shpchp: delete trailing whitespace
authorKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Tue, 9 Jan 2007 21:03:10 +0000 (13:03 -0800)
committerGreg Kroah-Hartman <gregkh@suse.de>
Wed, 7 Feb 2007 23:50:05 +0000 (15:50 -0800)
This patch deletes trailing white space in SHPCHP driver. This has no
functional change.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/pci/hotplug/shpchp.h
drivers/pci/hotplug/shpchp_ctrl.c
drivers/pci/hotplug/shpchp_hpc.c

index 3ca6a4f574b3878bd2ff129374a9f7366e7186c4..01d31a1f697c7b53f338e1c768488b9e70877a73 100644 (file)
@@ -106,7 +106,7 @@ struct controller {
 };
 
 /* Define AMD SHPC ID  */
-#define PCI_DEVICE_ID_AMD_GOLAM_7450   0x7450 
+#define PCI_DEVICE_ID_AMD_GOLAM_7450   0x7450
 #define PCI_DEVICE_ID_AMD_POGO_7458    0x7458
 
 /* AMD PCIX bridge registers */
@@ -221,7 +221,7 @@ enum ctrl_offsets {
 };
 
 static inline struct slot *get_slot(struct hotplug_slot *hotplug_slot)
-{ 
+{
        return hotplug_slot->private;
 }
 
index 6bb84734cd6c6520abfb146d48c7e9b95bb6d639..b746bd265bc6543defe17bed6dca615bbe906768 100644 (file)
@@ -64,7 +64,7 @@ u8 shpchp_handle_attention_button(u8 hp_slot, struct controller *ctrl)
 
        /* Attention Button Change */
        dbg("shpchp:  Attention button interrupt received.\n");
-       
+
        p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
        p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save));
 
@@ -128,7 +128,7 @@ u8 shpchp_handle_presence_change(u8 hp_slot, struct controller *ctrl)
 
        p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
 
-       /* 
+       /*
         * Save the presence state
         */
        p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save));
@@ -184,12 +184,12 @@ u8 shpchp_handle_power_fault(u8 hp_slot, struct controller *ctrl)
        return 1;
 }
 
-/* The following routines constitute the bulk of the 
+/* The following routines constitute the bulk of the
    hotplug controller logic
  */
 static int change_bus_speed(struct controller *ctrl, struct slot *p_slot,
                enum pci_bus_speed speed)
-{ 
+{
        int rc = 0;
 
        dbg("%s: change to speed %d\n", __FUNCTION__, speed);
@@ -204,7 +204,7 @@ static int change_bus_speed(struct controller *ctrl, struct slot *p_slot,
 static int fix_bus_speed(struct controller *ctrl, struct slot *pslot,
                u8 flag, enum pci_bus_speed asp, enum pci_bus_speed bsp,
                enum pci_bus_speed msp)
-{ 
+{
        int rc = 0;
 
        /*
@@ -257,23 +257,23 @@ static int board_added(struct slot *p_slot)
                err("%s: Failed to power on slot\n", __FUNCTION__);
                return -1;
        }
-       
+
        if ((ctrl->pci_dev->vendor == 0x8086) && (ctrl->pci_dev->device == 0x0332)) {
                if (slots_not_empty)
                        return WRONG_BUS_FREQUENCY;
-               
+
                if ((rc = p_slot->hpc_ops->set_bus_speed_mode(p_slot, PCI_SPEED_33MHz))) {
                        err("%s: Issue of set bus speed mode command failed\n", __FUNCTION__);
                        return WRONG_BUS_FREQUENCY;
                }
-               
+
                /* turn on board, blink green LED, turn off Amber LED */
                if ((rc = p_slot->hpc_ops->slot_enable(p_slot))) {
                        err("%s: Issue of Slot Enable command failed\n", __FUNCTION__);
                        return rc;
                }
        }
+
        rc = p_slot->hpc_ops->get_adapter_speed(p_slot, &asp);
        if (rc) {
                err("%s: Can't get adapter speed or bus mode mismatch\n",
@@ -378,7 +378,7 @@ static int remove_board(struct slot *p_slot)
                err("%s: Issue of Slot Disable command failed\n", __FUNCTION__);
                return rc;
        }
-       
+
        rc = p_slot->hpc_ops->set_attention_status(p_slot, 0);
        if (rc) {
                err("%s: Issue of Set Attention command failed\n", __FUNCTION__);
index 7e9347eea5b1357eae0f295b1b720058e2ce98a9..5183a45d45b50f6a02b5ada18cdeb9e9a0893624 100644 (file)
@@ -329,9 +329,9 @@ static int shpc_write_cmd(struct slot *slot, u8 t_slot, u8 cmd)
        ++t_slot;
        temp_word =  (t_slot << 8) | (cmd & 0xFF);
        dbg("%s: t_slot %x cmd %x\n", __FUNCTION__, t_slot, cmd);
-       
+
        /* To make sure the Controller Busy bit is 0 before we send out the
-        * command. 
+        * command.
         */
        shpc_writew(ctrl, CMD, temp_word);
 
@@ -357,7 +357,7 @@ static int hpc_check_cmd_status(struct controller *ctrl)
 {
        int retval = 0;
        u16 cmd_status = shpc_readw(ctrl, CMD_STATUS) & 0x000F;
-       
+
        switch (cmd_status >> 1) {
        case 0:
                retval = 0;
@@ -544,7 +544,7 @@ static int hpc_set_attention_status(struct slot *slot, u8 value)
        u8 slot_cmd = 0;
 
        switch (value) {
-               case 0 :        
+               case 0 :
                        slot_cmd = SET_ATTN_OFF;        /* OFF */
                        break;
                case 1:
@@ -735,7 +735,7 @@ static irqreturn_t shpc_isr(int irq, void *dev_id)
        if (!intr_loc)
                return IRQ_NONE;
 
-       dbg("%s: intr_loc = %x\n",__FUNCTION__, intr_loc); 
+       dbg("%s: intr_loc = %x\n",__FUNCTION__, intr_loc);
 
        if(!shpchp_poll_mode) {
                /*
@@ -748,12 +748,12 @@ static irqreturn_t shpc_isr(int irq, void *dev_id)
                shpc_writel(ctrl, SERR_INTR_ENABLE, serr_int);
 
                intr_loc2 = shpc_readl(ctrl, INTR_LOC);
-               dbg("%s: intr_loc2 = %x\n",__FUNCTION__, intr_loc2); 
+               dbg("%s: intr_loc2 = %x\n",__FUNCTION__, intr_loc2);
        }
 
        if (intr_loc & CMD_INTR_PENDING) {
-               /* 
-                * Command Complete Interrupt Pending 
+               /*
+                * Command Complete Interrupt Pending
                 * RO only - clear by writing 1 to the Command Completion
                 * Detect bit in Controller SERR-INT register
                 */
@@ -767,7 +767,7 @@ static irqreturn_t shpc_isr(int irq, void *dev_id)
        if (!(intr_loc & ~CMD_INTR_PENDING))
                goto out;
 
-       for (hp_slot = 0; hp_slot < ctrl->num_slots; hp_slot++) { 
+       for (hp_slot = 0; hp_slot < ctrl->num_slots; hp_slot++) {
                /* To find out which slot has interrupt pending */
                if (!(intr_loc & SLOT_INTR_PENDING(hp_slot)))
                        continue;
@@ -799,7 +799,7 @@ static irqreturn_t shpc_isr(int irq, void *dev_id)
                serr_int &= ~(GLOBAL_INTR_MASK | SERR_INTR_RSVDZ_MASK);
                shpc_writel(ctrl, SERR_INTR_ENABLE, serr_int);
        }
-       
+
        return IRQ_HANDLED;
 }
 
@@ -919,7 +919,7 @@ static struct hpc_ops shpchp_hpc_ops = {
        .power_on_slot                  = hpc_power_on_slot,
        .slot_enable                    = hpc_slot_enable,
        .slot_disable                   = hpc_slot_disable,
-       .set_bus_speed_mode             = hpc_set_bus_speed_mode,         
+       .set_bus_speed_mode             = hpc_set_bus_speed_mode,
        .set_attention_status   = hpc_set_attention_status,
        .get_power_status               = hpc_get_power_status,
        .get_attention_status   = hpc_get_attention_status,
@@ -936,7 +936,7 @@ static struct hpc_ops shpchp_hpc_ops = {
        .green_led_on                   = hpc_set_green_led_on,
        .green_led_off                  = hpc_set_green_led_off,
        .green_led_blink                = hpc_set_green_led_blink,
-       
+
        .release_ctlr                   = hpc_release_ctlr,
 };
 
@@ -993,9 +993,9 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev)
                ctrl->mmio_size = 0x24 + 0x4 * num_slots;
        }
 
-       info("HPC vendor_id %x device_id %x ss_vid %x ss_did %x\n", pdev->vendor, pdev->device, pdev->subsystem_vendor, 
+       info("HPC vendor_id %x device_id %x ss_vid %x ss_did %x\n", pdev->vendor, pdev->device, pdev->subsystem_vendor,
                pdev->subsystem_device);
-       
+
        rc = pci_enable_device(pdev);
        if (rc) {
                err("%s: pci_enable_device failed\n", __FUNCTION__);
@@ -1057,7 +1057,7 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev)
                slot_reg &= ~SLOT_REG_RSVDZ_MASK;
                shpc_writel(ctrl, SLOT_REG(hp_slot), slot_reg);
        }
-       
+
        if (shpchp_poll_mode) {
                /* Install interrupt polling timer. Start with 10 sec delay */
                init_timer(&ctrl->poll_timer);
@@ -1069,7 +1069,7 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev)
                        info("Can't get msi for the hotplug controller\n");
                        info("Use INTx for the hotplug controller\n");
                }
-               
+
                rc = request_irq(ctrl->pci_dev->irq, shpc_isr, IRQF_SHARED,
                                 MY_NAME, (void *)ctrl);
                dbg("%s: request_irq %d for hpc%d (returns %d)\n",