Resolve the following warnings from smatch:
arch/arm/mach-omap2/gpmc.c:282 gpmc_cs_set_timings() info: why not propagate 'div' from gpmc_cs_calc_divider() instead of -1?
arch/arm/mach-omap2/serial.c:328 omap_serial_init_port() error: 'pdev' dereferencing possible ERR_PTR()
arch/arm/mach-omap2/timer.c:213 omap2_gp_clockevent_init() Error invalid range 4096 to -1
arch/arm/mach-omap2/gpio.c:63 omap2_gpio_dev_init() warn: possible memory leak of 'pdata'
arch/arm/mach-omap2/omap_hwmod.c:1478 _assert_hardreset() warn: assigning -22 to unsigned variable 'ret'
arch/arm/mach-omap2/omap_hwmod.c:1487 _assert_hardreset() warn:
4294963201 is more than 255 (max '(ret)' can be) so this is always the same.
arch/arm/mach-omap2/omap_hwmod.c:1545 _read_hardreset() warn: assigning -22 to unsigned variable 'ret'
arch/arm/mach-omap2/omap_hwmod.c:1554 _read_hardreset() warn:
4294963201 is more than 255 (max '(ret)' can be) so this is always the same.
arch/arm/mach-omap2/dpll3xxx.c:629 omap3_clkoutx2_recalc() error: we previously assumed 'pclk' could be null (see line 627)
arch/arm/mach-omap2/board-n8x0.c:422 n8x0_mmc_late_init() Error invalid range 14 to 13
arch/arm/mach-omap1/leds-h2p2-debug.c:71 h2p2_dbg_leds_event() error: potentially derefencing uninitialized 'fpga'.
arch/arm/plat-omap/mux.c:79 omap_cfg_reg() Error invalid range 4096 to -1
Thanks to Tony Lindgren <tony@atomide.com> for pointing out that BUG()
can be disabled. The changes in the first version that removed the
subsequent return() after BUG() states have been dropped.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Tony Lindgren <tony@atomide.com>
gpio_set_value(GPIO_IDLE, 0);
}
- __raw_writew(~0, &fpga->leds);
led_state &= ~LED_STATE_ENABLED;
- if (evt == led_halted) {
- iounmap(fpga);
- fpga = NULL;
+ if (fpga) {
+ __raw_writew(~0, &fpga->leds);
+ if (evt == led_halted) {
+ iounmap(fpga);
+ fpga = NULL;
+ }
}
goto done;
/*
* Actually burn the LEDs
*/
- if (led_state & LED_STATE_ENABLED)
+ if (led_state & LED_STATE_ENABLED && fpga)
__raw_writew(~hw_led_state, &fpga->leds);
done:
while (pclk && !pclk->dpll_data)
pclk = pclk->parent;
- /* clk does not have a DPLL as a parent? */
- WARN_ON(!pclk);
+ /* clk does not have a DPLL as a parent? error in the clock data */
+ if (!pclk) {
+ WARN_ON(1);
+ return 0;
+ }
dd = pclk->dpll_data;
pdata->regs = kzalloc(sizeof(struct omap_gpio_reg_offs), GFP_KERNEL);
if (!pdata->regs) {
pr_err("gpio%d: Memory allocation failed\n", id);
+ kfree(pdata);
return -ENOMEM;
}
div = gpmc_cs_calc_divider(cs, t->sync_clk);
if (div < 0)
- return -1;
+ return div;
GPMC_SET_ONE(GPMC_CS_CONFIG2, 0, 3, cs_on);
GPMC_SET_ONE(GPMC_CS_CONFIG2, 8, 12, cs_rd_off);
* Return the bit position of the reset line that match the
* input name. Return -ENOENT if not found.
*/
-static u8 _lookup_hardreset(struct omap_hwmod *oh, const char *name,
- struct omap_hwmod_rst_info *ohri)
+static int _lookup_hardreset(struct omap_hwmod *oh, const char *name,
+ struct omap_hwmod_rst_info *ohri)
{
int i;
static int _assert_hardreset(struct omap_hwmod *oh, const char *name)
{
struct omap_hwmod_rst_info ohri;
- u8 ret = -EINVAL;
+ int ret = -EINVAL;
if (!oh)
return -EINVAL;
return -ENOSYS;
ret = _lookup_hardreset(oh, name, &ohri);
- if (IS_ERR_VALUE(ret))
+ if (ret < 0)
return ret;
ret = soc_ops.assert_hardreset(oh, &ohri);
static int _read_hardreset(struct omap_hwmod *oh, const char *name)
{
struct omap_hwmod_rst_info ohri;
- u8 ret = -EINVAL;
+ int ret = -EINVAL;
if (!oh)
return -EINVAL;
return -ENOSYS;
ret = _lookup_hardreset(oh, name, &ohri);
- if (IS_ERR_VALUE(ret))
+ if (ret < 0)
return ret;
return soc_ops.is_hardreset_asserted(oh, &ohri);
pdev = omap_device_build(name, uart->num, oh, pdata, pdata_size,
NULL, 0, false);
- WARN(IS_ERR(pdev), "Could not build omap_device for %s: %s.\n",
- name, oh->name);
+ if (IS_ERR(pdev)) {
+ WARN(1, "Could not build omap_device for %s: %s.\n", name,
+ oh->name);
+ return;
+ }
if ((console_uart_id == bdata->id) && no_console_suspend)
omap_device_disable_idle_on_suspend(pdev);
res = omap_dm_timer_init_one(&clkev, gptimer_id, fck_source);
BUG_ON(res);
- omap2_gp_timer_irq.dev_id = (void *)&clkev;
+ omap2_gp_timer_irq.dev_id = &clkev;
setup_irq(clkev.irq, &omap2_gp_timer_irq);
__omap_dm_timer_int_enable(&clkev, OMAP_TIMER_INT_OVERFLOW);
return -ENODEV;
}
- reg = (struct pin_config *)&mux_cfg->pins[index];
+ reg = &mux_cfg->pins[index];
if (!mux_cfg->cfg_reg)
return -ENODEV;