mmc: sdhci-xenon: add runtime pm support and reimplement standby
authorZhoujie Wu <zjwu@marvell.com>
Tue, 29 Aug 2017 18:54:49 +0000 (11:54 -0700)
committerUlf Hansson <ulf.hansson@linaro.org>
Wed, 30 Aug 2017 13:37:31 +0000 (15:37 +0200)
Enable runtime pm support for xenon controller, which uses 50ms
auto runtime suspend by default.
Reimplement system standby based on runtime pm API.
Introduce restore_needed to restore the Xenon specific registers
when resume.

Signed-off-by: Zhoujie Wu <zjwu@marvell.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
drivers/mmc/host/sdhci-xenon.c
drivers/mmc/host/sdhci-xenon.h

index 306ffaf7a5b2eb8408cbb8fd9275883ce9517f0f..2eec2e652c53da9c1f0b9c6156dcdc9778d82d68 100644 (file)
@@ -18,6 +18,8 @@
 #include <linux/ktime.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
 
 #include "sdhci-pltfm.h"
 #include "sdhci-xenon.h"
@@ -506,13 +508,24 @@ static int xenon_probe(struct platform_device *pdev)
        if (err)
                goto err_clk;
 
+       pm_runtime_get_noresume(&pdev->dev);
+       pm_runtime_set_active(&pdev->dev);
+       pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
+       pm_runtime_use_autosuspend(&pdev->dev);
+       pm_runtime_enable(&pdev->dev);
+       pm_suspend_ignore_children(&pdev->dev, 1);
+
        err = sdhci_add_host(host);
        if (err)
                goto remove_sdhc;
 
+       pm_runtime_put_autosuspend(&pdev->dev);
+
        return 0;
 
 remove_sdhc:
+       pm_runtime_disable(&pdev->dev);
+       pm_runtime_put_noidle(&pdev->dev);
        xenon_sdhc_unprepare(host);
 err_clk:
        clk_disable_unprepare(pltfm_host->clk);
@@ -526,6 +539,10 @@ static int xenon_remove(struct platform_device *pdev)
        struct sdhci_host *host = platform_get_drvdata(pdev);
        struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 
+       pm_runtime_get_sync(&pdev->dev);
+       pm_runtime_disable(&pdev->dev);
+       pm_runtime_put_noidle(&pdev->dev);
+
        sdhci_remove_host(host, 0);
 
        xenon_sdhc_unprepare(host);
@@ -542,40 +559,78 @@ static int xenon_suspend(struct device *dev)
 {
        struct sdhci_host *host = dev_get_drvdata(dev);
        struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+       struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
        int ret;
 
-       ret = sdhci_suspend_host(host);
-       if (ret)
-               return ret;
+       ret = pm_runtime_force_suspend(dev);
 
-       clk_disable_unprepare(pltfm_host->clk);
+       priv->restore_needed = true;
        return ret;
 }
+#endif
 
-static int xenon_resume(struct device *dev)
+#ifdef CONFIG_PM
+static int xenon_runtime_suspend(struct device *dev)
 {
        struct sdhci_host *host = dev_get_drvdata(dev);
        struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+       struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
        int ret;
 
-       ret = clk_prepare_enable(pltfm_host->clk);
+       ret = sdhci_runtime_suspend_host(host);
        if (ret)
                return ret;
 
+       if (host->tuning_mode != SDHCI_TUNING_MODE_3)
+               mmc_retune_needed(host->mmc);
+
+       clk_disable_unprepare(pltfm_host->clk);
        /*
-        * If SoCs power off the entire Xenon, registers setting will
-        * be lost.
-        * Re-configure Xenon specific register to enable current SDHC
+        * Need to update the priv->clock here, or when runtime resume
+        * back, phy don't aware the clock change and won't adjust phy
+        * which will cause cmd err
         */
-       ret = xenon_sdhc_prepare(host);
-       if (ret)
+       priv->clock = 0;
+       return 0;
+}
+
+static int xenon_runtime_resume(struct device *dev)
+{
+       struct sdhci_host *host = dev_get_drvdata(dev);
+       struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+       struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+       int ret;
+
+       ret = clk_prepare_enable(pltfm_host->clk);
+       if (ret) {
+               dev_err(dev, "can't enable mainck\n");
                return ret;
+       }
 
-       return sdhci_resume_host(host);
-}
-#endif
+       if (priv->restore_needed) {
+               ret = xenon_sdhc_prepare(host);
+               if (ret)
+                       goto out;
+               priv->restore_needed = false;
+       }
 
-static SIMPLE_DEV_PM_OPS(xenon_pmops, xenon_suspend, xenon_resume);
+       ret = sdhci_runtime_resume_host(host);
+       if (ret)
+               goto out;
+       return 0;
+out:
+       clk_disable_unprepare(pltfm_host->clk);
+       return ret;
+}
+#endif /* CONFIG_PM */
+
+static const struct dev_pm_ops sdhci_xenon_dev_pm_ops = {
+       SET_SYSTEM_SLEEP_PM_OPS(xenon_suspend,
+                               pm_runtime_force_resume)
+       SET_RUNTIME_PM_OPS(xenon_runtime_suspend,
+                          xenon_runtime_resume,
+                          NULL)
+};
 
 static const struct of_device_id sdhci_xenon_dt_ids[] = {
        { .compatible = "marvell,armada-ap806-sdhci",},
@@ -589,7 +644,7 @@ static struct platform_driver sdhci_xenon_driver = {
        .driver = {
                .name   = "xenon-sdhci",
                .of_match_table = sdhci_xenon_dt_ids,
-               .pm = &xenon_pmops,
+               .pm = &sdhci_xenon_dev_pm_ops,
        },
        .probe  = xenon_probe,
        .remove = xenon_remove,
index 01937f1681b1aae6baff8bc80692b70c4639563e..2bc0510c07696a11015c8e3bcee8c3497bd67384 100644 (file)
@@ -91,6 +91,7 @@ struct xenon_priv {
         */
        void            *phy_params;
        struct xenon_emmc_phy_regs *emmc_phy_regs;
+       bool restore_needed;
 };
 
 int xenon_phy_adj(struct sdhci_host *host, struct mmc_ios *ios);