-wl12xx-objs = main.o spi.o event.o tx.o rx.o \
- ps.o cmd.o acx.o boot.o init.o wl1251.o \
+wl12xx-objs = main.o spi.o event.o wl1251_tx.o rx.o \
+ ps.o cmd.o acx.o boot.o init.o wl1251.o \
debugfs.o
obj-$(CONFIG_WL12XX) += wl12xx.o
#include "wl1251.h"
#include "spi.h"
#include "event.h"
-#include "tx.h"
+#include "wl1251_tx.h"
#include "rx.h"
#include "ps.h"
#include "init.h"
skb_queue_tail(&wl->tx_queue, skb);
+ /*
+ * The chip specific setup must run before the first TX packet -
+ * before that, the tx_work will not be initialized!
+ */
+
schedule_work(&wl->tx_work);
/*
mutex_lock(&wl->mutex);
/* let's notify MAC80211 about the remaining pending TX frames */
- wl12xx_tx_flush(wl);
-
+ wl->chip.op_tx_flush(wl);
wl12xx_power_off(wl);
memset(wl->bssid, 0, ETH_ALEN);
{
/* The tx descriptor buffer and the TKIP space */
wl->hw->extra_tx_headroom = sizeof(struct tx_double_buffer_desc)
- + WL12XX_TKIP_IV_SPACE;
+ + WL1251_TKIP_IV_SPACE;
/* unit us */
/* FIXME: find a proper value */
skb_queue_head_init(&wl->tx_queue);
- INIT_WORK(&wl->tx_work, wl12xx_tx_work);
INIT_WORK(&wl->filter_work, wl12xx_filter_work);
wl->channel = WL12XX_DEFAULT_CHANNEL;
wl->scanning = false;
+++ /dev/null
-/*
- * This file is part of wl12xx
- *
- * Copyright (c) 1998-2007 Texas Instruments Incorporated
- * Copyright (C) 2008 Nokia Corporation
- *
- * Contact: Kalle Valo <kalle.valo@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-
-#include "wl12xx.h"
-#include "reg.h"
-#include "spi.h"
-#include "tx.h"
-#include "ps.h"
-
-static bool wl12xx_tx_double_buffer_busy(struct wl12xx *wl, u32 data_out_count)
-{
- int used, data_in_count;
-
- data_in_count = wl->data_in_count;
-
- if (data_in_count < data_out_count)
- /* data_in_count has wrapped */
- data_in_count += TX_STATUS_DATA_OUT_COUNT_MASK + 1;
-
- used = data_in_count - data_out_count;
-
- WARN_ON(used < 0);
- WARN_ON(used > DP_TX_PACKET_RING_CHUNK_NUM);
-
- if (used >= DP_TX_PACKET_RING_CHUNK_NUM)
- return true;
- else
- return false;
-}
-
-static int wl12xx_tx_path_status(struct wl12xx *wl)
-{
- u32 status, addr, data_out_count;
- bool busy;
-
- addr = wl->data_path->tx_control_addr;
- status = wl12xx_mem_read32(wl, addr);
- data_out_count = status & TX_STATUS_DATA_OUT_COUNT_MASK;
- busy = wl12xx_tx_double_buffer_busy(wl, data_out_count);
-
- if (busy)
- return -EBUSY;
-
- return 0;
-}
-
-static int wl12xx_tx_id(struct wl12xx *wl, struct sk_buff *skb)
-{
- int i;
-
- for (i = 0; i < FW_TX_CMPLT_BLOCK_SIZE; i++)
- if (wl->tx_frames[i] == NULL) {
- wl->tx_frames[i] = skb;
- return i;
- }
-
- return -EBUSY;
-}
-
-static void wl12xx_tx_control(struct tx_double_buffer_desc *tx_hdr,
- struct ieee80211_tx_info *control, u16 fc)
-{
- *(u16 *)&tx_hdr->control = 0;
-
- tx_hdr->control.rate_policy = 0;
-
- /* 802.11 packets */
- tx_hdr->control.packet_type = 0;
-
- if (control->flags & IEEE80211_TX_CTL_NO_ACK)
- tx_hdr->control.ack_policy = 1;
-
- tx_hdr->control.tx_complete = 1;
-
- if ((fc & IEEE80211_FTYPE_DATA) &&
- ((fc & IEEE80211_STYPE_QOS_DATA) ||
- (fc & IEEE80211_STYPE_QOS_NULLFUNC)))
- tx_hdr->control.qos = 1;
-}
-
-/* RSN + MIC = 8 + 8 = 16 bytes (worst case - AES). */
-#define MAX_MSDU_SECURITY_LENGTH 16
-#define MAX_MPDU_SECURITY_LENGTH 16
-#define WLAN_QOS_HDR_LEN 26
-#define MAX_MPDU_HEADER_AND_SECURITY (MAX_MPDU_SECURITY_LENGTH + \
- WLAN_QOS_HDR_LEN)
-#define HW_BLOCK_SIZE 252
-static void wl12xx_tx_frag_block_num(struct tx_double_buffer_desc *tx_hdr)
-{
- u16 payload_len, frag_threshold, mem_blocks;
- u16 num_mpdus, mem_blocks_per_frag;
-
- frag_threshold = IEEE80211_MAX_FRAG_THRESHOLD;
- tx_hdr->frag_threshold = cpu_to_le16(frag_threshold);
-
- payload_len = tx_hdr->length + MAX_MSDU_SECURITY_LENGTH;
-
- if (payload_len > frag_threshold) {
- mem_blocks_per_frag =
- ((frag_threshold + MAX_MPDU_HEADER_AND_SECURITY) /
- HW_BLOCK_SIZE) + 1;
- num_mpdus = payload_len / frag_threshold;
- mem_blocks = num_mpdus * mem_blocks_per_frag;
- payload_len -= num_mpdus * frag_threshold;
- num_mpdus++;
-
- } else {
- mem_blocks_per_frag = 0;
- mem_blocks = 0;
- num_mpdus = 1;
- }
-
- mem_blocks += (payload_len / HW_BLOCK_SIZE) + 1;
-
- if (num_mpdus > 1)
- mem_blocks += min(num_mpdus, mem_blocks_per_frag);
-
- tx_hdr->num_mem_blocks = mem_blocks;
-}
-
-static int wl12xx_tx_fill_hdr(struct wl12xx *wl, struct sk_buff *skb,
- struct ieee80211_tx_info *control)
-{
- struct tx_double_buffer_desc *tx_hdr;
- struct ieee80211_rate *rate;
- int id;
- u16 fc;
-
- if (!skb)
- return -EINVAL;
-
- id = wl12xx_tx_id(wl, skb);
- if (id < 0)
- return id;
-
- fc = *(u16 *)skb->data;
- tx_hdr = (struct tx_double_buffer_desc *) skb_push(skb,
- sizeof(*tx_hdr));
-
- tx_hdr->length = cpu_to_le16(skb->len - sizeof(*tx_hdr));
- rate = ieee80211_get_tx_rate(wl->hw, control);
- tx_hdr->rate = cpu_to_le16(rate->hw_value);
- tx_hdr->expiry_time = cpu_to_le32(1 << 16);
- tx_hdr->id = id;
-
- /* FIXME: how to get the correct queue id? */
- tx_hdr->xmit_queue = 0;
-
- wl12xx_tx_control(tx_hdr, control, fc);
- wl12xx_tx_frag_block_num(tx_hdr);
-
- return 0;
-}
-
-/* We copy the packet to the target */
-static int wl12xx_tx_send_packet(struct wl12xx *wl, struct sk_buff *skb,
- struct ieee80211_tx_info *control)
-{
- struct tx_double_buffer_desc *tx_hdr;
- int len;
- u32 addr;
-
- if (!skb)
- return -EINVAL;
-
- tx_hdr = (struct tx_double_buffer_desc *) skb->data;
-
- if (control->control.hw_key &&
- control->control.hw_key->alg == ALG_TKIP) {
- int hdrlen;
- u16 fc;
- u8 *pos;
-
- fc = *(u16 *)(skb->data + sizeof(*tx_hdr));
- tx_hdr->length += WL12XX_TKIP_IV_SPACE;
-
- hdrlen = ieee80211_hdrlen(fc);
-
- pos = skb_push(skb, WL12XX_TKIP_IV_SPACE);
- memmove(pos, pos + WL12XX_TKIP_IV_SPACE,
- sizeof(*tx_hdr) + hdrlen);
- }
-
- /* Revisit. This is a workaround for getting non-aligned packets.
- This happens at least with EAPOL packets from the user space.
- Our DMA requires packets to be aligned on a 4-byte boundary.
- */
- if (unlikely((long)skb->data & 0x03)) {
- int offset = (4 - (long)skb->data) & 0x03;
- wl12xx_debug(DEBUG_TX, "skb offset %d", offset);
-
- /* check whether the current skb can be used */
- if (!skb_cloned(skb) && (skb_tailroom(skb) >= offset)) {
- unsigned char *src = skb->data;
-
- /* align the buffer on a 4-byte boundary */
- skb_reserve(skb, offset);
- memmove(skb->data, src, skb->len);
- } else {
- wl12xx_info("No handler, fixme!");
- return -EINVAL;
- }
- }
-
- /* Our skb->data at this point includes the HW header */
- len = WL12XX_TX_ALIGN(skb->len);
-
- if (wl->data_in_count & 0x1)
- addr = wl->data_path->tx_packet_ring_addr +
- wl->data_path->tx_packet_ring_chunk_size;
- else
- addr = wl->data_path->tx_packet_ring_addr;
-
- wl12xx_spi_mem_write(wl, addr, skb->data, len);
-
- wl12xx_debug(DEBUG_TX, "tx id %u skb 0x%p payload %u rate 0x%x",
- tx_hdr->id, skb, tx_hdr->length, tx_hdr->rate);
-
- return 0;
-}
-
-static void wl12xx_tx_trigger(struct wl12xx *wl)
-{
- u32 data, addr;
-
- if (wl->data_in_count & 0x1) {
- addr = ACX_REG_INTERRUPT_TRIG_H;
- data = INTR_TRIG_TX_PROC1;
- } else {
- addr = ACX_REG_INTERRUPT_TRIG;
- data = INTR_TRIG_TX_PROC0;
- }
-
- wl12xx_reg_write32(wl, addr, data);
-
- /* Bumping data in */
- wl->data_in_count = (wl->data_in_count + 1) &
- TX_STATUS_DATA_OUT_COUNT_MASK;
-}
-
-/* caller must hold wl->mutex */
-static int wl12xx_tx_frame(struct wl12xx *wl, struct sk_buff *skb)
-{
- struct ieee80211_tx_info *info;
- int ret = 0;
- u8 idx;
-
- info = IEEE80211_SKB_CB(skb);
-
- if (info->control.hw_key) {
- idx = info->control.hw_key->hw_key_idx;
- if (unlikely(wl->default_key != idx)) {
- ret = wl12xx_acx_default_key(wl, idx);
- if (ret < 0)
- return ret;
- }
- }
-
- ret = wl12xx_tx_path_status(wl);
- if (ret < 0)
- return ret;
-
- ret = wl12xx_tx_fill_hdr(wl, skb, info);
- if (ret < 0)
- return ret;
-
- ret = wl12xx_tx_send_packet(wl, skb, info);
- if (ret < 0)
- return ret;
-
- wl12xx_tx_trigger(wl);
-
- return ret;
-}
-
-void wl12xx_tx_work(struct work_struct *work)
-{
- struct wl12xx *wl = container_of(work, struct wl12xx, tx_work);
- struct sk_buff *skb;
- bool woken_up = false;
- int ret;
-
- mutex_lock(&wl->mutex);
-
- if (unlikely(wl->state == WL12XX_STATE_OFF))
- goto out;
-
- while ((skb = skb_dequeue(&wl->tx_queue))) {
- if (!woken_up) {
- wl12xx_ps_elp_wakeup(wl);
- woken_up = true;
- }
-
- ret = wl12xx_tx_frame(wl, skb);
- if (ret == -EBUSY) {
- /* firmware buffer is full, stop queues */
- wl12xx_debug(DEBUG_TX, "tx_work: fw buffer full, "
- "stop queues");
- ieee80211_stop_queues(wl->hw);
- wl->tx_queue_stopped = true;
- skb_queue_head(&wl->tx_queue, skb);
- goto out;
- } else if (ret < 0) {
- dev_kfree_skb(skb);
- goto out;
- }
- }
-
-out:
- if (woken_up)
- wl12xx_ps_elp_sleep(wl);
-
- mutex_unlock(&wl->mutex);
-}
-
-static const char *wl12xx_tx_parse_status(u8 status)
-{
- /* 8 bit status field, one character per bit plus null */
- static char buf[9];
- int i = 0;
-
- memset(buf, 0, sizeof(buf));
-
- if (status & TX_DMA_ERROR)
- buf[i++] = 'm';
- if (status & TX_DISABLED)
- buf[i++] = 'd';
- if (status & TX_RETRY_EXCEEDED)
- buf[i++] = 'r';
- if (status & TX_TIMEOUT)
- buf[i++] = 't';
- if (status & TX_KEY_NOT_FOUND)
- buf[i++] = 'k';
- if (status & TX_ENCRYPT_FAIL)
- buf[i++] = 'e';
- if (status & TX_UNAVAILABLE_PRIORITY)
- buf[i++] = 'p';
-
- /* bit 0 is unused apparently */
-
- return buf;
-}
-
-static void wl12xx_tx_packet_cb(struct wl12xx *wl,
- struct tx_result *result)
-{
- struct ieee80211_tx_info *info;
- struct sk_buff *skb;
- int hdrlen, ret;
- u8 *frame;
-
- skb = wl->tx_frames[result->id];
- if (skb == NULL) {
- wl12xx_error("SKB for packet %d is NULL", result->id);
- return;
- }
-
- info = IEEE80211_SKB_CB(skb);
-
- if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) &&
- (result->status == TX_SUCCESS))
- info->flags |= IEEE80211_TX_STAT_ACK;
-
- info->status.rates[0].count = result->ack_failures + 1;
- wl->stats.retry_count += result->ack_failures;
-
- /*
- * We have to remove our private TX header before pushing
- * the skb back to mac80211.
- */
- frame = skb_pull(skb, sizeof(struct tx_double_buffer_desc));
- if (info->control.hw_key &&
- info->control.hw_key->alg == ALG_TKIP) {
- hdrlen = ieee80211_get_hdrlen_from_skb(skb);
- memmove(frame + WL12XX_TKIP_IV_SPACE, frame, hdrlen);
- skb_pull(skb, WL12XX_TKIP_IV_SPACE);
- }
-
- wl12xx_debug(DEBUG_TX, "tx status id %u skb 0x%p failures %u rate 0x%x"
- " status 0x%x (%s)",
- result->id, skb, result->ack_failures, result->rate,
- result->status, wl12xx_tx_parse_status(result->status));
-
-
- ieee80211_tx_status(wl->hw, skb);
-
- wl->tx_frames[result->id] = NULL;
-
- if (wl->tx_queue_stopped) {
- wl12xx_debug(DEBUG_TX, "cb: queue was stopped");
-
- skb = skb_dequeue(&wl->tx_queue);
-
- /* The skb can be NULL because tx_work might have been
- scheduled before the queue was stopped making the
- queue empty */
-
- if (skb) {
- ret = wl12xx_tx_frame(wl, skb);
- if (ret == -EBUSY) {
- /* firmware buffer is still full */
- wl12xx_debug(DEBUG_TX, "cb: fw buffer "
- "still full");
- skb_queue_head(&wl->tx_queue, skb);
- return;
- } else if (ret < 0) {
- dev_kfree_skb(skb);
- return;
- }
- }
-
- wl12xx_debug(DEBUG_TX, "cb: waking queues");
- ieee80211_wake_queues(wl->hw);
- wl->tx_queue_stopped = false;
- }
-}
-
-/* Called upon reception of a TX complete interrupt */
-void wl12xx_tx_complete(struct wl12xx *wl)
-{
- int i, result_index, num_complete = 0;
- struct tx_result result[FW_TX_CMPLT_BLOCK_SIZE], *result_ptr;
-
- if (unlikely(wl->state != WL12XX_STATE_ON))
- return;
-
- /* First we read the result */
- wl12xx_spi_mem_read(wl, wl->data_path->tx_complete_addr,
- result, sizeof(result));
-
- result_index = wl->next_tx_complete;
-
- for (i = 0; i < ARRAY_SIZE(result); i++) {
- result_ptr = &result[result_index];
-
- if (result_ptr->done_1 == 1 &&
- result_ptr->done_2 == 1) {
- wl12xx_tx_packet_cb(wl, result_ptr);
-
- result_ptr->done_1 = 0;
- result_ptr->done_2 = 0;
-
- result_index = (result_index + 1) &
- (FW_TX_CMPLT_BLOCK_SIZE - 1);
- num_complete++;
- } else {
- break;
- }
- }
-
- /* Every completed frame needs to be acknowledged */
- if (num_complete) {
- /*
- * If we've wrapped, we have to clear
- * the results in 2 steps.
- */
- if (result_index > wl->next_tx_complete) {
- /* Only 1 write is needed */
- wl12xx_spi_mem_write(wl,
- wl->data_path->tx_complete_addr +
- (wl->next_tx_complete *
- sizeof(struct tx_result)),
- &result[wl->next_tx_complete],
- num_complete *
- sizeof(struct tx_result));
-
-
- } else if (result_index < wl->next_tx_complete) {
- /* 2 writes are needed */
- wl12xx_spi_mem_write(wl,
- wl->data_path->tx_complete_addr +
- (wl->next_tx_complete *
- sizeof(struct tx_result)),
- &result[wl->next_tx_complete],
- (FW_TX_CMPLT_BLOCK_SIZE -
- wl->next_tx_complete) *
- sizeof(struct tx_result));
-
- wl12xx_spi_mem_write(wl,
- wl->data_path->tx_complete_addr,
- result,
- (num_complete -
- FW_TX_CMPLT_BLOCK_SIZE +
- wl->next_tx_complete) *
- sizeof(struct tx_result));
-
- } else {
- /* We have to write the whole array */
- wl12xx_spi_mem_write(wl,
- wl->data_path->tx_complete_addr,
- result,
- FW_TX_CMPLT_BLOCK_SIZE *
- sizeof(struct tx_result));
- }
-
- }
-
- wl->next_tx_complete = result_index;
-}
-
-/* caller must hold wl->mutex */
-void wl12xx_tx_flush(struct wl12xx *wl)
-{
- int i;
- struct sk_buff *skb;
- struct ieee80211_tx_info *info;
-
- /* TX failure */
-/* control->flags = 0; FIXME */
-
- while ((skb = skb_dequeue(&wl->tx_queue))) {
- info = IEEE80211_SKB_CB(skb);
-
- wl12xx_debug(DEBUG_TX, "flushing skb 0x%p", skb);
-
- if (!(info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS))
- continue;
-
- ieee80211_tx_status(wl->hw, skb);
- }
-
- for (i = 0; i < FW_TX_CMPLT_BLOCK_SIZE; i++)
- if (wl->tx_frames[i] != NULL) {
- skb = wl->tx_frames[i];
- info = IEEE80211_SKB_CB(skb);
-
- if (!(info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS))
- continue;
-
- ieee80211_tx_status(wl->hw, skb);
- wl->tx_frames[i] = NULL;
- }
-}
+++ /dev/null
-/*
- * This file is part of wl12xx
- *
- * Copyright (c) 1998-2007 Texas Instruments Incorporated
- * Copyright (C) 2008 Nokia Corporation
- *
- * Contact: Kalle Valo <kalle.valo@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#ifndef __WL12XX_TX_H__
-#define __WL12XX_TX_H__
-
-#include <linux/bitops.h>
-
-/*
- *
- * TX PATH
- *
- * The Tx path uses a double buffer and a tx_control structure, each located
- * at a fixed address in the device's memory. On startup, the host retrieves
- * the pointers to these addresses. A double buffer allows for continuous data
- * flow towards the device. The host keeps track of which buffer is available
- * and alternates between these two buffers on a per packet basis.
- *
- * The size of each of the two buffers is large enough to hold the longest
- * 802.3 packet - maximum size Ethernet packet + header + descriptor.
- * TX complete indication will be received a-synchronously in a TX done cyclic
- * buffer which is composed of 16 tx_result descriptors structures and is used
- * in a cyclic manner.
- *
- * The TX (HOST) procedure is as follows:
- * 1. Read the Tx path status, that will give the data_out_count.
- * 2. goto 1, if not possible.
- * i.e. if data_in_count - data_out_count >= HwBuffer size (2 for double
- * buffer).
- * 3. Copy the packet (preceded by double_buffer_desc), if possible.
- * i.e. if data_in_count - data_out_count < HwBuffer size (2 for double
- * buffer).
- * 4. increment data_in_count.
- * 5. Inform the firmware by generating a firmware internal interrupt.
- * 6. FW will increment data_out_count after it reads the buffer.
- *
- * The TX Complete procedure:
- * 1. To get a TX complete indication the host enables the tx_complete flag in
- * the TX descriptor Structure.
- * 2. For each packet with a Tx Complete field set, the firmware adds the
- * transmit results to the cyclic buffer (txDoneRing) and sets both done_1
- * and done_2 to 1 to indicate driver ownership.
- * 3. The firmware sends a Tx Complete interrupt to the host to trigger the
- * host to process the new data. Note: interrupt will be send per packet if
- * TX complete indication was requested in tx_control or per crossing
- * aggregation threshold.
- * 4. After receiving the Tx Complete interrupt, the host reads the
- * TxDescriptorDone information in a cyclic manner and clears both done_1
- * and done_2 fields.
- *
- */
-
-#define TX_COMPLETE_REQUIRED_BIT 0x80
-#define TX_STATUS_DATA_OUT_COUNT_MASK 0xf
-#define WL12XX_TX_ALIGN_TO 4
-#define WL12XX_TX_ALIGN(len) (((len) + WL12XX_TX_ALIGN_TO - 1) & \
- ~(WL12XX_TX_ALIGN_TO - 1))
-#define WL12XX_TKIP_IV_SPACE 4
-
-struct tx_control {
- /* Rate Policy (class) index */
- unsigned rate_policy:3;
-
- /* When set, no ack policy is expected */
- unsigned ack_policy:1;
-
- /*
- * Packet type:
- * 0 -> 802.11
- * 1 -> 802.3
- * 2 -> IP
- * 3 -> raw codec
- */
- unsigned packet_type:2;
-
- /* If set, this is a QoS-Null or QoS-Data frame */
- unsigned qos:1;
-
- /*
- * If set, the target triggers the tx complete INT
- * upon frame sending completion.
- */
- unsigned tx_complete:1;
-
- /* 2 bytes padding before packet header */
- unsigned xfer_pad:1;
-
- unsigned reserved:7;
-} __attribute__ ((packed));
-
-
-struct tx_double_buffer_desc {
- /* Length of payload, including headers. */
- u16 length;
-
- /*
- * A bit mask that specifies the initial rate to be used
- * Possible values are:
- * 0x0001 - 1Mbits
- * 0x0002 - 2Mbits
- * 0x0004 - 5.5Mbits
- * 0x0008 - 6Mbits
- * 0x0010 - 9Mbits
- * 0x0020 - 11Mbits
- * 0x0040 - 12Mbits
- * 0x0080 - 18Mbits
- * 0x0100 - 22Mbits
- * 0x0200 - 24Mbits
- * 0x0400 - 36Mbits
- * 0x0800 - 48Mbits
- * 0x1000 - 54Mbits
- */
- u16 rate;
-
- /* Time in us that a packet can spend in the target */
- u32 expiry_time;
-
- /* index of the TX queue used for this packet */
- u8 xmit_queue;
-
- /* Used to identify a packet */
- u8 id;
-
- struct tx_control control;
-
- /*
- * The FW should cut the packet into fragments
- * of this size.
- */
- u16 frag_threshold;
-
- /* Numbers of HW queue blocks to be allocated */
- u8 num_mem_blocks;
-
- u8 reserved;
-} __attribute__ ((packed));
-
-enum {
- TX_SUCCESS = 0,
- TX_DMA_ERROR = BIT(7),
- TX_DISABLED = BIT(6),
- TX_RETRY_EXCEEDED = BIT(5),
- TX_TIMEOUT = BIT(4),
- TX_KEY_NOT_FOUND = BIT(3),
- TX_ENCRYPT_FAIL = BIT(2),
- TX_UNAVAILABLE_PRIORITY = BIT(1),
-};
-
-struct tx_result {
- /*
- * Ownership synchronization between the host and
- * the firmware. If done_1 and done_2 are cleared,
- * owned by the FW (no info ready).
- */
- u8 done_1;
-
- /* same as double_buffer_desc->id */
- u8 id;
-
- /*
- * Total air access duration consumed by this
- * packet, including all retries and overheads.
- */
- u16 medium_usage;
-
- /* Total media delay (from 1st EDCA AIFS counter until TX Complete). */
- u32 medium_delay;
-
- /* Time between host xfer and tx complete */
- u32 fw_hnadling_time;
-
- /* The LS-byte of the last TKIP sequence number. */
- u8 lsb_seq_num;
-
- /* Retry count */
- u8 ack_failures;
-
- /* At which rate we got a ACK */
- u16 rate;
-
- u16 reserved;
-
- /* TX_* */
- u8 status;
-
- /* See done_1 */
- u8 done_2;
-} __attribute__ ((packed));
-
-void wl12xx_tx_work(struct work_struct *work);
-void wl12xx_tx_complete(struct wl12xx *wl);
-void wl12xx_tx_flush(struct wl12xx *wl);
-
-#endif
#include "boot.h"
#include "event.h"
#include "acx.h"
-#include "tx.h"
+#include "wl1251_tx.h"
#include "rx.h"
#include "ps.h"
#include "init.h"
if (intr & WL1251_ACX_INTR_TX_RESULT) {
wl12xx_debug(DEBUG_IRQ, "WL1251_ACX_INTR_TX_RESULT");
- wl12xx_tx_complete(wl);
+ wl1251_tx_complete(wl);
}
if (intr & (WL1251_ACX_INTR_EVENT_A | WL1251_ACX_INTR_EVENT_B)) {
wl->chip.op_hw_init = wl1251_hw_init;
wl->chip.op_plt_init = wl1251_plt_init;
wl->chip.op_fw_version = wl1251_fw_version;
+ wl->chip.op_tx_flush = wl1251_tx_flush;
wl->chip.p_table = wl1251_part_table;
wl->chip.acx_reg_table = wl1251_acx_reg_table;
INIT_WORK(&wl->irq_work, wl1251_irq_work);
+ INIT_WORK(&wl->tx_work, wl1251_tx_work);
+
}
--- /dev/null
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "wl12xx.h"
+#include "reg.h"
+#include "spi.h"
+#include "wl1251_tx.h"
+#include "ps.h"
+
+static bool wl1251_tx_double_buffer_busy(struct wl12xx *wl, u32 data_out_count)
+{
+ int used, data_in_count;
+
+ data_in_count = wl->data_in_count;
+
+ if (data_in_count < data_out_count)
+ /* data_in_count has wrapped */
+ data_in_count += TX_STATUS_DATA_OUT_COUNT_MASK + 1;
+
+ used = data_in_count - data_out_count;
+
+ WARN_ON(used < 0);
+ WARN_ON(used > DP_TX_PACKET_RING_CHUNK_NUM);
+
+ if (used >= DP_TX_PACKET_RING_CHUNK_NUM)
+ return true;
+ else
+ return false;
+}
+
+static int wl1251_tx_path_status(struct wl12xx *wl)
+{
+ u32 status, addr, data_out_count;
+ bool busy;
+
+ addr = wl->data_path->tx_control_addr;
+ status = wl12xx_mem_read32(wl, addr);
+ data_out_count = status & TX_STATUS_DATA_OUT_COUNT_MASK;
+ busy = wl1251_tx_double_buffer_busy(wl, data_out_count);
+
+ if (busy)
+ return -EBUSY;
+
+ return 0;
+}
+
+static int wl1251_tx_id(struct wl12xx *wl, struct sk_buff *skb)
+{
+ int i;
+
+ for (i = 0; i < FW_TX_CMPLT_BLOCK_SIZE; i++)
+ if (wl->tx_frames[i] == NULL) {
+ wl->tx_frames[i] = skb;
+ return i;
+ }
+
+ return -EBUSY;
+}
+
+static void wl1251_tx_control(struct tx_double_buffer_desc *tx_hdr,
+ struct ieee80211_tx_info *control, u16 fc)
+{
+ *(u16 *)&tx_hdr->control = 0;
+
+ tx_hdr->control.rate_policy = 0;
+
+ /* 802.11 packets */
+ tx_hdr->control.packet_type = 0;
+
+ if (control->flags & IEEE80211_TX_CTL_NO_ACK)
+ tx_hdr->control.ack_policy = 1;
+
+ tx_hdr->control.tx_complete = 1;
+
+ if ((fc & IEEE80211_FTYPE_DATA) &&
+ ((fc & IEEE80211_STYPE_QOS_DATA) ||
+ (fc & IEEE80211_STYPE_QOS_NULLFUNC)))
+ tx_hdr->control.qos = 1;
+}
+
+/* RSN + MIC = 8 + 8 = 16 bytes (worst case - AES). */
+#define MAX_MSDU_SECURITY_LENGTH 16
+#define MAX_MPDU_SECURITY_LENGTH 16
+#define WLAN_QOS_HDR_LEN 26
+#define MAX_MPDU_HEADER_AND_SECURITY (MAX_MPDU_SECURITY_LENGTH + \
+ WLAN_QOS_HDR_LEN)
+#define HW_BLOCK_SIZE 252
+static void wl1251_tx_frag_block_num(struct tx_double_buffer_desc *tx_hdr)
+{
+ u16 payload_len, frag_threshold, mem_blocks;
+ u16 num_mpdus, mem_blocks_per_frag;
+
+ frag_threshold = IEEE80211_MAX_FRAG_THRESHOLD;
+ tx_hdr->frag_threshold = cpu_to_le16(frag_threshold);
+
+ payload_len = tx_hdr->length + MAX_MSDU_SECURITY_LENGTH;
+
+ if (payload_len > frag_threshold) {
+ mem_blocks_per_frag =
+ ((frag_threshold + MAX_MPDU_HEADER_AND_SECURITY) /
+ HW_BLOCK_SIZE) + 1;
+ num_mpdus = payload_len / frag_threshold;
+ mem_blocks = num_mpdus * mem_blocks_per_frag;
+ payload_len -= num_mpdus * frag_threshold;
+ num_mpdus++;
+
+ } else {
+ mem_blocks_per_frag = 0;
+ mem_blocks = 0;
+ num_mpdus = 1;
+ }
+
+ mem_blocks += (payload_len / HW_BLOCK_SIZE) + 1;
+
+ if (num_mpdus > 1)
+ mem_blocks += min(num_mpdus, mem_blocks_per_frag);
+
+ tx_hdr->num_mem_blocks = mem_blocks;
+}
+
+static int wl1251_tx_fill_hdr(struct wl12xx *wl, struct sk_buff *skb,
+ struct ieee80211_tx_info *control)
+{
+ struct tx_double_buffer_desc *tx_hdr;
+ struct ieee80211_rate *rate;
+ int id;
+ u16 fc;
+
+ if (!skb)
+ return -EINVAL;
+
+ id = wl1251_tx_id(wl, skb);
+ if (id < 0)
+ return id;
+
+ fc = *(u16 *)skb->data;
+ tx_hdr = (struct tx_double_buffer_desc *) skb_push(skb,
+ sizeof(*tx_hdr));
+
+ tx_hdr->length = cpu_to_le16(skb->len - sizeof(*tx_hdr));
+ rate = ieee80211_get_tx_rate(wl->hw, control);
+ tx_hdr->rate = cpu_to_le16(rate->hw_value);
+ tx_hdr->expiry_time = cpu_to_le32(1 << 16);
+ tx_hdr->id = id;
+
+ /* FIXME: how to get the correct queue id? */
+ tx_hdr->xmit_queue = 0;
+
+ wl1251_tx_control(tx_hdr, control, fc);
+ wl1251_tx_frag_block_num(tx_hdr);
+
+ return 0;
+}
+
+/* We copy the packet to the target */
+static int wl1251_tx_send_packet(struct wl12xx *wl, struct sk_buff *skb,
+ struct ieee80211_tx_info *control)
+{
+ struct tx_double_buffer_desc *tx_hdr;
+ int len;
+ u32 addr;
+
+ if (!skb)
+ return -EINVAL;
+
+ tx_hdr = (struct tx_double_buffer_desc *) skb->data;
+
+ if (control->control.hw_key &&
+ control->control.hw_key->alg == ALG_TKIP) {
+ int hdrlen;
+ u16 fc;
+ u8 *pos;
+
+ fc = *(u16 *)(skb->data + sizeof(*tx_hdr));
+ tx_hdr->length += WL1251_TKIP_IV_SPACE;
+
+ hdrlen = ieee80211_hdrlen(fc);
+
+ pos = skb_push(skb, WL1251_TKIP_IV_SPACE);
+ memmove(pos, pos + WL1251_TKIP_IV_SPACE,
+ sizeof(*tx_hdr) + hdrlen);
+ }
+
+ /* Revisit. This is a workaround for getting non-aligned packets.
+ This happens at least with EAPOL packets from the user space.
+ Our DMA requires packets to be aligned on a 4-byte boundary.
+ */
+ if (unlikely((long)skb->data & 0x03)) {
+ int offset = (4 - (long)skb->data) & 0x03;
+ wl12xx_debug(DEBUG_TX, "skb offset %d", offset);
+
+ /* check whether the current skb can be used */
+ if (!skb_cloned(skb) && (skb_tailroom(skb) >= offset)) {
+ unsigned char *src = skb->data;
+
+ /* align the buffer on a 4-byte boundary */
+ skb_reserve(skb, offset);
+ memmove(skb->data, src, skb->len);
+ } else {
+ wl12xx_info("No handler, fixme!");
+ return -EINVAL;
+ }
+ }
+
+ /* Our skb->data at this point includes the HW header */
+ len = WL1251_TX_ALIGN(skb->len);
+
+ if (wl->data_in_count & 0x1)
+ addr = wl->data_path->tx_packet_ring_addr +
+ wl->data_path->tx_packet_ring_chunk_size;
+ else
+ addr = wl->data_path->tx_packet_ring_addr;
+
+ wl12xx_spi_mem_write(wl, addr, skb->data, len);
+
+ wl12xx_debug(DEBUG_TX, "tx id %u skb 0x%p payload %u rate 0x%x",
+ tx_hdr->id, skb, tx_hdr->length, tx_hdr->rate);
+
+ return 0;
+}
+
+static void wl1251_tx_trigger(struct wl12xx *wl)
+{
+ u32 data, addr;
+
+ if (wl->data_in_count & 0x1) {
+ addr = ACX_REG_INTERRUPT_TRIG_H;
+ data = INTR_TRIG_TX_PROC1;
+ } else {
+ addr = ACX_REG_INTERRUPT_TRIG;
+ data = INTR_TRIG_TX_PROC0;
+ }
+
+ wl12xx_reg_write32(wl, addr, data);
+
+ /* Bumping data in */
+ wl->data_in_count = (wl->data_in_count + 1) &
+ TX_STATUS_DATA_OUT_COUNT_MASK;
+}
+
+/* caller must hold wl->mutex */
+static int wl1251_tx_frame(struct wl12xx *wl, struct sk_buff *skb)
+{
+ struct ieee80211_tx_info *info;
+ int ret = 0;
+ u8 idx;
+
+ info = IEEE80211_SKB_CB(skb);
+
+ if (info->control.hw_key) {
+ idx = info->control.hw_key->hw_key_idx;
+ if (unlikely(wl->default_key != idx)) {
+ ret = wl12xx_acx_default_key(wl, idx);
+ if (ret < 0)
+ return ret;
+ }
+ }
+
+ ret = wl1251_tx_path_status(wl);
+ if (ret < 0)
+ return ret;
+
+ ret = wl1251_tx_fill_hdr(wl, skb, info);
+ if (ret < 0)
+ return ret;
+
+ ret = wl1251_tx_send_packet(wl, skb, info);
+ if (ret < 0)
+ return ret;
+
+ wl1251_tx_trigger(wl);
+
+ return ret;
+}
+
+void wl1251_tx_work(struct work_struct *work)
+{
+ struct wl12xx *wl = container_of(work, struct wl12xx, tx_work);
+ struct sk_buff *skb;
+ bool woken_up = false;
+ int ret;
+
+ mutex_lock(&wl->mutex);
+
+ if (unlikely(wl->state == WL12XX_STATE_OFF))
+ goto out;
+
+ while ((skb = skb_dequeue(&wl->tx_queue))) {
+ if (!woken_up) {
+ wl12xx_ps_elp_wakeup(wl);
+ woken_up = true;
+ }
+
+ ret = wl1251_tx_frame(wl, skb);
+ if (ret == -EBUSY) {
+ /* firmware buffer is full, stop queues */
+ wl12xx_debug(DEBUG_TX, "tx_work: fw buffer full, "
+ "stop queues");
+ ieee80211_stop_queues(wl->hw);
+ wl->tx_queue_stopped = true;
+ skb_queue_head(&wl->tx_queue, skb);
+ goto out;
+ } else if (ret < 0) {
+ dev_kfree_skb(skb);
+ goto out;
+ }
+ }
+
+out:
+ if (woken_up)
+ wl12xx_ps_elp_sleep(wl);
+
+ mutex_unlock(&wl->mutex);
+}
+
+static const char *wl1251_tx_parse_status(u8 status)
+{
+ /* 8 bit status field, one character per bit plus null */
+ static char buf[9];
+ int i = 0;
+
+ memset(buf, 0, sizeof(buf));
+
+ if (status & TX_DMA_ERROR)
+ buf[i++] = 'm';
+ if (status & TX_DISABLED)
+ buf[i++] = 'd';
+ if (status & TX_RETRY_EXCEEDED)
+ buf[i++] = 'r';
+ if (status & TX_TIMEOUT)
+ buf[i++] = 't';
+ if (status & TX_KEY_NOT_FOUND)
+ buf[i++] = 'k';
+ if (status & TX_ENCRYPT_FAIL)
+ buf[i++] = 'e';
+ if (status & TX_UNAVAILABLE_PRIORITY)
+ buf[i++] = 'p';
+
+ /* bit 0 is unused apparently */
+
+ return buf;
+}
+
+static void wl1251_tx_packet_cb(struct wl12xx *wl,
+ struct tx_result *result)
+{
+ struct ieee80211_tx_info *info;
+ struct sk_buff *skb;
+ int hdrlen, ret;
+ u8 *frame;
+
+ skb = wl->tx_frames[result->id];
+ if (skb == NULL) {
+ wl12xx_error("SKB for packet %d is NULL", result->id);
+ return;
+ }
+
+ info = IEEE80211_SKB_CB(skb);
+
+ if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) &&
+ (result->status == TX_SUCCESS))
+ info->flags |= IEEE80211_TX_STAT_ACK;
+
+ info->status.rates[0].count = result->ack_failures + 1;
+ wl->stats.retry_count += result->ack_failures;
+
+ /*
+ * We have to remove our private TX header before pushing
+ * the skb back to mac80211.
+ */
+ frame = skb_pull(skb, sizeof(struct tx_double_buffer_desc));
+ if (info->control.hw_key &&
+ info->control.hw_key->alg == ALG_TKIP) {
+ hdrlen = ieee80211_get_hdrlen_from_skb(skb);
+ memmove(frame + WL1251_TKIP_IV_SPACE, frame, hdrlen);
+ skb_pull(skb, WL1251_TKIP_IV_SPACE);
+ }
+
+ wl12xx_debug(DEBUG_TX, "tx status id %u skb 0x%p failures %u rate 0x%x"
+ " status 0x%x (%s)",
+ result->id, skb, result->ack_failures, result->rate,
+ result->status, wl1251_tx_parse_status(result->status));
+
+
+ ieee80211_tx_status(wl->hw, skb);
+
+ wl->tx_frames[result->id] = NULL;
+
+ if (wl->tx_queue_stopped) {
+ wl12xx_debug(DEBUG_TX, "cb: queue was stopped");
+
+ skb = skb_dequeue(&wl->tx_queue);
+
+ /* The skb can be NULL because tx_work might have been
+ scheduled before the queue was stopped making the
+ queue empty */
+
+ if (skb) {
+ ret = wl1251_tx_frame(wl, skb);
+ if (ret == -EBUSY) {
+ /* firmware buffer is still full */
+ wl12xx_debug(DEBUG_TX, "cb: fw buffer "
+ "still full");
+ skb_queue_head(&wl->tx_queue, skb);
+ return;
+ } else if (ret < 0) {
+ dev_kfree_skb(skb);
+ return;
+ }
+ }
+
+ wl12xx_debug(DEBUG_TX, "cb: waking queues");
+ ieee80211_wake_queues(wl->hw);
+ wl->tx_queue_stopped = false;
+ }
+}
+
+/* Called upon reception of a TX complete interrupt */
+void wl1251_tx_complete(struct wl12xx *wl)
+{
+ int i, result_index, num_complete = 0;
+ struct tx_result result[FW_TX_CMPLT_BLOCK_SIZE], *result_ptr;
+
+ if (unlikely(wl->state != WL12XX_STATE_ON))
+ return;
+
+ /* First we read the result */
+ wl12xx_spi_mem_read(wl, wl->data_path->tx_complete_addr,
+ result, sizeof(result));
+
+ result_index = wl->next_tx_complete;
+
+ for (i = 0; i < ARRAY_SIZE(result); i++) {
+ result_ptr = &result[result_index];
+
+ if (result_ptr->done_1 == 1 &&
+ result_ptr->done_2 == 1) {
+ wl1251_tx_packet_cb(wl, result_ptr);
+
+ result_ptr->done_1 = 0;
+ result_ptr->done_2 = 0;
+
+ result_index = (result_index + 1) &
+ (FW_TX_CMPLT_BLOCK_SIZE - 1);
+ num_complete++;
+ } else {
+ break;
+ }
+ }
+
+ /* Every completed frame needs to be acknowledged */
+ if (num_complete) {
+ /*
+ * If we've wrapped, we have to clear
+ * the results in 2 steps.
+ */
+ if (result_index > wl->next_tx_complete) {
+ /* Only 1 write is needed */
+ wl12xx_spi_mem_write(wl,
+ wl->data_path->tx_complete_addr +
+ (wl->next_tx_complete *
+ sizeof(struct tx_result)),
+ &result[wl->next_tx_complete],
+ num_complete *
+ sizeof(struct tx_result));
+
+
+ } else if (result_index < wl->next_tx_complete) {
+ /* 2 writes are needed */
+ wl12xx_spi_mem_write(wl,
+ wl->data_path->tx_complete_addr +
+ (wl->next_tx_complete *
+ sizeof(struct tx_result)),
+ &result[wl->next_tx_complete],
+ (FW_TX_CMPLT_BLOCK_SIZE -
+ wl->next_tx_complete) *
+ sizeof(struct tx_result));
+
+ wl12xx_spi_mem_write(wl,
+ wl->data_path->tx_complete_addr,
+ result,
+ (num_complete -
+ FW_TX_CMPLT_BLOCK_SIZE +
+ wl->next_tx_complete) *
+ sizeof(struct tx_result));
+
+ } else {
+ /* We have to write the whole array */
+ wl12xx_spi_mem_write(wl,
+ wl->data_path->tx_complete_addr,
+ result,
+ FW_TX_CMPLT_BLOCK_SIZE *
+ sizeof(struct tx_result));
+ }
+
+ }
+
+ wl->next_tx_complete = result_index;
+}
+
+/* caller must hold wl->mutex */
+void wl1251_tx_flush(struct wl12xx *wl)
+{
+ int i;
+ struct sk_buff *skb;
+ struct ieee80211_tx_info *info;
+
+ /* TX failure */
+/* control->flags = 0; FIXME */
+
+ while ((skb = skb_dequeue(&wl->tx_queue))) {
+ info = IEEE80211_SKB_CB(skb);
+
+ wl12xx_debug(DEBUG_TX, "flushing skb 0x%p", skb);
+
+ if (!(info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS))
+ continue;
+
+ ieee80211_tx_status(wl->hw, skb);
+ }
+
+ for (i = 0; i < FW_TX_CMPLT_BLOCK_SIZE; i++)
+ if (wl->tx_frames[i] != NULL) {
+ skb = wl->tx_frames[i];
+ info = IEEE80211_SKB_CB(skb);
+
+ if (!(info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS))
+ continue;
+
+ ieee80211_tx_status(wl->hw, skb);
+ wl->tx_frames[i] = NULL;
+ }
+}
--- /dev/null
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL1251_TX_H__
+#define __WL1251_TX_H__
+
+#include <linux/bitops.h>
+
+/*
+ *
+ * TX PATH
+ *
+ * The Tx path uses a double buffer and a tx_control structure, each located
+ * at a fixed address in the device's memory. On startup, the host retrieves
+ * the pointers to these addresses. A double buffer allows for continuous data
+ * flow towards the device. The host keeps track of which buffer is available
+ * and alternates between these two buffers on a per packet basis.
+ *
+ * The size of each of the two buffers is large enough to hold the longest
+ * 802.3 packet - maximum size Ethernet packet + header + descriptor.
+ * TX complete indication will be received a-synchronously in a TX done cyclic
+ * buffer which is composed of 16 tx_result descriptors structures and is used
+ * in a cyclic manner.
+ *
+ * The TX (HOST) procedure is as follows:
+ * 1. Read the Tx path status, that will give the data_out_count.
+ * 2. goto 1, if not possible.
+ * i.e. if data_in_count - data_out_count >= HwBuffer size (2 for double
+ * buffer).
+ * 3. Copy the packet (preceded by double_buffer_desc), if possible.
+ * i.e. if data_in_count - data_out_count < HwBuffer size (2 for double
+ * buffer).
+ * 4. increment data_in_count.
+ * 5. Inform the firmware by generating a firmware internal interrupt.
+ * 6. FW will increment data_out_count after it reads the buffer.
+ *
+ * The TX Complete procedure:
+ * 1. To get a TX complete indication the host enables the tx_complete flag in
+ * the TX descriptor Structure.
+ * 2. For each packet with a Tx Complete field set, the firmware adds the
+ * transmit results to the cyclic buffer (txDoneRing) and sets both done_1
+ * and done_2 to 1 to indicate driver ownership.
+ * 3. The firmware sends a Tx Complete interrupt to the host to trigger the
+ * host to process the new data. Note: interrupt will be send per packet if
+ * TX complete indication was requested in tx_control or per crossing
+ * aggregation threshold.
+ * 4. After receiving the Tx Complete interrupt, the host reads the
+ * TxDescriptorDone information in a cyclic manner and clears both done_1
+ * and done_2 fields.
+ *
+ */
+
+#define TX_COMPLETE_REQUIRED_BIT 0x80
+#define TX_STATUS_DATA_OUT_COUNT_MASK 0xf
+
+#define WL1251_TX_ALIGN_TO 4
+#define WL1251_TX_ALIGN(len) (((len) + WL1251_TX_ALIGN_TO - 1) & \
+ ~(WL1251_TX_ALIGN_TO - 1))
+#define WL1251_TKIP_IV_SPACE 4
+
+struct tx_control {
+ /* Rate Policy (class) index */
+ unsigned rate_policy:3;
+
+ /* When set, no ack policy is expected */
+ unsigned ack_policy:1;
+
+ /*
+ * Packet type:
+ * 0 -> 802.11
+ * 1 -> 802.3
+ * 2 -> IP
+ * 3 -> raw codec
+ */
+ unsigned packet_type:2;
+
+ /* If set, this is a QoS-Null or QoS-Data frame */
+ unsigned qos:1;
+
+ /*
+ * If set, the target triggers the tx complete INT
+ * upon frame sending completion.
+ */
+ unsigned tx_complete:1;
+
+ /* 2 bytes padding before packet header */
+ unsigned xfer_pad:1;
+
+ unsigned reserved:7;
+} __attribute__ ((packed));
+
+
+struct tx_double_buffer_desc {
+ /* Length of payload, including headers. */
+ u16 length;
+
+ /*
+ * A bit mask that specifies the initial rate to be used
+ * Possible values are:
+ * 0x0001 - 1Mbits
+ * 0x0002 - 2Mbits
+ * 0x0004 - 5.5Mbits
+ * 0x0008 - 6Mbits
+ * 0x0010 - 9Mbits
+ * 0x0020 - 11Mbits
+ * 0x0040 - 12Mbits
+ * 0x0080 - 18Mbits
+ * 0x0100 - 22Mbits
+ * 0x0200 - 24Mbits
+ * 0x0400 - 36Mbits
+ * 0x0800 - 48Mbits
+ * 0x1000 - 54Mbits
+ */
+ u16 rate;
+
+ /* Time in us that a packet can spend in the target */
+ u32 expiry_time;
+
+ /* index of the TX queue used for this packet */
+ u8 xmit_queue;
+
+ /* Used to identify a packet */
+ u8 id;
+
+ struct tx_control control;
+
+ /*
+ * The FW should cut the packet into fragments
+ * of this size.
+ */
+ u16 frag_threshold;
+
+ /* Numbers of HW queue blocks to be allocated */
+ u8 num_mem_blocks;
+
+ u8 reserved;
+} __attribute__ ((packed));
+
+enum {
+ TX_SUCCESS = 0,
+ TX_DMA_ERROR = BIT(7),
+ TX_DISABLED = BIT(6),
+ TX_RETRY_EXCEEDED = BIT(5),
+ TX_TIMEOUT = BIT(4),
+ TX_KEY_NOT_FOUND = BIT(3),
+ TX_ENCRYPT_FAIL = BIT(2),
+ TX_UNAVAILABLE_PRIORITY = BIT(1),
+};
+
+struct tx_result {
+ /*
+ * Ownership synchronization between the host and
+ * the firmware. If done_1 and done_2 are cleared,
+ * owned by the FW (no info ready).
+ */
+ u8 done_1;
+
+ /* same as double_buffer_desc->id */
+ u8 id;
+
+ /*
+ * Total air access duration consumed by this
+ * packet, including all retries and overheads.
+ */
+ u16 medium_usage;
+
+ /* Total media delay (from 1st EDCA AIFS counter until TX Complete). */
+ u32 medium_delay;
+
+ /* Time between host xfer and tx complete */
+ u32 fw_hnadling_time;
+
+ /* The LS-byte of the last TKIP sequence number. */
+ u8 lsb_seq_num;
+
+ /* Retry count */
+ u8 ack_failures;
+
+ /* At which rate we got a ACK */
+ u16 rate;
+
+ u16 reserved;
+
+ /* TX_* */
+ u8 status;
+
+ /* See done_1 */
+ u8 done_2;
+} __attribute__ ((packed));
+
+void wl1251_tx_work(struct work_struct *work);
+void wl1251_tx_complete(struct wl12xx *wl);
+void wl1251_tx_flush(struct wl12xx *wl);
+
+#endif
void (*op_target_enable_interrupts)(struct wl12xx *wl);
int (*op_hw_init)(struct wl12xx *wl);
int (*op_plt_init)(struct wl12xx *wl);
+ void (*op_tx_flush)(struct wl12xx *wl);
void (*op_fw_version)(struct wl12xx *wl);
struct wl12xx_partition_set *p_table;
projects / GitHub / mt8127 / android_kernel_alcatel_ttab.git / commitdiff