[media] ov2640: update bindings

Update the bindings for this device based on a working DT example.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

diff --git a/Documentation/devicetree/bindings/media/i2c/ov2640.txt b/Documentation/devicetree/bindings/media/i2c/ov2640.txt
index c429b5bdcaa05ef7486965814b5e55820f9d2dc3..989ce6cb6ac30489df01c8008ef0181e5e7bc637 100644 (file)
--- a/Documentation/devicetree/bindings/media/i2c/ov2640.txt
+++ b/Documentation/devicetree/bindings/media/i2c/ov2640.txt
@@ -1,8 +1,8 @@
 * Omnivision OV2640 CMOS sensor
 
-The Omnivision OV2640 sensor support multiple resolutions output, such as
-CIF, SVGA, UXGA. It also can support YUV422/420, RGB565/555 or raw RGB
-output format.
+The Omnivision OV2640 sensor supports multiple resolutions output, such as
+CIF, SVGA, UXGA. It also can support the YUV422/420, RGB565/555 or raw RGB
+output formats.
 
 Required Properties:
 - compatible: should be "ovti,ov2640"
@@ -20,26 +20,21 @@ Documentation/devicetree/bindings/media/video-interfaces.txt.
 Example:
 
        i2c1: i2c@f0018000 {
-               ov2640: camera@0x30 {
+               ov2640: camera@30 {
                        compatible = "ovti,ov2640";
                        reg = <0x30>;
-
                        pinctrl-names = "default";
-                       pinctrl-0 = <&pinctrl_pck1 &pinctrl_ov2640_pwdn &pinctrl_ov2640_resetb>;
-
-                       resetb-gpios = <&pioE 24 GPIO_ACTIVE_LOW>;
-                       pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>;
-
-                       clocks = <&pck1>;
+                       pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
+                       resetb-gpios = <&pioE 11 GPIO_ACTIVE_LOW>;
+                       pwdn-gpios = <&pioE 13 GPIO_ACTIVE_HIGH>;
+                       clocks = <&pck0>;
                        clock-names = "xvclk";
-
-                       assigned-clocks = <&pck1>;
+                       assigned-clocks = <&pck0>;
                        assigned-clock-rates = <25000000>;
 
                        port {
                                ov2640_0: endpoint {
                                        remote-endpoint = <&isi_0>;
-                                       bus-width = <8>;
                                };
                        };
                };