<item>"7,1"</item>
</string-array>
- <!-- Power Management: Specifies whether to decouple the interactive state of the
- device from the display on/off state. -->
- <bool name="config_powerDecoupleInteractiveModeFromDisplay">false</bool>
-
<!-- Screen brightness used to dim the screen while dozing in a very low power state.
May be less than the minimum allowed brightness setting
that can be set by the user. -->
Doze dreams will run whenever the power manager is in a dozing state. -->
<string name="config_dozeComponent">com.android.systemui/com.android.systemui.doze.DozeService</string>
- <!-- Boolean indicddating if restoring network selection should be skipped -->
+ <!-- Boolean indicating if restoring network selection should be skipped -->
<!-- The restoring is handled by modem if it is true -->
<bool name="skip_restoring_network_selection">true</bool>
The default is false. -->
<bool name="config_lidControlsSleep">true</bool>
- <!-- Flag specifying whether VoLTE TTY is supported -->
- <bool name="config_carrier_volte_tty_supported">true</bool>
-
- <!-- TCP Buffers -->
+ <!-- Configure mobile tcp buffer sizes in the form:
+ rat-name:rmem_min,rmem_def,rmem_max,wmem_min,wmem_def,wmem_max
+ If no value is found for the rat-name in use, the system default will be applied.
+ -->
<string-array name="config_mobile_tcp_buffers">
- <item>lte:1048576,3145728,4194304,524288,1572864,2097152</item>
+ <item>lte:1048576,3145728,4194304,1048576,3145728,4194304</item>
+ <item>umts:4094,87380,1220608,4096,16384,1220608</item>
+ <item>hspa:4094,87380,1220608,4096,16384,1220608</item>
+ <item>hsupa:4094,87380,1220608,4096,16384,1220608</item>
+ <item>hsdpa:4094,87380,1220608,4096,16384,1220608</item>
+ <item>hspap:4094,87380,1220608,4096,16384,1220608</item>
</string-array>
<!-- Configure wifi tcp buffersizes in the form:
before automatically restore the default connection. Set -1 if the connection
does not require auto-restore. -->
<!-- the 6th element indicates boot-time dependency-met value. -->
+ <!-- NOTE: The telephony module is no longer reading the configuration below for available
+ APN types. The set of APN types and relevant settings are specified within the telephony
+ module and are non-configurable. Whether or not data connectivity over a cellular network
+ is available at all is controlled by the flag: config_moble_data_capable. -->
<string-array translatable="false" name="networkAttributes">
<item>wifi,1,1,1,-1,true</item>
<item>mobile,0,0,0,-1,true</item>
<item>wifi_p2p,13,1,0,-1,true</item>
<item>mobile_ia,14,0,2,-1,true</item>
<item>mobile_emergency,15,0,2,-1,true</item>
- <item>mobile_bip,23,0,2,60000,true</item>
- <item>mobile_cas,24,0,3,60000,true</item>
- <item>mobile_xcap,27,0,2,60000,true</item>
- <item>mobile_ent1,28,0,2,-1,true</item>
- <item>mobile_ent2,29,0,2,-1,true</item>
</string-array>
<!-- Flag indicating whether we should enable the automatic brightness in Settings.
- config_hardware_automatic_brightness_available is not set, so we will use software implementation -->
+ Software implementation will be used if config_hardware_auto_brightness_available is not set -->
<bool name="config_automatic_brightness_available">true</bool>
- <!-- The default iface on which to monitor data use -->
- <string name="config_datause_iface" translatable="false">rmnet0</string>
-
<!-- Stability requirements in milliseconds for accepting a new brightness level. This is used
for debouncing the light sensor. Different constants are used to debounce the light sensor
when adapting to brighter or darker environments. This parameter controls how quickly
<integer name="config_autoBrightnessBrighteningLightDebounce">0</integer>
<integer name="config_autoBrightnessDarkeningLightDebounce">0</integer>
- <!-- Array of light sensor LUX values to define our levels for auto backlight brightness support.
- The N entries of this array define N 1 zones as follows:
- Zone 0: 0 <= LUX < array[0]
- Zone 1: array[0] <= LUX < array[1]
+ <!-- Array of light sensor lux values to define our levels for auto backlight brightness support.
+ The N entries of this array define N + 1 control points as follows:
+ (1-based arrays)
+
+ Point 1: (0, value[1]): lux <= 0
+ Point 2: (level[1], value[2]): 0 < lux <= level[1]
+ Point 3: (level[2], value[3]): level[2] < lux <= level[3]
...
- Zone N: array[N - 1] <= LUX < array[N]
- Zone N + 1 array[N] <= LUX < infinity
+ Point N+1: (level[N], value[N+1]): level[N] < lux
+
+ The control points must be strictly increasing. Each control point
+ corresponds to an entry in the brightness backlight values arrays.
+ For example, if lux == level[1] (first element of the levels array)
+ then the brightness will be determined by value[2] (second element
+ of the brightness values array).
+
+ Spline interpolation is used to determine the auto-brightness
+ backlight values for lux levels between these control points.
+
Must be overridden in platform specific overlays -->
<integer-array name="config_autoBrightnessLevels">
<item>9</item>
for different hardware and product builds. -->
<string name="config_radio_access_family">GSM | WCDMA | LTE | CDMA | EVDO</string>
- <!-- BurnIn protection. This should be enabled on devices that have OLED displays -->
+ <!-- Enable OLED burn-in protection -->
<bool name="config_enableBurnInProtection">true</bool>
-
- <!-- Boolean indicating whether the wifi chipset has background scan support -->
- <bool translatable="false" name="config_wifi_background_scan_support">true</bool>
</resources>
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2019 The Android Open Source Project
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+-->
+
+<!-- These resources are around just to allow their values to be customized
+ for different hardware and product builds. Do not translate.
+
+ NOTE: The naming convention is "config_camelCaseValue". Some legacy
+ entries do not follow the convention, but all new entries should. -->
+
+<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
+ <!-- boolean indicating whether the WiFi chipset has 5GHz band support.
+ Note: This config is replacing the config_wifi_dual_band_support
+ since more bands may now be supported (such as 6GHz), the naming dual_band
+ is no longer indicative, and a separate config now exists for each band -->
+ <bool translatable="false" name ="config_wifi5ghzSupport">true</bool>
+
+ <!-- Boolean indicating whether the wifi chipset supports background scanning mechanism.
+ This mechanism allows the host to remain in suspend state and the dongle to actively
+ scan and wake the host when a configured SSID is detected by the dongle. This chipset
+ capability can provide power savings when wifi needs to be always kept on. -->
+ <bool translatable="false" name="config_wifi_background_scan_support">true</bool>
+</resources>
<?xml version="1.0" encoding="utf-8"?>
<!--
Copyright (C) 2015 The CyanogenMod Project
+ 2017-2021 The LineageOS Project
+
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
+
http://www.apache.org/licenses/LICENSE-2.0
+
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
NOTE ! - Enable for devices that have a fast response proximity sensor (ideally < 300ms)-->
<bool name="config_proximityCheckOnWake">true</bool>
<integer name="config_proximityCheckTimeout">400</integer>
- <bool name="config_proximityCheckOnWakeEnabledByDefault">false</bool>
<!-- Color temperature settings for LiveDisplay. These were obtained by
measuring the display at various color balance levels. -->
<!-- For high brightness mode -->
<integer name="config_outdoorAmbientLux">20000</integer>
- <!-- BurnIn protection. This should be enabled on devices that have OLED displays -->
- <bool name="config_enableBurnInProtection">true</bool>
-
<!-- All the capabilities of the LEDs on this device, stored as a bit field.
This integer should equal the sum of the corresponding value for each
of the following capabilities present:
For example, a device with notification and battery lights that supports
pulsating and RGB control would set this config to 75. -->
<integer name="config_deviceLightCapabilities">107</integer>
-
- <!-- Disable LiveDisplay by default -->
- <integer name="config_defaultLiveDislayMode">0</integer>
<!-- Hardware keys present on the device, stored as a bit field.
This integer should equal the sum of the corresponding value for each
+++ /dev/null
-<?xml version="1.0" encoding="utf-8"?>
-<!-- Copyright (C) 2009 The Android Open Source Project
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-
-<!-- Version History
- version 1 - initial version.
- version 2 - added recipientLimit.
- version 3 - added min/max recycler values.
- version 4 - added sms to mms text threshold.
--->
-
-<mms_config version="4">
-
- <!-- Maximum message size in bytes for a MMS message -->
- <int name="maxMessageSize">1045876</int>
-
- <!-- Maximum height for an attached image -->
- <int name="maxImageHeight">2592</int>
-
- <!-- Maximum width for an attached image -->
- <int name="maxImageWidth">2592</int>
-
- <!-- UAProf URL -->
- <string name="uaProfUrl">http://www.google.com/oha/rdf/ua-profile-kila.xml</string>
-
-</mms_config>
projects / GitHub / LineageOS / android_device_samsung_s5neolte.git / commitdiff