +387,8 @@ static void __init com90xx_probe(void)
                        mdelay(RESETtime);
                } else {
                        /* just one shmem and port, assume they match */
-                       writeb(TESTvalue, iomem[0]);
+                       arcnet_writeb(TESTvalue, iomem[0],
+                                     COM9026_REG_W_INTMASK);
                }
 #else
                arcnet_inb(ioaddr, COM9026_REG_R_RESET);
@@ -395,7 +399,7 @@ static void __init com90xx_probe(void)
                        u_long ptr = shmems[index];
                        void __iomem *base = iomem[index];
 
-                       if (readb(base) == TESTvalue) { /* found one */
+                       if (arcnet_readb(base, COM9026_REG_R_STATUS) == TESTvalue) {    /* found one */
                                arc_cont(D_INIT, "%lXh)\n", *p);
                                openparen = 0;
 
@@ -409,7 +413,8 @@ static void __init com90xx_probe(void)
                                iomem[index] = iomem[numshmems];
                                break;  /* go to the next I/O port */
                        } else {
-                               arc_cont(D_INIT_REASONS, "%Xh-", readb(base));
+                               arc_cont(D_INIT_REASONS, "%Xh-",
+                                        arcnet_readb(base, COM9026_REG_R_STATUS));
                        }
                }
 
@@ -431,7 +436,7 @@ static void __init com90xx_probe(void)
 
        /* Now put back TESTvalue on all leftover shmems. */
        for (index = 0; index < numshmems; index++) {
-               writeb(TESTvalue, iomem[index]);
+               arcnet_writeb(TESTvalue, iomem[index], COM9026_REG_W_INTMASK);
                iounmap(iomem[index]);
                release_mem_region(shmems[index], MIRROR_SIZE);
        }
@@ -449,7 +454,7 @@ static int check_mirror(unsigned long addr, size_t size)
 
        p = ioremap(addr, size);
        if (p) {
-               if (readb(p) == TESTvalue)
+               if (arcnet_readb(p, COM9026_REG_R_STATUS) == TESTvalue)
                        res = 1;
                else
                        res = 0;
@@ -487,7 +492,7 @@ static int __init com90xx_found(int ioaddr, int airq, u_long shmem,
         * 2k (or there are no mirrors at all) but on some, it's 4k.
         */
        mirror_size = MIRROR_SIZE;
-       if (readb(p) == TESTvalue &&
+       if (arcnet_readb(p, COM9026_REG_R_STATUS) == TESTvalue &&
            check_mirror(shmem - MIRROR_SIZE, MIRROR_SIZE) == 0 &&
            check_mirror(shmem - 2 * MIRROR_SIZE, MIRROR_SIZE) == 1)
                mirror_size = 2 * MIRROR_SIZE;
@@ -537,7 +542,7 @@ static int __init com90xx_found(int ioaddr, int airq, u_long shmem,
        }
 
        /* get and check the station ID from offset 1 in shmem */
-       dev->dev_addr[0] = readb(lp->mem_start + 1);
+       dev->dev_addr[0] = arcnet_readb(lp->mem_start, COM9026_REG_R_STATION);
 
        dev->base_addr = ioaddr;
 
@@ -616,7 +621,7 @@ static int com90xx_reset(struct net_device *dev, int really_reset)
 #endif
 
        /* verify that the ARCnet signature byte is present */
-       if (readb(lp->mem_start) != TESTvalue) {
+       if (arcnet_readb(lp->mem_start, COM9026_REG_R_STATUS) != TESTvalue) {
                if (really_reset)
                        arc_printk(D_NORMAL, dev, "reset failed: TESTvalue not present.\n");
                return 1;