-Intel P-state driver
+Intel P-State driver
--------------------
-This driver provides an interface to control the P state selection for
-SandyBridge+ Intel processors. The driver can operate two different
-modes based on the processor model, legacy mode and Hardware P state (HWP)
-mode.
-
-In legacy mode, the Intel P-state implements two internal governors,
-performance and powersave, that differ from the general cpufreq governors of
-the same name (the general cpufreq governors implement target(), whereas the
-internal Intel P-state governors implement setpolicy()). The internal
-performance governor sets the max_perf_pct and min_perf_pct to 100; that is,
-the governor selects the highest available P state to maximize the performance
-of the core. The internal powersave governor selects the appropriate P state
-based on the current load on the CPU.
-
-In HWP mode P state selection is implemented in the processor
-itself. The driver provides the interfaces between the cpufreq core and
-the processor to control P state selection based on user preferences
-and reporting frequency to the cpufreq core. In this mode the
-internal Intel P-state governor code is disabled.
-
-In addition to the interfaces provided by the cpufreq core for
-controlling frequency the driver provides sysfs files for
-controlling P state selection. These files have been added to
-/sys/devices/system/cpu/intel_pstate/
-
- max_perf_pct: limits the maximum P state that will be requested by
- the driver stated as a percentage of the available performance. The
- available (P states) performance may be reduced by the no_turbo
+This driver provides an interface to control the P-State selection for the
+SandyBridge+ Intel processors.
+
+The following document explains P-States:
+http://events.linuxfoundation.org/sites/events/files/slides/LinuxConEurope_2015.pdf
+As stated in the document, P-State doesn’t exactly mean a frequency. However, for
+the sake of the relationship with cpufreq, P-State and frequency are used
+interchangeably.
+
+Understanding the cpufreq core governors and policies are important before
+discussing more details about the Intel P-State driver. Based on what callbacks
+a cpufreq driver provides to the cpufreq core, it can support two types of
+drivers:
+- with target_index() callback: In this mode, the drivers using cpufreq core
+simply provide the minimum and maximum frequency limits and an additional
+interface target_index() to set the current frequency. The cpufreq subsystem
+has a number of scaling governors ("performance", "powersave", "ondemand",
+etc.). Depending on which governor is in use, cpufreq core will call for
+transitions to a specific frequency using target_index() callback.
+- setpolicy() callback: In this mode, drivers do not provide target_index()
+callback, so cpufreq core can't request a transition to a specific frequency.
+The driver provides minimum and maximum frequency limits and callbacks to set a
+policy. The policy in cpufreq sysfs is referred to as the "scaling governor".
+The cpufreq core can request the driver to operate in any of the two policies:
+"performance: and "powersave". The driver decides which frequency to use based
+on the above policy selection considering minimum and maximum frequency limits.
+
+The Intel P-State driver falls under the latter category, which implements the
+setpolicy() callback. This driver decides what P-State to use based on the
+requested policy from the cpufreq core. If the processor is capable of
+selecting its next P-State internally, then the driver will offload this
+responsibility to the processor (aka HWP: Hardware P-States). If not, the
+driver implements algorithms to select the next P-State.
+
+Since these policies are implemented in the driver, they are not same as the
+cpufreq scaling governors implementation, even if they have the same name in
+the cpufreq sysfs (scaling_governors). For example the "performance" policy is
+similar to cpufreq’s "performance" governor, but "powersave" is completely
+different than the cpufreq "powersave" governor. The strategy here is similar
+to cpufreq "ondemand", where the requested P-State is related to the system load.
+
+Sysfs Interface
+
+In addition to the frequency-controlling interfaces provided by the cpufreq
+core, the driver provides its own sysfs files to control the P-State selection.
+These files have been added to /sys/devices/system/cpu/intel_pstate/.
+Any changes made to these files are applicable to all CPUs (even in a
+multi-package system).
+
+ max_perf_pct: Limits the maximum P-State that will be requested by
+ the driver. It states it as a percentage of the available performance. The
+ available (P-State) performance may be reduced by the no_turbo
setting described below.
- min_perf_pct: limits the minimum P state that will be requested by
- the driver stated as a percentage of the max (non-turbo)
+ min_perf_pct: Limits the minimum P-State that will be requested by
+ the driver. It states it as a percentage of the max (non-turbo)
performance level.
- no_turbo: limits the driver to selecting P states below the turbo
+ no_turbo: Limits the driver to selecting P-State below the turbo
frequency range.
- turbo_pct: displays the percentage of the total performance that
- is supported by hardware that is in the turbo range. This number
+ turbo_pct: Displays the percentage of the total performance that
+ is supported by hardware that is in the turbo range. This number
is independent of whether turbo has been disabled or not.
- num_pstates: displays the number of pstates that are supported
- by hardware. This number is independent of whether turbo has
+ num_pstates: Displays the number of P-States that are supported
+ by hardware. This number is independent of whether turbo has
been disabled or not.
+For example, if a system has these parameters:
+ Max 1 core turbo ratio: 0x21 (Max 1 core ratio is the maximum P-State)
+ Max non turbo ratio: 0x17
+ Minimum ratio : 0x08 (Here the ratio is called max efficiency ratio)
+
+Sysfs will show :
+ max_perf_pct:100, which corresponds to 1 core ratio
+ min_perf_pct:24, max_efficiency_ratio / max 1 Core ratio
+ no_turbo:0, turbo is not disabled
+ num_pstates:26 = (max 1 Core ratio - Max Efficiency Ratio + 1)
+ turbo_pct:39 = (max 1 core ratio - max non turbo ratio) / num_pstates
+
+Refer to "Intel® 64 and IA-32 Architectures Software Developer’s Manual
+Volume 3: System Programming Guide" to understand ratios.
+
+cpufreq sysfs for Intel P-State
+
+Since this driver registers with cpufreq, cpufreq sysfs is also presented.
+There are some important differences, which need to be considered.
+
+scaling_cur_freq: This displays the real frequency which was used during
+the last sample period instead of what is requested. Some other cpufreq driver,
+like acpi-cpufreq, displays what is requested (Some changes are on the
+way to fix this for acpi-cpufreq driver). The same is true for frequencies
+displayed at /proc/cpuinfo.
+
+scaling_governor: This displays current active policy. Since each CPU has a
+cpufreq sysfs, it is possible to set a scaling governor to each CPU. But this
+is not possible with Intel P-States, as there is one common policy for all
+CPUs. Here, the last requested policy will be applicable to all CPUs. It is
+suggested that one use the cpupower utility to change policy to all CPUs at the
+same time.
+
+scaling_setspeed: This attribute can never be used with Intel P-State.
+
+scaling_max_freq/scaling_min_freq: This interface can be used similarly to
+the max_perf_pct/min_perf_pct of Intel P-State sysfs. However since frequencies
+are converted to nearest possible P-State, this is prone to rounding errors.
+This method is not preferred to limit performance.
+
+affected_cpus: Not used
+related_cpus: Not used
+
For contemporary Intel processors, the frequency is controlled by the
-processor itself and the P-states exposed to software are related to
+processor itself and the P-State exposed to software is related to
performance levels. The idea that frequency can be set to a single
-frequency is fiction for Intel Core processors. Even if the scaling
-driver selects a single P state the actual frequency the processor
+frequency is fictional for Intel Core processors. Even if the scaling
+driver selects a single P-State, the actual frequency the processor
will run at is selected by the processor itself.
-For legacy mode debugfs files have also been added to allow tuning of
-the internal governor algorythm. These files are located at
-/sys/kernel/debug/pstate_snb/ These files are NOT present in HWP mode.
+Tuning Intel P-State driver
+
+When HWP mode is not used, debugfs files have also been added to allow the
+tuning of the internal governor algorithm. These files are located at
+/sys/kernel/debug/pstate_snb/. The algorithm uses a PID (Proportional
+Integral Derivative) controller. The PID tunable parameters are:
deadband
d_gain_pct
p_gain_pct
sample_rate_ms
setpoint
+
+To adjust these parameters, some understanding of driver implementation is
+necessary. There are some tweeks described here, but be very careful. Adjusting
+them requires expert level understanding of power and performance relationship.
+These limits are only useful when the "powersave" policy is active.
+
+-To make the system more responsive to load changes, sample_rate_ms can
+be adjusted (current default is 10ms).
+-To make the system use higher performance, even if the load is lower, setpoint
+can be adjusted to a lower number. This will also lead to faster ramp up time
+to reach the maximum P-State.
+If there are no derivative and integral coefficients, The next P-State will be
+equal to:
+ current P-State - ((setpoint - current cpu load) * p_gain_pct)
+
+For example, if the current PID parameters are (Which are defaults for the core
+processors like SandyBridge):
+ deadband = 0
+ d_gain_pct = 0
+ i_gain_pct = 0
+ p_gain_pct = 20
+ sample_rate_ms = 10
+ setpoint = 97
+
+If the current P-State = 0x08 and current load = 100, this will result in the
+next P-State = 0x08 - ((97 - 100) * 0.2) = 8.6 (rounded to 9). Here the P-State
+goes up by only 1. If during next sample interval the current load doesn't
+change and still 100, then P-State goes up by one again. This process will
+continue as long as the load is more than the setpoint until the maximum P-State
+is reached.
+
+For the same load at setpoint = 60, this will result in the next P-State
+= 0x08 - ((60 - 100) * 0.2) = 16
+So by changing the setpoint from 97 to 60, there is an increase of the
+next P-State from 9 to 16. So this will make processor execute at higher
+P-State for the same CPU load. If the load continues to be more than the
+setpoint during next sample intervals, then P-State will go up again till the
+maximum P-State is reached. But the ramp up time to reach the maximum P-State
+will be much faster when the setpoint is 60 compared to 97.
+
+Debugging Intel P-State driver
+
+Event tracing
+To debug P-State transition, the Linux event tracing interface can be used.
+There are two specific events, which can be enabled (Provided the kernel
+configs related to event tracing are enabled).
+
+# cd /sys/kernel/debug/tracing/
+# echo 1 > events/power/pstate_sample/enable
+# echo 1 > events/power/cpu_frequency/enable
+# cat trace
+gnome-terminal--4510 [001] ..s. 1177.680733: pstate_sample: core_busy=107
+ scaled=94 from=26 to=26 mperf=1143818 aperf=1230607 tsc=29838618
+ freq=2474476
+cat-5235 [002] ..s. 1177.681723: cpu_frequency: state=2900000 cpu_id=2
+
+
+Using ftrace
+
+If function level tracing is required, the Linux ftrace interface can be used.
+For example if we want to check how often a function to set a P-State is
+called, we can set ftrace filter to intel_pstate_set_pstate.
+
+# cd /sys/kernel/debug/tracing/
+# cat available_filter_functions | grep -i pstate
+intel_pstate_set_pstate
+intel_pstate_cpu_init
+...
+
+# echo intel_pstate_set_pstate > set_ftrace_filter
+# echo function > current_tracer
+# cat trace | head -15
+# tracer: function
+#
+# entries-in-buffer/entries-written: 80/80 #P:4
+#
+# _-----=> irqs-off
+# / _----=> need-resched
+# | / _---=> hardirq/softirq
+# || / _--=> preempt-depth
+# ||| / delay
+# TASK-PID CPU# |||| TIMESTAMP FUNCTION
+# | | | |||| | |
+ Xorg-3129 [000] ..s. 2537.644844: intel_pstate_set_pstate <-intel_pstate_timer_func
+ gnome-terminal--4510 [002] ..s. 2537.649844: intel_pstate_set_pstate <-intel_pstate_timer_func
+ gnome-shell-3409 [001] ..s. 2537.650850: intel_pstate_set_pstate <-intel_pstate_timer_func
+ <idle>-0 [000] ..s. 2537.654843: intel_pstate_set_pstate <-intel_pstate_timer_func
projects / GitHub / LineageOS / G12 / android_kernel_amlogic_linux-4.9.git / commitdiff